Temperature control unit single-circuit temperature control unit

WITTMANN MTC Primus-C90 F27

Condition: new, *Technical specification: -air-cooled, 25.5 kW referred to +10°C flow temperature at an ambient temperature of +32°C. -temperature range flow: +5°C to +30°C (optionally lower temperatures down to -5°C possible) -air flow rate: 8,000 m³/h -max. air inlet temperature: +30°C -Optionally with heating capacity up to 24kW *Pumps: -Delivery capacity up to 150 ltr/ min. -Delivery pressure up to max. 4 or 7 bar -Motor output 1.1 or 2.2 kW *Dimensions: -L/W/H: 1,450 mm x 750 mm x 1,680 mm -empty weight: approx. 480 kg -Circulation medium connection: DN 32 IG *Details & Highlights: -Internal refrigerant: R 123 a -Power supply: 380-425V/ 50Hz -Regulation and control unit SBC-T -Setpoint and actual value display, alarm display -Fully hermetic reciprocating compressor -Refrigerant receiver with safety valve according to DIN EN 378 -capacity control -frost protection monitoring -Flow monitoring -grid cover over condenser Dwjdpfx Aljg Ewwrs Ssc -oil sump heater -drainage device -Level monitoring by magnetic float switch -installed dirt trap in the return line in the circulating medium -overflow valve between flow and return as pump protection, fixed setting -high and low pressure limiter according to DIN EN 378 -stainless steel tank, capacity: 80 litres, open system completely insulated Self-supporting housing with castors, mobile -system for indoor installation -control box IP 54 Other performance classes are available on request. Visit our homepage for further details. *This unit conforms to the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Year of construction: 2003, condition: excellent (used), Display – Demag Year of manufacture approx. 2003 Dodpfxohi Ttns Al Sowc

Condition: used, Year of construction: 2004, clamping force: 110 kN, displacement volume: 2,926 cm³, injection pressure: 1,600 bar, overall weight: 5,650 kg, screw conveyor diameter: 45 mm, terms of delivery: EXW (ex Works) delivery time: on request Dedozh N Tyjpfx Al Sswc terms of payment: 100% prior to delivery

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, 5 Wittmann temperature control units are available for sale; the price is for 1 unit. Dwsdpfx Aoy In Dyol Sec Medium: Water Operating temperature: max. 90°C Heating capacity: 9 kW Cooling capacity: 25 kW

Condition: new, Year of construction: 2026, CORMAK SM150D Belt Grinder The CORMAK SM150D belt grinder is an industrial machine designed for intensive operation in production plants, locksmith workshops, and tool rooms. It is a metal belt grinder that combines high grinding efficiency with an effective dust extraction system, ensuring safety, cleanliness, and comfort in everyday use. Its solid steel construction and large worktable surface guarantee stability and precision, even when processing large components. Main Advantages Two belt speeds (14.5 / 29 m/s) – allows adjustment of speed to the type of material and nature of work (coarse or finishing grinding). Integrated dust extraction system – ensures a clean and safe working environment without the need for external dust collection units. Stable steel construction – effectively reduces vibrations, improving repeatability and machining quality. Large worktable (480 × 150 mm) – allows comfortable handling of larger workpieces. Stepless grinding angle adjustment – enables precise positioning of the belt relative to the workpiece. Quick belt change system – minimizes downtime and improves work efficiency. Design and Technology The stationary CORMAK SM150D grinder is built on a welded steel frame, ensuring rigidity and resistance to dynamic loads. The integrated extraction system provides highly efficient removal of dust and grinding debris. A 2.8 kW motor delivers sufficient power for demanding machining tasks. Precision and Efficiency Thanks to the use of a 150 mm wide and 2000 mm long belt, the machine provides a large contact surface, reducing processing time and increasing efficiency. The two belt speeds allow for a quick switch from aggressive material removal to fine surface finishing. The ergonomic design and spring-loaded belt tensioning system ensure proper belt tension throughout the work cycle. Applications The CORMAK SM150D metal belt grinder is suitable for use in: production plants working with steel, stainless steel, and aluminum, welding and locksmith workshops, surface preparation and finishing departments, grinding edges, welds, and flat surfaces. Standard Equipment Stable steel base with tilt adjustment Grinding belt 2000 × 150 mm Built-in dust extraction system with bag and Ø100 mm ports Dsdpfx Asxrzgtol Sjwc Spark and dust protection cover Adjustable protective shield Technical Specifications Parameter Specification Abrasive belt dimensions (L × W) 2000 × 150 mm Belt speed 14.5 / 29 m/s Motor speed 1400 / 2800 rpm Motor power 2.8 kW Machine dimensions (L × W × H) 700 × 540 × 1130 mm Weight 90 kg Power supply 400 V Extraction port diameter 2 × Ø100 mm Worktable dimensions 480 × 150 mm Chip bag diameter Ø100 mm Chip bag length 500 mm

Year of construction: 2004, condition: used, Koch dryair tanks 1x100 L 1x200 L 1x400 L with auxiliary heating Regulator Dsdpfsxltdwsx Al Sjwc Art.-Nr.: 2294 year: 2004 price: 7.400.00 contact: Mr. Rainer Eckerle

Year of construction: 1998, condition: used, dryer dryair Simar (art.2236) Simar dry air dryer Simar KT 100 2x 75 kg Tank year 1998 price: 4200 € Dsdpfoiicxmex Al Sowc Contact: Mr. Rainer Eckerle

Condition: good (used), Year of construction: 2005, Ref. no.: 18565 Manufacturer: DEMAG Type: 150-610. System NC4 Year of construction: 2005 Clamping unit Clamping force: 150 ton Opening stroke: 500 mm Distance between tie bars: 500 x 500 mm Mould height min.: 250 mm Opening width: 750 mm Platen size (h x v): 750 x 750 mm Injection unit Screw diameter: 45 mm Injection volume: 323 cm³ Shot weight: 290 g Injection pressure: 1973 bar Measurements and weight Dimensions: 5.45 x 1.63 x 2.1 m Machine weight: 7500 kg Robot Producer: Wittmann Type: W721-0231 Year: 2005 Further information: The Demag Ergotech System series hydraulic injection moulding machine is a suitable plastic injection moulding machine for technical plastic parts and automated serial production applications. Thanks to its hydraulic operating principle, the machine offers powerful and stable injection performance, while the Demag NC4 control system ensures precise process control. The machine is equipped with a Demag (Wittmann) DR721 linear robot. Robot specifications: Year of manufacture: 2005 X-axis: 550 mm Y-axis: 1000 mm Z-axis: 2000 mm The robot system enables fully automatic part removal, conveyor transfer, and automated serial production processes. Dwodjxhfuaopfx Al Sjc In addition, the machine comes with 2 complete spare plasticizing units / injection units (screw and barrel assemblies). The machine was in running production and operating without problems until dismantling.

Year of construction: 2008, condition: used, Gerco dryairdryer GTT 201 L 8.5 year 1991 preis: 1.650 € Contact: Mr. Rainer Eckerle Dwjdpfsq Tb Iqox Al Ssc

Condition: used, Gerco dryairdryer GTT 201 E 8,5 KW 200 Liter Tank year 2006 preis: 3.750 € Dedpfoq Tb N Iex Al Sowc Contact: Mr. Rainer Eckerle