Robot welding system plasma welding table

Stäubli TX90

Condition: like new (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: F21/0023666, Equipment: documentation/manual, Technical Specifications: Maximum load: 20 kg Nominal load: 7 kg Reach: 1000 mm Number of degrees of freedom: 6 Repeatability according to ISO 9283: ± 0.03 mm Pneumatic connection: 2 direct lines between base and forearm 2x solenoid valve 5/2 way bistable (compressed air) Electrical connection on the arm: 17 electrical I/O lines Multibus cable inside the arm: 13 electrical lines, 4 multibus cat5e lines, DIN M12 Standards and degrees of protection: Standard for clean rooms - ISO 14644-1: Level 5 Protection class (wrist): IP65 (*IP67) Safety: Absolute encoders up to SIL3-PLe class ensuring the highest level of safety. Management and License: Iiedpspd In Defx Ah Uek CS9 management with VAL3 license Controller power supply: 3x400-480V-50/60Hz Other equipment: Control panel (with 5m cable). This robot not only offers impressive technical parameters, but also the highest safety standards thanks to SIL3-PLe class encoders. With a wide range of applications and precise repeatability, it is ideal for various industrial purposes. For more information or a tour, contact us by email or phone (in English). We are here for your questions and look forward to your interest.

Year of construction: 2024, condition: new, Working space 1100 x 660 x 816 mm (W x D x H) Blasting chamber Dust-tight vacuum cabin in stable sheet steel construction Working gloves Isdpfjh Hxubox Ah Ueik special rubber, wear resistant, cotton inside, firmly connected to the cabin against dust leakage Doors Blasting chamber W x D x H = 1100 x 660 x 816 mm Two side doors, dust-tight closing, double-walled, sound-absorbing foam, lockable, with electrical shut-off safety device Blasting media recovery Via coordinated MHG recovery system Operation ON/OFF switch for suction and lighting, pressure regulator, manometer and foot switch Viewing panels

Condition: excellent (used), Stäubli Type: TX90L Robot / CS8C Controller Six-axis robot with controller The high-performance robots of the TX90 series for medium payloads offer maximum flexibility for a wide range of applications thanks to their compact, slim design. Thanks to three mounting options: floor, wall, and ceiling, the six-axis robots are easy to integrate. The fully encapsulated design (IP 65) enables use in clean rooms or under aggressive environmental conditions. Features Fully encapsulated design with internal supply lines Rigid structure Multiple mounting options Patented Stäubli JCM gear modules Long reach Advantages Perfect component protection. Standard version in clean room class ISO 5. Easy to clean. Excellent dynamic path behavior High flexibility Precision, dynamics, and speed with reduced maintenance requirements Optimal use of the workspace Technical specifications TYPE TX90L Number of degrees of freedom: 6 Nominal payload: 6 kg Maximum payload: 15 kg Reach: 1200 mm Repeatability: ±0.035 mm Protection class (wrist) IP65 (IP67) Mounting options: Floor / Wall / Ceiling Stäubli CS8 CS8C controller Features Ethernet, fieldbus, digital inputs and outputs, serial interfaces Easy to integrate, 19-inch rack version, protection class IP20 All connections on the front Proven digital technology Advantages Open architecture Compact Good accessibility Reliable Technical specifications: Type CS8C Dimensions (H x W x D) 331 x 445 x 455 mm 481 x 445 x 455 mm Protection class IP20 (IP54 optional) RAM 64 MB RAM (min.) Storage capacity 128 MB (min.) Flash disk and USB port System/Programming language VAL 3 (multitasking interpreter language), PLC-IEC 61131-3 language Communication Serial interface RS232/422, Ethernet, ModBus/TCP server Type: Robot TX90L / Controller CS8C Condition: Used Iedpfx Ahowbqwcs Usik Scope of delivery: (See image) (Subject to change and errors in the technical specifications, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: good (used), Year of construction: 2018, functionality: fully functional, overall weight: 730 kg, load capacity: 14 kg, arm reach: 1,000 mm, ROBOTERARM Load capacity 14 kg Maximum reach (between axes 1 and 6):1000 mm Repeat accuracy - ISO 9283: ±0.03 mm ROTATION UNIT Maximum rotation angle:350° Safe positions:0° / ± 90° / 180° DRIVING UNIT Iiodpfxstqmiho Ah Usk Maximum speed:16.8 °/s Tool storage station:4 tools per storage station Tool changing system:MPS032 Maximum speed:0.6 m/s Position accuracy of the platform:± 10 mm, 1° Dimensions (without robot arm):890 x 1120 x 1000 mm (W x H x D) Number of laser scanners:3 (360° monitoring range) Height of the scanning level (safe for persons):150 mm Drive type:Differential drive TOTAL SYSTEM Navigation:based on laser scanner data Protection class wrist / arm / overall system:IP67 / IP65 / IP20 Average surface pressure on the floor max.:10 N/mm² Power supply:1 x 230 V / 16 A Interfaces WLAN, LAN, Fieldbus (1) Multi-coupling:Compressed air, power supply, 2x Cat5e, 26 x 1 mm² contacts Battery capacity:5.8 - 8.7 kWh Compressed air tank:0.75 l (2) / 7 bar Visual and acoustic effects:4 LED units, storage space for up to 16 audio files Weight:730 kg

