Used Beverage production for sale (923)

Condition: used, Year of construction: 2000, Overview  The labeler was manufactured in 2000 by the German manufacturer Krones. It can label up to 22,000 bph and has processed 0.5l so far. The machine can be purchased refurbished and with warranty on request.  Technical data  Rotary labeling machine for the application of a wrap-around label Capacity: max. 22.000 bph  Processed formats: 0,5l Number of plates: 15 Hot glue Label: OPP Roll fed Dcshxsm Ip Dkj D I D Asg

Condition: used, Year of construction: 2011, Overview  This Heuft Glas InLine reflexx IR is an inspection machine for empty bottles, designed for quality control in filling lines. The machine has a maximum output of 46,000 bottles per hour and was originally delivered in December 2011. It is in very good condition and ready for use at short notice. The flow direction is from left to right and it is equipped with a Secomak blower instead of a compressed air blow-off system. Technical details  Output: Maximum 46,000 bottles/hour Flow direction: Left to right Equipment: Two triggers Secomak blower Transponder recognition for RFID test bottles Rejection monitoring Heuft HLAN network (can be retrofitted as an option) Two-way rejection Delta K to the right Four type licenses Delta K tripods for belt height of 1130 mm Two fluids for lye detection Missing components Infeed control (must be added if required) Thread blow-off (must be added if required) Documentation (not available, can be replaced) Controls  Monitoring of the incoming bottle flow (optional) Output of a stop signal if bottles are too high, too wide or lying down Inspection of the bottle base Inspection of the mouth sealing surface Inspection of the thread Inspection of the inner and outer side wall Detection of conductive liquids (e.g. lye) Detection of residual liquids (e.g. oils, paints) using IR technology Rejection of faulty containers or output of a rejection signal Monitoring of the rejection process Dcjhx D I Dou N Snke Aeg

Condition: used, Year of construction: 2011, Overview  The bottle cleaning machine was built by the German company Krones in 2011. It was in operation at a large beverage producer until last and is still assembled.  Technical details  Capacity: 20,000 bph Formats: 0,25l and 0,75l Number of bottles per row: 22 Siemens S7 Equipment Label discharge  Rotary spraying  Continuous machine  Stainless steel body  Documentation  Software backup  Stainless steel pumps  Conductivity measurement  Finger task  Spare parts Bottle cell tips Bottle cell supports Dehxsu Rindo D I D Ascg

Condition: used, Year of construction: 2020, Overview This automatic fishfilet-skinner, type: Varlet 1258 was built in 2020 in France. The Varlet skinner has been designed for fully automatic skinning of fish fillets (f.e. Thick skin fillet , Fresh salmon , Smoked salmon , Fresh trout , Smoked trout). The V1258 is an easy to use, industrial, single track automatic skinning machine. It is placed on a support on wheels and proposed with an outfeed belt. Specially designed for firm-fleshed fish such as trout or salmon, the V1258 can skin both fresh (water) and smoked (air) fillets. The V1258 is equipped with a notch thickness adjustment system. Its small footprint is achieved by replacing the outfeed belt with a tilting slide that can be removed without tools, to receive the products in boxes. Finally, this automatic machine improves the safety of the user. Technical Details Cutting width: 320mm Height: 1300mm Width: 800mm Length:  1200mm Weight: 140kg  Power: 1,2Kw Scope of delivery Automatic for fish filets | VARLET | 1258 | 2020 Dcohxju U Hrxj D I D Ajg

