Paper cutting machine

Wohlenberg 92 Paper Guillotine

Condition: excellent (used), Year of construction: 2019, Ref: 10965 . 2019 Horizon HT-1000V Variable Trimmer ONLY 2.2m books trimmed! Inline or offline variable three-knife trimmer capable of zero make-ready on book trim size and thickness changes. Perfect for short run production, and book of one production which can be achieved through barcode driven set-up. Features: Setup automatically on the fly by reading a barcode at the entrance of the trimmer. Also capable of automatic set-up from the operator panel for same size production runs. One-to-one book production with variable sizes can be produced. Both untrimmed and trimmed sizes can be variable, for true variable format production. Can be used solo or placed in-line with Horizon perfect binders. Specification: Untrimmed Book Size: Max. Spine Length 350 x Fore-edge Length 320 mm/ 13.780” x 12.600” Limitation: Maximum length from the center to top or bottom is 175 mm/ 6.889”. Min. Spine Length 148 x Fore-edge Length 105 mm/ 5.825” x 4.130” Limitation: The minimum length from the center to top or bottom is 74 mm/ 2.91”. Trim Width: Fore-edge: Max. 110 mm/ 4.330” Min. 1 mm/ 0.04” Top and bottom: Max. 80 mm/ 3.150” Min. 1 mm/ 0.04” Nedpfx Aswu Sptsacsku Trim Height: 1 to 65 mm/ 0.04” to 2.560” Production Speed: 400 to 1,000 cycles per hour (Higher production can be reached with piled books)

Condition: used, Schneidmaschine / Guillotine Wohlenberg CUT-Tec 92 Year 2007 - Serial-No. 3932-009 Njdpfx Ajwgbt Sjacsku Schnittbreite max. 920mm / Cutting width max. 920mm Programm - Duisplay / Program - Display Lufttisch - Chromtisch / Light guard - chrome table CE-Zeichen-Zulassung / CE Certificate Elektr. Anschluss / Power supply 3 Phase 380V - 10A Ersatzmesser / Spare knives Sehr guter Zustand - in very good Condition Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: good (used), Wohlenberg 132 TS Paper Cutting Machine Machine in very good condition, ready for production. Year of manufacture 2008. Available immediately from stock. The guillotine can be used as a stand-alone unit or integrated with cutting systems. Program generation takes place in the menu and includes various cutting tasks, e.g. Single cut, Programming, Multiple cut, Non-cutting pressure, Automatic actual value transfer. Premium class cutting machines from the Wohlenberg brand are manufactured in Germany in Solms. Distinguishing features of the Wohlenberg machine: – Interactive user interface – 18.4” touch screen – MIS integration (optional) – USB interface – Ethernet interface – Windows CE operating system – CIP data module Nedpfx Aow D E Saeacoku – Positioning via electronic handwheel – Optimized cutting cycle – Programmable hold-down pressure – Automatic adjustment of the hold-down pressure to the cutting width – Automated knife change from the front – Quick knife change – New machine body cast in one piece = higher stability – Maintenance-free electromagnetic clutch Technical data: Cutting length: 1320 mm Maximum stack height: 165 mm Infeed depth: 1325 mm Smallest cut with sheet metal under the pressure beam: 77 mm Smallest cut without sheet metal under the pressure beam: 20 mm Maximum saddle feed speed: 300 mm/s Maximum mechanical efficiency of the knife: 44 cycles/min Saddle guidance: above the work table Main engine power: 4.5kW Net weight: 3410 kg The machine is equipped with a spare knife, sticks, a pressure plate, documentation, tools.

Condition: used, Falzmaschine / Folding machine  Heidelberg Stahlfolder  Ti52/4 --Neue Falzwalzen / new folding rollers-- Baujahr / Year 2003 - Serial-No. F.00235 Flachstapelanleger / Flat Pile Feeder Arbeitsbreite max. 520mm / Working width max. 520mm 1. Station 4 Taschen / 1. Folding Unit 4 Buckles Schuppenauslage / Stream delivery Stahl SAK Inklusive Handbücher / Included Manuals Njdpjxu Ufuofx Aacjku Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: good (used), Year of construction: 2006, Year of Manufacture: 2006 Counter: 0.4 million _____ Machine Overview: The BOURG BB 3002 is a high-performance perfect binder engineered for efficient and precise bookbinding. Renowned for its robust construction and user-friendly operation, this machine is ideal for medium to large print shops seeking high-quality perfect binding results. _____ Technical Specifications: • Binding Method: Hot melt adhesive perfect binding • Maximum Book Size (height x width): approx. 450 mm x 320 mm (17.7” x 12.6”) • Minimum Book Size (height x width): approx. 105 mm x 120 mm (4.1” x 4.7”) Nodpfjw Durcjx Aacsku • Maximum Book Thickness: up to 60 mm (2.36”) • Binding Speed: up to 2,000 books per hour (subject to book thickness and operator proficiency) • Spine Preparation: Milling or roughening device for optimal glue adhesion • Glue Application: Hot melt glue system with adjustable temperature settings • Cover Feeder: Manual or semi-automatic (depending on configuration) • Book Clamp: Adjustable clamps for secure holding of the book block during binding • Control System: Electronic controls with display for intuitive operation and monitoring • Dimensions (L x W x H): approx. 3,200 mm x 1,200 mm x 1,600 mm (126” x 47” x 63”) • Power Supply: 400 V / 50 Hz (three-phase) • Weight: approx. 1,500 kg (3,300 lbs) _____