Year of construction: 2019, condition: ready for operation (used), Connected load: 84kVA, length: 5065mm, width: 1100mm, height: 1530mm. Iisdpfeg A Trgjx Ah Uok

Condition: good (used), Year of construction: 2009, Stäubli t TX90 L with Controller CS8C. (2009) Number of axis: 6 Iiodev Hdk Ispfx Ah Usk Payload: 5 kg

Condition: good (used), Year of construction: 2011, Robot, Stäubli TX90 Lbmn, with CS8C control unit Panel and accessories - second-hand - : Price ex location: 14.250.-€ (net) Manufacturer: Stäubli Type: TX90 Year of manufacture: 2011 MachineNo.: F11/5G1VB1/A/01 Mass: 113kg Payload: 5kg Condition: good Iisdpfx Aeununpoh Uek Available: immediately Location: Warehouse Frankenberg / Saxony

Condition: as good as new (ex-display), Year of construction: 2023, air pressure: 5.9 bar, Next-generation air plasma system that significantly simplifies system operation for cutting and gouging up to 32 mm. Features automated process setup using advanced RFID-enabled SmartSYNC torch and a revolutionary one-piece consumable cartridge that provides traceable usage data. Technical data: Cutting performance: Recommended cutting capacity: 32 mm - 500 mm/min Maximum cutting capacity: 38 mm - 250 mm/min Severance capacity: 50 mm - 125 mm/min Piercing: 22 mm Typical gouging: Metal removal rate: 8.6 kg per hour Gouge profile: 6.6 mm (D) x 6.0 mm (W) Scope of delivery: Power cable, H105 handheld torch 23 m, 75° Iiodpfx Aew U Stqjh Uok Workpiece lead with clamp, Operating manual Option: Hypertherm cartridge reader, software

Condition: like new (used), Year of construction: 2020, operating hours: 550 h, functionality: fully functional, machine/vehicle number: F/20/0020976/A/001, Maximum load capacity: Up to 14 kg Reach: 1000 mm Number of degrees of freedom: 6 Repeatability: ± 0.02 mm Pneumatic connection: 2 direct lines between base and forearm 2x 5/2-way bistable solenoid valves (compressed air) Electrical connection on arm: 17 electrical I/O lines Multibus cable in arm: 13 electrical lines, 4 Multibus Cat5e lines, DIN M12 Standards and protection ratings: Cleanroom standard – ISO 14644-1: Level 5 Protection rating (wrist): IP65 / (IP67 with overpressure unit) Isdpexck Rijfx Ah Ueik Safety: Up to Class SIL3-PLe (collaborative operation with humans: Safe limited speed, Safe stop, Safe zone, Safe tool) Control and license: CS9 controller with VAL3 license Power supply: 400-480V-50/60Hz Connectivity: UPC UA / IP67 EtherCat I/O modules for connecting additional equipment, shielded Ethernet Cat5e for multi-gripper, camera and sensors Horizontal cable outlet

Condition: new, Year of construction: 2018, operating hours: 9,000 h, functionality: fully functional, overall weight: 110 kg, load capacity: 14 kg, arm reach: 1,000 mm, pivoting range: 360 °, repeat accuracy: 0.03 mm, Equipment: documentation/manual, For Sale: Stäubli TX90 Industrial Robot – High Precision, Lightly Used Model: Stäubli TX90 Reach: 1000 mm Repeatability: ±0.03 mm Operating hours: only 9000 mth (powered on, not in continuous operation) The robot is in excellent technical condition, fully functional, and ready for immediate use. Perfect for applications such as handling, assembly, gluing, dispensing, machine tending, or light machining. ➡️ Key advantages of the TX90: Compact design with optimal 1000 mm reach High dynamics and accuracy (±0.03 mm) Iodjxuwghspfx Ah Ueik Fully enclosed structure (IP65 / IP67 depending on configuration) – suitable even for demanding environments Compatible with CS8 control systems

