Wenzel LH 65

Wenzel LH 65

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: LH-M064774, measuring range X-axis: 650 mm, measuring range Y-axis: 750 mm, measuring range Z-axis: 500 mm, workpiece weight (max.): 270 kg, Offered for sale due to upgrade (we require a larger model): Wenzel LH65 3D Coordinate Measuring Machine with accessories New metrology software system Quartis R2022-2 Used but in very good condition Fixed price: EUR 22,500 net, ex-works 95369 Untersteinach, collection only Payment required before or upon collection Machine will remain in operation until early April 2026 and demonstrations are possible until then Technical data: - Model: LH 65/CNC - Year of manufacture: 2005 - First commissioning: 04/2006 - Serial number: LH-M064774 - Weight: 1,270 kg - Permissible workpiece weight: 500 kg - Regular maintenance and calibration carried out - Unit operated/located in a climate-controlled measuring room - Monthly usage: approx. 1 week Measurement range and accuracy: - Measuring range (X/Y/Z): 650x750x500 mm - Usable table area: 1450x850 mm - Measurement uncertainty according to DIN EN ISO 10360-2 for TP200 probing system - Measuring accuracy (MPE E): 2.6/1000 + (L/300) Cedpfx Ajyxv Eaeaaera - Temperature range: 20°C +/- 2K, 1.0K/h, 1.0K/m - Operating temperature: 15°C to 30°C - Relative humidity: 10% - 70% - Supply pressure: 6-10 bar, pre-filtered, quality as per ISO 8573-1, Class 4 or better Equipment: - CNC control - Renishaw probing system - Base plate made of natural hard stone with minor repairs (see photo) - Horizontal air bearing system LH on measuring table - Active pneumatic damping (instead of elastomer vibration dampers) - PC system & software: - Upgraded to WM Quartis R2022-2 (new price: EUR 23,740.50) - 4-channel PCIe interface card - USB keyboard, black, German layout - One LED monitor full HD (1080p) – 61 cm, 24” - Front panel PC Si-Esprimo P757 Accessories: - Reference ball, diameter 25 mm, ceramic, with M10 mounting - Small stylus kit M2 - PH10T motorized indexing probe head - PHC 10-3 Plus control unit for indexing head - 1x TP200 - 1x SF module - 1x SCR 200 - Various M2 styli (one piece each diameter 0.5mm, 1.0mm, 2.0mm, 4.0mm) - M2 rotating swivel joint - M2 stylus holder, length 19 mm - 1 hex wrench and 2 pin wrenches - Stylus holder in case - PC and controller cart with integrated desk - HAT-400 hand control panel - Documentation All information provided to the best of our knowledge and belief. Subject to change, errors, and prior sale. Sale without warranty.

Condition: good (used), Year of construction: 2003, In good technical condition and in working order. Year of construction 2003. X-axis 350 mm. Y-axis 250 mm. Z-axis 256 mm. Workpiece length: 750 mm. Workpiece width: 550 mm. Workpiece height: 250 mm. Machine dimensions: L 1670 mm x W 2040 mm, H 2305 mm. Machine weight approx. 2600 kg. Crodpfju Tq Hwex Aaaja

Condition: ready for operation (used), Year of construction: 1999, Travel X/Y/Z: 600mm/750mm/500mm, max. length measurement error: 3 + L/350, max. single-point error: 3, control: Pantec Eagle Pro/3. Includes test head PH10M Plus, PHC-2, sensor TP200, 20-piece probe set, calibration sphere, industrial PC, measuring software Inca 3D Premium with STEP and factory calibration. The machine can be equipped with additional options. Documentation available. An on-site inspection is possible. Cedpfxew H Auwj Aaajra

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 054344, Equipment: type plate available, Wenzel LH 65 Machine data: MBX 650-MBY 1000-MBZ 500 Serial number 054344 Year of manufacture: 2005 Controller: WPC 2030 Probe system: Renishaw Exchange bridge: Renishaw Software: Metrosoft CM 3.111 Software: Quartis R10 Probe head: PH 10M PHC: PHC 10 Csdpfx Aajxr Av Njajra Probe: 2x SM25-1 Probe: 1x SM25-2 Probe: 1x TM25 (adapter) DAkkS calibration certificate dated 05.09.2025 The coordinate measuring machine is fully functional and in excellent condition.

