Pasteur PA500-RWT-Gas Used

Voran PA500-RWT-Gas

Condition: new, Pasteurizer with tube heat exchanger Nominal capacity 500 l/h (80°C pasteurisation temp., 10°C inlet temp. juice) Thermal rating approx. 45 kW Electrical rating 1.1 kW Electrical connection 230V 50Hz (1 phase) Electrical protection 16 A Dimensions: Length 1,400 mm Width 900 mm Height 1,850 mm Weight (heating circuit drained) 330 kg Weight (heating circuit filled) 430 kg Material 1.4301 / AISI 304 Gas consumption liquid gas approx. 4 kg/h Gas consumption natural gas approx. 5 m³/h Max. exhaust temperature: 210°C Noise level (LW, A) 83 dB Pjdpfx Ajb Nur Djbuogu

Condition: excellent (used), Year of construction: 2008, Machining center Pgodpfsh E Sghjx Abuju Manufacturer: Weeke Type: BHX 500 Year of manufacture: 2008 Machining dimension X: 2,500 mm Machining dimension Y: 1,300 mm Machining dimension Z: 4 - 80 mm Number of routing heads: 2 Number of drilling heads: 2 Vertical drilling spindles: 72 Horizontal drilling spindles X: 16 Horizontal drilling spindles Y: 4 Notch saw: can be swiveled 90° Speed, X-axis: 130 m/min Speed, Y-axis: 80 m/min Speed, Z1-axis: 50 m/min Speed, Z2-axis: 27 m/min Rotational speed: 18,000 rpm Dismantled – available immediately

Condition: new, Year of construction: 2025, Dry rotary vane vacuum pump. Marpa Vacuum brand pump Pump completely new. 12 months warranty. Nominal flow: 140 m3 / h at 50Hz. Pgodpfxeftzhnj Abuou Final vacuum: 150 mbar abs. Any clarification, do not hesitate to contact us.

Condition: new, machine/vehicle number: 190040019, Inclined conveyor belt (4,000 x 390 mm) Pgedetvfb Njpfx Abuju Inclined conveyor belt with direct drive and PU-PVC belt

Condition: used, Year of construction: 1999, operating hours: 65,090 h, functionality: fully functional, ET365 GS with bar feeder and chip conveyor The machine is fully equipped - Collection tray - High-pressure pump - Control cabinet air-conditioning unit - Kupa loader - The machine was purchased from a running production operation and has been technically inspected - Geometry measured and all settings adjusted - Wearing parts replaced - All functions checked and adjusted as required The machine is fully operational and ready for immediate production Pedpfxsycvaqo Abujgu The machine is available immediately

Condition: used, Year of manufacture 2003 Pgodpfx Aow Upn Eobuju 2.2 kW 3.0 HP including documentation, COC

Condition: good (used), 50-position filler with crown cap closure. Podpfx Absvq Suisusgu Used in a winery for filling wine into 1L glass bottles

Condition: used, Year of construction: 2025, functionality: fully functional, Equipment: CE marking, Holz-Her Edgebanding Machine SPRINT 1329 Multi with motorized pressure beam PUR & EVA adhesive (up to 60mm) with the NEW GLU JET GJ725 PUR PRO including vacuum pump motorized infeed guide rail guide for narrow parts edge trimming IntelliSet - tool correction fa.s.t. - setup in the gap + remaining length display of the edge band roll iTronic - pressure & adhesive quantity control automatic chain lubrication second workpiece discharge + air cushion table in the infeed area fully motorized equipment for all units multifunction milling - radius 1.3mm (2x) & 2mm (2x) + nesting package, vertical, bottom spraying devices + padding unit with texture finish for normal applications and structured surfaces and more The machine is currently being refurbished at the factory in Voitsberg / Austria. Completion: approximately October / November 2026 Delivery, installation and training for the machine can be arranged directly through us for an additional fee. The machine is currently located in our delivery warehouse in Gratwein / Austria. In the event of discrepancies between the German version and a foreign language version, only the German version shall be binding. Pgedezx Ennepfx Abueu Our terms and conditions can be found on our website at holzher.de/de/agb.

Condition: good (used), Year of construction: 1997, Also available CONQUEST T51 model The used HARDINGE CONQUEST T42L 3-axis motorized CNC lathe is a robust and precise medium-sized inclined bed numerical control lathe, turning length approximately 700mm, bar passage 42m, automatic turret with 12 positions with motorized tools, FANUC 18-T CNC with color LCD and RS232 serial interface for data transfer 5″ ASA spindle maximum revolutions: 4,200 rpm continuous C-axis 20HP spindle power X-axis travel: 172mm Pgjdpsvtrc Sefx Abueu Z-axis travel: 575mm machine weight 4,000 Kg. Complete with 210mm AUTOBLOCK hydraulic chuck, tool presetting, programmable tailstock, 2 motorized tool holders (1 axial and 1 radial), chip evacuator, set of fixed and manual tool holders and backup disk; Year of construction 1997; machine compliant with “CE” standards, in excellent condition.

Condition: ready for operation (used), functionality: limited functionality, disc diameter: 525 mm, Weight approx. 1,900 kg Dimensions (L x W x H) approx. 1,800 x 1,500 x 2,200 mm Working disc diameter 525 mm Largest disc ring width 175 mm Largest workpiece dimension 170 mm Working disc speed 45/70/90/140 rpm Working power, main drive 4.0 kW Connection 400V/50Hz Emergency stop switch Psdpfxoh Invrj Abusgu Conventional control with operating panel Full-fledged lapping machine, conventional control