Condition: good (used), functionality: fully functional, Year of construction: 2007, 9000 seedlings, large pick-up attachment, rotary feeder, netting tie. Dcodpfx Akozr D Rbsrjk

Condition: used, Year of construction: 2004, gearing type: other, first registration: 01/2004, color: orange, mileage: 1,001 km, empty load weight: 1,785 kg, driver cabin: other, Vehicle location: Bovenden. Superstructure: Küpper-Weisser salt spreader STA95, approximately 5 m³, automatic control system with 2 chambers, fastening system with chains for mounting on a tipper, salt chambers covered with a tarpaulin, two conveyor augers, spreading angle adjustment, spreading rate adjustment, ladder on the rear left side, protective cover for the rear bumper. ACCESSORY INFORMATION IS WITHOUT GUARANTEE; subject to changes, prior sale, and errors! Dedpfx Akjzpfl Ijreck

Condition: used, Year of construction: 2005, gearing type: other, first registration: 01/2005, color: orange, mileage: 1,001 km, empty load weight: 1,690 kg, driver cabin: other, Vehicle location: Bovenden, Unladen weight approximately 1690 kg! Drive type: E2940HFS Dcjdpfx Aksy Tbg Serok ACCESSORY INFORMATION PROVIDED WITHOUT GUARANTEE, subject to change, prior sale and errors!

Condition: used, Year of construction: 2005, gearing type: other, first registration: 01/2005, color: orange, mileage: 1,001 km, empty load weight: 1,605 kg, driver cabin: other, Vehicle location: Bovenden, Dcedpfx Aot I Ugrekrjk Unladen weight approx. 1605kg! Dismantling of MAN LE 18.280 4x4 BB! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2022, operating hours: 930 h, fuel type: diesel, maximum speed: 40 km/h, color: green, For Sale: Claas Arion 610 Hexashift Stage V (CIS) Agricultural Tractor, Type A96 100 Dcsdpfx Akszmv Tworsk Year of manufacture: 2022 Operating hours: 939 hours The tractor is in excellent, like-new condition, has seen very little use, is fully operational, and is ready to work with no additional investment required. It is powered by a 6-cylinder John Deere DPS 6.8 L engine compliant with Stage V emissions standards (SCR, DPF, DOC, AdBlue). Maximum power: 145 HP Rated power: 135 HP Homologated power: 139 HP The tractor is equipped with a Hexashift 24/24 transmission (without creeper gears), featuring an electro-hydraulic shuttle and automatic powershift gear changes. Maximum speed is 40 km/h. It has 4WD, a differential lock, and a PROACTIV suspended front axle. The Load Sensing hydraulic system delivers 110 l/min and includes four rear hydraulic remotes (2 mechanical, 2 electro-hydraulic). Rear Category III three-point linkage and PTO speeds: 540 / 540 ECO / 1000 / 1000 ECO. The tractor does not have a front PTO. It is fitted with a Claas front linkage (front hitch) with a 3.0-ton lifting capacity and suspension. A reinforced loader frame is installed. The tractor comes with an ALO Quicke Q6M front loader featuring suspension, a quick coupler, Euro hitch, a bucket, and pallet forks. The cab is suspended and equipped with air conditioning, a pneumatic driver's seat, a CIS terminal with a color display, Bluetooth radio with hands-free function, and a full set of work lights. Standard roof (without sunroof). Tyres: Front: 480/70 R28 Mitas Rear: 580/70 R38 Mitas Both front and rear tyres are in very good condition. The tractor can be inspected and collected in Germany by prior appointment.

Condition: good (used), functionality: fully functional, Year of construction: 2001, working width: 1,650 mm, overall weight: 8,000 kg, rear tire size: 15/55-17, 48 cubic meters, 6 rakes, hydraulic drawbar, 7 blades. Dcedpfozrzd Sjx Akrok

Condition: good (used), functionality: fully functional, Year of construction: 1990, machine/vehicle number: TB321300601, Loading height: 1.80 m. Electrical controls. Dcodpeyfum Isfx Akrok

