Used Beverage production for sale (913)

Condition: used, Year of construction: 1990, Overview The filler was manufactured in 1990 by the German manufacturer Nagema. It was completely overhauled/modernised and also equipped with a new control system in 2022. With the double pre evacuation system it is suitable for beer also besides other carbonated drinks. After the overhauling of the machine, it has not yet been used again. It was planned for a brewery project, where the owner now decided to shift his production to a contract bottler. Therefore the machine is now available for sale. It is properly stored in a warehouse. Technical Specification: Capacity: 9000 bph on 330 ml Number of filling valves: 40 Number of capping elements: 10 Formats: 330 ml and 500 ml Products: beer and CSD Control: Siemens S7 with touch panel Cgjb Hdfel Hxmhjutjt

Condition: used, Functionality: fully functional, total height: 5,500 mm, tank capacity: 21,500 l, warranty duration: 6 months, inner diameter: 2,500 mm, TECHNICAL DATA - Vertical cylindrical on closed feet - Make: CIDEC - Capacity: 215 HL - Material : 316 stainless steel ROOF - Eccentric chimney at the front - Lifting rings VIROLE - Rectangular door with external opening 300×420 mm - Level tube - Partial drain with DN 70 butterfly valve MÂCON - Taster tap BOTTOM - conical with centred drain + bent tube outlet at the front of the tank with DN 70 butterfly valve MÂCON - 4 feet 600 mm high DIMENSIONS - Diameter: 2500 mm - Height: 5500 mm Cgsb Hdfjwamb Isutst

Condition: used, Year of construction: 2006, Overview The BLOMAX 4 blow molder was manufactured by the German company SIG Corpoplast (now KHS) in 2006. It has been overhauled by a machine builder and can be inspected in dry operation. Blow molds are not included, but can be obtained.  Technical details  Output: up to 7,200 bph 4 cavities Dimensions: 4960 mm x 3900 mm x 3000 mm  Weight: 15 t  Operating hours: 44.736  Bottles Volume: 200 ml - 2000 ml   Max. Diameter: 115 mm  Max. Length: 350 mm Preforms  Length: 60 - 200 mm Max. Support ring diameter: 35 mm  Scope of delivery  Blow molder is completely equipped with the system for preform feeding (silo, elevator, sorting, chute) Cob Hdol Hxpksfutogt

Condition: used, Year of construction: 1987, Functionality: fully functional, total height: 7,700 mm, tank capacity: 50,700 l, warranty duration: 6 months, inner diameter: 3,000 mm, TECHNICAL SPECIFICATIONS - Brand : LEJEUNE - Year : 1987 - Material : 304 stainless steel - Volume : 507 HL - Interior finish : 2B - Exterior finish : Brushed - 2.5 % flat bottom ROOF - Central chimney - Ø 500 stainless steel hatch with clamping arm - Lifting rings VIROLE - Stainless steel door 410×520 with external opening - Oval autoclave door and ladder support - Stainless steel DN70 butterfly valve with sludge trap - Stainless steel taster - 1 level - Coil circuit BOTTOM Cjb Hdewal Uaefutogt - DN70 stainless steel butterfly valve - 4 fixing brackets for floor slab DIMENSIONS - Diameter: 3000 mm - Ferrule height: 7700 mm

Condition: used, Year of construction: 2001, Overview The KSB3000 blowing machine was manufactured in 2001 by the Austrian machine builder KOSME. It is located at a machine builder and can be visited in dry run to see the functionality of the machine.  Technical details  Capacity: 3.600 bph  3 cavities Dimensions (LxWxH): 6830 mm x 2860 mm x 2450 mm  space requirement approx. 9x5 m²  weight: 4,5 t  Operating hours: 19.935   Bottles Volume: 250 ml - 2500 ml   Max. Diameter: 110 mm  Scope of delivery  Blow molding machine is completely equipped with the system for preform feeding (the silo, the preform elevator, the preform aligner and the preform infeed). Cgebjl Hxprj Hdfutjt

Condition: used, Year of construction: 2011, Functionality: fully functional, total height: 2,100 mm, total width: 1,600 mm, total length: 1,800 mm, warranty duration: 6 months, TECHNICAL SPECIFICATIONS Csbowalyve Hdfutsgt - Model: GG80/2NPS/6 - Year : 2011 - Output : 3000 bottles/h max - 4 heads - 3 stations - Bottle diameter : 40 min / 120 max - Stepper motor DIMENSIONS - Length : 1800 mm - Width : 1600 mm - Height : 2100 mm

