Universal machining center

Z-MaT Power V10 New Design 3+2 Achs

Condition: excellent (used), Year of construction: 2017, operating hours: 16,193 h, functionality: fully functional, travel distance X-axis: 850 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, rotational speed (max.): 15,000 rpm, number of slots in tool magazine: 38, swivel angle A-axis (min.): -139 °, swivel angle A-axis (max.): 91 °, swivel angle C-axis (max.): 360 °, A similar machine was recently successfully auctioned! Bidding obliges the buyer to pick it up on time by March 31, 2025! TECHNICAL DETAILS X-axis travel: 850 mm Y-axis travel: 700 mm Z-axis travel: 500 mm Control type: Heidenhain TNC 640 Rapid traverse linear X-Y-Z: 35 - 35 - 35 m/min Linear acceleration X-Y-Z: 6 m/s² Linear feed force X-Y-Z: 7,000 N Max. jaw width: 625 mm Workpiece dimensions Max. diameter: Ø 650 mm Max. height: 500 mm Interference circle (A-axis) in 0° position: Ø 885 mm Spindle data Speed: 15,000 rpm Power/torque: 20% duty cycle, 20 kW / 173 Nm Tool holder: SK 40 Tool interface Type: SK 40 Magazine positions: 38 pieces Chip-to-chip time: approx. 6 s Tool length: max. 300 mm Tool diameter with adjacent position occupied: Ø 80 mm Tool diameter without adjacent position occupied: Ø 125 mm Tool weight: max. 8 kg Magazine load: max. 152 kg Swivel rotary table Clamping surface: Ø 650 x 540 mm Centering hole: Ø 32 H7 Swivel range: +91° / -139° Drive type C axis: worm Speed of swivel axis A: 25 rpm Speed of rotary axis C: 30 rpm Table load One-sided drive: 600 kg Accuracy according to ISO 230-2 Deviation (A in X-Y-Z axis): ≤ 0.006 mm Cooling system (IKZ) Standard tank capacity: 122 l Cooling lubricant tank capacity: max. 570 l at 40 bar Pressure: max. 40 bar Flow rate: 11/27 l/min Mains connection (IKZ): 400 V / 50/60 Hz Power consumption (IKZ): up to 20 kVA Filter: police filter, paper belt filter Operating pressure Hydraulic pressure: 120 bar Compressed air: 6 bar Lubrication system: minimum quantity grease lubrication MACHINE DETAILS Control switch-on time: 24,403 h Machine switch-on time: 23,349 h Program run: 16,193 h Spindle time: 13,916 h Weight: approx. 9.5 t Isdpfev Hmdqjx Adija Mains connection Voltage: 400 V / 50/60 Hz Power consumption: up to 30 kVA EQUIPMENT - BLUM measuring probe - BLUM tool laser measurement - Extendable chip drawer - Swivel rotary table - Chip flushing gun - Emulsion mist extraction - Scraper belt conveyor - Blow-off device - Blowing air through the center of the spindle - Manual cabin door - Manual cabin roof - Polycarbonate safety windows - Electrical heat compensation from Heidenhain. - Electrical manual control module from Heidenhain.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, travel distance X-axis: 620 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 460 mm, rapid traverse X-axis: 48 m/min, rapid traverse Y-axis: 48 m/min, rapid traverse Z-axis: 48 m/min, controller manufacturer: Siemens, controller model: 840D SL, table load: 500 kg, rotary table diameter: 650 mm, spindle speed (max.): 12,000 rpm, coolant supply: 22 bar, 5-Axis Machining Center Manufacturer: Spinner Model: U5-620 Year of manufacture: 2014 Control: Siemens 840DE SL + ShopMill Operating hours: n/a Spindle hours: n/a S/N: XXXXX Technical specifications: ----- • Travel X-Y-Z: 620 x 520 x 460 mm • C-axis: 360° • B-axis: -90°/+110° • Swiveling rotary table Ø650(500) mm • Rotary table load capacity: max. 500 kg • Spindle speed: 12,000 rpm • Magazine: 32x SK-40 • Coolant system 22 bar incl. through-spindle coolant, bed flushing, paper band filter with 350L additional tank capacity • Direct optical measurement systems on rotary axes • Electronic thermal sensors for length expansion compensation of milling spindle • Option: Increased rapid traverse (48 m/min) • Option: Glass scales on X-Y-Z • Option: Fully enclosed machine (top) • Option: Sinumerik MDynamics • LED work area lighting • 3D wireless probe • Chip tray Isdpfjxqyugjx Adiea • Machine weight: approx. 7.5 t • Dimensions: 3,500 x 3,500 x 2,800 mm Accessories: ----- • Documentation • Rinse gun • Electronic handwheel • Work area extraction system Availability: December 2025