Condition: like new (used), functionality: fully functional, Year of construction: 2025, operating hours: 800 h, power: 5.5 kW (7.48 HP), first registration: 12/2025, color: grey, For sale is a Karl Barth AG "Ventomat" high-performance radial fan, type SE-1-100-4p, single-sided suction, sheet metal housing, painted, motor 5.5kW, 4-pole. Karl Barth AG (Dättlikon ZH) has been manufacturing these fans for over 50 years, and they are a well-known and highly regarded brand in Swiss agriculture, specifically for hay and biomass drying. The fan was used by us for approximately 4 months for ventilation/drying (hay and a drying container) and is in perfect working order. It was newly purchased in December 2025. Included in the scope of supply: - 1x Ventomat SE-1-100-4p fan, 4kW rated power, motor 5.5kW/4-pole, sheet metal painted, single-sided suction - 1x Invertek Optidrive E3 frequency inverter, 5.5kW, IP66/NEMA4X, factory configured, including maintenance switch and mounting base plate - 1x duct cone 222/563 to D400mm - 1x duct reducer D750/D600mm including flange ring D750mm - Additionally included free of charge: 1x flexible fabric hose Ø400mm, 10m length Technical data: Dsdpezrzizefx Akrock Parameter Value Manufacturer Karl Barth AG, Dättlikon (Switzerland) Type Ventomat SE-1-100-4p Rated power 4 kW Motor 5.5 kW, 4-pole Design sheet metal painted, single-sided suction Frequency inverter Invertek Optidrive E3, ODE-3-340140-3F4B, 5.5kW, IP66/NEMA4X FU input 380-480V, 3-phase, 50/60Hz, 17.2A FU output 0-480V, 3-phase, 14.0A, 7.5HP Duct connection 222/563mm to D400mm (cone), additionally D750/D600mm reducer Condition: Barely used (approximately 4 months in operation), technically flawless, fully functional. The new price (December 2025) was CHF 7870.00. Location: 6064 Kerns (self-collection).

Condition: used, Year of construction: 2019, gearing type: other, first registration: 01/2019, color: orange, mileage: 1,001 km, empty load weight: 980 kg, driver cabin: other, Vehicle location: Bovenden. Dedpfszn N S Aox Akreck Clearance width approximately 2725 mm at a 32-degree angle! ACCESSORY INFORMATION IS PROVIDED WITHOUT GUARANTEE; subject to changes, prior sale, and errors!

Condition: excellent (used), Year of construction: 2025, operating hours: 2 h, power: 51 kW (69.34 HP), motor manufacturer: Hyundai, front tire size: 300/70 R20, rear tire size: 420/85 R24, Equipment: air conditioning, Technical information Number of cylinders: 4 Front tyre size: 300/70 R20 Rear tyre size: 420/85 R24 Dcjdpfx Aozrry Djkrok Drive: Wheel Empty weight: 2.770 kg Condition Technical condition: very good Visual appearance: very good Other information Pto: 540/1000 Transport dimensions (LxWxH): Länge: 4.070 mm, Breite: 1.820, Höhe: 2.530 mm Additional information Please contact Tobias Mayr for more information = Additional options and accessories = - Front loader - Single wheels

Condition: new, High-performance forestry mulcher for excavators from 6 to 8 tons The BFM 80 was specifically developed for professional work in forestry, landscaping, and for clearing and maintenance operations. With its working width of 800 mm, the mulcher is ideal for shredding brush, shrubs, branches, and wood up to a diameter of approximately 200 mm. The large-sized rotor with 16 carbide tools, combined with the robust V-belt drive, ensures high shredding performance and smooth operation. Thanks to the reinforced steel construction, the BFM 80 is designed for daily use under demanding conditions and impresses with its long service life. Your advantages at a glance Suitable for excavators from 6 to 8 tons Dodpfx Aozqzq Nskreck 800 mm working width for precise and efficient work 16 carbide mulching tools with high wear resistance Shreds branches, brush, and wood up to approximately 200 mm in diameter Robust V-belt drive for reliable power transmission Three adjustable working depths for different applications Stable and durable steel construction for professional continuous use Technical data Model - BFM 80 Working width - 800 mm Suitable for excavators - 6–8 t Max. material diameter - approx. 200 mm Working depth - -70 mm / -30 mm / +10 mm Number of working depths - 3 positions Hydraulic connections - 1× supply, 1× return, 1× leak oil line Required hydraulic oil flow - 38–80 l/min Max. operating pressure - 250 bar Drive - V-belt Rotor shaft diameter - 219 mm Rotor diameter incl. tools - 465 mm Housing thickness - 8 mm Side wall thickness - 12 mm Tools - 16 carbide mulching blades Weight - approx. 450 kg

