Metal cuttingSMW AUTOBLOK RX4-ZSW

SMW AUTOBLOK RX4-ZSW

Condition: excellent (used), Year of construction: 2012, One Modula Lift ML 50D for sale. The Vertical Lift Module has been regularly serviced by the manufacturer since it was installed and is in great condition. The trays have a width of 4,100 mm and a depth of 860 mm, providing 3.53 m² of storage space per tray. With 50 trays, the total storage area is 176.5 m². Each tray can hold up to 500 kg, giving a total capacity of 25,000 kg for all 50 trays. The Vertical Lift Module is located in a protected area with a mezzanine, which has helped keep the cladding and exterior in excellent condition. Specifications: Lodsv Uxrvjpfx Ah Ssru Manufacturer: Modula Year of Manufacture: 2012 Model: Modula Lift ML 50D Height: 6,200 mm Width (Vertical Lift Module / Tray): 4,500 mm / 4,100 mm Depth (Vertical Lift Module / Tray): 3.058 mm / 860 mm Number of Trays / Tray Height: About 50 trays / 120 mm high edge Maximum Weight per Tray: 500 kg Electronics: 400 V, 20 A

Condition: good (used), Year of construction: 2015, functionality: fully functional, travel distance X-axis: 1,400 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,350 mm, workpiece weight (max.): 3,000 kg, spindle speed (max.): 15,000 rpm, coolant supply: 40 bar, tool weight: 27,000 g, We offer in good condition DMG Mori NHX8000 from 2015 with following options: 30/25 KW 15.000 RPM Spindle SK50 Mapps 4S Control 60 tool ATC 800x800 pallet 3.000 kg max table load Lrsdpfxszlqw Ie Ah Sou Signal light 40 bar Internal coolant Touch probe Machine will be in stock in 2 weeks

Year of construction: 2002, condition: not inspected (used), Robot no control panel + connection cables Lodpfegu U Itjx Ah Seru Used, untested robot. No technical documentation available. Not tested.

Condition: excellent (used), Year of construction: 2020, travel distance X-axis: 8,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 2,500 mm, rapid traverse X-axis: 35,000 m/min, rapid traverse Y-axis: 40,000 m/min, rapid traverse Z-axis: 40,000 m/min, total width: 5,800 mm, total height: 4,500 mm, total length: 13,500 mm, table length: 10,000 mm, table width: 1,250 mm, Travelling Column High performance, precision and machining power Linear guiding of RAM combined with Hydrostatic Guiding HDS ACD2 Milling head with 5000 Rpm and 1400 Nm torq Aitek ATC chain 60 position with L=400 and 250 diameter x 35 Kg Filtration with IKZ 15 Bar Chip conveyor BLUM 3D Measuring probe Wide bed linear guided in X-Travel W=930 mm Rotary table driver prepared in E-Cabinet X-Axis: 8000mm Y-Axis: 1300mm Z-Axis: 2500mm Table Length: 10000mm Table Width: 1250mm Power on spindle: 40kW Spindle speeds: 5000Rpm Spindle Taper: 40ISO/Bt/Mk Feed rate X-Axis: 35000mm/min. Lodpfx Aheyr Dmde Soru Feed rate Y-Axis: 40000mm/min. Feed rate Z-Axis: 40000mm/min. Millinghead auto-index:0.001 x 0.001 Gr° Working hours: 3800H Length: 13500mm Width: 5800mm Height: 4500mm Weight: 45000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 1985, functionality: fully functional, pressing force: 4,000 t, 5. Forging hammer SMERAL type KJH 4 Weight of the ram, kg: 1’800 Ram impact rated energy, kgm: 4’000 Number of ram strokes,1/min: 48 Ram stroke, mm: 500 Die camping area, mm: 286 x 600 Min. Die Height, mm: 350 Output of main motor, kW: 45 Lenght of the machine, mm: 3’100 Widht of the machine, mm: 1’900 Height of the machine, mm: 3’900 Weight of the machine, kg: 27’000 Ljdpfxswbgino Ah Sjru

Condition: good (used), Year of construction: 2009, Control: Heidenhain iTNC 530 Spindle * Diameter: 180 mm * Taper: ISO 50 * Power: 51 kW * Speed: 2,000 rpm (2-speed gearbox) * Torque: 2,668 Nm * Spindle support: 550 mm * Internal high-pressure coolant Travel distances * X: 5,000 mm * Y: 3,500 mm * Z: 2,350 mm Ledey R N Iljpfx Ah Soru * W: 1,000 mm (quill permanently extended 200 mm, at maximum travel – total reach 1,200 mm) Table * Size: 2,000 × 2,500 mm * Load capacity: 28 tons * Hydrostatically supported * B-axis positioning: 0.001° (double pinion, backlash-free) Other features * Tool changer: 60 positions * Siemens axis and spindle motors * Linear scales on all axes + rotary encoder on rotary axis * Handwheel HR 410 * Chip conveyor

