Used Bale presses for sale (212)

Condition: as good as new (ex-display), Year of construction: 2025, The BTS-Bag Press is ideal for compacting your dry and wet waste into a garbage bag. Large bulky rubbish, but also recyclable materials can be compacted easily and safe to a minimum of its size. The bag compactor impresses with its ease of use and its enormous volume reduction. By compacting these waste and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you also create a safe and clean working environment. Pressing force: 3 Ton Compaction: up to 90 % (material depending) Machine size: 1861 H x 1200 W x 630 D mm Machine weight: 325 kg Transport height: 1861 mm Dkohsbhu Iqoxzuf Iol Cycle times: 20 seconds Motor: 1.5 kW 13 Amp Power supply: 220 - 240 V (1 phase) Noise level: 68 dB User-friendly lever control Optimum utilization of garbage bins Reduces the number of waste bins No more climbing into bins Reduces frequency of waste collection A quality product “Made in Europe” Suitable for compacting Dry and wet waste materials Recyclable materials Paper and cardboard Light valuable materials Optional extras Machine colour RAL Machine galvanized PLC auto compaction cycles Power supply 380 - 400 V (3 phase) Waste Baler, Waste Compactor, Cardboard Baler, Film Baler, Foil Baler, Packaging Plastic Film Foil, Bailer, Baling Press, Garbage Press, Trash Compactor, Baling Compactor, Paper Press, Waste Paper Press, Cardboard Press, Cardboard Compactor, Foil Press, Paper Baling Press, Waste Baler, Residual Waste Compactor

Condition: excellent (used), Year of construction: 2019, operating hours: 137 h, A Paal Dokon channel baler from 2019 with 137 operating hours and approx. 2300 pressed bales is for sale. The press can be operated stationary and mobile with the following accessories. Technical data: Pressing force: 170 tons Channel cross-section: 1090 x 1080 [mm] Funnel filling opening: 1000mm x 2000 [mm] Connected load: approx. 132 kW Conversion to Rasspe RS9000 knotter Press is on a Faymonville Max 100 axle low loader from 2018 with a 48 ton payload. To operate the press, there is an overseas container as a unit container with a power generator and hydraulic unit: 45' sea container, 60mm mineral wool insulated, partially reinforced for power and hydraulic unit MOSA GE FSX electric unit Three-phase stand-by power: 385 kVA (308 kW) / 400 V / 555.7 A Three-phase PRP power: 350 kVA (280 kW) / 400 V / 505.2 A Motor: FPT C13 TE2A Maximum power mains stand-by: 330 kW Maximum power mains PRP: 300 kW Cylinders/displacement: 6 / 12900 cm³ Speed: 1500 rpm Tank capacity: 580l Weight: 4050 kg Hydraulic unit: Pump1: 75 kW Q= 515 l/min Pump2: 30 kW Q= 180 l/min Pump3: 18.5 kW Q= 56 l/min System pressure: 295 bar Filling capacity: 3100 liters Container is on a Vlastuin D-Tech Flexitrailer. For filling there is a bunker with a belt, transported on a Wackenhut Sanh platform: 15 m³ storage bunker Feed length: 3.6 m Rise length: 6.26 m The bales are then wrapped with a PTF Häuser Rotowrap 40 bale wrapper: Dkshxzufomx Sn Ss Iol Performance: 90 t/h or 45 bales/h Wrapper is on a Faymonville Max 300 tandem low loader. A Cross Wrap bale shredder is available for recycling. In summary: 1x Paal Dokon channel baler 1x Faymonville Max 100 4-axle low loader 1x sea container for electric and hydraulic unit 1x Vlastuin D-Tech Flexitrailer 1x bunker and belt 1x Wackenhut Sanh platform 1x PTF Häuser Rotowrap 40 bale wrapper 1x Faymonville Max 300 tandem low loader 1x bale shredder Further information, details and exposé can be provided on request.