Condition: used, Year of construction: 2001, gearing type: other, first registration: 01/2001, color: orange, mileage: 1,001 km, driver cabin: other, Vehicle location: Bovenden Dsdpszn An Djfx Akrock Clearing width approx. 2700mm to 3000mm! Four-part snowplow blade, sprung, hydraulically pivoting, replaceable clearing edge. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Condition: used, Used truck tarpaulins already disassembled for pickup various sizes available in multiple quantities ##### Djdpfx Akeztiznjreck PLEASE CALL - NO EMAILS! ##### PICKUP ONLY, BY APPOINTMENT! #####

Condition: used, Year of construction: 1988, power: 53 kW (72.06 HP), _____IHC 754 XL, first owner, in excellent condition. Operating hours: approx. 8,600. Year of manufacture: 1988. Front three-point linkage. Front PTO. 30 km/h gearbox. Price: EUR 24,500.00 net. Location: null. Dcsdpszdmutsfx Akrok

Condition: used, Year of construction: 2015, operating hours: 6,800 h, power: 99 kW (134.60 HP), Equipment: air conditioning, all wheel drive, cabin, Well-maintained Fendt 313 Vario / SCR / TMS Good condition, see photos 6,800 hours First owner 19% VAT can be shown Net: €46,000 If you have any questions: Christian Hirsch Please try again later as we are often in a customer meeting. Please, no emails / Due to time constraints, emails can only be processed sporadically, thank you for your understanding! * Vario operation * Multifunction joystick with cruise control, engine speed memory, automatic functions, hydraulic control * Varioterminal 7-A with button operation * Variotronic headland management system * Vario TMS tractor management system * Cabin * Air conditioning * Continuous front windshield * Height and tilt adjustable steering column * Super comfort seat, air-suspended with backrest * Super comfort seat with seat heating * Passenger seat with automatic seatbelt * Particulate filter (aerosol) * Segmented windshield wipers front * Interior mirror * Work lights * Engine & Transmission * Reversing function, stop-and-go function * All-wheel drive / differential locks * Comfort control for all-wheel drive / differential lock * Rear / front differential with 100% lamellar lock and steering angle sensor * Load-sensing PTO shafts * Rear: Flange PTO shaft 540/540E/1,000 rpm * External control for rear PTO shaft * Hydraulic system * Electro-hydraulic rear lift (EHR) * 1st and 2nd hydraulic valves in the rear * Hydraulic valve controls cross control lever, UDK couplings rear * Front axle weight 60 kg * DL hydraulic system / 2-line system * Trailer hitch, height adjustable * Roof white * Body paint in RAL color * Rim paint on request * Heated rear window * Ventilation * Air conditioning * Super comfort seat, air-suspended * Cabin floor mat * Steering wheel incl. rotary handle * Accessory bracket * Terminal bracket * Mirror bracket * Rearview mirror * Cabin suspension mechanical * Work lights roof front TWINPOWER * Work lights fender * Work lights roof rear TWINPOWER * VARIO TMS C267 * Rotating beacon Dcedpfsvn D E Ujx Akrek * Body color RAL 1032 * Rim color RAL 9006 white aluminum * 40 km/h version * PTO speed 540/540E/1,000 rpm * Double-acting hydraulic valve front, 1/1 center right + rear * Additional valve 1/2 rear * Additional valve 1/3 rear * Return flow center right * Upper link CAT 2 (not available) * Fuel pre-filter, heated * Tires: 360/80 R24 138D NO 30 8 W12X24 * Tires: 440/80 R34 155D NO 112 8 DW15L * Tread depth ~ 90% * 1820 mm front track * 1800 mm rear track If you have any questions: Christian Hirsch If you have any questions: Christian Hirsch Please try again later as we are often in a customer meeting. More offers can be found at: Equipment details were determined using a VIN query; technical errors may occur. Information provided online is a non-binding description. It does not constitute guaranteed characteristics. The seller is not liable for typing and data transmission errors / changes / input errors. Errors and prior sale subject to change.

