Used Bale presses for sale (213)

Condition: good (used), Bramidan B 20 baler Bale dimensions - WxDxH (mm) 1200 x 800 x 800 Feed opening WxH (mm) 1200 x 480 Pressure force 20 tons Engine (kW) 4.0 Cycle time (s) 36 / 21 Baler dimensions WxDxH (mm) 1775 x 1030 x 2790 Weight (kg) 1250 Stroke (mm) 750 Number of ties 4 Year 2014 - 2016 Bramidan X30 year 2017 price 5500eur Crjb E Sev Aku Sohbxsb Bale dimensions - WxDxH (mm) 1200 x 800 x 1000 mm Feed opening WxH (mm) 1090 x 655mm Pressure 30 tons Engine (kW) 4.0 Cycle time (s) 36 / 21 Baler dimensions WxDxH (mm) 1675 x 1030 x 2300 Weight (kg) 1600 Number of ties 4 BALE WEIGHT Cardboard (kg) : 275-350 Plastic film (kg) : 325-425

Year of construction: 2003, operating hours: 43,000 h, Condition: repair required (used), machine/vehicle number: HBC 140 2x75kW 2003 (W230-005), Sold by Bollegraaf Recycling Solutions, the original manufacturer of this Bollegraaf baler and conveyor: Bollegraaf HBC140s Baler (2x75kW). Baler: Weight: 47.100 kg Construction year: 2003 Hardox bottom floor plate only Plastic valve Anti-rat cabling Hours 43.000 This baler can also be sold fully refurbished according to the 'Bollegraaf OEM Certified Refurbishment standards'. This includes 2 year guarrantee. Contact us for more information or a quotation. General principles of refurbishment Creb E Shbskcgynsxeb Cleaning & disassembly Before the actual refurbishment takes place the baler is completely cleaned and disassembled in our refurbishment workshop. Tolerances After the disassembly the tolerances of all steel components are measured and re-welded where necessary, this at least applies to the following components; • Ram, • Frame, • Channel, • Pre-press-flap After disassembly and inspection the ram is welded-up again and fitted with new ram wheels. The protective grids and the pre-press flap are made dent-free and repaired where necessary. Repainted After measuring the tolerances and any repair- and welding work, all components are being blasted and coated again. Hydraulics: The hydraulic tank is cleaned. The hydraulic lines & hoses are replaced. The hydraulic components are repackaged. The hydraulic oil is replaced. Cabling: All cabling is checked and replaced if necessary. All junction boxes are replaced and placed back in easily accessible positions. Wear parts: All wearing parts are replaced. The pins and shafts of the cylinders and the channel are replaced with new ones. All wearing parts of (both) needle installations and knotters are replaced for new. Cylinders: The cylinders are repackaged and, if necessary, provided with a new chrome layer or a new cylinder rod. MCC Cabinet The switch box is checked and cleaned. If necessary, electronic components are replaced with new ones. The PLC and HMI (human interface) are replaced with the latest Schneider M340 version including the latest software.

Condition: excellent (used), Year of construction: 2014, operating hours: 37,656 h, Functionality: fully functional, pressing force: 85 t, bale weight: 650 kg, filling opening width: 1,500 mm, filling opening length: 1,100 mm, bale height: 750 mm, bale width: 1,100 mm, overall weight: 25,000 kg, oil tank capacity: 1,000 l, year of last overhaul: 2024, volume flow: 410 m³/h, transport width: 2,400 mm, transport length: 9,300 mm, Hello, We are offering you a used baler from the manufacturer Presona AB, type LP 85 VH1, subject to availability. The following technical data was taken from the manufacturer's operating instructions and brochures, for which we cannot guarantee their accuracy or completeness. Manufacturer: Presona AB, Sweden Type: LP 85 VH1 Year of manufacture: 2014 Total operating hours: 37,565 hours, as of March 2025 Main press force: 85 t Specific press force: 100 N/cm² Pre-press flap force: 28 t Feed chute dimensions: 1,500 x 1,100 mm Filling volume per press cycle: 2.7 m³ Throughput under operating conditions: 410 m³/hour Bale dimensions: 1,100 x 750 mm Drive power: 55 kW Tying system: 5-fold vertical Hydraulic oil tank volume: 1,000 L Press dimensions: 10,350 x 2,400 x 3,150 mm (L x W x H) Press weight: approx. 25 t Note: The machine was used for compaction at a recycling plant. Used for the production of paper, cardboard, films, and plastics such as bottles, buckets, canisters, and drums. The press is in good condition. Many wear parts and entire assemblies have been replaced over the past three years. The machine has been regularly serviced. We would be pleased if this press is of interest to you. Cjb E Sev T I Evehbxerb Your service team at Mertens & Frowein GmbH

