Clamping plate

unbekannt 1990 x 1570 mm

Condition: used, Aufspannplatte - Tisch einer Langhobelmaschine - Tischbreite/Aufspannbreite: 1845 Tischlaenge/Aufspannlaenge: 5505 mm 7 T-Nuten laengs fuer T-Nutensteine: M 30 Itjdpfxebn Amfe Ab Sog T-Nutenabstaende zueinander: 263 mm Gesamtlaenge: 6230 mm Plattenhoehe insgesamt: 350 mm Gewicht: 11 t

Condition: reconditioned (used), Year of construction: 2007, operating hours: 22,605 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,400 kg, overall weight: 36,000 kg, oil tank capacity: 1,300 l, For sale is a overhauled baler, with 100 tonnes pressing force, large format 1100 x 1100 mm, 75 kW drive power and 10-fold cross binding Technical data baler: Manufacturer Bollegraaf Typ HBC 110 K / 75 kW Year of construction 2007 Press power main press 100 tons Press power of pre-press 50 tons Operating hours 22,605 hours Feed channel 1,600 x 1,100 mm Capacity per cycle time 3,15 m³ Theoretic cycle time 19 sec. Bale size 1,100 x 1,100 mm Driving motor 75 kW Connected load 126 kW Full load current 238 A Tying system 5-fold vertical, 5-fold horizontal, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx.16 tons/h bulk weight of 50 kg/cbm approx. 25 tons/h bulk weight of 100 kg/cbm approx. 47 tons/h Bale weight up to 1400 kg, depends on material and bale lenght Volume oil tank approx. 1,300 l SPS controller Telemecanique TSX Micro Operating panel Schneider MAGELIS Touch Baler dimensions built up with hopper 11,750 x 5,000 x 7,105 mm (l x w x h) Transport dimensions only baler 11.750 x 2.500 x 3.450 mm (l x w x h) Machine weight baler approx. 36 tons Comments: The press was partially overhauled and serviced in our workshop and tested and stored after completion of the work. The machine is available at short notice and can be inspected in our warehouse by appointment. The following overhaul work was carried out: Rust removal and partial painting of the press. Remaining hydraulic oil tank drained, oil filter and air filter replaced. New hydraulic oil topped up. All hydraulic hoses replaced. Main hydraulic cylinder, two cylinders of the prepress flap and the cylinder of the press channel dismantled, disassembled, checked, cylinder tubes honed, all seal sets replaced and a final pressure test carried out. Disassembly of the prepress flap with bearings and bearing blocks. 1st and 3rd circular arc segmet cut out and a new one welded in again. Both bearings of the shaft of the prepress flap replaced. Upper material deflector on the frame of the prepress flap replaced. Press ram dismantled, checked and both front rollers replaced. Material deflectors and wear profiles on the sides and base of the press ram cut off and new ones welded in. Horizontal and vertical needle and tying unit dismantled, disassembled, checked, plastic sliding plates, bearings of the drill shafts and wire deflection rollers with bearings in the needle heads replaced. Both bronze slide rails on the left and right in the frame cover to the press ram replaced. Both wire deflection units on the left and right, with bale retaining clamps, completely renewed. Wire insertion unit including hydraulic cylinder under the needle feedthroughs completely renewed. Wire entry marks in the floor and side walls of the bale chamber welded shut and smoothed. General maintenance and service work carried out in accordance with the manufacturer's specifications. Press was tested in manual and automatic mode, accepted and stored after completion of overhaul work. We accept no liability for the technical specifications or any errors. Itodpfx Ajvf E Avsb Seg

