Four-back feed

unbekannt Durchmesser 250 mm

Condition: used, Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 250 mm -Rezess: Ø 194 mm Iaodpfx Asduab Nspnot -Hole circle: 3 x 214 mm -Throughout: Ø 70 mm -Weight: 17 kg

Condition: used, Column Drilling Machine Make: IBARMIA Model: A-35 Year of manufacture: 1980 – workshop-tested Machine No.: 1294-C Speed: See technical data Accessories: - Automatic feed for drilling - Machine lamp - Machined coolant base plate - Coolant system - Operating manual Technical Data: 9 spindle speeds via gear stages 73/103/149/232/325/472/695/976 and 1415 rpm Right/left rotation 4 automatic drilling feeds: 0.1/0.2/0.4 and 0.4 mm Drilling capacity in steel (ST 60): 35 mm Drilling capacity in cast iron (GG 20): 45 mm Iedpfx Apew Hxbmjneat Thread cutting capacity in steel (ST 60): M 27 Thread cutting capacity in cast iron (GG 20): M 33 Spindle taper MK 4 Spindle stroke: 200 mm Table dimensions: 510 x 510 mm (T-slot: 16 mm) Rotatable table plate Weight approx. 490 kg Used, sold without warranty.

Condition: good (used), Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 250 mm -hard: interchangeable jaws Iedpfx Apjduacnjnjat -Bayonet short cone flange: cone size 6, cone Ø 106 mm, bolt circle Ø 133.4 mm -Throughout: Ø 70 mm -Weight: 28 kg

Condition: used, Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 250 mm -Short taper mount: Ø 105 mm Iasdpfx Apedrwl Ijnjt -Passage: Ø 76 mm -Weight: 26 kg

Condition: used, Year of construction: 1962, frequency 50 Hz Iaodjrxg S Topfx Apnet voltage 380 V 220 V connected load 2,6 kVA rated current 6,1 A weight of the machine ca. 1 t

Condition: used, Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 250 mm Iodpfjdz U Suex Apnoat -Transmission: n/a -Weight: 25 kg

Condition: used, Flange mounting, driving flange -Chuck flange with: driving pin -Outer diameter: 250 mm -Short taper mount for: bayonet disc mounting DIN 55027 -Cone size: 8 -Hole circle: Ø 171.4 mm -Weight: 17 kg Isdpfx Apod Hcq Roneat

Condition: excellent (used), Year of construction: 2016, CMZ TA 20 TY-400 2016: YEAR: 2016 CNC: Fanuc 32i MAIN FEATURES: Swing over bed: 760 mm Swing over carriage: 600 mm Maximum turning diameter: 460 mm Maximum turning length: 473 mm Chuck: SMW Autoblok BHD 250 Bar capacity: 66 mm X axis travel: 310 mm Z axis travel: 400 mm Y axis travel: +70 / –50 mm Rapid traverse X / Z / B: 30 m/min Rapid traverse Y: 15 m/min Spindle speed: 4,000 rpm Power: 22 / 15 kW at 366 / 286 Nm Spindle nose: ASA 6 A2 Spindle bore: 73 mm Turret: 12 stations, all driven Max. speed: 12,000 rpm Power: 11.3 / 8.1 kW Max. torque: 75 Nm Tailstock travel: 400 mm Machine dimensions: 2,542 x 1,760 x 2,120 mm Weight: 7,500 kg EQUIPMENT: Chuck SMW Autoblok BHD 250 Tool presetter Iaedpfjyzduzex Apnet Servo motor for tailstock Tool holder set including 2 driven holders Chip conveyor MACHINE CONDITION: Machine in very good condition. 100% operational. Can be inspected under power.

Condition: good (used), Three-jaw chuck, three-jaw lathe chuck -Mouth size: Ø 250 mm -Recess: Ø 200 mm -Bolt circle: 3 x 226 mm -Passage: Ø 76 mm Iodpfx Apsduacysnsat -Weight: 25 kg

Condition: used, Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 250 mm -Passage: Ø 82 mm -Short taper: 8 Iajdpfxjd Ira Nj Apnet -Weight: 24.2 kg

Condition: ready for operation (used), Year of construction: 2007, spindle speed (max.): 4,000 rpm, spindle motor power: 18,000 W, overall weight: 5,800 kg, controller manufacturer: FANUC, number of axes: 5, This 5-axis MORI SEIKI NL 2500 SY was manufactured in 2007, featuring a sub-spindle and a 12-station motorized turret. It includes main and sub-chucks of 250 mm and 210 mm, respectively, and a bar capacity of 80 mm. The machine offers a spindle speed of 4,000 rpm and a tool speed of 6,000 rpm. Consider the opportunity to buy this MORI SEIKI NL 2500 SY horizontal machine centre. Contact us for more information about this machine. Additional equipment • Renishaw tool measurement arms (2) Iaedpfxjyaiqks Apnjt • Communication: USB, PCMCIA, RS-232 • Bar feeder interface • Automatic parts catcher • Independent chuck pedals • Chip extractor: hinged lateral Machine Benefits Technical Machine Benefits • Sub-spindle motor: 15 kw • Tool motor: 5. 5 kw (torque 640 nm) • Tool speed: 6000 rpm • Turret index: 0. 2 sec • 12-station motorized turret • Oil cooler: daikin • C-axis: both spindles Extra Information Machine still under power

Condition: used, Three-jaw chuck, three-jaw lathe chuck - Chuck size: Ø 250 mm Iaedjd Ira Uepfx Apnot - Passage: Ø 80 mm -Short taper: 6 -Remark: without further jaws -Weight: 26.1 kg

Condition: good (used), Wedge bar chuck, three-jaw chuck, three-jaw lathe chuck, power chuck, hydraulic chuck -Mouth size: Ø 250 mm -Cone: Ø 94 mm -Thread: M20 Iodpfsd Itcnsx Apnoat -Gradient: 2.5 mm -Weight: 33.3 kg

Condition: good (used), Offer 24132 + 24133 Technical data approx: - 2 pieces T - groove plates total approx. 4970 x 3880 mm - Clamping plates - length approx. 4970 mm each Iodetiybxopfx Apnsat - Clamping plates - width approx. 1940 mm each - Top panel thickness approx. 90 mm - Panel thickness with ribbing 200 mm - 4 T - longitudinal grooves L 4970 mm each - Distance from outer edge to center of T-slot 110 mm - Distance between the T-slots 550 mm - T-slots for T-nuts M 24 - Lateral holes to connect the two panels together - Weight per panel approx. 6000 kg - Total weight approx. 12 T.

Condition: used, Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 250 mm -Adapter plate with thread mount: Ø 67 mm -Passage: Ø 51 mm -Weight: 27 kg Iaodpfx Asdt T I Dopnot