Condition: used, Year of construction: 1980, pressing force: 100 t, bale weight: 600 kg, filling opening width: 1,100 mm, filling opening length: 1,625 mm, bale height: 1,100 mm, bale width: 1,100 mm, overall weight: 28,000 kg, power: 825 kW (1,121.69 HP), cylinder stroke: 2,300 mm, Machine has always been used as a backup for a larger machine. Machine is currently disconnected. The machine is in working condition, but could definitely use some attention. The machine leaks a little oil at some valves. We can offer parts, service and installation separately. The machine is currently in Greece. Dehxzuovmqm Njf Iskl

Condition: used, Year of construction: 2011, pressing force: 3 t, power: 0.001 kW (0.00 HP), Baler / press for waste paper, film and cardboard BRAMIDAN B3 - used. The BRAMIDAN B3 baler is a compact machine for compacting and compacting cardboard and foil. The baler has a high press ratio and effectively reduces the volume of waste. It is ideal for use in warehouses, wholesalers and logistics companies. The cardboard baler is equipped with a swing door, maximum bale size 77x50x60 cm. Pressing time with return stroke 24 s. The BRAMIDAN B3 cardboard compactor is a professional device that effectively reduces waste. It enables waste to be baled into ready-to-collect bales, which are double-bound using strapping. The bales are compact and easy to handle. The baler is ideal for wholesalers, warehouses, grocery shops and clothing shops. Technical specifications Model : BRAMIDAN 3 Width : 82 cm Depth : 72 cm Dkohxzjtvmbteuf Iel Height : 198 cm Weight : 310 kg Power : 1.1 kW Voltage : 230 V Press force : 3 t Net price : 1799.00 euro each year of manufacture 2010 (Commodity code : MTP006934) 1929.00 euro each year of manufacture 2011 (Commodity code : MTP005286) 1999.00 euro each year of manufacture 2012 (Commodity code : MTP006932) 2049,00 euros a piece year of production 2014 (Commodity code : MTP006525) 2169,00 euros a piece year of production 2015 (Commodity code : MTP005287) 2289,00 euros a piece year of production 2017 (Commodity code : MTP005288) 2329,00 euros a piece year of production 2018 (Commodity code : MTP006933) 2399,00 euros a piece year of production 2020 (Commodity code : MTP006526) * Shipping throughout Europe possible. * The above offer does not include transport costs. * Location: Chmielów/Tarnobrzeg, Poland.

Condition: excellent (used), Year of construction: 2016, Functionality: fully functional, pressing force: 50 t, Perfectly functioning, fully equipped, cleaned, new oil. Dkohxzufov Udpmj Isl

Condition: new, We offer spare parts for Dixi balers 60S, 50S, 30S, 18S, 10S, 6S, 5SK, 4S New and used parts available. Dkjhjq S N Rhsxzuf Isl Spare parts catalogs are available on request.

Condition: as good as new (ex-display), Year of construction: 2025, The BTS-MF550 is the ideal waste baler for compacting your loose cardboard and plastic film waste into a bale of up to 550 kg. The baling press impresses with its ease of use, safe operation and its spacious filling chamber, it is ideal for medium to large amounts of material. By baling these valuable and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Pressing force: 50 Ton Bale weight: up to 550 kg (material depending) Dehofgbtcoxzuf Ijkl Bale size: 1200 H (var.) x 1500 W x 800 D mm Machine size: 3217 H x 2115 W x 1200 D mm Machine weight: 1650 kg Transport height: 2500 mm Loading aperture: 1500 W x 770 H mm Cycle times: 40 seconds Motor: 5.5 kW 16 Amp Power supply: 380 - 400 V (3 phase) Noise level: 68 dB Dual cylinders for even compaction of the material User-friendly lever control Bale kicker for easy eject the bales Retainer for reducing the material spring back Reel holder for 5 rolls of strapping A quality product “Made in Europe” Suitable for compacting Cardboard Plastic film and foils Big Bags Clothes Light valuable materials Optional extras Machine colour RAL PLC auto compaction cycles with bale full light and E-stop with locking key Sliding top door Strapping rolls Motor 11 kW 32 Amp Waste Baler, Waste Compactor, Cardboard Baler, Film Baler, Foil Baler, Packaging Plastic Film Foil, Bailer, Baling Press, Garbage Press, Trash Compactor, Baling Compactor, Paper Press, Waste Paper Press, Cardboard Press, Cardboard Compactor, Foil Press, Paper Baling Press, Waste Baler, Residual Waste Compactor

