Clamping plate milling support

unbekannt 370/140/H53 mm

Condition: used, Year of construction: 1998, x-travel 6000 mm y-travel 4000 mm z-travel 1250 mm w-axis 1500 mm Control Fidia max. workpiece weight 60000 kg Control unit for tool magazine/tool changer Siemens turning speeds 6,3 - 4000 U/min surface area 2500 x 4500 mm 48 St. tool taper SK50 daylight between the side columns 3700 mm Phsdou I E Emepfx Ah Uja rapid traverse 30000 m/min total power requirement 63 kW weight of the machine ca. 150 t required space 16,8 x 10,3 x 7,9 m

Condition: excellent (used), Year of construction: 2012, travel distance X-axis: 8,000 mm, travel distance Y-axis: 3,100 mm, travel distance Z-axis: 1,600 mm, feed rate X-axis: 25,000 m/min, feed rate Y-axis: 25,000 m/min, feed rate Z-axis: 25,000 m/min, spindle speed (max.): 4,000 rpm, table length: 8,000 mm, table width: 2,500 mm, table load: 15,000 kg, Chain ATC Tool changer 80 positions Rotary table 1500 x 1500 with V-Axis 1500 mm Table load 15.000 Kg Pedsxm Sudspfx Ah Ujha Optional Box table 3500 x 1000 x 1000 mm Under power X-Axis: 8000mm Y-Axis: 3100mm Z-Axis: 1600mm Table Length: 8000mm Table Width: 2500mm Table load: 15000 Power on spindle: 43kW Spindle speeds: 4000Rpm Spindle Taper: 50ISO/Bt/Mk Feed rate X-Axis: 25000mm/min. Feed rate Y-Axis: 25000mm/min. Feed rate Z-Axis: 25000mm/min. Control: iTNC530 Millinghead auto-index:2.5 x 2.5° Length: 14000mm Width: 6000mm Height: 6000mm Weight: 68000kg

Condition: used, turning diameter over bed 2400 mm turning diameter over slide rest 2200 mm turning length 10000 mm power capacity 185 kW faceplate diameter 1650 mm turning speeds 1,5 -150 U/min max. workpiece weight 70000 kg clamping diameter 1400 mm Technical data Working range Maximum turning diameter over support: 2200 mm Maximum swing diameter over bed: 2400 mm Maximum turning length: 10,000 mm Clamping diameter in the headstock faceplate: 300 - 1,600 mm with special jaws up to 2,050 mm Clamping diameter in the tailstock faceplate: 300 - 1,400 mm Maximum workpiece weight: 70000 kg Main drive, faceplate Faceplate diameter: 2000 mm Faceplate speeds, continuously adjustable in 4 stages: 1.5 - 150 rpm Maximum torque at rated speed: 220,000 Nm Drive power of main motor: 185 kW Flange centre point angle: 70° Supports Travel of the plunge slide: 500 mm Travel of the face slide: 1400 mm Quick adjustment, longitudinal: 2000 mm/min Quick adjustment, face: 800 mm/min Infinitely variable feed, longitudinal: 0.6 - 300 mm/min Infinitely variable feed, face: 0.3 - 120 mm/min Max. cutting force at support: 20,000 kg Tailstock Faceplate diameter (removable): 1650 mm Faceplate clamping diameter: 1400 mm Flange centre point angle: 70° Quick adjustment: 1250 mm/min Special equipment Copying device for first support Podpjxddvnofx Ah Ujha Copying length 8500 mm Max. copying depth in one pass 500 mm Boring device: Boring bar 460 x 390 mm Drilling diameter 600 - 1000 mm Maximum drilling depth in one pass 2700 mm At Ks of 200 kp/mm² - s max. = 1.5 mm/rev a = max. chip cross-section 30 mm² at a projection of 1000 mm Reduced chip cross-section with increasing drilling depth A guide ruler for cone turning, adjustment angle up to 8° and a maximum cone length (in one pass) of 2000 mm, adjustment accuracy ± 5 minutes. A guide ruler for cone turning, adjustment angle up to 15° and a maximum cone length (in one pass) of 1000 mm, adjustment accuracy ± 5 minutes. 125 kg auxiliary crane on spindle box.

Condition: used, mileage: 205,880 km, power: 265 kW (360.30 HP), first registration: 05/2008, fuel type: diesel, overall weight: 32,000 kg, axle configuration: 8x4, gearing type: mechanical, emission class: euro4, Year of construction: 2008, LEAF LEAF SUSPENSION Manual transmission Podpfxok Sfv Nj Ah Usha 8x4 Technically in order

