Horizontal machining center

WMW HECKERT CWK 400

Condition: refurbished (used), 1. Machine Specifications * 2 work tables with automatic pallet changer - Clamping area 400 x 400 mm - Perforated pallets - Max. clamping weight 400 kg - NC rotary table - Rotatable clamping position * Travel ranges - Column longitudinal travel (x) 650 mm - Support vertical travel (y) 500 mm - Table transverse travel (z) 650 mm * Max. feed rate 36 m/min * Rapid traverse 40 m/min * Working spindle - Tool interface - SK 40 DIN 69871 - Drive power 24 kW AC - Torque 230 Nm - Speed range, stepless 0 ... 10000 rpm * Coolant supply through the spindle center 50 bar * Tool magazine 60 positions * Control system Sinumerik 840 D * Machine bed made of mineral cast * Enclosed work area protection * Chip conveyor * Paper band filter system 2. Technical Condition The machine was only used in production until February 2013! Due to the overhaul, the machine meets the acceptance conditions for new machines. - The machine was completely disassembled and cleaned. - All compact guides and ball screw drives were replaced. - The main drive motor and feed motors were inspected in authorized workshops and, if necessary, refurbished. - The main spindle body was replaced with a new one, the spindle was re-bearinged, and run-in on the test stand. - All cables, air lines, and defective sensors were replaced. - Table assembly, magazine, tool changer, and coolant system were overhauled. - The panes of the work area protection were renewed, and a new paint job was applied. In addition, a new main spindle and a new Kessler motor can be supplied as spare parts. 3. Warranty: last inspection 03/2013; 3 months 4. Prices: * Machine €110,000.00 * Installation/Commissioning €6,000.00 (for installation/commissioning abroad, travel costs will be added) 5. Delivery Conditions: * Pricing: Prices are quoted net for delivery or service ex works. We reserve the right to sell the machine in the interim. Our delivery and service terms and conditions apply. * Payment terms: 30% down payment upon order against invoice Fedez H Tn Aspfx Aanepp 60% upon delivery 10% upon handover * Delivery time: 4 weeks

Condition: good (used), Year of construction: 1984, max. wheel diameter 250 mm gear width 275 mm max. module 6 weight of the machine ca. 5,5 t The gear hobbing machine ZFWZ 250 is suitable for the economical production of all hob-processable cylindrical gear types, such a: - spur and helical gear, wormgears and worms, splined shafts, keyed shafts, serrated profiles, chain wheels and ratchet wheels,as well as conical and Fedpsv T Nqaofx Aanopp crowned spur and helical gears. Interchangeable wheels and milling accessories Technical data: - Workpiece diameter (max): 250 mm - Module (max): 6 mm - Axial feed travel (max): 275 mm - Tangential feed travel (max): 100 mm - Tooth helix angle (max): 45 degrees - Milling cutter diameter (max): 145 mm - Milling cutter length (max): 170 mm - Table clamping surface (min): 195 mm - Table clamping surface (max): 470 mm Power Milling cutter speeds - Stepped in 2 ranges: 56 ... 250 rpm - (Standard version): 90 ... 400 rpm - Infinitely variable in 2 ranges: 63 ... 180 rpm - (special version DC motor): 140 ... 400 rpm Weights - Machine net: approx. 5000 kg - Electrical cabinet: approx. 800 kg - Hydraulic unit + coolant tank + chip transport: approx. 700 kg Overall dimensions (with oil mist filter) - Length: Standard version: 3950 mm DC drive: 3450 mm (or 3350 mm according to table) - Width: 3300 mm - Height: Machine: 1980 mm Machine with DC drive: 2150 mm Electrical cabinet: 2200 mm

Condition: used, Year of construction: 2002, x-travel 650 mm y-travel 650 mm z-travel 650 mm Control Siemens 840 D Fpsdpfxozmy Tus Aanjp weight of the machine ca. 12 t

Condition: used, Year of construction: 2013, max. wheel diameter 260 mm gear width 320 mm max. module 4,5 min. module 0,5 Control SIN 840D max.helical angle +/- 45 ° total power requirement 68 kW Fedpfsx R U Hgex Aanjpp weight of the machine ca. 15,50 t dimensions of the machine ca. 3,25 x 3,25 x 3,30 m Fire extinguishing system Siemens Sinorix TM Knoll Filtering system VL1500/8000 year 2017 Wekal loading cell