Condition: used, Year of construction: 1997, Technical specifications of horizontal automatic Press Model Konti 275 D Manufacturer: PAAL, Germany Csb E Shsv Svkkobxsrb Press force: 75t Channel cross-section 75x110 cm. Feed opening 102x155 cm. Filling volume approx. 2.0 m3 Binding vertically 5 wires Drive power 45 kW Material throughput • Density 35 kg/m3 9.5 tonnes/hour. • Density 60 kg/m3 16.5 tonnes/hour. • Density 100 kg/m3 26 tonnes/hour. Bale weight from 500 to 750 kg. Adjustable bale length Bale size (WxH) 75 x 1100 mm Press weight 25 tonnes Press dimensions see brochure Year of manufacture 1997. Operating hours, approx. 40,000 hours

Condition: used, Year of construction: 2004, Technical details: pressure: 58 t box depth: 1145 mm material: Papier/Pappe/Kartonage/Plastik/Blechdosen/PET Flaschen bottles Feed opening: L: 1145 x B: 600 mm voltage: 400V / 50 V / Hz total power requirement: 4,0 kW weight of the machine ca.: 2,6 t machine dimensions LxWxH: ca. 1,07 x 1,84 x 3,1 m Anwendung: Papier/Pappe/Kartonage/Plastik/Blechdosen/PET Flaschen platzsparende Recycling Lösung kompakte Bauart automatische Pressplattenrückführung, dadurch erhöhter Bedienkomfort Öffnung an der Vorderfront Tür horizontal verschiebbar ca. 600mm Presskammer/Ballengröße: LxBxH: 1000 x 600 x 600 mm (0,36 m³) Bindeeinheit Band- und/oder Drahtabbindung Creb E Shbsu U A E Usxsb Bedienung über Schalttafel *

Condition: reconditioned (used), Year of construction: 2004, Functionality: fully functional, machine/vehicle number: 610.01.022, pressing force: 59 t, bale weight: 350 kg, filling opening width: 1,190 mm, filling opening length: 600 mm, bale length: 1,180 mm, total width: 1,059 mm, total height: 2,871 mm, total length: 1,838 mm, type of input current: three-phase, bale height: 800 mm, bale width: 700 mm, input voltage: 400 V, overall weight: 2,300 kg, warranty duration: 6 months, input current: 16 A, transport height: 2,050 mm, power: 4 kW (5.44 HP), year of last overhaul: 2024, transport width: 1,059 mm, transport length: 1,838 mm, type of motor: three-phase motor, nominal current: 16 A, protection type (IP code): IP54, input frequency: 50 Hz, cylinder stroke: 890 mm, Equipment: documentation/manual, Brand: Strautmann Umwelttechnik GmbH The stated price is exclusive of VAT, ex works, and excluding packaging. The press has been cleaned, function-tested, repaired, and equipped with a new control system in accordance with EN16500. All spare parts used are genuine Strautmann parts. Csb E Shbsv Rzwmjxsrb Technical Details: Manufacturer: Strautmann Umwelttechnik Type: PP 1207 Bale Size (L x W x H): 1180 x 700 x 800 mm External Dimensions (L x W x H): 1838 x 1059 x 2871 mm Transport Height: 2050 mm Filling Opening: 1190 x 600 mm Baling Pressure: 59 t / 580 kN Throughput: 1 - 2 bales / hour Number of Belt Channels: 4 Baler Weight: 2,300 kg Power Supply: 400 V / 50 Hz Power Consumption: 4 kW Installation Location: Indoors / Outdoors, Covered Includes Bale Belt Starter Set, 19 mm Serial Number: 610.01.022 Year of Manufacture: 2004