Condition: new, Year of construction: 2023, For inquiries regarding the attachment, please contact Mr. Herden (available by phone at [phone number]). Seppi M. BMS 125 forestry mulcher / DEMO unit / Year of manufacture: 2023 / in stock & immediately available Price: €28,290.00 net / €33,665.10 gross - Working width: 1.25 m - Overall width: 1.56 m - Depth: 1.11 m - Height: 0.85 m - Mulcher for excavator attachment - Ideal for mulching in hard-to-reach areas such as roadsides, riverbanks, steep slopes, or for clearing gas and power lines - Mulches bushes and wood up to 30 cm in diameter - For excavators from 13 to 30 tons - For mounting on various attachment plates - Drive designed for hydraulic motor, depending on the flow rate of the carrier machine - Indirect V-belt drive with 5 V-belts - Reinforced double-walled housing made of wear-resistant AR 400 steel - Forged counter blades - Hydraulically adjustable rear hood - Continuous hinge over the entire hood length - Front protection with chains - Rear protection with chains - Support skids in sandwich construction, height-adjustable, reinforced with a carbide plate - Color: red RAL3020 · anthracite RAL7021 OPT 468 rotor with fixed tools with inserts made of tungsten carbide - 1 x MONO EXTREME V-LOCK L, part number 19702266 - 33 x MONO TIP V-LOCK, part number 19702259 - 1 x MONO EXTREME V-LOCK R, part number 19702267 - Wear-resistant tool holder - Interchangeable rotor stub shafts OPT 465 M-BOOST bevel gear piston motor - With automatic displacement regulation 60-80 cm³ and overpressure valve - Displacement in cm³ (min-max): 60 - 80 - Required hydraulic pressure in bar (min-max): 200 - 350 - Required hydraulic flow rate: 80 - 170 l/min 3 hydraulic lines are required: feed, return, and drainage. The unit is supplied without hoses, fittings, and attachment plate. Many more adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) are in stock and immediately available. We have a very large selection of various Seppi M. products in our warehouse, which are immediately available! Mr. Herden (Tel. [phone number]) will be happy to assist you. Upon request, we will also be happy to provide you with a financing offer. We are an official DMS sales and service partner. We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. Dcjdpoznrvqjfx Akrjk We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. We are an official Seppi M. sales and service partner. We are an official Magni telehandler sales and service partner. We are an official JCB construction equipment sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Seppi M. product range for you! Errors and prior sale excepted! Please contact Marius Herden for further information.

Condition: new, Year of construction: 2023, working width: 105,000 mm, Seppi M. H3 105 flail mower / DEMO unit / Year of manufacture: 2023 / incl. MS03 adapter plate / in stock & immediately available Price: €10,790.00 net / €12,840.10 gross - Working width: 105 cm - Overall width: 117 cm - Depth: 80 cm - Height: 66 cm - Weight: 217 kg - Mowing head for attachment to a hydraulic arm - mulches grass and bushes up to 3 cm in diameter - for excavators from 2 to 5 tons - for mounting on various adapter plates - floating mounting (parallelogram linkage) - indirect V-belt drive with 3 V-belts - Drive designed for hydraulic motor depending on the Dedpfxsznrp De Akreck flow rate of the carrier machine - Housing made of wear-resistant AR400 steel - Front protection with chains - Rear protection made of rubber - Reinforced support roller with double tapered roller bearing, height adjustable - Color: red RAL3020 · anthracite RAL7021 OPT 039 Rotor with SMW flail (standard) - 9 pieces, part number 150.02.041 OPT 429 Hydraulic gear motor 17cm³ - with flow control valve and motor safety valve DRAIN SAFE TM protects the motor in case of incorrect use - Required hydraulic pressure in bar (min-max): 150 - 250 - Required hydraulic flow rate in l/min (min-max): 35 - 60 OPT 529 DRAINLESS system with pressure accumulator (NO leak oil line needed!) - including hoses and check valve OPT 372 hydr. 190° swivel device 2 hydraulic lines are required: supply and return. No leak oil! Additionally, a hydraulic circuit is required for the swivel ring. The unit is supplied without hoses and connections. Many more adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) are in stock and immediately available. We have a very large selection of various Seppi M. products in our warehouse that are immediately available! Please contact us for this at . On request, we will also be happy to provide you with a financing offer. We are an official Seppi M. sales and service partner. We are an official Magni telescopic handler sales and service partner. We are an official DMS sales and service partner. We are an official Westtech sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. We are an official Holp sales and service partner. We are an official OilQuick sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Seppi M. range for you! Errors and prior sale excepted! = Further information = Please contact Marius Herden for further information.

