Used Cantilever racks for sale (94)
Sort results
- Lowest price Highest price
- Newest listings Oldest listings
- Shortest distance Farthest distance
- Newest year of manufacture Oldest year of manufacture
- Latest update Oldest update
- Manufacturer A to Z Manufacturer Z to A
- Relevance
- Lowest price
- Price
- Highest price
- Price
- Newest listings
- Release date
- Oldest listings
- Release date
- Shortest distance
- Distance
- Farthest distance
- Distance
- Newest year of manufacture
- Year of construction
- Oldest year of manufacture
- Year of construction
- Latest update
- Update
- Oldest update
- Update
- Manufacturer A to Z
- Manufacturer
- Manufacturer Z to A
- Manufacturer
- designation from A to Z
- Description
- designation from Z to A
- Description
- Model from A to Z
- Model
- Model from Z to A
- Model
- Lowest reference
- Ref.No.
- Highest reference
- Ref.No.
- Shortest runtime
- Runtime
- Longest duration
- Runtime
- Relevance
- Relevance
Material handling Storage racks Cantilever racks
Listing

1,355 km
Cantilever rack
Kragarmregal einseitig mit DachträgerHöhe 4,2 m / Tiefe 1,2 m / Länge 11,5 m
Call
Condition: as good as new (ex-display), Year of construction: 2024, Cantilever rack with roof support: Hot-dip galvanized screw system
Scope of delivery:
7 rack supports, height 4,230 mm with foot section, usable depth 1,200 mm
21 cantilevers with 1,200 mm usable depth, with deflector
7 roof supports with 1,500 mm projection, pre-drilled for on-site roof construction
(*Without wooden purlins and trapezoidal sheets for the roof construction)
Including longitudinal and diagonal braces for 1,900 mm stand spacing
Incl. fastening material (without ground anchors)
- (*Delivery time approx. 1 week)
- (*No damaged parts!)
- (*Reorder spare parts and extension possible at any time)
- (*Offer available in larger quantities: approx. 50 stands in stock)
Detailed description:
- Stable steel construction made of IPE profiles
- Surface of all components hot-dip galvanized
- Load capacity per stand 2,700 kg plus roof, wind and snow loads
(Maximum snow load 1.85 kN/m² and wind load zone 2)
- Load capacity per cantilever arm 900 kg
- including roof support (Maximum snow load 1.85 kN/m² and wind load zone 2)
- Cantilever arms height adjustable in 100 mm increments
- 3 screwable cantilever arms per stand with a depth of 1,200 mm, with deflectors
= 4 storage levels one above the other
Gedpfxoh R Taqe Ag Neuh
- Including longitudinal and diagonal braces with 1,900 mm axle spacing
- Shelf length: 11,500 mm
- Including fastening material (without ground anchors)
- With assembly instructions and load plates C4 in accordance with DIN standard
- Expert advice by telephone
- Made in Germany
- Short delivery time
- Collection on site possible
Our cantilever racks are produced exclusively in Germany.
We offer reliable freight with registration before delivery.
The material is packed sensibly to enable easy unloading.
The subsurface must be made of concrete, level, dowel-capable and able to bear the loads. The customer must check and ensure that the soil condition and load-bearing capacity as well as any official permits required are obtained.
The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended.
According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm from the top edge of the stand.
Listing

1,245 km
Cantilever rack support arm trolley
Jungheinrich Kongamek
Call
Condition: new, Year of construction: 2022, Jungheinrich, Kongamek support arm trolley
Drying boards for carpenters or joiners
Jungheinrich article number: 167793-4A
several available
3 packages, can be sent
14 layers
Support arm diameter 20mm
Installation height 1770mm
External dimensions height 1960mm and length 1520mm
Frame width and external dimensions depth 860mm
Gusdpfxevntzxs Ag Noh
Load capacity per level 20kg
Own weight 73mm
Delivered disassembled
Listing

1,430 km
Cantilever racking OHRA 3 m high
Kragarmregal OHRA 3m HöheAusleger 800 kg
Call
Condition: good (used), Cantilever rack OHRA 3 m high
Over 100 m in stock, see pictures.
Height 3 m high
Boom 100 cm
Load capacity/boom 800 kg
4,5 running meters, 4 pcs. uprights with outrigger
Negotiation price: € 2.160,-- /net
Offer consists of:
4 pcs. uprights with foot 3 m high
4 adjustable outriggers, each upright 100 cm, load capacity 800 kg/outrigger.
Diagonal braces, stiffeners and distances are included.
Frame spacing 150 cm
Load capacity per upright per side 3.200 kg
Height of 2.5 m, 4 m or 6 m available
Gsdpfxscd Dwyo Ag Neuh
Other composition on request:
Constantly over 3000 running meters of pallet racks
from numerous manufacturers in stock.
Transport and assembly available on request.
(Changes and errors in the technical data, specifications and prices
and prices and subject to prior sale! See our terms and conditions, all prices excl. VAT ex stock)
Purchase / Sale We are constantly looking for, or offer numerous items from various fields
broom-clean business evacuations
Business resolutions
Fast - flexible - ready to hit!
We clear and - or dispose also for liquidators. Write us with some keywords, we will contact you immediately.
To get to our site
please click on our logo!

