TMCI PADOVAN 4x 200hl Fermentation and storage cellar (1992)

TMCI PADOVAN Gär- und Lagerkeller

Condition: used, Year of construction: 1994, Overview These 2 isobaric pressure tanks (150 hl each) manufactured by TMCI Padovan in 1994 originate from the wine industry and were previously used for sparkling wine production. Designed with a full cooling jacket and pressure resistance up to 6 bar, the tanks are suitable for fermentation, maturation, and storage of carbonated products, including beer, sparkling wine, and similar beverages. The tanks are constructed from carbon steel with an internal food-grade epoxy coating, representing a widely used technology before stainless steel tanks became the industry standard. They offer a cost-efficient alternative to stainless steel vessels, especially for operations with lower investment requirements. Each tank is fully insulated and equipped with a complete cooling jacket, allowing temperature-controlled processing. As with all epoxy-coated vessels, periodic renewal of the internal coating is required depending on usage and product conditions. TECHNICAL DATA - Manufacturer: TMCI Padovan - Year of Manufacture: 1994 - Quantity: 2 units - Type: Isobaric pressure tank with full cooling jacket - Application: Fermentation, maturation, storage of carbonated beverages - Capacity: 150 hl per tank - Material: Base: Carbon steel Internal coating: Food-grade epoxy resin Insulation: Approx. 100 mm polyurethane with stainless steel cladding Fsdpjy Hknxsfx Anzegf - Pressure Rating: 6 bar - Dimensions (per tank): Outer Diameter: approx. 2,400 mm Cylinder Height: approx. 4,000 mm

Condition: used, Year of construction: 1991, consisting of: -SIGMATHERM plate heat exchanger (heat exchange surface 21.5 m2) - Forerun tank 1200 l - Hilge product pump with manual control valve - Hilge hot water circulation pump - 500 l expansion tank - Shell-and-tube heat exchanger - Compressed air reduction station -Control cabinet with operating panel Additional title: juice heating plant for pasteurization Capacity: 100 hl/h Perm. working overpressure: 16 bar test pressure 20,8 bar Wärmeaustauschfläche: 21 m2 Length: 5,6 m Width: 2 m Fedpovcqy Uofx Anzjgf Height: 2,4 m Operation / Control: Control cabinet with operating buttons Material: Stainless steel Base construction: Frame Features: 2 x vessels; plate heat exchanger; pipe heat exchanger; 2 x product pumps; process measuring and control technology. various valves and other fittings

Condition: used, Year of construction: 1985, Overview These 5 insulated pressure tanks (100 hl each) manufactured by TMCI Padovan in 1985 originate from the wine industry and were previously used for sparkling wine production. Due to their pressure rating and full cooling jacket design, they are suitable for fermentation, maturation, and storage of carbonated products. The tanks are constructed from carbon steel with an internal food-grade epoxy coating, a technology widely used in the industry before stainless steel became standard. While not as common today as stainless steel vessels, these tanks offer a cost-effective alternative, particularly for producers with lower investment budgets. Each tank is fully insulated and equipped with a complete cooling jacket, enabling controlled temperature processes. It should be noted that the epoxy coating requires periodic renewal, depending on usage and product type. Fedpfsy Hkkyjx Anzjgf Technical Data - Manufacturer: TMCI Padovan - Year of Manufacture: 1985 - Quantity: 5 units - Type: Pressure tank with full cooling jacket - Application: Fermentation, maturation, storage of carbonated beverages - Capacity: 100 hl per tank - Material:Base: Carbon steel Internal coating: Food-grade epoxy resin Insulation: Approx. 100 mm polyurethane with stainless steel cladding - Pressure Rating: 6 bar - Dimensions (per tank):Outer Diameter: approx. 2,200 mm Cylinder Height: approx. 4,000 mm