Condition: used, Year of construction: 2012, Overview  This packaging machine for cups was built in 2012 by the German manufacturer Schubert. The machine was last used by a dairy company, is in a well-maintained condition and is available immediately. Technical details  Output: 270 cups/minute Format range Round cups D = 63 - 95 mm H = 35 - 125 mm 2 - chamber cup 86 x 86 mm 109 x 109 mm (square) 125 x 95 mm (oval) Type of packaging Primary packaging Cups in sleeves, then in trays and crates Format range, max. sleeve length flat blank: 450 mm Secondary packaging Trays and trays: Solid cardboard (trays) and corrugated cardboard Format range, flat cut: 200 x 400 mm - 600 x 800 mm Tray height = 15 - 55 mm Tray height = 35 - 100 mm Last used for Tray 24 Tray of 8 12 tray Control: Schubert via individual modules Weight: approx. 15 tons Further information, pictures and videos of the machine on request Dcehxsvpd S Re D I D Aeg

Condition: used, Year of construction: 2018, Overview The ABE GLASSPAK 66 is an isobaric filler that is currently in operation and can be viewed. The machine was manufactured by American Beer Equipment (ABE) in the USA in 2018. It has a maximum output of 4,000 bottles per hour for 0.33-liter bottles. The system is designed for 26 mm crown corks and has 18 filling stations. Technical details  Output: 4,000 bottles/hour (for 0.33-liter bottles) Type of closure: 26 mm crown cork Formats: 0.33L Filling stations: 18 Electrical specifications: Max. Voltage: 208-240 V Total current draw: 38.5 A Maximum motor current: 10.6 A Phase: 3-phase Frequency: 60 Hz Dohevpi Abox D I D Aecg

Condition: used, Year of construction: 2007, Overview  The filling line for gable top packaging was manufactured in 2008 by the Norwegian company Elopak. It consists of a carton filler, cap applicator, and packer. The filling line is still installed, but no longer connected. However, it can be inspected in person. Technical Details  Capacity: 8,000 cartons/ h Formats: 0,5l 0,75l 1,0l Operating hours: 32,500 Scope of Delivery  Aseptic Carton Filler | Elopak | S-PS80HA | 2008 3x Cap Applicator | Elopak | PLA-S30 | 2009 Tray Packer | OYSTAR A+F | Traypacker TF | 2011 Dcohx Dety Ddxs I D Aog

Condition: used, Year of construction: 2016, Overview  This labeller and atmospheric filler with capper were both manufactured in 2016. The filler is from Italian manufacturer Alfatek and the labeller is from Spanish manufacturer ENOS. The machines are for sale because the owner has switched his production to KEGs and therefore no longer needs it. The machines are installed and operative in the owner's factory, as shown in the photos. It can be visited and tested in person. Technical details  Filler & Capper | Alfatek | MBC 7/1 LP | 2016 Capacity: 1,000 bph with 0,75l 7-valve filling at 1 bar Filling with inert gas (such as CO2 or N2) to eliminate oxygen Crown capper with single-head adapters for 26 mm and 29 mm Certified as atmospheric Formats used: 0.33l, 0.5l, and 0.75 liters Dimensions of the filling machine: 180cm long 120cm wide 220cm high Labeller | Enos | Compatta | 2016 Capacity: 1,800 bph with shrinking head 1,200 bph with rolling head Automatic lot and expiry date printer by ZANASSI 3 label stations (Front, Back, Neck) Dimensions of the labeling machine: 200cm long 130cm wide 180cm high Dcohxstzg Iho D I D Aeg