Condition: used, Year of construction: 2015, Overview This can filling line was in operation in a brewery in UK until last. The canning line is still assembled and ready for use. It is no longer in use as investments are being made in a new line.  Technical data  Capacity: 24,000 cph (Filler can do more) Formats:   330 ml 440 ml  40 filling valves Single machines  Can Depalletizer | FIPAL | MINIDEPAL 20 LA | 2015 Infeed at the bottom Discharge on top Includes safety fences, can conveyors 2 Lane Empty Can Rinser | 2015 Can Filler | KHS | Innofill Can DVD 40 | 2015 Can Seamer | Ferrum | F6 | 2014 Can Lid Alimentation | CSW Deventer Holland | Mini-Multifeeder / 54 -MMF-01 | 2015 Can Inspection | Heuft | Spectrum TX | 2015 Can Dryer | Euro Sistemi | TF 01 | 2015 Can Dryer | Euro Sistemi | TF 02 | 2015 Wrap Around Case Packer | Robopac | Prasmatic TC400 compact  | 2022 can be converted to use tray & film Check Weigher | FT System | CP600 TP TUR300 Z200 RAS001 | 2017 Multi Packer | GPI | PQuikflex 300  | 2018 Date Coder | Hitachi | UX | - Ink jet coder Palletiser | FIPAL | Pal 80 F | 2015 Stretch Wrapper | Atlanta | Revolution LS | 2015   Cgobetpv Two Hdfutot

Condition: new, Functionality: fully functional, total height: 3,700 mm, overall weight: 340 kg, warranty duration: 12 months, inner diameter: 1,600 mm, TECHNICAL SPECIFICATIONS - Brand : ARSILAC Cob Hdfowalnaoutjgt - Model : SPAIPSER5000 - Material : 304 stainless steel - Total capacity : 4 880 litres - Bottom: flat sloping, 4% slope - Roof: floating cap - Interior finish : bright annealed - Exterior finish: brushed ROOF - 1 INOX 316L floating cap and complete pneumatic system (stainless steel cover, pump, air chamber, valve) VIROLE - Vacuum lifting rings - 1 gallows - 1 lifting winch - 1 ladder support - 1 rectangular door 420×530 mm at the bottom of the shell, opening outwards - 1 partial drain with 100×100 square flange, 40 MÂCON stainless steel ball valve, stainless steel plug - 1 DIN 15 tasting tap - 1 needle thermometer - 1 complete stainless steel level with tap and stainless steel ruler (polycarbonate tube) - 4 turns of coil with 2.15 m² heat exchange surface on the shell - 2 turns of coil with an exchange surface area of 0.75 m² around the door - Maximum pressure on coil circuit: 1.5 bar - 1 inlet and 1 outlet on the coil circuit, 1‘ 1/4’ male gas connection - 1 connection with immersion sleeve for control probe - 1 identification plate BOTTOM - 1 total drain with square 100x100 flange, stainless steel 40 MÂCON ball valve and stainless steel plug - 3 stainless steel feet, height 500 mm, adjustment screw and plate DIMENSIONS - Diameter: 1600 mm - Sleeve height: 2500 mm - Total height : 3700 mm - Weight : 340 kg - Shell thickness : 15/10ᵉ mm - Curved base thickness: 20/10ᵉ mm

Condition: used, Year of construction: 2016, Overview  This complete filling line for glass bottles was part of a brewery and consists of a filler and capper block, labeler and a carton capper. The entire equipment was built in 2016 and has already been dismantled and stored. Scope of delivery Isobaric Filler & capper | cimec | AM DPS 811G | 2016 Output: 1,200 bph (at 0.33l) Designed for 0.33l glass bottles Labeler | murcia codificacion | MC-220 | 2016 Output: 1,300 bottles/h Adaptable to 1.5L bottles Carton sealer | Siat | SK2 | 2016 Cgobott Um Aj Hdfutjt

