Four-jaw chuck

unbekannt -

Condition: used, sheet width - max. 170 mm plate thickness 3,4 mm angle steel/side length 50 mm weight of the machine ca. 70 kg dimensions of the machine ca. 0,7 x 0,16 x 2,1 m Godov Dxzijpfx Aadjin Is cutting flat steel, L-beam, Scorper, round and square material. Machine dealer with own stock of 1600 m².

Condition: new, GRATMAXX Bürstentgratmaschine The machine is suitable for the deburring of edges on: Round tubes, square tube, rectangular tube, full materials, profiles of all kinds. Materials: Steel non-ferrous metals, plastics, hard or soft. Work flow: After setting the workpiece support and dern side stops the Ridge-workpiece is easily kept on the brush rotating around its own axis, without rotating the workpiece, this movement is also the brush. The workpiece material, the Ridge strength, as well as the desired rounding of the edges determine the pressure and the duration of contact seconds, usually around 1-5. Gisdsd Hmnfspfx Aaden Technical data: Material: Steel, stainless steel and non-ferrous metals (engine speeds 700-1,900 rpm, infinitely variable) Min. workpiece-Ø: 5 mm Maximum work piece-Ø: 100 mm (150 mm) Brush dimensions: 2 piece Ø300 (250) x 50 or 3 piece Ø 300 (250) x 35 Power: 3,0 KW Power: 3.5 KW Operating voltage: 3 ~, 400Volt, 50 Hz Rated current: 8A Back-up fuse: max 16A Control voltage: 24V/DC Width: approx. 500 mm + Handwheel 74 mm, + dust spout 130 mm Altitude: 1.382 mm Working height: approx. 1.080 mm Depth: 1,209 mm Weight: 310 kg Sound pressure level: At speed 700 rpm 64 dB(A) at a speed 1500 rpm 74 dB(A), when machining a workpiece with maximum speed of 82 dB(A) Scope of delivery: Rotary head Bürstentgratmaschine GratMaxx with power socket without cable Workpiece support table with adjustable angle stop and

Condition: ready for operation (used), table length 800 mm table width 320 mm Gedoumndbjpfx Aadein groove width 20 mm dimensions of the machine ca. 800 x 320 x 250 mm Fixed angle table for attachment to tool milling machine with water drainage. Machine dealer with own stock of 1600 m².

Condition: used, plate thickness 4 mm Cutting thickness max. At (60 kg / mm²) 3 mm blade length 90 mm weight ca. 30 kg dimensions of the machine ca. 0,45 x 0,30 x 0,2 m Notching unit for installation under a hydraulic or eccentric press. The cutting thicknesses are estimated to be low. Gjdpfx Aaeu I Et Rodein Machine dealer with own stock of 1600 m².

Condition: new, 4-jaw Chuck unused Diameter 400 mm Recording KK 8 (140 mm) Opening 125 mm JAWS Height 140 mm Weight 62 kg Gsdpfsd Idnwox Aadjin

Condition: used, Technical details: voltage: 220 V / Hz revolution per minute: nicht bekannt U/min weight: 59 kg dimensions L x W x H: ca. 0,38 x 0,44 x 1,2 m Gijdpfsu Ngx Dsx Aaden Double sanding bench, mounted table unit currently clamped sanding discs: right Ø 180 x 6mm and left Ø 120 x 25mm with sanding supports, right and left, adjustable by 50mm Grinding guard on both sides Grinding block mounted on stand, foot mounting possible *

Condition: used, Jaw width: 155 mm Gsdpfx Asc R Slqoadsin jaw height: 55 mm Clamping length (without special jaws): 170 mm Vertical swivel angle: + 90/- 15°. Height horizontal: 200 mm Required space: 650 x 380 mm

Condition: used, Chuck outer Ø: 350 mm Bore: 125 mm Height: 100 mm Gedpfx Ajdaqcfeadoin incl. outward stepped jaws, chuck key, inward stepped jaws are missing!

Condition: used, Jaw width: 130 mm Jaw height: 43 mm Clamping length: 100 mm Overall height: 175 mm Gedob Eg Rhjpfx Aadoin Vertical swivel angle: + 15/- 45

Condition: used, gr. working width: 1020 mm for sheets (steel sheet) up to: 1 mm Gisdpfx Asb Hlyrjadsn space requirement: 1420 x 650 x 1160 mm Weight: 250 kg

Condition: used, Outer-Ø: 355 mm Bore: 130 mm Height without flange: 113 mm Height with flange: 150 mm Gisdpfx Aec Snucjaden

Condition: used, 3 ball bearing castors, width: 320 mm Giedpfxjctb Dgj Aadsn Height of castors above floor: 970 mm Total length: 1200 mm Roller block: Roll width: 400 mm Roller height above floor (adjustable): 970 mm

Condition: used, Load capacity approx.: 4 t Platform size: 1500 x 3000 mm Platform height: 600 mm Gsdpoc H Tmtsfx Aadsin Weight approx.: 600 kg

Condition: used, Jaw width: 150 mm jaw height: 45 mm clamping length: 130 mm overall height: 185 mm Vertical swivelling: + 20/- 45°. Gsdpfx Aasb Eg Rcedein