Potato washing drum with platform

Zacmi

Condition: like new (used), functionality: fully functional, The can seamer is the machine used for hermetically sealing the lid to the can body prior to sterilization. Depending on the product, sterilization can also be carried out before filling. The sealing of the can is achieved by deforming and subsequently overlapping the metal layers of the can body and the lid through compression. The result is a kind of seam or hook between the two, which ensures a hermetic seal and, consequently, the tightness of the container. This sealing requires a rubber (sealing gasket) inserted into the rim of the lid to achieve the most effective bonding of the metal layers. Gjdpfsynkc Dex Af Toua Production output will depend on the type and product to be closed.

Condition: used, Year of construction: 1995, functionality: fully functional, power: 37 kW (50.31 HP), overall weight: 5,200 kg, Large chipper, ideal for pallets or similar. Built like a tank, weighs 5 tons. Rotor width 1300 mm. Motor 37 kW. Travel to rotor approx. 1.3 m. With discharge screw. Gusdpfx Aeu Apkisf Tsa

Condition: good (used), Telescopic filling machine Make: Zacmi Type: automatic 60 pocket rotating telescopic filling machine Capacity: up to 36.000 cans/hour Frame: stainless steel Direction: left-right Dimensions: L x W x H = 2.600 x 2.600 x 2.000 mm Weight: 1.500 Kg Power-Supply: 380 Volt + 50 Hz – 3 kW Compressed air: 6 Bar Features: in- and out-feed slat-band conveyor diversion plates revolving brush for removing product from top telescopes product height level control with proximity sensors height adaption with electric gear motor with dust roof Tooling: 67mm set Remark: without electric cabinet / control as-is Guodpoib A Idjfx Af Tsa or adjusted to customer needs

Condition: like new (used), SUITABLE FOR ALL TYPES OF PRODUCTS: green peas, green beans, spinach, carrots, okra, beans, strawberries, artichokes, sweet corn, broccoli, cauliflower, mushrooms, etc. WATER CONSUMPTION: 1.5 L water per 1 KG of product. STEAM CONSUMPTION: 1.5 L steam per 4-7 KG of product. The machine can operate in three modes: with water, with steam, or as a moisturizer (hydration). Hydration Blancher Version: In this configuration, the machine is suitable for completing the rapid rehydration process of cereals or legumes pre-started with the pre-heater. - Module 1 functions to treat the product with a water spray. - Modules 2, 4, and 6 work with steam. The temperature is controlled by a probe located in module 6, which regulates the modulating valve on the steam supply line to module 6, provided the pneumatic steam shut-off valve on module 2 is open. Godpfx Ajx S H U Sjf Teua - Modules 3 and 5 use cold atomized water. - Module 7 is designed as a water-to-air cooler. - Module 8 works with water, and its temperature does not exceed 14ºC to lower the temperature of the product. Water Blancher Version: In this configuration, the machine operates in counter-current, meaning the product moves in the opposite direction to the cooling water flow. The first seven modules are equipped with trays with rotary water recovery filters, as well as associated level controls and water recirculation pumps. - Modules 1, 2, and 3 function as pre-blanchers for the product. - Modules 4 and 5 are specifically designed for blanching with hot water. Water is recirculated by pumps, and temperature is regulated in module 4. - Module 6 acts as the first cooling module and is fitted with a by-pass pump for recirculating warm water, which is redirected to the 2nd or 3rd module; supply to the 3rd module is regulated by a solenoid valve. - Module 7 cools the product using a water mist and removes humid air with a fan. - Finally, module 8 further cools the product by spraying water above and below the conveyor net, with all water collected in module 8’s recovery tank. Steam Blancher Version: In this variant, the machine can steam-blanch vegetables across eight modules: - Module 1 serves as a barrier to prevent steam loss. - Modules 2, 3, 4, 5, and 6 operate on steam. The temperature is maintained by a probe in module 6, controlling the modulating valve on the steam supply line, provided the pneumatic steam shut-off valves are open. - Module 7 is designed for WATER-AIR cooling. - Module 8 is water-cooled, with the temperature not exceeding 14ºC to rapidly reduce the product temperature.

Condition: new, Year of construction: 2025, The XTON Smart Cleaner SC1000™ automatic basket washer is constructed from stainless steel AISI 304 and acid-resistant steel AISI 316. It is designed for use in various industrial and automotive applications. This washer is intended for degreasing and cleaning parts contaminated with oil or grease, without damaging the surface of the cleaned element. Cleaning efficiency is enhanced by our proprietary XPOWER Active Cleaner BA, which, combined with the appropriate temperature and pressure, easily removes all types of dirt. The machine operates in a closed-loop system at temperatures up to 80°C. Standard equipment includes a rotating basket with a diameter of 100 cm and a 300-liter tank, which can be optionally thermally insulated to protect the heated fluid from cooling too quickly. The Smart Cleaner SC1000™ ensures high cleaning quality, time and energy savings, as well as safe and convenient operation. It is designed for automatically removing dirt from cast iron, aluminum, and steel surfaces. The design and construction of the Smart Cleaner SC1000™ adhere to the highest quality standards ISO 9001 and environmental standards ISO 14001. EQUIPMENT: - Rotating basket with a diameter of 100 cm - Heated tank with a capacity of 300 liters - Dual liquid filtration system - Liquid level and temperature sensors Guedpfx Afju R Urhs Tja - Oil separator - Adjustable feet with a height adjustment range of 100 mm - XTON Active Cleaner BA (5L starter pack) TECHNICAL PARAMETERS: - Weight: 200 kg - External dimensions - Open chamber (W x D x H): 150 x 120 x 250 cm - External dimensions - Closed chamber (W x D x H): 150 x 120 x 140 cm - Rotating basket diameter: 100 cm - Rotating basket load capacity: 300 kg - Work time programming range: 0 - 99 min - Washing/liquid temperature: up to 80°C - Heater power: 9 kW - Tank capacity: 300 L - Tank capacity to oil separator level: 200 L - Pump capacity: 250 L/min - Spray pressure: 4.5 - 6 bar - Power supply: 3 x 400 V - Safety features: temperature sensor, emergency safety switch, limit switch - Safety rating: IP 54 - Declaration of conformity: CE

