Straightening and cutting machine

VITARI NR 350 E

Condition: ready for operation (used), Year of construction: 1998, power: 37 kW (50.31 HP), pressing force: 250 t, stroke length: 150 mm, table width: 900 mm, table length: 1,000 mm, overall weight: 16,000 kg, Very nice and well maintained hydraulic press. 250 tons pressing force. Gijdsry Trpjpfx Achjw Approximate dimensions: H: 380 cm. W: 200 cm. L: 200 cm. Weight: 16,000 kg. Can be loaded by crane on collection against payment. Transportation can be arranged. Sold for customers. Location: DK-7600 Struer. Make an appointment for a demonstration.

Condition: excellent (used), Year of construction: 1995, Combination Unit: Manufacturer: GSG Feeder: Type: 840.02-027 Crusher Descaler: Type: 663.02-017 Wire Range: Ø5.5-16mm For wire rod with approx. 40-60 daN/mm² strength Crushing and Bending Rollers: Carbide Inserts Adjustment with 0.37 kW - 1.15 A gear motor Brush Drive with 0.25 kW gear motor, n=293 rpm Connection Voltage: 380-420 V 50 Hz Gisdpfxsr Nfvmj Achew Dry Coating Unit: Type: BSG/T Filling: Calcium Stearate (e.g., Traxit Type: D S 51 E) Stearate Consumption: approx. 350 g per t of wire Drawing Speed: max. 15 m/s Electrical Power: 2x 0.55 kW gear motors Cassette: 2 slots (supplied with 1x roller block + 1x cassette) Type: PKG/T (TS) Cleaned rolled wire Wire strength approx. 40–60 daN/mm² Wire range max. inlet diameter 9.5mm, finished diameter 3.5–8.5mm Roll dimensions min. Ø115mm, max. Ø125mm, Bore diameter Ø82mm, width 15–25mm Cooling pin diameter 25mm Cooling water consumption approx. 600 l/h Drawing machine: Manufacturer: Koch Type: KHZ 5000 Year of manufacture: 1993 Serial number: 13.821 Number of draws: 1 draw per block Drawing drum: Ø700mm Tensile force: mechanical 5000 N Wire material: mild steel wires Run-in strength: approx. 40 – 45 daN/mm² Maximum drawing range: Inlet diameter 5.0 – 8.5mm Cross-section reduction: 20 x 25% (mechanical gradation) Drawing speed: up to max. 7.0 m/s Brake: Twiflex, type: MRB Drive: AC motor/frequency converter, Siemens PN=110 kW, n=1485 rpm Spooler: Manufacturer: Koch Type: KHS 1250 Year of manufacture: 1993 Factory No.: 13741 Wire diameter: 5 – 8.5 mm Strength: approx. 55 – 70 daN/mm² Winding speed: V=7 m/s, adapted to the drawing machine Filling weight: approx. 3000 kg Spool drive motor: Three-phase motor with external fan Type: 1 PQ 6253 – 6 AA 70- Z A 15 + K 20 + C 14 + H 46 P=37 kW, n=1000-2000 rpm, IP54, design B3 Laying drive motor: 66-671U, 1.5 kW, 170 V, 9.8 A, 1680 rpm, IP 44, B5-200 With Attached tachometer generator TG 20, 20 V / 1000 rpm With attached spur gear SK 32, i=57.53, design B6 Hydraulics: Hydraulic excavator type: H13 AK Pneumatics: Twiflex disc brake type: MRB Pneumatic cylinder type: SPWG 28032-25mm stroke Dimensions: 3100 x 3000 x 1700 mm (L x W x H) without counterweight

Condition: used, Year of construction: 2014, functionality: fully functional, ⚡️ Top Service ⚡️ Fast Delivery ⚡️ Excellent Support! ✨✨Buy directly from the manufacturer and benefit from price and quality advantages!✨✨ Benefit from Proton's 40 years of experience in surface coating technologies. ➖➖➖➖➖ Gedpfxsiivq Us Achsiw ✅Contents of the system: ►1 unit - Gas-heated large powder coating oven ►1 unit - Automatic powder coating booth ►1 unit - Electrically heated small powder coating oven ►2 units - Room-type monocyclone manual powder coating booth ►6 units - Automatic powder coating gun ►3 units - Manual powder coating gun ►1 unit - Automatic powder recovery unit ►6 units - Monocyclone ►1 unit - Automatic control panel ►1 unit - Automatic rod movement system, speed-controlled ►2 units - Movable platform, speed-controlled ►8 units - Parking station ►300 m - Conveyor rail, 1000 kg capacity ►12 units - Rods for hanging Our system is located at Anhaltstr. 30, 14943 Luckenwalde. You can schedule an appointment to view the machines. The system has been in operation for 10 years. Since we are the direct manufacturer of the system, we can make any desired modifications to the machines by mutual agreement. Does it not fit into your existing assembly area? Then we can make changes to the layout. Please check the PDF file of the system using the link below.