Condition: used, Year of construction: 2021, Overview This meat grinder for fresh and frozen meat, type: Laska WW 200-H was built in 2021 in Austria. It is a demo-machine with less working hours (180 hours). The machine is equipped with column loader for 200l trolleys. Throat height: 750 mm Hopper capacity: 385 liters, geometry optimized for complete emptying, screw with high rotations for regular feeding of large pieces – hinged flap for removing the screw, Double sealing system on the drive shaft for better hygiene, Extendable step with protection for better access to the loading hopper, Automatic regulation of rotational speed for the feeding screw and working screw depending on the torque. Automatic stop of the grinding screw in case of product absence, protecting the machine and preventing premature wear of the cutting unit. Electric cabinet integrated with the machine with internal ventilation reducing the risk of condensation. Operator panel with control buttons (start/stop, emergency stop) for easy operation. Throat cover with safety sensor and lock. Technical Details Throat diameter: 200 mm Power supply voltage: 400 V Electric power of the working screw drive motor: 43 kW Capacity: Fresh meat +4 degrees Celsius: 6000 kg/h (final sieve 3 mm); 9500 kg/h (final sieve 5 mm); 11000 kg/h (final sieve 8 mm); Frozen meat -18 degrees Celsius (pre-shredded blocks): 2500 kg/h (final sieve 3 mm); 3100 kg/h (final sieve 5 mm); 3500 kg/h (final sieve 8 mm) Dimensions (length x width x height): 2200 x 2000 x 2400 mm Weight: approx. 2000 kg IP56 protection class (protection against water jets and dust) Scope of delivery Grinder | LASKA | WW 200-H | 2021 Dcehjt H T Apex D I D Asg

Condition: used, Year of construction: 2017, Overview  This crater was built in 2017 from German manufacturer Krones. The machine is in a very good condition, still installed and can be viewed in person at any time.    Technical Details    Capacity  28,800 bottles per hour   1,200 crates per hour   Recently processed parameters  Bottle dimensions  500ml   Outer diameter: 65,50mm   Total height: 206,30mm  Crates  Formation 6x4   Length crate: 400mm   Width crate: 300mm   Height: 255mm  Box inlet direction: transverse  Electrcial connection: 400/ 230V, 50Hz, 15 A  Dcjhjt Rbznsx D I D Ajg

Condition: used, Year of construction: 2010, Overview   This ARCADE GEL 6 bottle washer was built in 2010 by the German manufacturer GM Gera. The machine is still in operation and can be inspected in person at any time. The ARCADE GEL 6 is fully functional and must be replaced due to an increase in performance.   Technical details   Nominal output: 33,000 bph   Control range: 13,200 - 36,300 bph   Chain pitch: 169 mm   Cell pitch: 110 mm   Bottle cells per row: 30 pieces   Total bottle cells: 7,860 pieces   Bottle cells, loaded: 7,680 pieces   Consumption  Compressed air: 1m³   Steam (operation): 489 kg/ h   Steam (heating): 4,430 kg/ h   Electrical power: 48.4 kW   Water: 7.35 m³/ h   Bath volume   Pre-soak: 2,263 l   Pre-caustic: 7,240 l   Caustic 1: 31,755 l   Caustic 2: 350 l   Hot water 1: 350 l  Hot water 2: 350 l   Cold water: 350 l  Dcjhx D Iet Ul Exs D Ajg

Condition: used, Year of construction: 1997, Overview   The filling line for cups was built by HAMBA in 1997, is still in operation until the end of 2024 and can be inspected at any time.   Technical data Output: 20 - 40 cycles/min   Products that can be packed:   Liquid yoghurt milk, 0.3 to 4% fat (20-45°C)   Stirred yoghurt with fruit, max. edge length of fruit pieces 15mm, 0.3 to 4% fat (3-10°C)  Cream, 25 to 35% fat (3-42°C)  Salad dressings with salt, herbs and vinegar  Pudding, sweet (2-70°C)  Cup formats:  Cup diameter: 75 mm   Max. Height 120 mm   Filling ranges:   50 ccm to 250 ccm filler with fruit dosing  30 ccm to 150 ccm filler with fruit dosing  Closure: sealing lid   Control Siemens S7   Scope of delivery  Filling machine | HAMBA | BK 8008 A | 1997  Tray erector | Schäfer and Flottmann | SFS 337 | 1997  Empty crate conveyor | Manex | - | 1997  Packer | AF | - | 1997  Integrated in SIG HAMBA BK 8008 P system  Good maintenance condition  Full crate conveyor | Manex | - | 1997  Layer palletizer | Manex | - | 1997 (revision 2004)  Dohjt Uw E Dox D I D Ascg