Condition: like new (used), It is suitable for direct filling of whole solid products of medium and large dimensions in cans, jars, plastic containers, etc. Products: peach halves, pear halves, whole peeled tomatoes, olives, cucumbers, carrots, apricots, artichoke hearts. - Production capacity will depend on the format and the product to be filled. Gjdexp Rqpspfx Af Tjua

Year of construction: 2025, condition: new, ProdMa Sp. z o. o. specializes in stainless steel processing and configures stainless steel machines according to the customer's requirements and capacities. Efficiency, high productivity, and good customer communication are our top priorities. Accordingly, we focus on existing machines on the market, analyzing and optimizing problem areas to ensure complete customer satisfaction. Here we offer the CB-80: Height: 2,000 mm Width: 1,120 mm Length: 4,890 mm Weight: approx. 800 kg Gedpfx Aferci U He Tsua Power: 50 Hz 360 V Power consumption: 1.64 kW Air pressure consumption: 1 m3/10 bar / 1 min. Peeling: 40 - 80 pieces / min Peeling diameter: 35 - 100 mm of unsorted onions

Condition: excellent (used), power: 1,700 kW (2,311.35 HP), The following LOOS brand steam boilers are the subject of the offer: LOOS U-ND 350 steam boiler Specification: - working pressure 1 bar - boiler control cabinet - oil burner - feed pump Gedouhm Erjpfx Af Teua Steam boiler LOOS U-HD 800 Specification: - working pressure 10 bar - boiler control cabinet - Weishaupt gas-oil burner - Grundfos CR feed pump - safety valve - feed water tank - chemical inhibitor tank with dosing pump Loos U-HD 1250 steam boiler Specification : - working pressure 16 bar - control cabinet - Weishaupt gas-oil burner - Grundfos feed pump

Condition: like new (used), Eillert C25 H Potato rumbler Stainless, 25Kg capacity, suitable for potatoes, carrots and other root veg, 3Ph Godpfxjhpqyke Af Tjua

Condition: used, Year of construction: 2023, functionality: fully functional, machine/vehicle number: PNG2 4302HEX - 2200399999, cooling capacity: 491 kW (667.57 HP), type of input current: three-phase, type of cooling: water, overall weight: 4,974 kg, ambient temperature (max.): 46 °C, ambient temperature (min.): -20 °C, input voltage: 400 V, pressure: 3 bar, temperature: 7 °C, volume flow: 84 m³/h, pump pressure: 1.8 bar, total width: 2,191 mm, total length: 4,449 mm, total height: 2,536 mm, warranty duration: 3 months, input frequency: 50 Hz, Equipment: type plate available, Process Chiller / Air-cooled Chiller Unit, Type: Phönix PNG2 4302 HEX (R513A) Manufacturer: MTA S.p.A. Gusdpfewzay Tjx Af Toa The Phönix PNG2 4302 HEX series are compact water chiller units designed for outdoor installation. Features include: - Shell-and-tube evaporator - Electronic expansion valves - Compressor shut-off valves - System with compressors and hydraulic sound insulation panels - Ambient operating temperature down to -20 °C - Buffer tank and twin P2 pump - Metal mesh protection filter for condenser coils (factory-installed) Cooling capacity (kW): 491 Chilled water temperature outlet/inlet (°C): 7 / 12 Flow rate (m³/h): 84 Available pump head (bar): 1.8 Ambient temperature (°C): 32 Refrigeration circuit: Refrigerant: R513A, GWP 631, safety class A1 Number of refrigeration circuits: 2 Number of compressors: 2 Capacity control (%): Variable from 12.5 to 100% Electrical data: Voltage (V): 400, Frequency (Hz): 50, Phases: 3 Maximum power input (kW): 235 Maximum current (A): 385 Starting current per circuit (A): 467 Protection rating: IP54 Dimensions: Length (mm): 4449, Width (mm): 2191, Height (mm): 2536 Weight (kg): 4974 Connection: Victaulic DN 125 Serial No.: 2200399999 Year of manufacture: 2023 Condition: Visual: 2, Technical: ok & tested Used Price: on request in Euro (plus VAT, ex Nettetal) – 3 months warranty On request, MTA offers a functional test of the chiller together with the buyer before collection at the Nettetal branch. Used machines may have visual defects due to prior use. (Technical specifications subject to change and prior sale reserved!) Location: MTA Deutschland GmbH, 41334 Nettetal