Used Beverage production for sale (917)

Condition: used, Year of construction: 2010, Overview   This ARCADE GEL 6 bottle washer was built in 2010 by the German manufacturer GM Gera. The machine is still in operation and can be inspected in person at any time. The ARCADE GEL 6 is fully functional and must be replaced due to an increase in performance.   Technical details   Nominal output: 33,000 bph   Control range: 13,200 - 36,300 bph   Chain pitch: 169 mm   Cell pitch: 110 mm   Bottle cells per row: 30 pieces   Total bottle cells: 7,860 pieces   Bottle cells, loaded: 7,680 pieces   Consumption  Compressed air: 1m³   Steam (operation): 489 kg/ h   Steam (heating): 4,430 kg/ h   Electrical power: 48.4 kW   Water: 7.35 m³/ h   Bath volume   Pre-soak: 2,263 l   Pre-caustic: 7,240 l   Caustic 1: 31,755 l   Caustic 2: 350 l   Hot water 1: 350 l  Hot water 2: 350 l   Cold water: 350 l  Debvdhkst Ul Exsyscg

Condition: used, Year of construction: 1997, Overview   The filling line for cups was built by HAMBA in 1997, is still in operation until the end of 2024 and can be inspected at any time.   Technical data Output: 20 - 40 cycles/min   Products that can be packed:   Liquid yoghurt milk, 0.3 to 4% fat (20-45°C)   Stirred yoghurt with fruit, max. edge length of fruit pieces 15mm, 0.3 to 4% fat (3-10°C)  Cream, 25 to 35% fat (3-42°C)  Salad dressings with salt, herbs and vinegar  Pudding, sweet (2-70°C)  Cup formats:  Cup diameter: 75 mm   Max. Height 120 mm   Filling ranges:   50 ccm to 250 ccm filler with fruit dosing  30 ccm to 150 ccm filler with fruit dosing  Closure: sealing lid   Control Siemens S7   Scope of delivery  Filling machine | HAMBA | BK 8008 A | 1997  Tray erector | Schäfer and Flottmann | SFS 337 | 1997  Empty crate conveyor | Manex | - | 1997  Packer | AF | - | 1997  Integrated in SIG HAMBA BK 8008 P system  Good maintenance condition  Full crate conveyor | Manex | - | 1997  Layer palletizer | Manex | - | 1997 (revision 2004)  Dcebvdot Uw E Dehkyjg

Condition: used, Year of construction: 1999, Overview This SIDEL blow moulder and KHS filling monobloc were both manufactured in 1999. They are still in production until the end of October and can be viewed in person. The special feature of the filler is that it can process carbonated or still mineral water with natural flavors using a micro-dosing unit. The filler (KHS Innofill monobloc) and accumulation table (Sidel AQ) are also available without the blow molder (Sidel SBO 18 Series 2), price on request.  Technical Details Blow moulder | SIDEL | SBO 18 Series 2 | 1999 Current capacity: 23.400 bph in 1.25L Working hours: 40.000            Number of moulds: 18      Moulds type: Shell type quick change Formats produced: 1.25L Bottles: Cylindrical petaloid base Oven type: Sidel Neck personalization: PCO 1881  Type of preforms: with recycled PET resin Machine was regularly maintained     Machine equipped with:            Sidel preform tipper Sidel hopper with cover & feeder Sidel preforms unscrambler Sidel preforms infeed rail Blowing station for 18 moulds Sidel electrical cabinet with Siemens Sidel PCC drive & control Lanfranchi bottles buffer storage silo            Unscrambler and air conveyor system with drive to the entry KHS monobloc Supplied with all format & spare parts available Rinser, Isobarometric Filler, Capper Monobloc | KHS, Zalkin | VK-E 40/50/10/S PET | 1999 (low working hours) Filling carbonated mineral water and also carbonated mineral water with natural flavours Processing: PET bottles 1,25L & 0.50L cylindrical petaloid base Bottle neck: PCO28 1881 Current capacity: 23.400 bph Number of rinsing nozzles (KHS Innoclean): 40 Number of filling valves (KHS Innofill): 50 Number of capping stations (Zalkin): 16 Including also micro-dosing unit Perrier for natural flavours With caps magazine & elevator Accumulation table Gebo Sidel type AQ file Dynamic accumulation and buffer between the filler outlet and the labeller inlet, avoids untimely stops upstream (filler, blow-moulder) due to the labeller Debverqar Sodhkyscg