Condition: like new (used), Year of construction: 2000, operating hours: 25,000 h, travel distance X-axis: 10,300 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,800 mm, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, position of the milling head: 2.5 x 2.5 °, spindle speed (max.): 3,000 rpm, spindle speed (min.): 60 rpm, table width: 3,300 mm, table length: 12,000 mm, mount diameter: 50 mm, total height: 48,750 mm, total width: 100,000 mm, total length: 212,000 mm, overall weight: 100,000 kg, Duplex milling are two machines located one opposite the other which can work seperately or as single machine, workpiece can be machined with 2 simultaneous spindles. Production increase of up to 50% in relation to conventional solutions, i.e. individual milling machines Improvements in part precision, by managing to do the machining of the part in one single setup, in most of the cases One sole operator can control the DUPLEX milling machines Reduced space and investment requirement comparing with two single machines Fast investment amortization due to the high productivity Duplex solution admits different configurations: single working area, pendulum working areas For machining excavator arms / boom like, CAT, Caterpillar, Komatsu, Hitachi, Hyundai, Doosan, Case, Bobcat, JCB, Kobelco, Liebherr, Kubota, Takeuchi, Volvo X-Axis: 10300mm Y-Axis: 2000mm Z-Axis: 1800mm Table Length: 12000mm Table Width: 3300mm Table load: 100000 Power on spindle: 22/30kW Spindle speeds: 60 - 3000Rpm Spindle Taper: 50ISO/Bt/Mk Feed rate X-Axis: 10000mm/min. Feed rate Y-Axis: 10000mm/min. Feed rate Z-Axis: 10000mm/min. Millinghead auto-index:2.5 x 2.5° Working hours: 25000H Iodpfx Aborx Rxte Sstg Length: 21200mm Width: 10000mm Height: 4875mm Weight: 100000kg

Condition: used, Year of construction: 2023, functionality: fully functional, travel distance X-axis: 14,000 mm, travel distance Y-axis: 4,500 mm, travel distance Z-axis: 1,900 mm, RepairFIT by Dornhöfer The Difference. Installation & Commissioning Included! Year of manufacture of the machine: 2023 Capacities / Travel distances: Longitudinal (X): 14,000 mm Vertical (Y): 4,500 mm (*5,076.5) Cross (Z): 1,900 mm * Due to the two horizontal positions of the automatically indexing milling head, the vertical machining area can be extended by 576.5 mm. Table area (2 units): Length: 6,000 mm Width: 3,000 mm Number of T-slots on the table surface: 12 Width of T-slots: 22 mm Distance between slots: 250 mm FIBRO Rotary & Sliding Table: Dimensions: 3,000 x 3,000 mm Sliding axis: 1,500 mm Max. table load: 40 t Year of manufacture: 2002 Paint finish: RAL 7021 (black-grey) RAL 7035 (light grey) ref F-38 (DanobatGroup blue) Tool holder: ISO 50, DIN 69871 AD Big Plus Pull stud: DIN 69872 Form A Main drive: Drive type: SIEMENS main spindle motor with a 2-stage oil-cooled ZF gearbox Drive power: 100% duty cycle 53 kW (S1) Spindle speed range: Iodpfxsyu Szno Ab Sjtg Spindle speed: 20–4,000 min-1 Max. torque: at S1 – 100% duty cycle 1,531 Nm Max. feed force: X, Y, Z axis: 31,000 N Max. rapid traverse speed: X, Y, Z axis: 25,000 mm/min BASIC EQUIPMENT OF THE MACHINE: Heidenhain CNC control TNC640 High-performance orthogonal milling head Automatic tool changer (80 positions) Chip conveyor with floor discharge Coolant system with 20 bar & (IKZ) DYNAMICS ACTIVE STABILIZER+ "DAS+ SYSTEM" Cross-axis compensation Automatic milling head change system Operator platform Camera for workspace monitoring Pendulum machining package ACCURA HEADS Optimized Contour Milling (OCM) RepairFIT is our proven solution for a profitable entry into our product lines. Machines available in this line are sourced through a rigorous selection process and undergo a comprehensive inspection (deep-dive check). After thorough cleaning, any obvious defects or faults found are professionally repaired by our expert service team.

Year of construction: 2004, condition: good (used), Build in 2004 Description/configuration: Complete line for automatic pallet strapping, automatic stretch-wrapping of pallets. Includes fully automated pallet conveying. Line with ""straight""-configuration, built with chain conveyors and configured as follows: > Straight chain conveyor, motorized, travel is long side leading, l~1100 mm, REF 25778.01 > pallet strapper Cyklop XZE-3111, REF 25778.30 Itjdpjhrmlkofx Ab Ssg > Straight chain conveyor, motorized, travel is long side leading, l~1100 mm, REF 25778.02 > Straight chain conveyor underneath wrapper, motorized, travel is long side leading, l~2600 mm, REF 25778.03 > ring style pallet film wrapper Cyklop GL 2000, REF 25778.40 > Straight chain conveyor, motorized, travel is long side leading, l~1100 mm, REF 25778.04 > Straight chain conveyor, motorized, travel is long side leading, l~1100 mm, REF 25778.04" Layout available max speed in pallets/h: 50 pallets/h Chain conveyor Pallet width of up to 800 mm Pallet length of up to 1200 mm max height full pallet (max passage height): ~1700 mm Height of pallet conveying (min=300mm): ~400 mm max weight full pallet: ~1500 kg Over all length equipment: ~8000 mm Over all width equipment: ~6000 mm Over all height equipment: ~3500 mm Input Power: ~15 kw (whole line) Voltage: 400 V, 3 Ph, 50 Hz Air requirement: 6 bar Equipment at central warehouse Helmstedt with nearest airports: Hannover (~1,5 hrs), Leipzig (~2hrs), Berlin (~2,5 hrs) Condition: cleaned & in working conditions Machine available: upon request