Condition: used, Year of construction: 2014, Overview This labeller was built in 2014 by Italian manufacturer Framax. It is an automatic rotary self-adhesive labelling machine for glass bottles with a capacity up to 4,000 bottles per hour.  Techn. Details  Capacity: up to 4,000 bph (0,33l glass bottle, wrap-around label) 2 labelling stations  Max. height of the paper passage 200 mm Max. speed of the output of the paper: 32 m/min. Max. roller outer diameter 300 mm Max label length 180mm Voltage: 400V, 50 Hz  Stainless-steel pass-through conveyor belt (2.500 mm) Stop of the machine in case of container jam-up Low wear and noise levels due to alternated steel and zellamid transmission gears Self-adhesive labelling station speed variation automatically synchronized with the machine  Photocell for paper stop automatic self-regulation for the read-out of the different label colours Photocell of presence of the container Controls panel board fitted on the head Adjustable articulated labels-detacher Dcohx D Isq R Eyao D Asg

Condition: used, Year of construction: 2008, Overview This wrap-around cardboard packer was built in 2008 by Italian manufacturer SMI. The machine is still installed and can be viewed in person. Techn. Details Capacity: up to 45 packs per minute Recently packed: 3x4 cardboard, 0,75L glass bottles Other formats possible Working hours: 1,752 POSYC 3000 Touch panel Dcshermfpvjx D I D Aeg

Condition: used, Year of construction: 1999, Overview This SIDEL blow moulder and KHS filling monobloc were both manufactured in 1999. They are still in production until the end of October and can be viewed in person. The special feature of the filler is that it can process carbonated or still mineral water with natural flavors using a micro-dosing unit. The filler (KHS Innofill monobloc) and accumulation table (Sidel AQ) are also available without the blow molder (Sidel SBO 18 Series 2), price on request.  Technical Details Blow moulder | SIDEL | SBO 18 Series 2 | 1999 Current capacity: 23.400 bph in 1.25L Working hours: 40.000            Number of moulds: 18      Moulds type: Shell type quick change Formats produced: 1.25L Bottles: Cylindrical petaloid base Oven type: Sidel Neck personalization: PCO 1881  Type of preforms: with recycled PET resin Machine was regularly maintained     Machine equipped with:            Sidel preform tipper Sidel hopper with cover & feeder Sidel preforms unscrambler Sidel preforms infeed rail Blowing station for 18 moulds Sidel electrical cabinet with Siemens Sidel PCC drive & control Lanfranchi bottles buffer storage silo            Unscrambler and air conveyor system with drive to the entry KHS monobloc Supplied with all format & spare parts available Rinser, Isobarometric Filler, Capper Monobloc | KHS, Zalkin | VK-E 40/50/10/S PET | 1999 (low working hours) Filling carbonated mineral water and also carbonated mineral water with natural flavours Processing: PET bottles 1,25L & 0.50L cylindrical petaloid base Bottle neck: PCO28 1881 Current capacity: 23.400 bph Number of rinsing nozzles (KHS Innoclean): 40 Number of filling valves (KHS Innofill): 50 Number of capping stations (Zalkin): 16 Including also micro-dosing unit Perrier for natural flavours With caps magazine & elevator Accumulation table Gebo Sidel type AQ file Dynamic accumulation and buffer between the filler outlet and the labeller inlet, avoids untimely stops upstream (filler, blow-moulder) due to the labeller Dehx D Isrqar Ss D Ajcg

Condition: used, Year of construction: 2022, Overview  The filling machine Flowmeters 8 was built in 2022 by Polish manufacturer Perunpack. The machine was only tested, is still under power and can be viewed in person at any time.  Technical Details  Capacity: 800-1000 bottles per hour for the 5 l format Machine can fill containers from 150 ml to 6000 ml. Number of filling stations: 8  Diameter of fillers: 16 mm Machine can fill thick products and typical water  Measurement system is based on Keyence flow meters, special flow meters for dosing machines Machine is equipped with a pump with an elastic rotor that doses the medium into a pressure tank and then onto the fillers. Entire machine is made of 304 stainless steel Siemens control system. Filling from the bottom of the container. Lowering and raising the boom with fillers using a servomotor    Djhx D Ijrziuye D Aocg