Year of construction: 2001, Condition: good (used), HSM-500.1_VL PRESS PAPER PRESS FILM PRESS BALER ready to use good CONDITION used & good / see photos model: HSM 500.1 VL machine no. 6135.244.P serial no. 220109689 pressing pressure 50 tons V 400; Hz 50 KW 7,5 Amp. 15,5 Pressing force 6 tons Year of manufacture 2001 more presses in our other offers article used and good / roughly cleaned (plug in and go ) dimensions: Dkehelc Du Nsxzuf Isl on request !!! Other photos are for further use possibility. All items seen in photos also available from us. Price quotation net per piece for pickup from stock 47441 Moers current stock 1 piece Viewing is expressly offered. more technology in stock see photos or ask by phone General: We offer here from various acquisitions articles, which we describe as well as possible, as well as set meaningful photos. Further details about the article can not be made. We offer the possibility of Tuesday and Thursday in the time between 9 and 16 o'clock after telephone appointment to visit. If necessary, the article can be taken away immediately. Answers to this article we can offer due to time constraints only if you provide us with a phone number when you request. This offer, unless specifically described, is USED GOODS. Any packaging may be damaged. Items have been visually inspected and are as far as technically ok. All offers ex stock 47441 Moers. If you want shipping, please contact us to discuss packaging and shipping costs. Call with interest gladly by. all dimensions are approximate Errors in the description expressly reserved.

Condition: used, Year of construction: 1979, Functionality: fully functional, machine/vehicle number: Bikan 50, Lindemann baler (semi-automatic) with feeding belt for sale. Machine is still partly in production. The condition of the machine is very good for its age. The machine is currently in Poland. Technical data Pressing force: 50T Bale dimensions: 700 x 1100 mm Pressing stroke: 1300 mm Number of wires: 4 Dshxzuevmm D Rof Iokl Feed belt: Floor section: 2,000 mm Rising section: 4,500 mm Upper curve: 2,000 mm

Condition: excellent (used), Year of construction: 2010, ZENTEX PPH 5 baler is a device for compacting and crushing cardboard and foil. The baler makes it possible to reduce the volume of waste material and is ideal for warehouses, wholesalers and logistics companies. The cardboard baler is equipped with a swing door, maximum bale size 70x50x45 cm. Pressing time including return stroke 23 s. Advantages of the Zentex PPH 5 carton press: - Reduced volume of waste going to recycling - Saves time spent on waste management - Equipped with a module to compact paper and film - Prevention of space restriction by stored cardboard and foil in alleys and aisles. The offer concerns the Zentex PPH5 waste paper and film baler : - Manufacturer: ZENTEX - Product condition: used - Year of manufacture : 2010,2012,2013 - Model: PPH5 - Width: 84 cm - Depth: 72 cm - Height: 207 cm - Weight: 360 kg - Power: 1500 w - Voltage: 400 v Net price : 1890.00 euro each year of manufact. 2010 (Product code: MTP000234) 1990.00 euro each year of manufact. 2012 (Product code: MTP000235) 2090.00 euro each year of manufact. 2013 (Product code: MTP000236) The Zentex PPH 5 cardboard compactor is a professional device that effectively reduces waste. It bales waste into ready-to-collect bales, which are double-bound by strapping. The baler is ideal for companies with small quantities of waste, small wholesalers, food shops and clothing shops. * Large quantities available, prices can be negotiated for larger orders. * Transport throughout Europe possible. * The above offer does not include transport costs. * Location: Chmielów/Tarnobrzeg, Poland. Dkohxsndcxgozuf Iel