Condition: used, Year of construction: 2007, Overview  The filling line for gable top packaging was manufactured in 2008 by the Norwegian company Elopak. It consists of a carton filler, cap applicator, and packer. The filling line is still installed, but no longer connected. However, it can be inspected in person. Technical Details  Capacity: 8,000 cartons/ h Formats: 0,5l 0,75l 1,0l Operating hours: 32,500 Scope of Delivery  Aseptic Carton Filler | Elopak | S-PS80HA | 2008 3x Cap Applicator | Elopak | PLA-S30 | 2009 Tray Packer | OYSTAR A+F | Traypacker TF | 2011 Dcsbvsty Ddxedhkysg

Condition: used, Year of construction: 2016, Overview  This labeller and atmospheric filler with capper were both manufactured in 2016. The filler is from Italian manufacturer Alfatek and the labeller is from Spanish manufacturer ENOS. The machines are for sale because the owner has switched his production to KEGs and therefore no longer needs it. The machines are installed and operative in the owner's factory, as shown in the photos. It can be visited and tested in person. Technical details  Filler & Capper | Alfatek | MBC 7/1 LP | 2016 Capacity: 1,000 bph with 0,75l 7-valve filling at 1 bar Filling with inert gas (such as CO2 or N2) to eliminate oxygen Crown capper with single-head adapters for 26 mm and 29 mm Certified as atmospheric Formats used: 0.33l, 0.5l, and 0.75 liters Dimensions of the filling machine: 180cm long 120cm wide 220cm high Labeller | Enos | Compatta | 2016 Capacity: 1,800 bph with shrinking head 1,200 bph with rolling head Automatic lot and expiry date printer by ZANASSI 3 label stations (Front, Back, Neck) Dimensions of the labeling machine: 200cm long 130cm wide 180cm high Dsbvdjtzg Ihshkyocg

Condition: used, Year of construction: 2012, Overview The crater & decrater Linapac II was built in 2012 by German manufacturer Krones. The column was replaced by a new one in April 2021. Techn. Details Formats 3x4 (0,75 lt – 1,00 lt) 4x5 (0,5 lt) 6x12 picking heads Automatic format change Dsbou Huykovdhkyecg

Condition: used, Year of construction: 1998, Overview This This tumbler, type: Dorit VV-7-2000-B is the perfect massaging unit. Ideal unit for butcher, shops or restaurants and hotels, as well as units for medium and large industrial processors. Technical details Output: approx. 1000 kg/h (depends on the product) Scope of delivery Tumbler | VV-7-2000-B | Dorit | 1998 Dcobvdhkjuwz Hloyeg

Condition: used, Year of construction: 2006, Overview This bread roll machine, type: Kemper Quadro Roll was built 2006 in Germany. The divider allows you to form dough of various shapes and sizes. The most important features of the device: Capacity: 6,000 pieces/h Number of rows: 5 Product: round or square Dough dividing range: 40 - 150 g (square rolls), 40 - 100 g (round rolls) working width 800mm Integration: Possibility of connecting the machine with the soaking and sprinkling station and the putting table. Technical Details 5 rows 400V/ 50Hz Scope of delivery Bread roll machine | Kemper | Quadro Round | 2006 Dobvjvq N Elodhkyscg

Condition: used, Year of construction: 2019, Overview  The inspector “Linos S2” was manufactured in 2019 by the German manufacturer Loell. The machine was regularly maintained by OEM and is still in operation. As the brewery is stopping the production on this line, they are no longer in need of this machine. Tech. Details Running direction: left-right Detections: Bottom inspection camera Sealing surface inspection camera Sidewall inspection camera Residual liquid and residual caustic detection Thread inspection Formats: 0,33 l Longneck (brown/green/white) 0,5l NRW (brown with crown cork) 0,5l NRW (white with thread) 0,5l Euro (brown) 0,33l Euro (brown) 0,33l Vichy (brown) 0,33l Gourmet Scope of delivery  Ejector after machine Djbvdhsvlxfqskyecg