Condition: used, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of manufacture: 2007 Maximum rolling force: 24 tons Maximum tool diameter: 270 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Maximum tool/reception length: 180 mm Maximum workpiece diameter: 50 mm Hydraulic motor power: 3 kW Roll drive motor power: approx. 5.5 kW Electrical connection: 400 Volt, 50 Hz, 10 kW - Pivotable roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gearbox shift - Hydraulic unit integrated in the machine base - Operating manual with electrical schematic Lrsdpfx Ahouz If No Sou Space requirements (L x W x H): 2,000 x 1,450 x 1,900 mm Weight: approx. 3 tons Very good condition Plunge Rolling: The thread rolling tools, having the same pitch as the workpiece, form the thread by penetrating the workpiece up to the nominal diameter. The maximum thread length is limited to the width of the rolling dies. Through-feed Rolling: Used when the thread length is greater than the width of the rolling dies. Through-feed tools are divided into three sections – entry, calibration, and exit. Knurling rolls have no pitch and are swiveled at the lead angle corresponding to that of the profile to be rolled. Lead angle rolls differ from knurling rolls by having a pitch in the profile. The sum of the lead angle and swivel angle results in the effective lead angle in the workpiece.

Condition: excellent (used), Year of construction: 2019, operating hours: 31,800 h, functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 475 mm, feed rate X-axis: 42,000 m/min, feed rate Y-axis: 42,000 m/min, feed rate Z-axis: 42,000 m/min, controller manufacturer: Siemens, controller model: 840d, total height: 2,750 mm, total length: 2,850 mm, total width: 2,350 mm, rotational speed (max.): 20,000 rpm, overall weight: 7,500 kg, spindle speed (max.): 20,000 rpm, operating hours of spindle: 13,300 h, coolant supply: 40 bar, number of spindles: 1, number of slots in tool magazine: 30, Equipment: chip conveyor, For sale: a DMU 50 3rd generation. The machine was on display in the DMG showroom from 2019 to October 2021. Lredpfx Aho Aaz Nno Sju The following features are included: CELOS with Siemens 840D sl Operate Tool magazine with 30 positions, HSK-A63 Direct path measuring system IKZ/chip conveyor package, IKZ 40 bar, 600 liter belt filter system Coolant/air blow-off switchover Work area flushing Double-layer filter, 25 µm Rotating viewing window Spindle speed: 20,000 rpm Flushing gun for chip removal Oil and emulsion separator Measuring probe, infrared TS649 Laser tool measurement 3D Quick SET MPC Machine Protection Control Signal light, 4-color Cooling unit for control cabinet DXF Reader Operating mode 4 Electronic handwheel DMG Mori Netservice IoT Connector Service Agent (Celeos) Messenger (Celos)

Condition: good (used), spindle bore: 260 mm, spindle speed (max.): 900 rpm, travel distance X-axis: 3,200 mm, total height: 3,409 mm, total length: 9,800 mm, total width: 3,609 mm, feed length Z-axis: 530 mm, overall weight: 34,000 kg, CNC Lathe with c-axis Okuma - LU-45M SuperBigBore MACH-ID 9778 Make: Okuma Type: LU-45M SuperBigBore Control: OSP-P200L X-Axis: 3200mm Z-Axis: 530mm Spindle bore:260mm Speedrange: 900Rpm Lrsdpfxjztctqo Ah Ssu Length: 9800mm Width: 3609mm Height: 3409mm Weight: 34000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: like new (used), Year of construction: 2008, operating hours: 6,200 h, functionality: fully functional, clamping force: 4,200 kN, screw diameter: 75 mm, Krauss-Maffei KM 420-2000 CX Krauss-Maffei injection molding machine, 420 tons of clamping force. Only 6,000 hours of automatic operation. Year of manufacture 2008. MC5 control. Screw diameter 75 mm. Extras: 8 hot runner zones. 2 cores on fixed platen, 2 cores on moving platen. 1 pneumatic valve on moving platen. The injection molding machine is delivered reconditioned by UK Transitus' expert technical team. We can offer commissioning at our clients' facilities, ensuring operation upon completion of the installation. Technical Details 75mm screw Lrjdpowq D Efjfx Ah Ssu Injection pressure: 1635 bar Shot volume: 1237 cm3 Shot weight: 1126 g Maximum distance between plates: 1400 mm Minimum mold thickness: 380 mm Opening stroke: 1020 mm Distance between columns: 900 x 800 mm Plate dimensions: 1270 x 1230 mm 75mm screw Clamping force: 4200 kN Year of manufacture: 2008 Working hours: 6282