Condition: good (used), Year of construction: 2009, Manufacturer: BAILEIGH Type: R-H 120 Control: Telemechanique Year of manufacture: 2009 Arm adjustable 330 mm Phsdpfx Aowpkwfeh Usa Hydraulic side support Set of universal rolls Set of pipe rolls 88.9 mm Set of pipe rolls 60.3 mm Digital readout system position side rolls Horizontal & vertical operation possible Specifications Metric US Standard Horizontal and Vertical Horizontal & Vertical Axis Ø 100 mm Number of rolls 3 Horizontal Yes Vertical Yes Flat capacity 100 x 240 x 1600 mm Pipe capacity 139 x 4 x 3000 Ø x mm T-profile capacity 100 x 100 x 1000 mm Working speed 0 - 5500 mm/min. Adjustable side roller range 200 Upper roller pressing force 200 Bar Side support yes, 330 mm stroke Dimensions (approximate) Length 1800 mm Width 1600 mm Height 2000 mm Weight 2300 kg Please note: The information on this page has been obtained to the best of our knowledge and, where possible, from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual conditions. We recommend that you verify all important details. Share on

Condition: used, functionality: fully functional, Year of construction: 2013, Sahinler HPK 200 Hydaulic section and pipe bending machine Mil and Shaft Diameter: 200mm Tool and Roll Diameter: 900mm Working Speed: 2-5 m/min Motor Power: 30 kW Bending capacity x15x4 273x5.6 / 10000 mm Diameter biggest roll 9"x6,3 / 4000 mm Diameter top roll 650 mm Diameter upper roll 650 mm Roll capacity section - 3 200x200x18 / 5000 Shaft diameter 200 mm Phsdpsw D Uqxofx Ah Usa Top roll x15 with prebending min.120x120 / 3000 mm Voltage 3x400 V Working speed 2-5 m/min Power Power max. 30000 W Height 2300 mm Length 2400 mm Width 3400 mm Weight15000 kg

Condition: used, Year of construction: 2018, Liebherr R 924 SLC Litronic Year of manufacture: 2018 Phjdpfx Ahjw Rcrvo Usa Operating hours: 5,400 Liebherr engine – Tier 4 – EPA Adjustable boom 4.00 m Stick 2.70 m Counterweight 4.8 t SLC undercarriage, track width 2,250 mm B60 tracks, 750 mm triple grouser pads, 50 links Automatic air conditioning Central lubrication system (automatic) Premium driver's seat Comfort radio Raised hand supports for joysticks Footrest Sun visor Impact-resistant roof window Roof window wiper Cab work lights, front, LED 2,100 lumens, 2 units Cab work lights, rear, LED 2,100 lumens, 2 units Bypass filter, Liebherr Fuel tank filling pump Reversing camera Camera for monitoring right side view Return line filter for hydraulic breaker Additional handrail for accessing the right upper side of the uppercarriage Access Travel alarm system button on right joystick (switchable) Proportional control, medium-pressure circuit (left) / high-pressure circuit (right) Control switch for operating high-pressure circuit via proportional control or joystick (switchable) High-pressure circuit switchable via pedal or mini-joystick High-pressure circuit with tool control Overload warning system Two-piece boom 4.00 m Stick 2.70 m Load-holding valve for lifting cylinder Load-holding valves for boom cylinders Load-holding valves for stick cylinder Adjustable rod guard for boom cylinder Work light on boom, right, LED 2,100 lumens, 1 unit Additional work light on boom, left, LED 2,100 lumens, 1 unit Work light guards on boom, right and left Central lubrication system extended for connecting link Stick protection Hydraulic quick coupler SWA 48 HD with Likufix

Condition: good (used), Year of construction: 2000, Heavy-duty lathe ERNAULT SOMUA P72 with 3 guideways diameter over bed 2200mm diameter over carriage 2000mm speed 1.5 to 3000rpm - 75 HP machine weight 39t admitted weight 16t Phodpfsxq D Tyox Ah Usa machine visible in operation

Condition: excellent (used), Year of construction: 2006, travel distance X-axis: 8,000 mm, travel distance Y-axis: 3,300 mm, travel distance Z-axis: 1,500 mm, Manufacturer: SORALUCE Type: FS 8000 Control: HeidenHain iTNC 530 Year of manufacture: 2006 Psdjxc Emxopfx Ah Uoha ATC Chain 40 positions Max. tool size Ø 125 x 400 mm Machine prepared for rotary table Chip conveyor Central lubrication Stroke with vertical head rotated 3300 mm Specifications Metric US Standard X-Axis 8000 mm Y-Axis 2800 mm Z-Axis 1500 mm Spindle power 30 kW Spindle speed 5000 Rpm Tool holder 50 ISO/Bt/Mk X - Axis feed 15000 mm/min. Y - Axis feed 15000 mm/min. Z - Axis feed 15000 mm/min. Milling head auto-index 2.5 x 2.5 ° Dimensions (approximate) Length 17500 mm Width 4050 mm Height 5020 mm Weight 38400 kg Please note: The information on this page was provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representation or contractual terms. We recommend that you check all important details.

Condition: used, Year of construction: 1998, turning diameter max. 250 mm turning length max. 900 mm control FANUC SERIE 0-T turning spindle Durchlass 75mm chuck diameter 250 mm Podpfx Aheucgxue Uoha turning speeds 0-3700 U/min transmission ratio 2 tool numbers 12 feed speeds X/Z 15/20 mm/min quill stroke 100 mm diameter of quill 110 mm tool adaptor MK 4 coolant tank 130 l weight - pallet system 5500 kg