Condition: reconditioned (used), Year of construction: 2005, operating hours: 15,604 h, Functionality: fully functional, pressing force: 50 t, bale weight: 500 kg, filling opening width: 1,050 mm, filling opening length: 1,250 mm, bale length: 1,200 mm, total width: 1,700 mm, total height: 2,400 mm, total length: 7,800 mm, bale height: 700 mm, bale width: 1,100 mm, input voltage: 400 V, overall weight: 12,500 kg, input current: 64 A, transport height: 2,400 mm, power: 30 kW (40.79 HP), year of last overhaul: 2024, volume flow: 160 m³/h, transport width: 1,700 mm, transport length: 7,800 mm, nominal current: 64 A, tank capacity: 600 l, Hello, We are offering you a used baler from the manufacturer Presto GmbH & Co. KG, type HPK 50 B, subject to change. The following technical data was taken from the manufacturer's operating instructions and brochures, for which we cannot guarantee their accuracy or completeness. Manufacturer Presto GmbH & Co. KG Dkshxzeuan Hzsuf Iol Type HPK 50 B Year of manufacture 2005 Pressing force of main press 50 t Drive power 30 kW Total connected load 31.5 kW Rated current 64 A Throughput under operating conditions with a bulk weight of 60 kg/cbm approx. 6.7 t/hour Machine weight of press 12.5 t Note: The machine is currently in our workshop for overhaul and is expected to be tested and ready for sale in February. The machine documentation is available in German. A viewing of the press is possible by appointment in our workshop. We would be pleased if this machine is of interest to you. Your service team Mertens & Frowein GmbH

Condition: good (used), Year of construction: 2014, operating hours: 8,350 h, Functionality: fully functional, Fully functional baler for sale in Duisburg. Already dismantled Dkohxsva Ebhezuf Iol

Condition: excellent (used), Year of construction: 2018, Two balers, Bramidan X30 - second-hand - : Price (for both together) ex location: 17.500.-€ (net) Please note that one of the two balers has to be repaired - there is a cost estimate of approx. 1.500.-€ (net)! Manufacturer: Bramidan Type: X30 AD Machine number PEY395533 (second number on request) Year of construction: 2018 Pressing force: 30 t Bale size: WxDxH (mm) 1200 x 800 x 1000 FILLING OPENING: WxH (mm) 1090 x 655 BALE WEIGHT: Cardboard (kg) 275-350, plastic film (kg) 325-425 Djhxstq Hriezuf Ijkl Recyclable material types: Cardboard, plastic film, paper, PET bottles, aluminum cans, tin cans, hard plastic, textiles, styrofoam. 3 x 230 - 400V, 50Hz, Amp: 25/16 db: 59-60 Weight: 1.650kg Condition: good - very good Available: immediately Location: 21465 Reinbek

Condition: like new (used), Year of construction: 2018, Functionality: fully functional, pressing force: 10 t, Fully equipped and ready to use. New oil. Dshxzjv Tfhnsuf Iekl

Condition: excellent (used), Year of construction: 2006, operating hours: 2,632 h, Functionality: fully functional, machine/vehicle number: 29.381, pressing force: 35 t, filling opening width: 62 mm, filling opening length: 100 mm, incl. feed belt Dkjhsvaw T Ajxzuf Isl

Condition: reconditioned (used), Functionality: fully functional, We offer numerous used and tested spare parts for Dixi presses 60 and 80 SLD and SLS. Photos are only examples. Dkjhxzufovfnfms Iol