Condition: used, Year of construction: 2005, Overview This automatic 14 needle injector, type: P14 was built in 2005 in Switzerland Smallest automatic units with 14 needles in 2 rows For better economic efficiency in small and medium-sized companies Repeatable accurancy on injecting with single neelde valve control Manual feed rate adjustment Construction: Completely stainless-steel, fully isolated. Technical Details Length/ width/ height: 1200 mm 450 mm 1800 mm Power: 0.75 kW Max product height: 180 mm Max product width: 280 mm Scope of delivery Automatic needle injector| Pökomat | P14| 2005 Dcobvdhksvttf Ujyjg

Condition: used, Year of construction: 2012, Overview This labeling machine, type: Novexx Solutions ALS 206 was built in 2012 and ws used for carton-labeling. With this solution, labels with a width of from 10 – 156 mm (material width incl. carrier material max. 160 mm) on the side of products become. The surface of the product must be flat in order to ensure uniform label application. It Paper and rigid PE label materials can be used become. The maximum dispensing speed is 30 m/min. The tripod with the vertical and horizontal Adjustable spindle allows flexible integration into a Assembly line system. The product sensor must be connected to the M12 connector of the ALS. Top labeler and bottom labeler printing unit with infeed and outfeed belt. Upper unit model ALS 206, subunit ALX 924/5. Can be supplied with computer and label machine for cardboard labels. Incl. tripod. The subway labeller was new 2 years ago. It is an overhoult device. Technical Details Dispensing speed: Up to 30 m/min Material width incl. material carrier: 10 - 160 mm Label length: 5 - 600 mm Label roll diameter: up to 300 mm Data interfaces: RS 232C, Ethernet, USB Scope of delivery Top labeler | Novexx Solutions | ALS 206 | 2012 Bottom labeler | Novexx Solutions | ALX 924/5 | 2022 Dcsbvdovrfh Eehkyog

Condition: used, Year of construction: 2008, Overview This cup filling machine was built in 2008 by the German manufacturer Ampack. The machine was last used by a dairy company, is in a well-maintained condition and is available immediately. Technical details Output: approx. 8,000 cups/hour Dosing units (servo-controlled): Pre-doser: 20 -250 ml Main doser: (80)100 -600 ml Cerialiser (tbd): 5-60 grams Free dosing space Current format sets 4 - corner ZKB, 8 - corner ZKB, round ZKB Control system: Siemens S7 Weight: approx. 25 tonnes Further information, pictures, and videos of the machine on request. Debvdovn Txqohkyjcg

Condition: used, Year of construction: 1997, Overview  This cup filling machine was built in 1997 by the German manufacturer Ampack. The machine was in use until recently at a dairy company, is in a well-maintained condition and is available immediately. Please note that the machine is without control cabinets, tray erector and X-Ray. Technical details  Output: approx. 19,200 cups/hour (40 cycles/min on 8 lanes) 2 fillers: yoghurt + fruit/ rice pudding Control system: Siemens S5 Weight: approx. 11 tons Further information, pictures and videos of the machine on request Debvdovn Tyzjhkyecg

Condition: used, Year of construction: 1999, Overview  The machine was built in 1999 by the German manufacturer Anker and is overhauled. The machine has run only a few hours a year and is therefore in good condition.  Technical data  Front label (belly+ chest wet glue), back label (wet glue) Running direction: right - left  Complete documentation  With a new bottle format and 2 new label formats  Freely selectable label dimensions Dobvdhom D Ukmjkyscg

Condition: used, Year of construction: 1992, Overview This blowmoulder was built in 1992 from French manufacturer Sidel. It can produce up to 4.000 bottles per hour. Techn. Details Capacity: 4.000 bph 4 cavities Scope of delivery Blowmoulding machine | SIDEL | SBO 4/6 | 1992 Preform feeder Two types of molds for 1.5 L and 2.0 L bottles Cooling unit: RIEDEL Dsbvdenpbhvehkyocg