Condition: new, Functionality: fully functional, total height: 3,485 mm, overall weight: 565 kg, tank capacity: 8,117 l, warranty duration: 12 months, inner diameter: 2,100 mm, TECHNICAL SPECIFICATIONS - Brand : ARSILAC - Model : STOIPSER7500B - Material : 304 stainless steel - Total capacity : 8 117 litres - Bottom: flat sloping, 4% slope - Roof : centred conical - Interior finish : bright annealed - Exterior finish: brushed ROOF - 1 400 mm diameter lever-operated hatch - 1 tapping with PVC ball vent VIROLE - Lifting rings - 1 ladder support - 1 rectangular door 420×530 mm at the bottom of the shell, opening outwards - 1 partial drain with 100×100 square flange, 40 MÂCON stainless steel ball valve and stainless steel plug - 1 DIN 15 tasting tap - 1 needle thermometer - 1 complete stainless steel level with tap and stainless steel ruler (polycarbonate tube) - 5 turns of coil with an exchange surface of 4.38 m² on the shell - 2 turns of coil with an exchange surface area of 1.23 m² around the door - Maximum pressure on coil circuit: 1.5 bar - 1 inlet and 1 outlet on the coil circuit, 1‘ 1/4’ male gas connection - 1 connection with immersion sleeve for control probe - 1 identification plate BOTTOM - 1 total drain with square 100×100 flange, stainless steel 40 MÂCON ball valve and stainless steel plug - 5 stainless steel feet, 625 mm high, adjustment screw and plate DIMENSIONS - Diameter: 2100 mm Csb Hdfuewall Eetegt - Ferrule height : 2250 mm - Total height : 3485 mm - Weight : 565 kg - Roof thickness : 20/10ᵉ mm - Shell thickness: 15/10ᵉ mm - Bottom thickness: 30/10ᵉ mm

Condition: used, Year of construction: 2003, Overview  This shrink packer SK 600F was built in 2003 by Italian manufacturer SMI. The machine is immediately available, currently dismantled and stored. There are no additional costs for removal.  Technical Details    Capacity: approx. 60 packs/minute (nominal)  Features:   Cans in shrink packs  With printed film  6x4 single-lane  4x3 single-lane  3x2 single-lane  Accessories: 2 roll holders with gluing device  Machine protection: Sliding doors  Shrink tunnel: ST 4000, with 1 fan in the outlet  A film roll trolley can be purchased as an option    Cjb Hdfujt Hzi Rstegt

Condition: used, Year of construction: 2010, Overview  The Octopus film winder was built in Finland in 2010. The machine was in use at a mineral water company until recently and is already dismantled and immediately available.   Technical details   Speed of the motion sequences  Ring up/down 0.15 m/s  Ring rotation 18 rpm  Film insertion 4.5 m/s  Film: LLDE pre-stretched  Hold-down device  Pallet dimensions   ¼ EURO,  ½ EURO,   EURO,   1200 × 1000,   Max. height 2400 mm,   Min. height approx. 50 cm depending on the system settings  Dimensions  Length 2850 mm   Width 2150 mm   Height 3140 mm   Weight 1050 kg   Voltage: 3 × 400 VAC 50 Hz +N+earth  Air pressure 6 bar, 9 l/operating cycle  Cgjb Heuca Amodfutjt

Condition: used, Year of construction: 1998, Overview  This vacuum filler was built in 1998 by Italian manufacturer GAI. In 2024 the machine was fully refurbished and is available immediately.   Technical Details    Effective Capacity: approx. 4,500-5,000 bottles/hour  Machine equipped for the following bottle formats: Bordeaux 75cl (diameter 78mm) - Burgundy 75 - 37.5cl - Magnums  Rinser with 20 clamps, inspected  Filler with 20 taps and vacuum system (new turbine) - taps inspected, new gaskets. New seating springs.  AROL Saturno Capper with 4 heads and vacuum - semi-new jaws in perfect condition - new vacuum pump and circuit  New wine inlet solenoid valve  Plug for feed pump  Machine newly refurbished (solenoid valve, jaws, vacuum turbine, gaskets, vacuum pump)  Electrical supply: 400 Volts / 50 Hz, 3 phases  Dimensions:  Long 380cm x Wide 140cm x High 250cm  Weight: 3500 kg    Csb Hdouch Tmjfutsgt

Condition: used, Year of construction: 2013, Overview The bottle washer was manufactured by the German company Krones in 2013 and put into operation in 2014. It has been serviced annually. In addition, tenside lye cleaning and spare parts can still be purchased. DISMANTLING INCLUDED. Technical data  Capacity: 66,000 bph Maximum bottle diameter 69 mm Set up for the following formats:  Vichy 0,33l Long-Neck 0,33l Long-Neck 0,5l NRW 0,5l  Steinie 0,33l Cgobol Hx Ene Hdfutot

Condition: used, Year of construction: 2016, Overview  The packer was manufactured in 2016 by the former German company Federspiel. It is located at a large German mineral well and is no longer in operation. The packer was removed at that time because it no longer met the performance requirements. Technical details Capacity: 3800 crates/h (at 0,7l)  Formats: 0,25l; 0,5l; 0,7l; 1,0l  Control Siemens S7 Multi gripper head with 2x12x8 grippers Bottle table  Bottle line-up block Cgsbsl Hx E Se Hdfutot