Condition: excellent (used), Motor-driven NC rotary table Stepless rotary table (pitch 0.001°) Attached pallet station: pallet changing table (2 pallets) Manufacturer: Rückle Type: PKTF 1200 Table size: 1200 mm x 1200 mm Total height: 660 mm Centring hole: 100 H6 mm Clamping grooves: 7 pieces Slot dimension: 22 H7 mm Slot distance: 160 mm The displacement is measured via a ROD 250 rotary encoder. Condition: Very good (used) Optionally with machine bed (travel = 2000 mm ) About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH, is a free specialist for SHW machine tools. Our main focus lies in the field of tool milling machines. Our services include the supply of spare parts, on-site customer service, machine overhauls and control modernization. Iodpfofk R Tdjx Ab Sotg Services: - Used machines - spare parts - after-sales service - machine service - machine overhauls - control modernization

Condition: ready for operation (used), functionality: fully functional, first registration: 06/2021, fuel type: gasoline, color: yellow, Year of construction: 2021, operating hours: 150 h, Equipment: all wheel drive, cable winch, Spider 2SGS large area mower and Itedpfx Abstv Rmfe Seg embankment mower with radio remote control incl. cable winch, bought in mid-2021, first owner, 150bh service recently new, operating instructions + all documentation included, remote control plus 2 times battery, I have only mowed with the mower in the solar park, nothing else. The mower runs great, no complaints. Just call if you have any questions

Year of construction: 1992, condition: like new (used), machine/vehicle number: Div1, Technical data: 1x Demag KBK 1 pillar slewing crane NL 125KG with chain hoist Payload at full radius 125KG / 0.125to payload Height: about 3.5m UK outrigger: approx. 3m Outreach: approx. 4m Hook height: approx. 2.55m Weight complete approx. 450 kg with steel or Demag chain hoist 125 kg depending on stock incl. bolts, drag cable, chassis, end cap etc. Various cranes are available Swivel range 300°, connection to 400V 16A Crane is dismantled and available immediately Itjdpfx Abeng H T Ue Sog Item location is 75053 Gondelsheim There are other cranes available, load capacity 80-5000 kg, please inquire See pictures Dispatch by forwarding agent or pick-up only by appointment

Condition: used, Year of construction: 1982, Technical details: faceplate diameter: 2600 mm turning diameter over support: 2500 mm turning length: 450 mm centre distance: 1600 mm turning diameter over bed: 2900 mm spindle bore: 100 mm revolution per minute: gear steps U/min feed range: Überdrehen 0,12-31,5 Plandrehen 0,12-45 mm/min bed guideways length: 2900 mm max. workpiece weight between centres: 400.000 kgs total power requirement: 45 kW weight of the machine ca.: alle Komponenten zusammen: ca. 29,0 t machine dimensions LxWxH: 5.2 x 5,0 x 3,1 m 3-way measuring system with digital display RSF electronics Control panel Cooling unit for Rittal electric cabinet * Itodpfswtctysx Ab Sog

Year of construction: 2015, condition: refurbished (used), DCB Half gantry crane consisting of: 2 pcs 16 ton hoists. 2 support legs. The following accessories are included: 1 remote control with charger. 2 pcs weight display. Max hoist height: 12,4 meters. Lifting speed: 0.11-5.6. Classification: M5. Range: 21,792. Dimension crane guide rail: 80x60. Functional. In operation until week 12 2021. Dismantled week 12 2021. All annual inspections complied. The following accessories are included: crane folder with original documents, service reports, overview of ongoing maintenance. The following accessories are not included: Running rails + power rails. Master data Model and type 2x16 T MAX 22 T Chassis No. Unknown Year Estimated 2015 Max load KG 2x16 T MAX 22 T Weight KG 20,640 excl. legs. Transport can be arranged. Isdpfxshk I H De Ab Sjtg Call or write to make an appointment for viewing. Client sale, Location: DK-7600 Struer.