Condition: ready for operation (used), DIXI 60SLD is a semi-automatic pressing system with a pressing force of 60 tons, designed for economical reduction of the volume of (recyclable) waste in industry and crafts: Cardboard boxes Foams PET bottles Insulating mats and other pressed materials. Horizontal baler, waste press DIXI 60 SLD with tipper Technical specifications: Pressure:, 60 tons, Unit pressure:, 6.81 kg/cm², Power supply:, 400V / 7.5kW Csb E Ssra A E Ushbxjrb Beam dimensions:, 800x1100x1200 mm, Number of ties:, 3 Beam weight:, approx. 370-410 kg, Tie:, manual Loading opening:, 990 x 1110 mm, Machine weight:, 5420 kg Average pressing cycle:, 47 sec Year of production:, 2011-2016

Year of construction: 2008, operating hours: 40,000 h, Condition: good (used), machine/vehicle number: HBC 140 2x75kW 2008 (00191), Sold by Bollegraaf Recycling Solutions, the original manufacturer of this Bollegraaf baler and conveyor: Crob Eokcgf Hs Shbxob Bollegraaf HBC140s Baler (2x75kW). Baler: Weight: 47.100 kg Construction year: 2008 Hardox bottom floor plate only Variable channel pressure control Plastic valve Hydraulic pump driven by frequency inverter Anti-rat cabling Oil in-depth filtration Modem Hours 40.000 This baler can also be sold fully refurbished according to the 'Bollegraaf OEM Certified Refurbishment standards'. This includes 2 year guarrantee. Contact us for more information or a quotation. General principles of refurbishment Cleaning & disassembly Before the actual refurbishment takes place the baler is completely cleaned and disassembled in our refurbishment workshop. Tolerances After the disassembly the tolerances of all steel components are measured and re-welded where necessary, this at least applies to the following components; • Ram, • Frame, • Channel, • Pre-press-flap After disassembly and inspection the ram is welded-up again and fitted with new ram wheels. The protective grids and the pre-press flap are made dent-free and repaired where necessary. Repainted After measuring the tolerances and any repair- and welding work, all components are being blasted and coated again. Hydraulics: The hydraulic tank is cleaned. The hydraulic lines & hoses are replaced. The hydraulic components are repackaged. The hydraulic oil is replaced. Cabling: All cabling is checked and replaced if necessary. All junction boxes are replaced and placed back in easily accessible positions. Wear parts: All wearing parts are replaced. The pins and shafts of the cylinders and the channel are replaced with new ones. All wearing parts of (both) needle installations and knotters are replaced for new. Cylinders: The cylinders are repackaged and, if necessary, provided with a new chrome layer or a new cylinder rod. MCC Cabinet The switch box is checked and cleaned. If necessary, electronic components are replaced with new ones. The PLC and HMI (human interface) are replaced with the latest Schneider M340 version including the latest software.

Condition: good (used), Year of construction: 2008, Garbage compactor, garbage compactor, press container, garbage container, self-compacting container, mobile waste compactor, paper compactor, paper container, baler, paper press, waste compactor, garbage press, vertical baler -Manufacturer: Papenbrock, vertical baler K 800 with bale wagon -Interior: 830x600xH1180 mm -Pressing process: Press piston Creb Eeud Dvgs Shbxeb -Knotting: with strapping band -Transport dimensions: 1090/760/H2380 mm -Weight: 470 kg

Condition: good (used), Year of construction: 2013, Functionality: fully functional, pressing force: 42 t, bale weight: 400 kg, HSM VK 4212 Year of production: 2013 Fully automatic press. After a major service, the device was installed with new and fully refurbished most important elements of the press. The machine was also painted. Crush force: 420 kN Unit pressure force: 75 N/cm² Drive power: 22 kW Voltage/frequency: 400V/50Hz Efficiency at 50 kg/m³: 9.05 t/h Bale width x height x length: 700 x 800 x 600-1200 mm Length x width x total height: 7378 x 2882 x 2030 mm Machine weight: 6.3 t Pressed material: foil, mixed paper, cardboard, die cutting machine waste Bale tying: 4-fold with wire We also have other presses in stock. Transport costs depend on weight, volume and, above all, distance, the following information is important for inquiries: Delivery address (postal code and city name), but further details require telephone contact, so please inquire about transport costs and other delivery methods to contact us contact us by phone. Our contact details can be found in the seller's legal information. Crjb E Shbewdtr Ijxsb We sell and export worldwide, and thanks to our very large storage capacity we can also deliver larger quantities flexibly and quickly. We issue intra-Community invoices - without VAT. opening hours Mon-Fri: 8:00-16:00 Sat: closed