Condition: used, Year of construction: 2017, Overview The CIP system from Diversey is used for stationary cleaning of filling machines and processing equipment in the beverage industry. This unit was developed between 2015 and 2017 and is now for sale as the customer quit the purchasing contract. Therefore it was not in use. It is properly stored and can be installed and implemented into an existing circuit by Diversey technicians. Furthermore there is the possibility to adapt the P&ID to the customer's needs. The CIP unit itself has no operator panel, as it will be implemented as slave system into the controle of a filling machine or other machine to be cleaned. It can be connected to an  Allen Bradley control system. It is installed in a stainless steel base frame and has a 500l tank. There are four pumps for the dosing of cleaning and disinfection media. Furthermore there is a heat exchanger heated by steam. In addition there are several measurement devices for temperature, flow rate, filling level and conductivity Tech Specs: Base frame stainless steel Control: can be connected to Allen Bradley control CIP pumpcapacity: 20 m^3/h Tank volume: 500l Number of dosing pumps: four Measurement devices: Temperature Flow rate Filling level Conductivity Features: Suitable for the cleaning of fillers, flash pasteurisers, mixers, syrup rooms as well as piping systems and tanks P&ID can be modified Dosing pumps from Prominent CIP Pump: Hilge Hygia 50/50/5,5/2 Dcebvdhel Hxlyskyog

Condition: used, Year of construction: 1990, Overview The filler was manufactured in 1990 by the German manufacturer Nagema. It was completely overhauled/modernised and also equipped with a new control system in 2022. With the double pre evacuation system it is suitable for beer also besides other carbonated drinks. After the overhauling of the machine, it has not yet been used again. It was planned for a brewery project, where the owner now decided to shift his production to a contract bottler. Therefore the machine is now available for sale. It is properly stored in a warehouse. Technical Specification: Capacity: 9000 bph on 330 ml Number of filling valves: 40 Number of capping elements: 10 Formats: 330 ml and 500 ml Products: beer and CSD Control: Siemens S7 with touch panel Dcsbsl Hxmhevdhkyog

Condition: used, Year of construction: 2006, Overview The BLOMAX 4 blow molder was manufactured by the German company SIG Corpoplast (now KHS) in 2006. It has been overhauled by a machine builder and can be inspected in dry operation. Blow molds are not included, but can be obtained.  Technical details  Output: up to 7,200 bph 4 cavities Dimensions: 4960 mm x 3900 mm x 3000 mm  Weight: 15 t  Operating hours: 44.736  Bottles Volume: 200 ml - 2000 ml   Max. Diameter: 115 mm  Max. Length: 350 mm Preforms  Length: 60 - 200 mm Max. Support ring diameter: 35 mm  Scope of delivery  Blow molder is completely equipped with the system for preform feeding (silo, elevator, sorting, chute) Debvdol Hxpkjhkyocg

Condition: used, Year of construction: 2001, Overview The KSB3000 blowing machine was manufactured in 2001 by the Austrian machine builder KOSME. It is located at a machine builder and can be visited in dry run to see the functionality of the machine.  Technical details  Capacity: 3.600 bph  3 cavities Dimensions (LxWxH): 6830 mm x 2860 mm x 2450 mm  space requirement approx. 9x5 m²  weight: 4,5 t  Operating hours: 19.935   Bottles Volume: 250 ml - 2500 ml   Max. Diameter: 110 mm  Scope of delivery  Blow molding machine is completely equipped with the system for preform feeding (the silo, the preform elevator, the preform aligner and the preform infeed). Dsbvdhksl Hxproyocg

Condition: used, Year of construction: 2013, Overview The bottle washer was manufactured by the German company Krones in 2013 and put into operation in 2014. It has been serviced annually. In addition, tenside lye cleaning and spare parts can still be purchased. DISMANTLING INCLUDED. Technical data  Capacity: 66,000 bph Maximum bottle diameter 69 mm Set up for the following formats:  Vichy 0,33l Long-Neck 0,33l Long-Neck 0,5l NRW 0,5l  Steinie 0,33l Dcobvsl Hx Ensdhkyog