Condition: excellent (used), Year of construction: 2013, Spinner U5-620 vertical 5-axis machining center Year: 2013 Control Siemens 840D SL ShopMill Travels X 620 mm Y 520 mm Z 460 mm Min. distance between spindle and table 150 mm Max. distance between spindle and table 610 mm Isdpfsxlr Ubjx Adisa Feed/rapid traverse 32 m/min Table dimensions Ø 650 / 545 mm Max. Table load 500 kg Spindle max. speed 9000 U/min Tool holder SK40 Tool changer 24-positions Tool magazine Max. Tool length 290 mm Max. Tool weight 7 kg Dimensions and weight Dimensions 3.133 mm x 2.415 mm x 2.920 mm Weight ca. 7.500 kg Accessories/options: - complete documentation - swarf conveyor - SK40 tool holder 20 pieces, pull studs - coolant tank Low spindle hours. Very nice condition. Under power in our warehouse, possible to test it anytime!

Condition: used, Year of construction: 2009, x-travel 500 mm y-travel 250 mm z-travel 400 mm CNC-control Mitsubishi M70 Table dimensions Ø 250 mm max. table load 60 kg spindle taper HSK 63 spindle turning speed range 20 - 12.000 U/min spindle motor 7,5 kW feed range max. 10.000 mm/min rapid traverse 48 / 60 / 72 m/min tool change unit 24 Pos. coolant IKZ voltage 400 V c-axis 360 0 b-axis ° total power requirement 25 kW weight of the machine ca. 5,0 t dimensions of the machine ca. 1,90 x 2,70 x 2,85 m Isdpfx Aexq Hgiedisa chip conveyor 2,00 x 0,60 x 1,65 m coolant tank 1,60 x 1,20 x 0,60 m - Serial No.: RM10090 Axis CNC-Control (5-side machining with single clamping) – Internal coolant through spindle TSC – electronic hand wheel – Spindel oil chiller – working light – Central lubrication

Year of construction: 2018, condition: ready for operation (used), General Data Machine weight 2200 kg Control Unit Brand FANUC Model 31i-WB Movement Z-Axis Movement 255 mm Workpiece Workpiece weight 500 kg Iedsxy Araspfx Adiea Additional Equipment Optional Thin wire, Wire diameter [mm]: Ø 0.05 ~ Ø 0.30 Automatic front door UV axis travel [mm]: ± 60 × ± 60 Minimum step increment of the drives [mm]: 0.0001 This FANUC Robocut alpha-C400iB was manufactured in 2018. It features a maximum workpiece size of 730 x 630 x 250 mm and can handle weights up to 500 kg. The machine includes a FANUC 31i-WB controller and supports wire diameters from 0.10 to 0.30 mm. Consider the opportunity to buy this FANUC Robocut alpha-C400iB wire edm machine. Contact us for more information. Application Types EDM

Condition: ready for operation (used), Year of construction: 2018, operating hours: 6,000 h, Control Unit Brand HEIDENHAIN Model TNC 640 This 5-axis SPINNER VC 1650-5A-9 was manufactured in 2018, featuring a dynamic motor spindle up to 9,000 rpm, HIGH-TORQUE version, and Heidenhain TNC640 control. It includes a 360° rotary table, additional clamping table, and an automatic tool changer for 96 tools. Ideal for complex 5-axis simultaneous interpolation and precision machining. If you are looking to get high-quality milling capabilities consider the SPINNER VC 1650-5A-9 machine we have for sale. Contact us for more information. Isdpsxtq Uvefx Adiea Application Types Milling