Condition: used, Year of construction: 2020, Functionality: fully functional, EP 120 V Equipment: - Torsion-resistant press box with replaceable floor wear plates - Press piston in heavy design with height-adjustable stable rollers (thus adjustable knife gap) - Pre-installed inclined knife, thus higher cutting forces and a shock-free cutting mechanism - Knife fastening using an innovative screw system and thus easy knife replacement possible - Counter knife system with large cutting clearance angle and optimal cutting geometry - Drive of the needle carriage unit via a robust chain and side guide mounted on rollers (everything adjustable) - Two individually mounted retaining teeth on each press frame side (material expansion in the press shaft is thus avoided) - Extremely stable channel adjustment with oversized adjustment cylinder Crsb Eov Imldj Shbxeb - Menu-controlled material selection with type and bale length preselection - Control cabinet with manual controls and touch panel with simple operating instructions - Demand switching of the main pumps for energy-efficient Pressing operation - All required safety standards and safety locks Technical data: - Pressing force of 120 tons - Length of the channel baler: approx. 12,700 mm - Height of the channel baler: approx. 3,600/4,300 mm - Weight of the channel baler: 32 t - Filling opening: 1,000 mm x 2,000 mm - Channel cross-section: 750 mm x 1,100 mm - Bale weight: 600 - 900 KG - Bale format: H=750 mm x W=1,100 mm - Pressing force of the press ram: 120 t - Pressing power: Main pump drive: 2 x 55 kW // Oil tank volume: 2,720 liters - Noise reduction hydraulic unit: Sound pressure level - Automatic 5-fold vertical bale strapping for wire thicknesses from 2.8 mm to 3.8mm - Piston slide principle: needle slot cover - Wear-resistant Hardox base plate in screwed design - Horizontal cylinder bracket: This counteracts misalignments of the press plate due to wear - Articulated bearing on the cylinder piston - Rails of the press plate Hardox screwable and replaceable - Adjustable rollers of the press plate - Path-distance measuring system integrated in the cylinder, optimal position detection of the press ram - Hydraulic oil

Condition: used, pressure 4,0 t Csb E Ssv Irinehbxorb box opening 600 x 500 mm box depth 550 mm total power requirement 1,5 kW weight of the machine ca. 0,35 t dimensions of the machine ca. 0,77 x 0,95 x 1,45 m Press cycle 14 sec. Bale weight box approx. 25 kg Bale weight of film approx. 50 kg

Condition: ready for operation (used), Year of construction: 2003, Baling press Hsm 500.2 vl Four-fold bale tying with wire Crjb E Shera Ak Eebxjb Bale dimensions: L x W x H (mm): 1200 x 800 x 1000 - 1200 Bale weight (kg): approx. 500 kg Technical data: L x W x H (mm): 1213 x 1824 x 2987 Loading opening (mm): 1200 x 565 Cycle (sec): 35 Compressive force (T): 54 Power supply (V): 400 (three phases) Year of manufacture 2002-2005 Baling press Hsm V press 500.2 VL Year of manufacture 2006-2008 price 3600eur Transport height: 2600 mm

Condition: excellent (used), Year of construction: 2012, Tested, cleanded, full service was made. New oil. We have two Orwak 5030 balers. Last photo - green, refurbished 2017 - 2000 Eur. Crjb E Shborxfn Uoxsb

Condition: like new (used), Year of construction: 2020, operating hours: 1 h, Functionality: fully functional, Manufacturer: Bramidan Creb E Shbjvftuysxsb Type: Vertical raw material press B20 Year of construction: 2018 Condition: Very good Available from: Immediately Location: 48282 Emsdetten Price: 8.800 € net Technical details: Pressing force: 20 t Bale size (WxDxH): 1200 x 800 x 800 mm Bale weight: Cardboard: 200-250 kg Plastic film: 250-300 kg Filling opening (WxH): 1200 x 480 mm Dimensions (WxDxH): 1775 x 1030 x 2790 mm Transport height: 2.58 m Weight: 1,250 kg Lift: 750 mm Number of tie-downs: 4 Type of strapping: belt Power supply: 3x400V, 50Hz, 16A Motor power: 4.0 kW Cycle time: 36/21 seconds (average) Noise level: 62-64 dB Special features: Easy handling: -Automatic bale ejection -Easy bale strapping High efficiency: -Short cycle times thanks to high-speed technology -Stackable bales - up to 900 kg per pallet (can be stacked 2 or 3 high) Suitable for: Dry and soft recyclable materials such as cardboard, paper, cardboard packaging (PPK) and film If you are interested or require further information, please contact me.