Condition: refurbished (used), Year of construction: 2004, measuring range X-axis: 900 mm, measuring range Y-axis: 2,000 mm, measuring range Z-axis: 600 mm, Mitutoyo CMM Crysta Apex C9206 Measuring ranges 900x2000x600mm Accuracy 1,7 + 3L/1000µm Slightly damaged V-Axis covers (will be replaced or delivered without) Software MCOSMOS-1 V3.5, Windows 10 PC or selectable upgrade to: - Mitutoyo MCOSMOS 4.2 incl Geopak & MCAT1000S or new license - EasyCMM I++ Server plus Inca Professional Probe Renishaw PH10T with either: - Renishaw Touch probe TP200 - Renishaw Touch Probe TP20 Isdpfef S Tmvjx Ah Uoik Selectable options: - Scanning Probe Renishaw SP25 with PH10M - Probe Change Racks - New PH10M+ Head and Probe (upgrade) - MCOSMOS Offline license MCAT1000P - Bilz Pneumatic Vibration Damping System on demand Installation & Calibration (plus additional travel expenses) Including 3 Month Warranty (excl. travel expenses)

Condition: excellent (used), Stäubli Type: Robot TX90L / Controller CS8C Six-axis robot with controller The high-performance robots in the TX90 series for medium payloads offer the highest possible flexibility for many applications thanks to their compact, slim design. Thanks to the three mounting options - floor, wall and ceiling - the six-axis robots are easy to integrate. The completely encapsulated structure (IP 65) enables use in clean rooms or under aggressive environmental conditions. Features Completely encapsulated structure with internal supply lines Rigid structure Iodpfovx Tbtsx Ah Ujik Multiple mounting options Patented Stäubli JCM gear modules Long range Advantages Perfect protection of the components. Standard version in clean room class ISO 5. Easy to clean. Excellent dynamic path behavior High flexibility Precision, dynamics and speed with reduced maintenance effort Optimal use of the work space Technical data TYPE TX90L Number of degrees of freedom 6 Nominal load capacity 6 kg Maximum load capacity 15 kg Range 1200 mm Repeatability ±0.035 mm Protection class (wrist) IP65 (IP67) Mounting options floor / wall / ceiling Control Stäubli CS8 CS8C Features Ethernet, fieldbus, digital inputs and outputs, serial interfaces Easy to integrate, 19-inch rack version, protection class IP20 All connections on the front Proven digital technology Advantages Open architecture Compact Good accessibility Reliable Technical data: Type CS8C Dimensions (H x W x D) 331 x 445 x 455 mm 481 x 445 x 455 mm Protection class IP20 (IP54 optional) RAM 64 MB RAM (min.) Storage capacity 128 MB (min.) Flash disk and USB port System/programming language VAL 3 (multitasking interpreter language), language PLC-IEC 61131-3 Communication Serial interface RS232/422, Ethernet, ModBus/TCP server Type: Robot TX90L / Controller CS8C Condition: used Scope of delivery: (See image) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Year of manufacture: 2011 Range: 1000 mm Iodpfewcd R Sex Ah Ujik Control: CS8C Load capacity: 6 kg Repeatability: ±0.03 mm Robot weight: 111 kg Axes: 6

Condition: new, The KSM 13 Tool Grinder from KNUTH is a compact and efficient solution for precise and cost-effective grinding of double-edged twist drill bits within the Tool Grinders category. This handy device offers simple operation, allowing users, even without prior knowledge, to achieve clean and precise results quickly. The KSM 13 features a motor rating of 0.12 kW and accommodates grinding diameters from 3 to 13 mm, making it versatile for various drilling needs. With included grinding wheels and common collets, it simplifies the process of chamfering the relief angle and point angle while ensuring optimal chip removal during the grinding path. This robust tool is an ideal addition to any tool crib, enhancing your grinding capabilities. Don't miss out on improving your tool maintenance; request a quote or buy now to obtain this indispensable tool grinder. Isdpfxsnh Nu Us Ah Ueik

Condition: used, Year of construction: 2009, operating hours: 50,000 h, functionality: fully functional, load capacity: 12 kg, type of input current: three-phase, Equipment: documentation/manual, We offer a Stäubli TX90 or TX90L robot with CS8C control. The robot is level C after robot maintenance by Stäubli service. Iijdpfx Ajurvufjh Usk The TX90 robot has a reach of 900 mm. The TX90L robot has a reach of 1200 mm. We supply the robot with a connecting cable between the robotic arm and the control unit. It is also possible to order the SP1 control panel and other accessories. .