Condition: used, Year of construction: 2021, Overview The packaging machine was manufactured in 2021 by the Italian manufacturer V-Shapes. This compact machine dispenses various products into single sachets between 0.5ml and 25ml. The scope of delivery also includes the printer, which allows the sachets to be produced in-house. The machine can be visited in operation at any time. Technical Data Packaging machine | V-Shapes | PRIME | 2021 Production capacity: Up to 45 units/minute Time for packet size change: 15 minutes Number of packaging lines: 1 Maximum dimensions of film reels: Width 110mm/ 4.33 ” Diameter 250 mm Weight of film reels: 20 kg / 44.09 lb Film reel consumption: Up to 2625 mm /min Standard weld dimensions: 5 mm(± 1 mm) Machine colour: Steel Electronic parts: Standard IP55, IP67 on request Standard electronics: PLC 6 brushless motors                                               *Pneumatic dosage system: volumetric to measure Dimensions of V-Shapes packets: Height from 50 to 100mm/1.969” to 3.937” Width: from 40 to 100mm/1.575” to 3.937” Air Pressure: 7 bar Electric power: 20 Kwh Weight (maximum): 1000 kg / 6612lb Machine Footprint: 1500mm x 1000mm x 1000mm (H) Printer | AstroNova | T2-C | 2022 Print quality: 1600 x 1600 dpi or Print speed: 6 ips (152mm/sec) or 12 ips (300mm/sec) 4 external ink tanks á 2l Dimensions: 606mm x 580mm x 795mm Weight: 60 kg (without material) Cob Hdfol Hx Rdeutogt

Condition: used, Year of construction: 1999, Overview  The machine was built in 1999 by the German manufacturer Anker and is overhauled. The machine has run only a few hours a year and is therefore in good condition.  Technical data  Front label (belly+ chest wet glue), back label (wet glue) Running direction: right - left  Complete documentation  With a new bottle format and 2 new label formats  Freely selectable label dimensions Cjb Hdfuem D Ukmstegt

Condition: used, Year of construction: 1998, Overview This machine was built in 1998 by French manufacturer Sidel. The machine is in very good working condition, is already professionally dismantled and stored in a warehouse. Techn. Details Capacity: 7.200 bph in 1,5L Number of moulds:  6 (molds not included) Equipped with quick change for shell molds Number of heating modules: 10 modules Neck personalization: 29/25      Working hours: 47.000 only         Machine was regularily maintained       Machine equipped with:            Sidel preforms elevator to unscrambler Sidel preforms unscrambler & feeder Sidel oven & blowing wheel for 6 molds Sidel electrical cabinet Sidel PCC drive & control panel Big set of spare parts list upon request Cob Hdsrkgy Uofutjgt

Condition: used, Year of construction: 2002, Overview The blow molder was built in 2002 by the former manufacturer SIG Corpoplast (now KHS). The machine is still in operation and can be visited. Technical data Nominal capacity: 30,000 bottles/h Last used formats: 1.0L (27,000 bph) 1.25L (27,000 bph) 2.0L (22,500 bph) Bottle Volume: 200 - 3,000 ml Max. Diameter: 126 mm Length: 107 - 350 mm Preform Length: 60 - 200 mm Max. Diameter: 48 mm Dimensions (LxWxH): 9,920 mm x 6,279 mm x 3,357 mm Required space: 11,500 mm x 11,300 mm  Weight: 31.15 t Scope of delivery Blomax 20 Preform feeder Air transport Blomax 18 as spare parts dispenser Additional costs for spare parts, dismantling, packing and loading: EUR 45,000 Cjbery Iiws Hdfutogt

Condition: used, Year of construction: 2019, Overview This carbonator from Italian Manufacturer Sfoggia was built in 2019. It has had very little use and is in immaculate condition.   Technical Details Capacity: 2,500 litres per hour Products that can be processed: beer, cider, soft drinks etc. Max. carbonation levels - max pressure: 6 bar Dimensions (LxWxH): 1000mm x 820mm x 2100 mm Weight: 150 kg Cjb Her A S E Hodfutjgt