Condition: used, Year of construction: 2016, Overview  The packer was manufactured in 2016 by the former German company Federspiel. It is located at a large German mineral well and is no longer in operation. The packer was removed at that time because it no longer met the performance requirements. Technical details Capacity: 3800 crates/h (at 0,7l)  Formats: 0,25l; 0,5l; 0,7l; 1,0l  Control Siemens S7 Multi gripper head with 2x12x8 grippers Bottle table  Bottle line-up block Dcebvdsl Hx E Sohkysg

Condition: used, Year of construction: 2021, Overview The packaging machine was manufactured in 2021 by the Italian manufacturer V-Shapes. This compact machine dispenses various products into single sachets between 0.5ml and 25ml. The scope of delivery also includes the printer, which allows the sachets to be produced in-house. The machine can be visited in operation at any time. Technical Data Packaging machine | V-Shapes | PRIME | 2021 Production capacity: Up to 45 units/minute Time for packet size change: 15 minutes Number of packaging lines: 1 Maximum dimensions of film reels: Width 110mm/ 4.33 ” Diameter 250 mm Weight of film reels: 20 kg / 44.09 lb Film reel consumption: Up to 2625 mm /min Standard weld dimensions: 5 mm(± 1 mm) Machine colour: Steel Electronic parts: Standard IP55, IP67 on request Standard electronics: PLC 6 brushless motors                                               *Pneumatic dosage system: volumetric to measure Dimensions of V-Shapes packets: Height from 50 to 100mm/1.969” to 3.937” Width: from 40 to 100mm/1.575” to 3.937” Air Pressure: 7 bar Electric power: 20 Kwh Weight (maximum): 1000 kg / 6612lb Machine Footprint: 1500mm x 1000mm x 1000mm (H) Printer | AstroNova | T2-C | 2022 Print quality: 1600 x 1600 dpi or Print speed: 6 ips (152mm/sec) or 12 ips (300mm/sec) 4 external ink tanks á 2l Dimensions: 606mm x 580mm x 795mm Weight: 60 kg (without material) Dsbvol Hx Rdodhkyecg

Condition: used, Year of construction: 2019, Overview   The machine was manufactured in 2019 by the American manufacturer CODI. Most recently, it was used to can flavored and carbonated mineral water. The machine has already been disassembled.  Techn. details  Capacity: 3.000 cans/ h  Formats  0.33 l standard  0,44 l Standard 0,33l Sleek  Volume of the filling tank: 64,2 l Voltage: 400-500 VAC  Frequency: 50-60 Hz Load current: 13 A  Dcobvdhopzk Ahekyeg

Condition: used, Year of construction: 2007, Overview The filler was built in 2007 by the German company Krones. The machine has been regularly serviced, is still assembled and can be inspected at any time. Technical details Output: 40,000 bph (200 ml) Formats: 200 ml glass bottle 237 ml glass bottle Closure: crown cap Running direction: counterclockwise Inlet/outlet height: 1,150 mm +- 50 mm Filling points: 96 Capping points: 15 Pitch circle diameter: 2,880 mm Pitch: 94 mm Control system: Siemens S7 Energy consumption: 15.17 kW Dcobsqqz Txevdhkyeg

Condition: used, Year of construction: 1998, Overview This machine was built in 1998 by French manufacturer Sidel. The machine is in very good working condition, is already professionally dismantled and stored in a warehouse. Techn. Details Capacity: 7.200 bph in 1,5L Number of moulds:  6 (molds not included) Equipped with quick change for shell molds Number of heating modules: 10 modules Neck personalization: 29/25      Working hours: 47.000 only         Machine was regularily maintained       Machine equipped with:            Sidel preforms elevator to unscrambler Sidel preforms unscrambler & feeder Sidel oven & blowing wheel for 6 molds Sidel electrical cabinet Sidel PCC drive & control panel Big set of spare parts list upon request Dcsbvderkgy Uohkysg