Condition: good (used), Year of construction: 2001, functionality: fully functional, Horizontal Boring Mill UNION T110 Year of manufacture: 2001 Travel axes: X: 1500 mm Y: 1250 mm (total vertical adjustment) 0 mm - lowest position of the spindle center to the table surface Z: 1000 mm W: 550 mm (quill movement) B: 360° infinitely variable Spindle diameter: 110 mm Transmission steps: 2 Max. spindle speed: 4000 rpm Rapid traverse: 15 m/min Spindle taper: SK 50 Clamping table surface: 1000 x 1250 mm T-slot width: 22 mm Height of clamping surface above floor: 1050 mm Max. table load: 6 t Total weight (complete): approx. 13.5 t Fedpjy Rpm Uofx Aanopp Control system: Heidenhain TNC 426 Electronic handwheel Various tool holders can be purchased additionally.

Condition: used, Year of construction: 2004, functionality: fully functional, turning length: 1,000 mm, turning diameter over cross slide: 350 mm, TECHNICAL DATA Turning diameter: max. 465 mm Turning length: 1050 mm Diameter when turning: 680 mm Chuck diameter: 325 mm X-axis travel: 300 mm Z-axis travel: 1050 mm Control system: Fanuc Series 21I-TB Spindle speed range: Max. 3500 rpm Drive power: 33 kW Fsdpfxev Epzvs Aanjpp Torque: max. 630 Nm Bearing diameter in the spindle: 120 mm Max. bar diameter: 90 mm Tailstock stroke: 850 mm Tool post stroke: 150 mm Rapid traverse X/Z: 30 m/min Number of tool positions: 12 positions Tool holder: VDI 40 Accessories: Chip conveyor Tool holders, chuck jaws

Condition: reconditioned (used), Year of construction: 2008, operating hours: 13,600 h, functionality: fully functional, machine/vehicle number: 106, Machine partially overhauled by Willemin with new geometry and a new secondary spindle (6,000 rpm). New ball screws on X-Y-Z axes. Alignment and calibration. Fpsdpew T Tlrofx Aanep Ready for production. 5 axes – Fanuc 31i A5 – HSK40E – max 30,000 rpm – Year 2008. Country of manufacture: Switzerland Voltage: 3x400V / 60Hz; 50 A; 35 kVA Dimensions: 270x200x260 cm Net machine weight: 2,500 kg TECHNICAL SPECIFICATIONS WILLEMIN MACODEL 508 MT Control: Fanuc 31i A5 X axis: 450 mm Y axis: 200 mm Z axis: 425 mm B axis: -45° to +100° U axis: 300 mm Tool magazine: 48 PickUp stations Main spindle A: max Ø42 mm, max 6,000 rpm Main spindle C: max Ø42 mm, max 3,000 rpm Milling motor spindle: HSK40E, max 30,000 rpm All technical details are given without obligation and subject to errors or omissions.

Condition: good (used), Year of construction: 1997, Also available CONQUEST T51 model The used HARDINGE CONQUEST T42L 3-axis motorized CNC lathe is a robust and precise medium-sized inclined bed numerical control lathe, turning length approximately 700mm, bar passage 42m, automatic turret with 12 positions with motorized tools, FANUC 18-T CNC with color LCD and RS232 serial interface for data transfer 5″ ASA spindle maximum revolutions: 4,200 rpm Fpjdpjvtrc Sefx Aanop continuous C-axis 20HP spindle power X-axis travel: 172mm Z-axis travel: 575mm machine weight 4,000 Kg. Complete with 210mm AUTOBLOCK hydraulic chuck, tool presetting, programmable tailstock, 2 motorized tool holders (1 axial and 1 radial), chip evacuator, set of fixed and manual tool holders and backup disk; Year of construction 1997; machine compliant with “CE” standards, in excellent condition.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, workpiece weight (max.): 5 kg, total width: 360 mm, total length: 700 mm, Universal dynamic balancer for rotors from 10g - 5kg Fpodpfx Aasuh Svpsnep

Condition: used, scrubber dryer, floor cleaning machine, mop machine -Handover in the current condition as inspected -Device is without battery brush and suction bar -Working width: 500 mm -Charger Fpedpfxoc R S E Sj Aanop -Quantity: 1 piece available -Dimensions: 1150/520/H950 mm -Weight without battery: 66 kg