Miscellenaeous

Viprotech Vipromat-S semiautomatic screen printing machines

Condition: used, Year of construction: 1996, The Vipromat-S semiautomatic screen printing machines, manufactured by Viprotech in 1996, are currently in production and located in Germany. These machines have a format of 700 x 1000 mm and can handle a maximum sheet size of 885 x 1250 mm with a maximum stock thickness of 25 mm. The maximum printing size is 700 x 1000 mm, and the maximum frame size is 1125 x 1500 mm. The machines have an air consumption of 6 bar at 20 nl/min and an adjustable squeegee angle between 75 and 90 degrees. The off-contact is variable from 3 to 28 mm, and the fine registration adjustment ranges from to . The squeegee speed can be set between 0.2 and 1.2 meters per second, allowing for a maximum of 850 prints per hour. The machine dimensions are 170 cm in length and 160 cm in width, with a weight of 435 kg. The electrical connection required is 230 V, 50 Hz, 1ph+N+Pe, 3 kW. The delivery terms are FCA (Free Carrier), meaning the seller delivers the goods to the carrier appointed by the buyer at the seller's premises. Format: 700 x 1000 mm Equipment: Width 160 cm Length 170 cm Maximum frame size 1125 x 1500 mm Maximum printing size 700 x 1000 mm Maximum sheet size 885 x 1250 mm Off-contact variable 3 - 28 Air consumption 6 bar, 20 nl/min Squeegee speed m/sec 0,2 - 1,2 Squeegee angle adjust 75 - 90?? Electrical connection 230 V, 50 Hz, 1ph+N+Pe, 3 kW Fine register adjustm Hodpfjvfxp Aox Addsng Max. stock thickness 25 Machine weight 435 KG Max. nr of prints/hour 850 semiautomatic screen printing machines

Condition: like new (used), Year of construction: 1995, machine/vehicle number: 110951103061440, Thieme semi-automatic 1010, built in 1995 reconditioned machine, very good condition, like new! Thieme squeegee unit Print height: max. 50 mm Print format max. 500 x 560 mm Outside frame: 1000 x 1100 mm Print table: 800 x 1000 mm 23Hgnqhag Performance: 1350 pcs./h Hnodpevrzv Ssfx Addeg Electric/compressed air: 400/230 V / 12 A, 50 Hz / 6 bar Dimensions 1.7m X 2.3m H=1.6m 1200 kg

Year of construction: 2017, condition: excellent (used), Bluhm weber legi-air 4050 labeling machine More pieces in stock! year built: 2016-19 Print resolution 8 dots/mm (203 dpi) 12 dots/mm (300 dpi) 24 dots/mm (600 dpi) Print speed Up to 400 mm per second Tamp sizes (mm) Tamp-Blow standard of 12.5 x 7 to 160 x 300 mm, label lengths must be limited in accordance with label quality, longer or smaller labels are Hnsdsfp A I Eepfx Addog possible using special tamps Label gap Minimum 3 mm Label roll 300 mm diameter, up to 450 running meters, core 76 mm (3"), outside winding (optional inside winding) Data interfaces RS232, RS422, RS485, Ethernet Optional: Profibus Dimensions (L x H x W) 770 x 560 x 580 mm, Applies to system with 250 mm stroke Display controller Multi-language operator guidance 5.7" VGA touch display Service interval indicator Polling, editing and saving of label data USB connection for memory medium or keyboard Compressed air connection 6 bar, the compressed air must be clean, dry and oil-free

Condition: good (used), Year of construction: 1989, machine/vehicle number: AN-No.: 89.04.019 A, 5 pieces Jakob Müller Frick AG NF 42 in 5x 4/42mm Hjdpfjr I Am Hox Addong with Müdata, Mütrans, without gate, super clean from Germany 2nd hand NF42 in 4/42mm from 1988-1990 AN. No.: 88.04.017 H ex.Alge, Müdata, 16 stocks very clean 7.000 Euro AN. No.: 88.04.169 D ex.Alge, Müdata, 16 stocks very clean 7.000 Euro No. 213 AN. No.: 89.04.019 B ex.Alge, Müdata, 16 shafts very clean 7.000 Euro No. 223 AN. No.: 89.04.046 B ex.Alge, Müdata, 16 shafts very clean 7.000 Euro AN. No.: 90.00.066 B ex.Alge, Müdata, 16 shafts very clean 7.000 Euro