Condition: used, Year of construction: 2005, Distance between centers 3050 mm Center height 280 mm Travel paths: Z-axis 2800 mm X-axis 400 mm U-axis 160 mm W-axis 160 mm Godpswz Rg Djfx Achsiw Max. workpiece weight 1000 kg Grinding wheel: Outer diameter (new) 1050 mm Max. width 120 mm Bore 304.8 mm Grinding wheel peripheral speed 6-50 RPM Accessories: - Measuring system - Tailstock - Coolant system - Documentation

Condition: good (used), Year of construction: 1976, Centre lathe Gisdpfswvir Iex Achow ZERBST - DPS 1800 MACH-ID 581 Make: ZERBST Type: DPS 1800 Year: 1976 Swing over bed Ø 1600 mm Swing over cross slide Ø 1250 mm Swing in the gap Ø 2100 mm Bed width 1400 mm Power 35 kW Speeds / ranges 180 Rpm

Condition: used, Year of construction: 1978, machine/vehicle number: 150 359 - 11683, functionality: fully functional, For sale are the PS160 (2 units) and the PS140 (1 unit). One is 250 metric tons, the other is 140 metric tons. The PS160 is one of the complete machines and is in operation; the PS160 does not have the control cabinet. Godpfx Acet Ucpbohjiw The machines are for sale as a single unit and individually. Inquire by phone or email!

Condition: used, Year of construction: 1989, pressure 250 t stroke 20 - 190 mm no. of strokes 24 / 48 /min throat 500 mm passage to the back 1000 mm dayligth 615 mm Gsdpjvut Ncefx Acheiw table surface area 1400 x 880 mm hole in the table 450/500 mm table height over floor 800 mm ram surface 1380 x 620 mm ram adjustment 125 mm power requirement 29,0 kW Weight 27,0 t dimensions of the machine ca. 2,0 x 2,6 x 4,1 m x m x m permitted for manual loading according to the German Safety Regulations (UVV) with motor with 2 speeds, pneumatic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, semi-automatic stroke adjustment, motoric centralized lubrication, two-hand operation can be inspected in running function in our warehouse

Condition: good (used), Make: Ursviken Type: VPF 1000/800-5,0 Control: Siemens Simatic panel Year: 1970 Hydraulic press for fabrication off large componts like dish heads tanks boiler shipyard and steelconstruction Renewed in 2015 with Siemens SIMATIC panel and E-Cabinet Rittal Build in height 2950 mm Maximum die height 1500 mm Movable Table & Piston in X-Ways Large package Die tooling radius 10/20/30/50/60/80/100 Pressing force 210 kg/cm2 Maximum stroke 800 mm Machine 2350 mm placed in ground Specifications Metric US Standard Capacity Kg 1000 Ton Distance between column 5010 mm Table Length 3000 mm Table Width 2000 mm Table Height 550 mm Ram stroke Gisdpfx Acjkvmi Sjhow 1450 mm Approche speed 50 mm/min. Working speed 5 mm/min. Return speed 50 mm/min. Dimensions (Estimate) Length 0 mm Width 0 mm Height 0 mm Weight 0 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 2019, operating hours: 4,525 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 12, BAR PEELING MACHINE AND BAR STRAIGHTENING MACHINE IN SET The equipment is in perfect working condition and can be inspected under power. Fully retrofitted in 2019 (completely new mechanics and electronics) Working range: Ø 20 – Ø 80 mm Bars length: 2.5 – 6.0 m Processing tolerance: ISO h9 (possible h8) Peeling depth: up to 3.5 mm, depends on the steel type Steel types: carbon steel, bearing steel, spring steel, etc. Feeding speed: digitally adjustable 0.5 – 12 m/min Cutting head revolutions: up to 1700 RPM Godpfswqb Scsx Achsiw Cutting tools: two sets of 4 knives each with automatic digital positioning (triangular and long knifes) Automotive loading table with bar counter Feeding roller with motorized height adjustment Infeed pressure rolls – 4 vertical rolls with inverted DC motor Peeling machine, consists of: - Front guiding system - Peeling head with 4 knifes - Rear guiding system Bar extraction carriage Main motor and transmission Output pressing rolls - tween Unloading table with motorized height adjustment Collector with counter and automatic collection of finished bars Hydraulic unit – completely new Electric cabinet – new of two modules.

Year of construction: 2019, condition: like new (used), MUT RWO 360/400-1150 Retort Heat Treatment Furnace - Like new: hardly used - Documentation available (both electronic and physical) - Pallet with spare parts included TECHNICAL DATA System type: RWO 360/400-1150 Furnace chamber temperature: ≤ 1150 °C for max. 1 hour Operating temperature: ≤ 1100 °C, ≤ 1050 °C in a vacuum Control stability: ± 2 K Temperature homogeneity: ± 6 K in the range of 600 °C to 1150 °C at the end of the stabilization period Control voltage: 230 VAC / 24 VDC Furnace working space: 360 x 400 mm Gsdpfx Acoiryyaehjiw Load: ≤ 50 kg Heating: Three-zone Pressure: ≤ 350 mbar Final vacuum pressure in the cold state: < 5 * 10-5 mbar in a clean, dry furnace Installation area: 900 x 1900 x 3000 mm Total system weight approx.: 1500 kg Sound pressure level: < 70 dB We assume no liability for the accuracy, completeness, and currency of the information provided.