Condition: excellent (used), Year of construction: 2014, Functionality: fully functional, pressing force: 60 t, bale weight: 450 kg, DIXI 60 SLD horizontal press baler 2014 year of production Semi-automatic 60 ton press system for economical volume reduction of residual (recyclable) materials in industry and retail: Cardboard Tetra Packs foils Foams PET bottles Insulating mats and other compressible materials. Machine dimensions L x H x W approx. mm: 4150 (5080) x 1725 x 2035 Filling opening W x H (standard) mm: 990 x 1110 Machine weight approx. kg: 5420 Pressing force max. kN: 60 t / 600 kN Ironing cycle (average value) approx. s: 47 Bale size W x H x L approx. mm: 800 x 1100 x 1200 Bale weight (depending on material) approx. kg: 370-410 Crjbswdtrzj E Shbxjb Binding: manual Number of ties: 3, with wire Drive power: 7.5 kW; 400V/32A Freight costs depend on the weight, volume and above all on the distance, the following information is relevant for inquiries: Delivery address (postcode and name of the town), but further details require a telephone call, so we ask you to inquire about transport costs and other delivery modalities to contact us by phone. Our contact details can be found under the legal information of the seller. We sell and export worldwide, due to our very large storage capacity we can also deliver larger quantities flexibly and quickly. We issue intra-community invoices - excluding VAT. Opening hours Mon-Fri: 8 a.m.-4 p.m. sat .: closed

Condition: reconditioned (used), Year of construction: 1992, Functionality: fully functional, machine/vehicle number: 91-01611001, pressing force: 16 t, bale weight: 80 kg, filling opening width: 545 mm, filling opening length: 680 mm, bale length: 800 mm, total width: 860 mm, total height: 1,680 mm, total length: 3,530 mm, bale height: 550 mm, bale width: 600 mm, overall weight: 1,200 kg, power: 3 kW (4.08 HP), A horizontal baler that can be filled via a chute and can be operated with a light barrier. Crsb E Shjv T R Utebxob The bales are tied manually using two strapping bands.

Condition: refurbished (used), Year of construction: 2010, operating hours: 26,174 h, machine/vehicle number: 01527 Veolia Gent, Sold by Bollegraaf Recycling Solutions, the original manufacturer of this Bollegraaf baler. Baler will be sold fully refurbished according to the 'Bollegraaf OEM Certified Refurbishment standards'. This inclused 2 year guarrantee. Contact us for more information or a quotation. Technical data baler Typ HBC 120 K Year of construction 2011 Press power main press 120 tons Press power of pre-press 70 tons Feed channel 1,600 x 1,100 mm Bale size 1,100 x 720 mm Driving motor 90 kW Double channel pressure cilinder for increased bale weights Baler will be sold fully refurbished according to the 'Bollegraaf OEM Certified Refurbishment standards'. This inclused 2 year guarrantee. Contact us for more information or a quotation. General principles of refurbishment Cleaning & disassembly Before the actual refurbishment takes place the baler is completely cleaned and disassembled in our refurbishment workshop. Tolerances After the disassembly the tolerances of all steel components are measured and re-welded where necessary, this at least applies to the following components; • Ram, • Frame, • Channel, • Pre-press-flap After disassembly and inspection the ram is welded-up again and fitted with new ram wheels. The protective grids and the pre-press flap are made dent-free and repaired where necessary. Repainted After measuring the tolerances and any repair- and welding work, all components are being blasted and coated again. Hydraulics: The hydraulic tank is cleaned. The hydraulic lines & hoses are replaced. The hydraulic components are repackaged. The hydraulic oil is replaced. Cabling: All cabling is checked and replaced if necessary. Cjb E Shsq D Az Robxorb All junction boxes are replaced and placed back in easily accessible positions. Wear parts: All wearing parts are replaced. The pins and shafts of the cylinders and the channel are replaced with new ones. All wearing parts of (both) needle installations and knotters are replaced for new. Cylinders: The cylinders are repackaged and, if necessary, provided with a new chrome layer or a new cylinder rod. MCC Cabinet The switch box is checked and cleaned. If necessary, electronic components are replaced with new ones. The PLC and HMI (human interface) are replaced with the latest Schneider M340 version including the latest software.

