Clamping Cube

WMW AW 1020x810

Condition: good (used), Spindle diameter: 80 mm Spindle nose: SK50 Spindle speeds: 11 - 1000 RPM X-axis movement: 1700 mm Y-axis movement: 1800 mm Z-axis movement: 1800 mm Spindle out (W-axis): 710 mm Table size: 1100 x 900 mm Elbo Digital readout: On Y-axis and Z-axis Featured with: - Turning table - Toolholders Spindle engine: 7,5 KW Machine LxWxH: 5100 x 2650 x 3300 mm Godsphl Ecjpfx Abdoil Machine weight: 10 Ton

Condition: used, Year of construction: 1982, spindle diameter 90 mm x-travel 900 mm y-travel 900 mm z-axis 1200 mm w-axis 800 mm table surface area 900 x 1200 mm Gsdpfx Astv H Ucobdsil rotation movement 360 Grad table load 6,0 t turning speeds 25 - 1400 U/min spindle taper ISO 40 voltage 380 V / 50 Hz drive milling spindle 9,2 kW total power requirement 35 KVA weight of the machine ca. 10 t dimensions of the machine ca. 4,5 x 2,8 x 2,5 m • Machine had been completely refurbished in 1994 by the manufacturer • new switch cabinet, • new Servo-drive BOSCH and HEIDENHAIN-control TNC 360,(3D control) • valve plate Ø 600 mm. • traverse distance: 150 mm The machine is currently not ready for demonstration due to a fault in the electrical system.

Condition: good (used), Year of construction: 1980, Diesel emergency generator MWM Mercedes - AEG built in 1980 with switch cabinet, cooler. Diesel engine MWM 8 cylinder 405 HP Generator AEG Type:SIRI 100 D/4 330KVA . Gisdpfx Abet In Nyodjl

Condition: used, length 1000 mm width 570 mm height 1200 mm Gedpsh Ig Tpsfx Abdoil weight of the machine ca. 0,4 t dimensions of the machine ca. 1,x0,6x1,2 m used angle plate in good condition with several bores for clamping.

Condition: good (used), machine/vehicle number: 21494, OFFER 21494 Technical data: - Clamping surface approx. L 900 x D 600 mm - Table height 480 mm - Circumferential water channel Giedpfx Ajhii R Dsbdel - 3 pieces T - grooves M 16 L 900 mm - lateral flange plate - Space requirement L 1000 x D 760 x H 480 mm - Weight approx. 300 kg

Condition: used, Cast iron clamping cube 2 faces Length: 1000 mm Height: 600 mm Giodjw Aavkopfx Abdjl Depth: 800 mm T-slots dimensions: 38 x 22 mm Weight: approx 600 kg

Condition: used, Technical details: length: 1000 mm width: 1100 mm height: 610 mm weight of the machine approx.: 1139 kg Gedpju Nva Dsfx Abdjil Drill cube material made of cast steel. Bohrwürfel Material aus Stahlguss. T-Nuten nach DIN 650m - Spannfläche vertikal: LxT: 1000 x 610mm - Spannfläche horizontal: LxB: 1000 x 1100mm *

Condition: excellent (used), Year of construction: 2007, overall weight: 3,800 kg, total length: 900 mm, total width: 900 mm, total height: 1,400 mm, construction height: 1,400 mm, 1 used clamping tower Manufacturer: Schunk Type: Unilock 2x8 NSE 138T Year of construction: 2007 Technical Data: Hybrid tensioning tower with T-slots Screw-in system Zero point clamping system LxWxH= 900x900x1400 Weight: 3800 kg Spring-loaded system - Pneumatic opening Turbo function Technical data: Dimensions: Ø138 x Ø110 x 59 mm Pull-in force: 7 kN Pull-in force with turbo: 24 kN Gijdpfxeuykhkj Abdsl Actuating pressure: 6 bar Repeat accuracy: < 0.005 mm Weight: 3.5 kg

Condition: used, length 1000 mm width 700 mm Gijdowq S Dijpfx Abdjl height 630 mm weight 940 kg Clamping cube 1000x700x630mm for a radial drilling machine or other purposes.

Condition: used, Technical details: width: 700 mm depth: 600 mm height: 910 mm weight of the machine ca.: 440 kg dimension L-W-H: T: 600 x B: 700 x H: 910 mm Steel plate welded, 80mm thick, with stiffener Gisdpfxsu N Eats Abdol surface finished Clamping surface vertical: 6x T-slot according to DIN 650: a=24mm; h=45mm; b=43mm; c=18mm; distance 140mm Clamping surface foot: L: 600mm x W: 700mm, 7x clamping hole *