Year of construction: 2012, condition: ready for operation (used), General Data Iodpfx Adexx Dzmjisa Machine weight 3950 kg Measurements height 2220 mm Measurements depth 2395 mm Dimensions Machine Length 2225 mm Main Drive Number of axis 5 Movement X-Axis Movement 400 mm Z-Axis Movement 250 mm Y-Axis Movement 300 mm This 5-axis Sodick AG 400 L wire EDM machine was manufactured in 2012. It features a work tank of 850 × 610 mm, supports a maximum workpiece weight of 500 kg, and offers extensive travel with X-axis at 400 mm, Y-axis at 300 mm, and Z-axis at 250 mm. Wire diameters range from 0.15 to 0.33 mm with a feed speed up to 420 mm/sec. Consider the opportunity to buy this Sodick AG 400 L wire EDM machine. Contact us for more information. Application Types EDM

Condition: new, Year of construction: 2025, Z-MaT U630 5-Axis Simultaneous Machining Center Siemens ONE, 15" LCD screen Dual-torque direct drive Travel (X/Y/Z): 750/800/600 mm Rapid traverse (X/Y/Z): 36/36/36 mm/min Cutting feed: 1-10,000 mm/min Spindle Spindle speed: 18,000 rpm, built-in Spindle taper: HSK63 (HSK100) Spindle motor: 30 kW, Siemens Air blast through the spindle Spindle air curtain Spindle oil cooler Double-arm tool changer, 30 tools (40/60/200 optional) Max. tool weight: 8 kg Max. tool length: 300 mm mm Max. tool Ø 75/120 Ijdpfjwku Evex Adiea Table Table diameter: Ø 630 mm Max. workpiece Ø 650 mm Max. table load: 850 kg T-slot (width x number x pitch): 18H8 x 7 x 80 mm Distance from spindle center to table surface: 120-720 mm A-axis travel (tilt): +-120 ° C-axis rotation: 360 degrees Max. rapid traverse A/C axes: 60/100 rpm A/C-axis encoder Standard accessories End of operation lamp 3-color status light Electric handwheel (MPG) Work area lighting Roller linear guides Automatic lubrication system (grease) 3-axis glass scales, air-operated (XYZ) Automatic Tool changer Air gun Coolant gun Coolant tank Coolant flushing system (chip flushing) Full splash guard Transformer: 400V, 50Hz Heat exchanger in the control cabinet Automatic shutdown Leveling bolts and blocks Tool box CE conformity Hinged belt chip conveyor Machine size and weight Machine dimensions (L x W x H): 2728 x 3760 x 3726 mm Machine weight: approx. 19,500 kg Subject to error and prior sale A wide range of automation options are available

Condition: new, Year of construction: 2025, functionality: fully functional, Aberlink's Halo CNC coordinate measuring machine (CMM) combines high precision with affordable metrology. It features a bridge design and belt drive for the X, Y and Z axes, making it ideal for use in inspection departments and on the shop floor. With travels of X 800 mm, Y 1000 or 1600 mm and Z 600 mm, the Halo CMM offers flexibility for various measurement requirements. The solid granite plate ensures high load-bearing capacity and stability. Isdpfxjvwa T Hj Adisa Thanks to the user-friendly Aberlink 3D measuring software, the training time is minimal, so that precise measurements can be taken even without prior knowledge. The volumetric accuracy is (2.1 + L/250)µm with the TP20 probe, (2.0 + L/250)µm with the TP200 probe and (1.8 + L/250)µm with the SP25M scanner. The scale resolution is 0.1µm. The Halo CMM is a cost-effective solution for precise measurements in various industrial applications.

Condition: good (used), Year of construction: 2015, operating hours: 50,871 h, functionality: fully functional, The machine is in good technical condition, fully functional, and still in operation. A test run is possible. Spindle replaced in 2021. Technical specifications: X axis 1,020 mm, Y axis 610 mm, Z axis 720 mm. Spindle speed: 12,000 rpm. Clamping area of the table: 1,200 × 600 mm. Max. table load approx. 1,000 kg. Spindle speed range: 40 – 10,000 rpm. Spindle power approx. 15 / 22 kW (short-term operation). Spindle taper ISO 40 / DIN 69871. Tool magazine: 30 positions. Rapid traverse (X/Y/Z): approx. 30 m/min. Control: HEIDENHAIN iTNC 530, electric motor with planetary gearbox. Machine weight approx. 8,000–9,000 kg. Machine dimensions (LxWxH): approx. 3,700 × 2,800 × 2,800 mm. Iedpexxmtfsfx Adija