Year of construction: 1988, condition: used, Cylindro-conical 965 hl fermentation and storage tank. - coolable, 1 x cone cooling jacket, 3 x side wall cooling jacket - swivel cone - stainless steel - insulated - short supporting skirt - deaeration and cleaning combination with safety valve - vacuum valve 12 tanks, also available individually or in partial quantities. Fodpfx Aevcqnlenzogf Additional title: Outdoor tanks for storing fluids; years of manufacture 1988-1991 Capacity: 96450 l Operating pressure: 2 bar Length: approx. 12400 mm Width: approx. 3950 mm Height: approx. 3950 mm Weight: 6220 kg Material: Stainless steel 1.4301 Position: vertical Base construction: short supporting skirt Features: 12 tanks; Cooling: 1 x cone cooling jacket, 3 x side wall cooling jacket; swivel cone; insulation; dearation and cleaning combination; safety valve; vacuum valve; temperature measurement

Condition: excellent (used), functionality: fully functional, tank capacity: 68,000 l, usable tank capacity: 65,000 l, total height: 9,865 mm, inner diameter: 3,400 mm, outer diameter: 3,800 mm, overall weight: 4,200 kg, negative pressure: 0.02 Pa, overpressure (max.): 2 bar, 20 x 68 m³ ZKG Tank / Beer Pressure Tank / Fermentation and Storage Tank Technical Data / Dimensions Available units: 20 Total volume: approx. 58,000 liters Tank type: Pressure tank Condition: Used Suitable for food: Yes Design: Suspended Internal diameter: approx. 3,400 mm External diameter: approx. 3,800 mm Cylindrical height: approx. 6,000 mm Total height: approx. 9,865 mm Weight (empty): approx. 4,500 kg Specific weight of medium: 1.0 t/m³ Operating pressure: Overpressure Operating pressure: 2 bar Test pressure: 2.86 bar Wall thickness, cone: approx. 4–5 mm Wall thickness, top head: approx. 6 mm Wall thickness, shell/cylinder: approx. 3.5–4 mm Operating temperature: -10°C / +50°C Material: Inner shell material: V2A (1.4301) Internal surface: Ground and pickled Heating / Cooling System Cooling medium: Glycol Operating pressure: 2.0 bar Operating temperature: -3°C Heating / cooling system material: V2A (1.4301) 2 x shell cooling zones (approx. 11 m² each) with approx. 100 liters capacity each 1 x cone cooling zone (approx. 4 m²) with approx. 70 liters capacity Insulation Insulation thickness: approx. 150 mm Insulating material: PU foam / mineral wool Cone cladding: Stainless steel (1.4301) Shell cladding: Aluminum trapezoidal sheeting Equipment Mounting type: Hanging lugs Number: 4 Attachment: Fixed Top base type: Basket dome Bottom base type: Cone Top head: 1 x manway DN 500 with insulation hood 1 x roof edge railing 1 x valve dome with the following fittings/connections: 1 x vacuum valve (DN 40) 1 x safety valve (DN 40) Fgjdpfsyhzq Aex Anzsf 1 x cleaning fitting with spray head DN 32 (removable) Shell: 2 x connections for temperature measurement with insulation box 1 x cable protection tube DN 50 1 x dome drain pipe DN 15 1 x cleaning line DN 50/40 3 x cooling supply (DN 25 / R1") 3 x cooling return (DN 25 / R1") Bottom/cone: 1 x sampling valve DN 10 1 x swiveling cone NW 450 1 x cone with threaded connection DN 65 terminating Documentation: Drawing Inspection book TÜV certificate The tanks originate from various years of manufacture (1990–2004) and may differ slightly in equipment and design.