Condition: ready for operation (used), Baler Model HSM V-press 1160 plus Pressure (kN) 532 Efficiency (bales/h) 1-2 Max. bale size (mm) 1200x1100x1000-1200 Dimensions L x W x H (mm) 1780x1150x2985 Power (kW) 7.5 Year 2007-2008 price 5300eur Year 2009-2010 price 5600eur Year 2011-2013 price 6300eur Cob E Sora Nyujhbxerb Weight (kg) 2300 ALSO AVAILABLE YEARS 20017- 2018 - 7500eur

Condition: like new (used), pressing force: 3 t, Professionally refurbished, tested, new oil, new bale trolley, strap rolls. 3 Tonnes press force Creb Esr Ik Azj Shbxeb Bale weight (kg) approx 30-60 Dimensions WxDxH (mm) 845 x 745 x 1965

Condition: excellent (used), Year of construction: 2021, Functionality: fully functional, pressing force: 30 t, Baler paper baler Bramidan Bramin B30 W, year of manufacture 2021, weight 1640 kg, for cardboard/plastic film/paper, motor 4 kw 400 volt, pressing force 30 tons, cycle time 43 sec, dimensions HxWxD 3350x2080x1270 mm, feed opening WxH 1525x560 mm, transport height 2350 mm, machine is equipped with Bra-In App, Ser.No.437524, very good condition Crsb E Shjq Rt Ddebxjb

Condition: excellent (used), Year of construction: 2006, Balemaster Cjb E Ssrdwlkehbxsrb Year: 2006 Type: CMG 268 Waste compactor

Year of construction: 2008, Condition: good (used), Horizontal baling press Build in 2008 Bale size 800x1000x1400 Loading height 1250mm Crob E Shsg Ibt Njbxjb

Condition: excellent (used), Year of construction: 2013, Functionality: fully functional, pressing force: 60 t, bale weight: 450 kg, DIXI 60 SLD horizontal press baler 2013 year of production Very good condition of the device - constantly serviced by an authorized service. The press has one factory new actuator installed. Ready for use. Perfect cutting range of the press stamp. Number of bales made: 4028 Crjb E Showcwg Tsbxob Semi-automatic 60 ton press system for economical volume reduction of residual (recyclable) materials in industry and retail: Cardboard Tetra Packs foils Foams PET bottles Insulating mats and other compressible materials. Machine dimensions L x H x W approx. mm: 4150 (5080) x 1725 x 2035 Filling opening W x H (standard) mm: 990 x 1110 Machine weight approx. kg: 5420 Pressing force max. kN: 60 t / 600 kN Ironing cycle (average value) approx. s: 47 Bale size W x H x L approx. mm: 800 x 1100 x 1200 Bale weight (depending on material) approx. kg: 370-410 Binding: manual Number of ties: 3, with wire Drive power: 7.5 kW; 400V/32A Freight costs depend on the weight, volume and above all on the distance, the following information is relevant for inquiries: Delivery address (postcode and name of the town), but further details require a telephone call, so we ask you to inquire about transport costs and other delivery modalities to contact us by phone. Our contact details can be found under the legal information of the seller. We sell and export worldwide, due to our very large storage capacity we can also deliver larger quantities flexibly and quickly. We issue intra-community invoices - excluding VAT. Opening hours Mon-Fri: 8 a.m.-4 p.m. sat .: closed

Condition: as good as new (ex-display), Year of construction: 2021, Baler in perfect condition as new. PRESS FORCE 5 ton, 50 kN BALE WEIGHT (kg) Cardboard: 80-110 | Plastic: 90-130 BALE SIZE (mm) 1000 x 650 x 700 Ceb E Shsh Rx Edobxerb