Condition: excellent (used), Year of construction: 2007, operating hours: 21,676 h, Functionality: fully functional, pressing force: 78 t, bale weight: 600 kg, filling opening width: 750 mm, filling opening length: 1,500 mm, bale height: 750 mm, bale width: 1,100 mm, overall weight: 25,000 kg, transport height: 3,000 mm, oil tank capacity: 1,000 l, power: 55 kW (74.78 HP), net weight: 25,000 kg, volume flow: 930 m³/h, operating pressure: 250 bar, How do you do? We are pleased to offer you a used baler of the manufacturer Presona AB, type LP 80 VH1. Dehxzusvgrh Uef Iekl The following technical data was taken from the manufacturer's operating instructions and brochures, for which we cannot accept any liability for correctness and completeness. Manufacturer Presona AB, Sweden Type LP 80 VH1 Year of manufacture 2007 Total operating hours, 21,676 hours, as of November 2024 Main press force 78 t Specific pressing force 95 N/cm² Pressing force of prepress flap 28 t Dimensions of feed chute 1,500 x 1,100 mm Filling volume / pressing cycle 2.7 m³ Throughput capacity under operating conditions 410 m³/hour Bale dimensions 1,100 x 750 mm Drive power 55 kW Tying 5-fold vertical Hydraulic oil tank volume 1,000 L Baler dimensions assembled with hopper 10,985 x 3,750 x 4,310 mm (L x W x H) Machine weight press approx. 25 t Note: The machine was used by a recycling company to compact paper, cardboard and film. The press is in good condition, in operation until January 2025 and can be inspected by appointment. We would be delighted if this machine is of interest to you. Your service team Mertens & Frowein GmbH

Condition: used, Year of construction: 1994, pressing force: 40 t, power: 22 kW (29.91 HP), We are selling the BAUER 300 baler. Dkohxzsv S Uwijuf Iol Technical specifications: Installation of the secondary raw material baler Manufacturer: BAUER Model: 300 Year of production: 1994 Power: 22 kW Pressing force: 40-50 t The dimensions of the baler are 10,300 x 2,000 x 3,000 mm Tipping weight: ~ 400 kg PRICE AVAILABLE ON REQUEST!

Condition: used, Year of construction: 2011, machine/vehicle number: 340000674, The HSM V-Press 403 baler is a compact solution for the efficient compaction of waste and recycling materials. This used baler offers excellent performance and is ideal for companies looking to optimize their waste management and save space. With its robust design and user-friendly operation, it is perfect for use in various industries. Dkohxzounzn Njuf Isl Technical details: Machine no. 6113.114 Serial number 340000674 Pressing force: 33 kN Power supply: 400 V / 50 Hz Dimensions: approx. 1,200 x 800 x 1,500 mm (L x W x H) Output: 1.1 kW Rated current: 2.6 AMP Year of construction: 2011 Weight: approx. 300 kg

Condition: reconditioned (used), Year of construction: 2012, Functionality: fully functional, machine/vehicle number: PVM 324212-1, pressing force: 20 t, bale weight: 250 kg, filling opening width: 1,200 mm, filling opening length: 480 mm, bale length: 1,200 mm, total width: 1,030 mm, total height: 2,790 mm, total length: 1,775 mm, bale height: 1,200 mm, bale width: 800 mm, input voltage: 400 V, overall weight: 1,250 kg, warranty duration: 6 months, input current: 16 A, noise level: 64 dB, power: 4 kW (5.44 HP), type of motor: electric motor, BRAMIDAN vertical baler B 20 suitable for pressing cardboard and foil - very well preserved, overhauled in the workshop, new hydraulic hoses. UVV test according to DGUV rule 214-017 when delivered new. Dkohxzevm U Rlouf Isl Price ex works Stutensee, own collection possible, alternatively shipping by freight forwarder in the cost statement

Condition: good (used), Year of construction: 2009, Functionality: fully functional, pressing force: 36 t, Traction force: 36 t Year of manufacture: 2009 Bale size: 1100x750mm Engine: 15 kW Open weight: 4500 kg Dkehxzujvyzkljf Iel