Year of construction: 2006, condition: excellent (used), Bobst Autoplatine Speria 106 E STANDARD EQUIPMENT MACHINE - Centerline system for quick job changeover. - Electronic sheet travel monitoring system. - Adjustable centering at the stripping station. - Control cabinet air conditioning unit. - Bobst electronic control system C.U.B.E. (Control Unit Bobst Electronic). This microprocessor-based Bobst system allows the operator to easily manage, visualize, and monitor the machine’s various functions and components. - Main motor with frequency inverter control. FEEDER - Pile tray with handle for easy manual lateral alignment during production. - Synchronization device ensuring proper sheet arrival to the front lays when the machine is stopped. - Automatic pile lifting controlled by pressing foot. - Rear pile guides (operator side and opposite operator side). - Adjustable side blowers with Centerline markings. - Suction unit. Hnodpfx Asxl Taleddog FEED TABLE - Feed table with anti-static stainless steel covering. - Feed table entrance equipped with lateral ramps. - Four front lays, pairwise adjustable, with front register control. - "Pull" guide (operator side), adjustable with Centerline markings and side register control. - Double sheet detector. - Support plates at platen station entry. - Sheet hold-down mechanism (guides sheets to front lays). - Upper frame with manual lifting device. - Upper transport system for paper, paperboard, and corrugated board. - Transport belts with lateral guides and automatic tensioning system. PLATEN - Gripper reopening device. - Centering and locking for equipment. - Locking the chase to the upper beam. - Cutting force measurement with strain gauge. 1 synthetic supporting plate. 1 upper chase: fixed bottom plate. 1 cutting plate. WASTE STRIPPING STATION - Air-cylinder-driven upper frame lifting. 1 upper pull-out frame (with crossbars and clamps). 1 lower pull-out frame. DELIVERY - Pile tray. - Front jogger. - Adjustable rear and side joggers with Centerline markings. - Braking brush. - Manual non-stop rack. AVAILABLE EXTRAS B MACHINE 1 B-1 Raised machine base C FEEDER 1 C-4 Manual non-stop device E PLATEN 1 E-5 Compensating plate 1 E-55 Micro-adjustable supporting plate centering F WASTE STRIPPING STATION 1 F-31 Quick-lock device for the upper pull-out frame

Condition: excellent (used), Year of construction: 2002, ANTER 800 year 2002 – serial Nº 576/632 straightline boxes, lockbottom boxes, 4 corner boxes Max. size: 800mm; min. size: 106mm Max. length box: 650mm, min. Length box: 60mm Material: cardboard from 200gr/m2 up to 600gr/m2 Speed: Up to 350m/min. Cold glueing unit PAFRA with 2 guns Semiautomatic packer VESTAPACK year 2001, nº 507 Hsdswb Ur Ropfx Addjng

Condition: excellent (used), Year of construction: 2002, 1) Bobst Dynaload prefeeder year 1998 2) Bobst Flexo 160 year 2002 n. 5 colors, Vacuum transport, rubber roller Bobst CUBE 3) Bobst SPO 160 A Matic year 2002 Introduction of suction cup Center Line II Stripping station with motorized Quick Lock tool clamping Hnsdjv Nywvopfx Addsg Batch delivery with gripper trim extraction Bobst CUBE 4) Castaldini Breaker year 2007

Condition: ready for operation (used), Feeding depth max 1.500 mm Feeding height max 155 mm Table height 870 mm Cutting width 1.500 mm Front table length 750 mm Hsdpfx Ajd Iapyoddeng Equipment • program • air table • side table right • side table left • light barrier • 2 knives

Condition: used, Year of construction: 2001, functionality: unexamined, machine/vehicle number: RV014301, Year: 2001 Hnodpfx Adjxy E Dxsdjg Maximum sheet size: 1050 x 750 mm Minimum sheet size: 420 x 297 mm Maximum printing size: 1050 x 730 mm Sheet thickness: 0.075 - 0.8 mm Maximum feeder height: 675 mm Maximum feeder capacity: 600 kg Feeder speed: 400 - 3,000 sheets/hour Screen frame outer dimensions: 1300 x 1170 mm UV dryer Equipped with: - Stream Feeder - Pull Side Lays - Suction Feed Belt - Deep Pile Delivery - Natgraph 2-lamp UV dryer with hot air module - Trumax Hyperstack Technical specifications: Maximum mechanical speed: 1,000 - 3,000 sheets/hour Maximum sheet size: 1,020 x 720 mm Minimum sheet size: 560 x 370 mm Printing speed (IPH): 900 ～ 3,300 Print thickness: 0.1 ～ 0.8 mm

Condition: good (used), Year of construction: 1987, functionality: fully functional, Bobst SP 142 ER Year 1987 Max. Size: 1020x1420 mm Min. size: 700x520 mm Max. Speed: 6000 Sh/h Max. Cutting force: 600 T Hodsvhcgqspfx Addsng Centerline Micrometer setting in production