Condition: used, Year of construction: 1997, Overview The fully automatic KEG plant was manufactured in 1997 by the German manufacturer BTB. The plant cleans the inside and outside of the KEGs and fills them with a capacity of approx. 60 KEGs/h. Technical details Capacity: 60 KEG/ h for 30l DIN KEGs Formats: 10l, 20l, 30l, 50l, DIN or Euro KEGs Fittings: Micromatic flat fitting and Keggyfittng Scope of delivery Cleanomat CL5 with 4 active cleaning stations with 1 filling station Medium pressure external washer 3x supply units á 300l for mixed water, acid & lye Conveyor belts Volumetric filling system Automatic filling via volumeter Automatic filling via pressure transducer CIP cleaning of the CO2 line   Cgeb Hdfustqa Iqstet

Condition: used, Year of construction: 2010, Overview    The brewhouse was built in 2010 by German manufacturer Kaspar Schulz and then expanded in 2014 with additional new equipment. The brewhouse has already been professionally dismantled and is immediately available. The full documentation and layouts are available upon request.   Technical details  Rash wort: 30 hl   Production capacity: Maximum 8 brews in 24 hours  Fully automatized (despite hop dosage)   Steam heated  Gentle-Boil method (SchoKo)   Scope of delivery  2 malt silos   4 roller mill | 800 kg/h   Brewhouse BRAUBLOCK 30 hl   Mash tun  Pre-flow vessel/ lauter tun  Wort kettle/ whirlpool  Hot water tank (HWT) 90 HL   Plate cooler  Wort aeration,   Spent grains pump  Cgob Hdfjuzbb Reutot

Condition: used, Year of construction: 2022, Overview This brewhouse was manufactured in 2022 by Italian company Spadoni. The owner had purchased all the equipment to set up a microbrewery but then decided to shift the production of his beer to a bigger brewery, producing for him. Therefore, the brewhouse has not been used so far. Techn. Details Output: 25-30 hl in one brewing process Dimensions: 4.722mm x 4.401mm x 3.784mm  Brewhouse mounted on stainless steel frame 3 vessels  Mash tun Leuter tun Wort kettle + whirlpool Plate heat exchanger Scope of delivery Grist mill | Bühler AG | Smartgrist | 2022 Steam generator | ABC Perello | PMY - 12 | 2022 | 1900 m³, pressure: 7.8 bar  Water tank | Isma S.A. | 2022 | 50,000l | diameter: 3,000 mm, height: 7,400 mm  Hot water tank | agrovin | 2021 | 15.000 l   Cold water tank | agrovin | 2021 | 15.000 l  10 fermentation tanks | agrovin | 2021  7x 12.500l 3x 15.000l Water softener | 2022 Refrigeration pump | Taeevo Tech | TAE-381-P3 | 2022 Liquid dosing unit | Agrovin | Agatha PRO | 2021 Various pumps, gangway, stairs | 2022 Cgob Hdjuzphrefutot

Condition: used, Year of construction: 2017, Overview The brewhouse was manufactured in 2017 by the Czech company HANSTEEL s.r.o.. With it, 5 hl can be produced. Technical details Two-chamber brewhouse with electric heating system. Nominal volume: 500l Total volume: 550l Brewhouse is mounted on separate frame with stainless steel stairs and platform Incl. cooler from Alfa-Laval: cooling of 500l in 1h from 99°C to 12°C Butterfly valves on the chimneys Agitators in both vessels with frequency converter to change the speed Strainer bucket with level sensor for automatic water refilling control of the brewhouse via a touch screen display accessible from the working platform the app needed to control the brewhouse can be installed on a portable device (e.g. tablet) and the operation of the brewhouse can be controlled remotely There is also a possibility to offer for sale open fermenting vats with a nominal volume of 1000 l (total volume 1200 l). Cgob Houzpiiodfutjt

Condition: used, Year of construction: 2019, Overview    This filling line for returnable glass was installed in 2019 and essentially consists of a bottle washer, rinser/filler and capper block and a labeling system with laser printer. The bottling line is vacant as the previous owner is closing the brewery due to retirement. The bottling process ran smoothly until the end.  The equipment is still installed and connected and can be viewed in person at any time.   Technical details  Capacity: max. 1,500 bph (1,000 bph were actually run)  Bottled product: Beer   Included formats: 0.33l longneck, 0.5l NRW  Closure: Crown cap  Scope of delivery  Bottle washer | SEN | 1989 (overhauled and installed in 2020)  Isobaric filler block | Shandong Yuesheng | 2019   Rinsing positions: 14   Filling positions: 12   Capping positions: 5   With pre-evacuation   Counter-pressure filler incl. 2 formats 0.33 longneck 0.5 NRW  Dry tunnel | Shandong Yuesheng | 2019  Labeler incl. laser printer   Collecting table   Cgjbjuch Tge Hdfutot