Condition: reconditioned (used), Year of construction: 2004, Functionality: fully functional, pressing force: 60 t, bale weight: 550 kg, filling opening width: 1,150 mm, filling opening length: 735 mm, total width: 2,000 mm, total height: 2,880 mm, total length: 1,900 mm, bale height: 1,200 mm, bale width: 1,200 mm, overall weight: 3,575 kg, transport height: 1,970 mm, power: 7.5 kW (10.20 HP), year of last overhaul: 2023, volume flow: 116 m³/h, transport width: 2,000 mm, transport length: 1,900 mm, How do you do? We hereby offer you, without obligation, a used, vertical baling press, from the manufacturer HSM, type VL 600, with 60t pressing force, year of manufacture 03/2004. The machine was used in a small logistics center for baling paper, cardboard and film and was only in operation for a few hours per week. Dkshxeuaxv Tozuf Isl The machine has been partially overhauled and tested. The machine documentation is available in German. A viewing of the press is possible by appointment. We would be pleased if this machine is of interest to you. Your service team Mertens & Frowein GmbH

Condition: used, Year of construction: 1994, pressing force: 50 t, power: 22 kW (29.91 HP), We sell baler BAUER Technical data: Installation of the secondary raw material baler Manufacturer BAUER Model 401 Year of production 1994 Power 22kW Dkohxev R Dtdezuf Iel Compressive force 40-50 t The dimensions of the press are 10300 x 2000 x 3000 mm Tipping weight ~ 400 kg PRICE ON REQUEST!

Condition: reconditioned (used), Year of construction: 2013, operating hours: 18,819 h, Functionality: fully functional, pressing force: 60 t, bale weight: 400 kg, filling opening width: 1,085 mm, filling opening length: 2,815 mm, bale length: 1,200 mm, total width: 3,140 mm, total height: 2,900 mm, total length: 8,840 mm, bale height: 800 mm, bale width: 100 mm, overall weight: 7,380 kg, transport height: 2,900 mm, power: 9 kW (12.24 HP), year of last overhaul: 2023, transport width: 2,400 mm, transport length: 5,650 mm, Good day, We hereby offer you a used baler from the manufacturer Strautmann, type BaleTainer. The following technical data was taken from the manufacturer's operating instructions and brochures, for which we cannot accept any liability for correctness and completeness. Manufacturer Strautmann Type BaleTainer Year of construction 2013 Operating hours 18,819 hours Number of bales pressed 7,019 pieces Pressing force main press 60 tonnes Drive power 9.2 kW Machine weight press 7.38 tonnes Dshot H Rgfsxzuf Iokl The baler was partially overhauled. The piston rods and seal sets of the two main hydraulic cylinders were replaced and general maintenance work such as oil and filter changes etc. was carried out. Finally, after the overhaul work, the machine was tested. The press is equipped with a hydraulic tilting device for loading in order to empty lattice box containers on a truck ramp. For example, the machine can be positioned with the tilting device on a truck ramp. There, the employees can roll the material to the tipping device with a mesh trolley and then have it tipped hydraulically into the baler. The machine can also be loaded from the side via the large feed/storage container using a forklift truck or wheel loader. Conveyor belt loading would certainly also be feasible. The machine documentation is available in German. A viewing is possible by appointment in our workshop. We would be delighted if this machine is of interest to you. Your service team Mertens & Frowein GmbH

Condition: good (used), Year of construction: 2011, operating hours: 20,580 h, Functionality: fully functional, pressing force: 48 t, bale weight: 450 kg, filling opening width: 1,020 mm, filling opening length: 1,250 mm, bale length: 1,200 mm, bale height: 750 mm, bale width: 1,100 mm, overall weight: 12,000 kg, transport height: 2,750 mm, oil tank capacity: 300 l, power: 30 kW (40.79 HP), transport width: 2,300 mm, transport length: 8,500 mm, type of motor: three-phase motor, nominal current: 59 A, tank capacity: 300 l, Good day, Dkohxjt H Rcaszuf Iol We hereby offer you a used baler from the manufacturer HSM, type VK 4812. The following technical data was taken from the manufacturer's operating instructions and brochures, for which we cannot accept any liability for correctness and completeness. Manufacturer HSM Type VK 4812 Year of manufacture 2011 Operating hours 20,580 hours Main press force 48 tonnes Drive power 30 kW Machine weight press 12 tonnes The machine documentation is available in German. A viewing is possible by appointment in our workshop. We would be delighted if this machine is of interest to you. Your service team Mertens & Frowein GmbH