Condition: used, Year of construction: 2021, operating hours: 1,120 h, power: 53 kW (72.06 HP), Equipment: all wheel drive, front linkage, * German-made machine, first owner, in very good condition * TABMC040VK5115005 * Full service history * Road approval, 40 km/h Dcsdpfxsy Ubguj Akrok * 4x4 all-wheel drive * Year of manufacture: 2021 * Operating weight: 6,200 kg * Tires: 340/85 R24 (front), 420/85 R34 (rear), approximately 80% tread * * I would be happy to send you a video via WhatsApp * WhatsApp: * Polish contact: [Phone number] * Sale only to businesses, no warranty, all information without guarantee, subject to prior sale.

Condition: used, Year of construction: 1989, color: red, Applicable material: Hay Dcjdpsziplrsfx Akrjk Bale width: 1200 Bale height: 900

Condition: ready for operation (used), Year of construction: 1987, A Hoes drainage trencher for laying drainage pipes and trenches for subsurface drainage is available. Engine: Deutz F 8 L 413 F, Power: 157kW, Torque (1500rpm): 760Nm, Fuel tank capacity: 435l, Oil tank capacity: 125l, Max. working/travel speed: 2400m/min/4750m/min, Track length: 4900mm, Track gauge: 2120mm, Track shoe width: 550mm, Specific ground pressure: approx. 0.26kp/cm², Max. trenching chain speed: 5.69m/s, Chain tensile strength: 640kN, Chain pitch: 100mm, Max. trench width: 290mm, Max. trench depth: 1850mm. Machine dimensions X/Y/Z: approx. 9650mm/2700mm/3400mm, Weight: approx. 13500kg, Operating hours: approx. 8470h. The machine is equipped with a laser guidance system. Includes many spare parts. Documentation available. An on-site inspection is possible. Djdpfx Aksznmzbsrsck

Condition: used, Heizkessel / Boiler Viessmann Paromat-Triplex RN with Ölbrenner / Oil burner -weishaupt- WL40Z-A Baujahr / Year 2015! Dedsxc Ipcjpfx Akrock Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: new, functionality: fully functional, Year of construction: 2026, High-performance forestry mulcher for excavators from 9 to 13 tons The Brugger BFM 100 was developed for demanding tasks in forestry, landscaping, and for clearing and maintenance work. Thanks to its working width of 1,000 mm, it efficiently shreds brush, shrubs, branches, and wood up to a diameter of approximately 250 mm. The large-sized rotor with 16 carbide-tipped tools, in combination with the powerful V-belt drive, ensures smooth operation and high area performance. The reinforced steel housing is designed for daily professional use and reliably withstands high loads. Your advantages at a glance: Suitable for excavators from 9 to 13 tons 1,000 mm working width for efficient operation 16 carbide-tipped mulching tools with high wear resistance Shreds branches, bushes, and wood up to approximately 250 mm in diameter Robust V-belt drive for reliable power transmission Three adjustable working depths for different applications Stable and durable steel construction for professional continuous use Technical data Model - BFM 100 Working width - 1,000 mm Suitable for excavators - 9–13 t Max. material diameter - approx. 250 mm Working depth - -70 mm / -30 mm / +10 mm Hydraulic connections - 1× supply, 1× return, 1× leak oil line Dodpfx Akozqthtsrock Required hydraulic oil flow - 90–130 l/min Max. operating pressure - 250 bar Drive - V-belt Rotor shaft diameter - 168 mm Rotor shaft material thickness - 20 mm Rotor diameter incl. tools - 416 mm Housing thickness - 8 mm Side wall thickness - 12 mm Tools - 16 carbide-tipped mulching blades Weight - approx. 760 kg ----- For customers with a valid VAT ID number, a net invoice will be issued. Contact us for a customized offer! PLEASE NOTE THAT OUR COMPANY HEADQUARTERS IS LOCATED IN 39030 GAIS, SOUTH TYROL (not in Mittenwald).