Condition: used, Year of construction: 2023, controller manufacturer: Mazak, controller model: Mazatrol SmoothAi, _____ Description: Year of manuf. : 2023 Control : Mazak Mazatrol SmoothAi Turning diam. : 600 mm Turning length : 850 mm In General: Year of manufacture:2023 Control system:Mazak Mazatrol SmoothAi Max. machining diameter:600 mm Max. machining length:850 mm Main spindle: Technology:Motor spindle Speed:6,000 rpm Power:11 kW Max. torque:184 Nm Bar capacity:51 mm C-axis:0.0001° Chuck:3-jaw chuck Clamping cylinder:Hollow clamping cylinder Sub spindle: Technology:Motor spindle Speed:6,000 rpm Power:11 kW Max. torque:184 Nm Bar capacity:51 mm C-axis:0.0001° Tailstock function:Yes Tool carrier (X/Y/ZB): Technology:Travelling column with milling spindle X-axis:535 mm Y-axis:210 mm Z-axis:900 mm B-axis:-30° / +210° Milling spindle speed:20,000 rpm Power:24 kW Tool magazin: Technology:Shelf magazine Number of stations:250 Tool changer:Double gripper Equipment: Chip disposal:Chip conveyor Coolant supply:Internal coolant system, 15 bar Workpiece measurement:Renishaw RMP 60 Tool measurement:Renishaw tool setter Bar loader:IRCO ILS-MUK 7012 Finished part removal:Parts catcher Software option I:5-axis simultaneous machining Software option II:Synchronous thread cutting Software option III:Cylinder interpolation Crodpoyrvzmjfx Aaasa Software option IV:Tool radius compensation Software option V:Tool length compensation Emulsion mist separator:Mechanical Setup mode:Electronical handwheel

Year of construction: 2000, condition: used, x-travel 1000 mm y-travel 1600 mm z-travel 800 mm Credpjt Hw Nysfx Aaasa Control WENZEL WPC 2040/FW31.351 total power requirement kW weight of the machine ca. 5500 kg dimensions of the machine ca. m Coordinate measuring m/c, software QUARTIS R12/16, Renishaw PH10Mplus

Condition: excellent (used), Year of construction: 2018, mazak j-200s technical dataFor this search query, no AI-generated overview is availableCurrently, an AI-generated overview cannot be provided. Please try again later.AI overview +6 The Mazak INTEGREX j-200S is a compact 5-axis multitasking machine with sub-spindle (S) for complex turning and milling operations. Key features include an 8-inch main chuck, a maximum machining diameter of {\(\emptyset 500\text{\ mm}\)}, and a machining length of up to {\(910\text{\ mm}\)}. The B-axis offers a swivel range from {\(-30^{\circ }\)} to {\(+190^{\circ }\)}. Main technical data (Integrex j-200S): Machining capacity:Max. swing diameter: {\(530\text{\ mm}\)}Max. machining diameter: {\(\emptyset 500\text{\ mm}\)}Max. machining length: {\(910\text{\ mm}\)}Main spindle & sub-spindle:Chuck size (main & sub-spindle): 8 inchesMain spindle speed: {\(5,000\text{\ min}^{-1}\)}Main spindle power (40% duty cycle): {\(18.5\text{\ kW}\)}Milling spindle (B-axis):Speed: {\(12,000\text{\ min}^{-1}\)} (typical for the j-series, may vary with optional configurations)Swivel range: {\(-30^{\circ }\)} to {\(+190^{\circ }\)} (or a total range of 220°)Tool interface: KM63 or CAPTO C6Axes & capacity:Y-axis travel: {\(200\text{\ mm}\)} ({\(\pm 100\text{\ mm}\)})X/Z axes: {\(450\text{\ mm}\)} / {\(1119\text{\ mm}\)}Tool magazine: 20–36 tools (depending on configuration)Control: MAZATROL SmoothG or Matrix Nexus 2 The machine features a full C-axis for both spindles and an automatic tool changer, making it suitable for highly productive applications in a compact design. Crodpfx Aaeyfgdloaoa

Condition: ready for operation (used), Year of construction: 2014, operating hours: 27,608 h, controller manufacturer: SIEMENS, This 5-axis DMG MORI CTX beta 800 TC was manufactured in 2014. It features a main spindle speed of 5,000 RPM and a sub spindle speed of 6,000 RPM, along with a 30-piece tool magazine. Ideal for complex turn-mill operations, consider the opportunity to buy this DMG MORI CTX beta 800 TC turn-mill centre. Contact us for further details regarding this machine. Crsdpox U D Hqsfx Aaasa • Tools: 30 pcs • Incl tools shown on the pictures • Excl barfeeder

Condition: excellent (used), Year of construction: 2002, Deckel Maho DMU 80 P-Hi Dyn 5-Axis CNC Machining Center Year of manufacture: 2002 Control: Heidenhain 430 X-axis travel: 800 mm Crodpfsx Dlf Rsx Aaaea Y-axis travel: 700 mm Z-axis travel: 600 mm B-Axis: Automatic swivel milling head C-Axis: NC rotary table: 900x630 mm Workpiece weight: 800 kg Tool holder: SK40 Tool changer: 60 positions Accessories: Chip conveyor High-pressure coolant 40 bar (IKZ) Handwheel Heidenhain TS 642 probe

Condition: new, The split separator has a diameter of 900 mm and can be supplied with sound insulation on request. Drive electric motor 0.75 kW Csdpovuku Nefx Aaaera