Condition: used, Year of construction: 2012, Overview  The complete filling line for big size PET bottles is located at a mineral water plant and was used for filling still water. The line has been regularly serviced and is in very good condition. All machines are from 2012 and have only about 20,000 operating hours. Output: 4,200 bph on 5,0l Formats: 2.5l and 5,0l Closure: 38mm plastic screw cap Label: hot glue List of machines Blow moulder | Sidel | SBO 3 Compact | 2012  Preform kipper || 2012  Preform hopper and feeder || 2012  Air conveyors | NTS || 2012  Rinser Filler Capper | Gallardo | 12-18-4 | 2012  Handle applicator | And & Or || 2012  Labeller | Makro | MHK23P UHM1L1 CE | 2012  Line distributor | Emebe || 2012  Shrink packer | KHS | Innopack Kisters SP | 2012  Handle applicator | Project AE | Progrip 550 | 2012  Dcshx D I Djtr R Tkj Aog

Condition: used, Year of construction: 2014, Overview This MONO-BLOCK bottle filling line was constructed by KOHEM (now CIMEC) in 2014. It operates perfectly and has been well-maintained. Currently, it is dismanteld and stored. The bottle-formats are 33 cl long neck, 75 cl ”champagne-style” and 375 cl champagne style. The capacity is 1000-1300 bph when doing 33 cl long necks. Equipped with pneumatic offloading solution. Machine list Labeling Machine (2014) Manufacturer: CDA Model: R1000 Filler Capper (2014) Manufacturer: Kohem (now Cimec) Model: RIS 8/1 - DPS Dehx Dett Um Ho I D Aecg

Condition: used, Year of construction: 2016, Overview This complete filling line for glass bottles is part of a brewery and used for filling beer in 330 ml glass bottles with crown caps. It consists of an automatic glass depalletizer, self-adhesive labeller, filling triblock and a carton packer. The entire equipment was installed in 2017 by Italian manufacturer Framax. All the equipment is still installed and can be viewed in person during production. Technical details  Production capacity: 2,400 bph (at 0,33l) Formats recently used: 0,33l Bottle diameter: 60mm, height is adjustable 26mm crown cap Packaging: 6x4 carton box Scope of delivery Automatic depalletizer | Framax | DEPAL SS-3000 | 2017 Automatic sheet removal Photocells for depalletizer Selfadhesive labeller | Framax | RLA-H06-S3-L3-D480 | 2016 3 stations for 3 labels (front, back, neck) Date/ batch printer Isobaric filler | Framax | Modulblock RFCI-16/16/1-DPS/C | 2016 Nominal capacity: 3.000 bph 16 Rinsing positions 16 Filling positions Single head capping unit for crown caps with cap feeding unit Double air pre-evacuation with CO2 Water spray device before capping, for reducing the amount of residual oxygen Automatic carton packer | Framax | CP-0700-1T | 2017 Box erecting and inserting machine With taping machine Accessories such as conveyors, cooling, pumps Dcohjtt Um Rjx D I D Aeg

Condition: used, Year of construction: 2018, Overview These 2 cooking-kettles  were built in 2018 by company MKN in Germany. One pressure cooking-kettle and one standard cooking-kettle. They can be used for all kind of batch-cooking  - applications like cooking, blanchering, braising etc. Both machines are on stock. Technical details 1. Pressure cooking braisiére Elektro 2/1 GN External dimensions: 1100 x 850 mm x 700 mm Internal dimensions: 700 x 540 x 300 mm Nominal capacity: 111 litres Usable capacity: 96 litres Electrical connection: 14.4 kW 3 NPE 2. Electric Braisiere Magnum External dimensions: 1000 x 850 x 700 mm Internal dimensions: 700 x 540 x 250 mm Nominal capacity: 92 litres Electrical connection: 14.4 kW 3 NPE Scope of delivery Pressure cooking braisiére | MKN | 2018 Electrical braisiére Magnum | MKN | 2018   Dcehxjtv S I Dj D I D Aeg