Condition: used, Year of construction: 2023, _____Eckart Lupus 191+ Tanker: Tank body made of polyester laminate with a capacity of 19,100 liters. Gelcoat coating/UV-resistant. Baffles, wheel cutout, maintenance hatch on top of the tank, 600x600mm. SLE system for increasing the support load, automatic operation. BPW tandem bogie. AgroTurn axle steering. Air brake system, automatic load-dependent brake control. Tires: 750/60R30.5 Vredestein flotation tires. Hydraulic drawbar suspension. K80 electric forced steering with K50. Lubrication strip TDAS. Support leg reinforcement. Reinforced frame. 4-point lifting mechanism. Eccentric screw pump, 6,000 l/min. Reduction gearbox, switchable for 540 & 1000 rpm. Automatic filling shut-off. Stone trap. Vogelsang Rotacut front-mounted shredder. 2x plate valves. Suction arm 8" Central. Turbo filler. Full LED lighting. Isobus control. Electronic application rate dosing. CCI-800 operator terminal. Application rate display. Load sensing control block with separate oil filter. 40 km/h. Reversing camera. Mounting frame Vogelsang BlackBirg. Vogelsang 15m trailing shoe distributor. 60 hose outlets with 25cm hose spacing, 1.5m driving protection on each side. Partial width control left/right, hydraulic. Hydraulic transport lock. Price: 145,000.00 Euro net, storage location: null. Dcodozk A Nyspfx Akrjk

Condition: used, Year of construction: 2015, operating hours: 1,800 h, power: 99 kW (134.60 HP), Equipment: air conditioning, all wheel drive, cabin, VAT can be shown: Net selling price: €72,500 Well-maintained Fendt 313 Vario / SCR with original 1,800 operating hours. Very good condition. 1800 hours First owner 19% VAT can be shown If you have any questions: Christian Hirsch Please try again later as we are often in a customer meeting. * Vario control * Multifunction joystick with cruise control, engine speed memory, automatic functions, hydraulic control * Varioterminal 7-A with button operation * Variotronic headland management system * Vario TMS tractor management system * Cabin * Air conditioning * One-piece windshield * Height and tilt adjustable steering column * Super comfort seat, air-suspended with backrest * Super comfort seat with seat heating * Co-driver's seat with automatic seatbelt * Particle filter (aerosol) * Segment windshield wiper at the front * Interior mirror * Work lights * Engine & transmission * Reversible shuttle function, stop-and-go function * All-wheel drive / differential locks * Comfort control for all-wheel drive / differential lock * Rear / front differential with 100% lamella lock and steering angle sensor * Load-sensing PTO shafts * Rear: Flange PTO shaft 540/540E/1,000 rpm * External control of the rear PTO shaft * Hydraulic system * Electro-hydraulic rear lift (EHR) * 1st and 2nd hydraulic valve at the rear * Hydraulic valve controls, cross lever, UDK couplings at the rear * Front weight 60kg * DL hydraulic system / 2-line system * Tow hitch, height-adjustable * Roof, white * Paintwork of superstructure in RAL color * Paintwork of rims on request * Heated rear window * Ventilation * Air conditioning * Super comfort seat, air-suspended Dedpfx Akjy I Hz Rsrock * Floor mat, cabin * Steering wheel including rotary grip * Additional equipment bracket * Terminal bracket * Mirror bracket * Rear view mirror * Cabin suspension, mechanical * Work lights, roof front TWINPOWER * Work lights, fender * Work lights, roof rear TWINPOWER * VARIO TMS C267 * Rotating beacon * Color of superstructure RAL 1032 * Color of rims RAL 9006 White aluminum * 40 km/h version * PTO speed 540/540E/1,000 rpm * Rear PTO, single-acting, one valve, center right + rear * Additional valve, single-acting 1/2, rear * Additional valve, single-acting 1/3, rear * Return line, center right * Top link, category 2 (not included) * Fuel pre-filter, heated * Tires: 360/80 R24 138D NO 30 8 W12X24 * Tires: 440/80 R34 155D NO 112 8 DW15L * Tread depth ~90% * Front track 1820 mm * Rear track 1800 mm If you have any questions: Christian Hirsch If you have any questions: Christian Hirsch Please try again later as we are often in a customer meeting. Trailer available on request (see last photo, Swopper converter). More offers at: The equipment was determined with the help of a VIN query, errors may occur for technical reasons. Information provided on the internet are non-binding descriptions. They do not constitute guaranteed characteristics. The seller is not liable for typing and data transmission errors / changes / input errors. Errors / prior sale reserved.

Condition: used, Year of construction: 2021, _____Fendt 4-rotor hay tedder, model 12545 Year of manufacture: 2021 Mechanical operation Dcsdpfxezknxto Akrek No Isobus Low operating hours Immediately ready for use Price: 29,000.00 Euro (net) 34,510.00 Euro (including 19% VAT) Location: null