Year of construction: 1987, condition: good (used), - Year of construction: 1987 - Horizontal sieves - 30 filter plates - Filter area : 6 m2 - Max, operating pressure : 6 bar - Capacity : 30 - 120 hl/h - With semi-automatic cleaning - Dosing pump replaced in 2017 - Machine in good condition Dimensions : - Length : 1800 mm - Width : 850 mm Fedpfxjt Igd Nj Anzogf - Height : 2000 mm

Condition: used, Year of construction: 2002, Cylindroconical fermentation and storage tanks with 3 frame cooling zones and cone cooling. The tanks are insulated and clad. Individual sale possible. Additional title: vertical, coolable stainless steel tanks Fedpoxbn Eujfx Anzjgf Gross volume: 58890 l Max. overpressure: 2 bar Operating temperature: -10 to 50 °C Total cooling area: 13,3 m2 Length: 3370 mm Width: 3370 mm Height: 11000 mm Material: stainless steel Position: vertical Features: insulation, cladding, cooling jackets (3x frame, 1x cone)

Condition: good (used), A-1654-Padovan- Brine filter Padovan Green Brine filter Fjdpsh A Hckefx Anzogf Please contact us for more information.

Condition: used, Year of construction: 2002, Used Fossil Flour Filter Della Toffola NF5 year 2002 Detailed Technical Specifications This Filter provides advanced filtration capabilities, designed specifically for the bottling industry. This NF5 model, manufactured in 2002, functions as a fossil flour filter for industrial liquid processing, offering high precision and durability. As a result, it handles impurities and microscopic particles effectively, making it ideal for applications requiring high standards of purity. Model Specifications and Operating Conditions Fodpfx Aovgvfdjnzjgf The Filter Della Toffola operates as a high-performance fossil flour filter. Its robust structure supports continuous operation under extreme conditions, with an operating temperature range from -10°C to +50°C. Additionally, this filter maintains a maximum operating pressure of 7 bar, delivering safe and effective filtration even in high-pressure environments. Electrical Characteristics and Performance The Used Fossil Flour Filter Della Toffola NF5 year 2002 operates at a nominal voltage of 400 volts, using a three-phase system that, consequently, ensures uniform power distribution. Notably, the maximum load current reaches 6.70 amperes, while its standard operating current is 15 amperes, confirming its ability to handle prolonged cycles without overloads. Furthermore, the device runs with 6.50 kW of installed power, enabling efficient performance even under heavy workloads. Dimensions and Weight This fossil flour filter measures 2200 mm in length, 1400 mm in width, and 1800 mm in height. Because of its weight of 470 kg, it requires adequate structural support for safe installation and movement. Therefore, operators should consider its specific footprint and weight when setting up the workspace to ensure compatibility and safety. Functionality and Safety This equipment includes essential safety devices, which are critical for minimizing risks in industrial environments. Consequently, these integrated safety systems protect both operators and equipment from potential malfunctions or suboptimal conditions. Additionally, the filter currently remains in storage condition, fully prepared for reuse with all original functionalities intact. Manuals and Documentation This machine includes detailed user and maintenance manuals that, in turn, guide proper handling of the machine. The technical documentation outlines precise procedures for installation, cleaning, and preventive maintenance, which not only improve operational efficiency but also extend the device’s lifespan. In conclusion, the Used Fossil Flour Filter Della Toffola NF5 year 2002 offers reliable filtration solutions for processes requiring precision and robustness. Its capabilities make it especially suitable for the bottling industry, where it performs optimally even in extreme conditions. Furthermore, it incorporates advanced safety features, making it an ideal choice for those who need durable and effective industrial filtration equipment.

Year of construction: 1982, condition: used, Cylindroconical 580 hl fermentation and storage tank - glycol cooling, 4 cooling zones (1 x cone, 3 x cylinder) - swivel cone - stainless steel - insulated - support skirt Additional title: Outdoor tanks Capacity: 580 hl Operating pressure: 2 bar Operating temperature: 20 °C Cooling area: 29 m2 1 x cone cooling; 3 x side-wall cooling Material: stainless steel Fsdpfevcq A Aex Anzegf Position: vertical Base construction: Short skirt support Features: Tank cooling; swivel conus; insulation; frame; outlet DN100; CIP connection; 2 x temperature sensor; sample valve