Condition: used, Year of construction: 2005, Overview The swing-top closing machine was manufactured by the Austrian manufacturer AMS in 2005. As the current owner has decided not to use swing-top closures anymore, this machine is for sale. Currently the machine is still installed in a brewery. Documentation is available. Tech Specs: Capacity: 12,000 bph Control: Siemens S7 Formats: 0,3 l 0,5 l Number of closing positions: 16 Documentation available Dshxjl Hxmpo D I D Aocg

Condition: used, Year of construction: 2021, Overview The tangential filter system was built in 2021 by the Spanish company sefiltra and used for the filtration of beer. The owner had purchased all the equipment to set up a microbrewery but then decided to shift the production of his beer to a bigger brewery, producing for him.  Techn. details  Filtration system is mounted on stainless steel frame with rollers  Control system: Siemens S7  4 filter cartridges  Recirculation pump CIP connection options Filters particles from 300 µm Dcjhsl Hxnxex D I D Asg

Condition: used, Year of construction: 1993, Overview The GM Gera NAGEMA Arcade DS bottle washer was previously used in a brewery. There it was operated in single-shift operation. Since the sales volume has decreased, the beer of the brewery is now bottled at another location and this bottling line has become available. Due to the low number of operating hours and regular maintenance, the machine is in a very good condition. All basins and the machine body are made of stainless steel. Spare parts, such as bottle cells, are also still available. Furthermore, the main drive shaft, as well as the motor and gearbox were overhauled by SEW in 2018 and the carrier chain was replaced in 2015. The machine is still mounted and can also be demonstrated. Tech Specs: Capacity: 23,000 bph Cell pitch: 85 Bottles per row: 16 Dimensions + weights with attachments: 8640 x 4470 x 1920 mm / 17,900 kg Details: Standard drives Heating with steam Operating side left CE certified Chemistry dosing pumps Machine data sheet Fixed pipe spraying controlled by machine cycle Single-end machine Label discharge rear right Finger discharge + finger feeding Bottle discharge left Bottle cells plastic HMI Lauer Lye concentration measurement 24 Volt control voltage Control S5 (on request conversion to S7) Regularly maintained Water part in VA Fume extraction Sampling taps KSB pumps in VA Plug-in strainers for baths Water meter Conductivity measurement from Endress Additional Equipment: Spare parts included   Dcshjl Hx Adex D I D Ajg

Condition: used, Year of construction: 2011, Overview The pallet banding machine has been manufactured by Eurapack in 2011. It was used in a winery in Germany and will be replaced in January 2023 by a newer machine. The machine will be supplied with the protection fence and light barrier. The technical documentation is available   Tech Specs: Capacity: 140 pallets/h Pallet type: Europallets with 3 - 5 Layers Dcshx D Iol Hx A To D Aog

Condition: used, Year of construction: 2017, Overview The semi-automatic KEG filler was built in 2017 by the German company m+f KEG-Technik and fills 50-60 KEGs/ h into various containers. It is still in operation and can be inspected.  Technical data Capacity: 50-60 KEG/h Formats: 20l, 30l  Containers: KeyKeg, Dolium-KEG, PETainer, KEG  Filling head made of stainless steel  Pressure control by pressure switch (controls hot water and steam pressures for flushing the filling head) Sight glass for product feed line Dimensions (LxWxH): 1.150mm x 800mm x 2.150mm ±50 Control: Siemens S7  More pictures, videos and technical documentation available on request Dcjhsl Hx Nrjx D I D Aeg