Condition: used, The Horizon APC-T61 is a high-performance hydraulic guillotine designed for precision cutting, ideal for small and medium-sized printers and binderies. This machine is practically new, fully operational, and ready for immediate production. Key features of the APC-T61 include its ability to save programs to memory, an electronic digital display with an accuracy of 1/10 mm, and easy program initiation with a Zollstart Zoll button. The knife beam and hydraulic pressure drive ensure precise and efficient cutting. Technical specifications of the APC-T61 are as follows: Cutting length: 610 mm Batch depth: 620 mm Pile height: 100 mm Power supply: 380V / 50Hz Power: 3 kW Weight: 700 kg The machine comes with a comprehensive set of accessories, including a spare knife, shaft, operating tools, tapping block, and manual. Currently in stock and located in Germany, the Horizon APC-T61 Hydraulic Guillotine is a reliable and efficient solution for your cutting needs. Format: 610 mm Equipment: Horizon APC-T61 Hydraulic guillotineThe machine is practically new, fully operational, ready for h-performance, precise hydraulic cutter ??? for small and medium-sized printers, bindery Control:Ability to save programs to memoryelectronic digital display with an accuracy of 1/10 mmstarting the program with the Zollstart Zoll buttonKnife beam and hydraulic pressure drivecutting linepre Technical data:Cutting length 610 mm 620 mm batch depth Pile height 100 mmPower supply 380V / 50Hz3 kW power Weight 700 kg The set includes: spare knife, shaft, operating tools, tapping block, manu Nkedpfx Aow Irlgsaceu

Condition: excellent (used), Year of construction: 2005, Polar 78 XT high-speed cutter - Year of manufacture: 2005 - Cutting width: 78 cm - with light barriers - with air table Nodpfx Aaeyit Ncjcsku - Touchscreen color display

Condition: used, Year of construction: 2012, operating hours: 10,000 h, functionality: fully functional, cutting width (max.): 800 mm, insertion depth: 800 mm, insertion height: 150 mm, cutting length (max.): 800 mm, overall weight: 500 kg, type of input current: three-phase, total width: 160 mm, total length: 200 mm, input voltage: 400 V, Equipment: documentation/manual, safety light barrier, The MOHR 80 cutter is engineered for single-shift operation and features a precise, gentle swing cut actuated hydraulically, allowing the dwell time of the knife at the lower dead point to be tailored to the material. The ultra-smooth stainless-steel table, fitted with air jets, makes material handling effortless. Clamping pressure is infinitely adjustable via a scaled rotary knob to accommodate a wide range of cutting materials. High-visibility LEDs clearly indicate the cutting line for the operator. Operation is carried out through an ergonomically positioned 18.5’’ touch-screen display. The machine can store up to 1,998 cutting programs for rapid recall and flexible adaptation of recurring sequences. Integrated into a digital workflow, cutting data can be received directly from pre-press into Compucut® in ppf- or jdf-format, which then automatically generates the appropriate cutting program. A barcode reader enables automatic program retrieval and execution, effectively reducing set-up times to nearly zero. Process visualization graphically displays material handling, significantly minimizing error risk. To further optimize cutting quality, the pre-clamping time can be adjusted based on the material being processed. Key features: - Barcode reader for automatic creation and loading of assigned cutting programs via Compucut® - Process visualization for graphical representation of material handling, minimizing error risk - Rigid machine frame engineered for optimal stability, maximizing absorption of cutting forces and ensuring superior cutting accuracy - Minimal maintenance requirements thanks to the use of advanced materials Technical specifications: - Cutting width: 800 mm (31.49 in) - Feeding depth: 800 mm (31.49 in) - Maximum feeding height: 100 mm (3.93 in) - Clamping pressure: minimum 180 daN (397 lbs), maximum 2,700 daN (5,953 lbs) - Backgauge speed (return): up to 130 mm/sec (5.12 in/sec) Nksdpfsxwnxgjx Aacou - Minimum automatic cut without false plate: 15 mm (0.60 in) - Minimum automatic cut with false plate: 50 mm (1.96 in) - Dimensions (W × D × H): 1,430 × 1,970 × 1,500 mm (56.29 × 77.55 × 59.05 in)

Condition: good (used), Polar Mohr N92 PRO HD Paper Cutting Guillotine Machine in perfect condition, serviced, and ready to work. Manufactured in 2021. Unprecedented model on the market. Cutting visualization on the monitor. Nodpfx Asyi Dcgoacsku Technical specifications: Cutting width: 920mm Stack height: 130mm Programmer with a 21.5” HD color touchscreen display 400V power supply Weight: 2000kg Enlarged side tables Chrome table surface Table backlight and optical cutting line Flexibly adjustable clamping force Additional rear table covers Spare knife, cutting sticks, tapping block, and operating tools.

Condition: used, Year of construction: 1997, Horizon HT-70 Three-Knife Trimmer, used The Horizon HT-70 is a powerful and robust three-knife trimmer that can be operated both inline and offline. It is excellently suited for precise finishing of books and brochures. Key Features: - High productivity with up to 1,000 cutting cycles per hour - Clean and precise cuts without rough edges - User-friendly LCD display for easy operation and status monitoring - Flexible processing of various product sizes - Quick changeover times of less than 10 minutes - Advanced interlocking system for operator protection Technical Details: - Cutting thickness: 2 - 50 mm - Number of knives: 2 - Untrimmed dimensions: Maximum: 330 x 330 mm; Minimum: 148 x 105 mm - Trimmed dimensions: Maximum: 300 x 300 mm; Minimum: 142 x 100 mm Nksdpfxow Eu Uaj Aacju - Dimensions (L x W x H): 2260 x 1160 x 1600 mm - Weight: approx. 1530 kg All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Upon request, we can also provide a customized leasing offer. Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.