Get information now
+44 20 806 810 84
+44 20 806 810 84
List now
*per listing / month
Listing

2,410 km
Rafturi cantilever pentru depozitare
Modern Expo
Call
Condition: new, Year of construction: 2025, Cantilever Racks – The Ideal Solution for Storing Long and Heavy Goods
Cantilever racks are specially designed for the efficient storage of bulky and heavy products such as pipes, timber, metal profiles, oversized pallets, and other irregularly shaped materials.
Key Features:
• Robust construction
• Adjustable arms for maximum storage flexibility
• Easy access and optimal organization of goods
• Suitable for heavy loads and large-sized products
• Modular design, easy to expand according to warehouse needs
Benefits:
• Maximizes horizontal storage space
Guedpfxew S Ttye Ag Njh
• Reduces handling time
• Enhances safety and efficiency in storage
Ideal for industrial warehouses, workshops, factories, and logistics centers.
Price varies depending on model and size!
Listing

1,794 km
Cantilever
CZ Hersteller
Call
Condition: new, Cantilever racking is ideal for storing long goods such as pipes, bars or plates. The uprights and profiles of our cantilever racks are made of particularly resilient, hot-formed IPE profiles. The racking rows are of any length and can be used on one or both sides.
Cantilever racking is relatively easy to install and reconfigure. With the absence of actual shelving, adjusting the height and angle of the arms is simple and quick. This flexibility in shelving allows you to store a variety of loads.
If you need shelves or accessories in other configurations or designs, please contact us.
We offer a comprehensive range of new and used shelving and accessories
as well as accessories and are happy to support you in your planning.
Further accessories like for example:
Frame, corner and collision protection, push-through protection, chipboard, grids, rear wall grids, depth bars available.
Shipping:
Gjdpodmkv Hsfx Ag Njuh
Please enquire about freight costs, stating your postcode and location, as well as the desired item quantity.
Further service offers:
Planning, shelf assembly/disassembly, purchase/sale.
Changes and errors in the technical data, information and prices and subject to prior sale!
Listing

1,910 km
Cantilever Structure
Call
Condition: used, total height: 9,000 mm, Double-Sided Cantilever
Gjdpfx Agewq Nive Njuh
• Height: 9 m
• Maximum load capacity per column front: 8,100 kg
• Maximum load capacity per arm: 900 kg each
Listing

1,355 km
Cantilever rack
Kragarmregal einseitig Höhe: 4.160 mmNutztiefe: 1.200 mm / Länge: 4.000 mm
Call
Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design
Scope of delivery:
4 rack uprights, height 4,160 mm with foot section, 1,200 mm usable depth
12 cantilevers with 1,200 mm usable depth, standard
Longitudinal and diagonal struts for 4,000 mm rack length (distance 1,300 mm)
Fastening material (screws, nuts and washers)
- (*Delivery time approx. 1 week)
Godpfxomhhf Se Ag Nouh
- (*No damaged parts!)
- (*Reorder spare parts and extension possible at any time)
- (*Offer available in larger quantities: approx. 90 uprights in stock)
Detailed description:
- Stable steel construction made of IPE profiles (screw system)
- Surface hot-dip galvanized
- Rack height 4,160 mm
- Load capacity per upright 2,250 kg
- Foot section and cantilever arms with 1,200 mm Usable depth
- Cantilever arms height adjustable in 100 mm increments
- 3 screwable cantilever arms per stand, standard (= 4 storage levels)
- Load capacity per cantilever arm 750 kg
- Including longitudinal and diagonal braces for 1,300 mm spacing
- Shelf length = 4,000 mm
- Including fastening material (without ground anchors)
- With assembly instructions and C4 load plates in accordance with DIN standard
- Expert advice by telephone
- Made in Germany
- Short delivery time
- On-site collection possible
Our cantilever racks are manufactured exclusively in Germany.
We offer reliable freight with registration before delivery.
The material is packed sensibly to enable easy unloading.
When installed outdoors, the load-bearing capacity is reduced by the wind and snow load.
The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained.
The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended.
According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.
Listing

1,430 km
Cantilever Rack
Kragarmregal Ohra6 m hoch 900 kg/Ausleger
Call
Condition: new, OHRA cantilever rack
Negotiated price: € 5.940,00 net ex stock
You are bidding on a rack with a length of 7.5 m, consisting of
6 uprights with base, 6 m high
+ 4 adjustable outriggers per upright (120 cm), load capacity 900 kg/outrigger.
Diagonal bracing, stiffeners and spacers are included.
Bridges, grids and chipboards are available separately at an extra charge!
Frame spacing 150 cm
Arm length / outrigger 120 cm
Load capacity 900 kg / outrigger
Load capacity per upright per side 3,600 kg
Over 100 meters available.
Heights of 2.5 m, 3 m or 4 m available.
Other combinations on request.
Godpsby Uunsfx Ag Nsuh
(Subject to changes and errors in the technical data, specifications
and prices as well as prior sale reserved! See our GTC, all prices excl. VAT ex stock)
Purchase / Sale We are constantly looking for or offering numerous items from various areas
Machines from all industries
Remaining stock
Special items
swept clean company clearances
Business liquidations
Purchase of remaining stock
Fast - flexible - ready for action! We also clear and or dispose of for liquidators.
Write to us with a few keywords and we will get back to you as soon as possible.
Listing

1,355 km
Cantilever rack
4 Stück Kragarmregal-Ständer einseitigHöhe: 4,16 m / Tiefe: 1,2 m / Länge: 4 m
Call
Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design
Scope of delivery:
4 shelf uprights, height 4,160 mm with foot section, 1,200 mm usable depth
12 cantilevers with 1,200 mm usable depth, standard
Longitudinal and diagonal struts for 4,000 mm shelf length (distance 1,300 mm)
Fastening material (screws, nuts and washers)
- (*Delivery time approx. 1 week)
- (*No damaged parts!)
- (*Reorder spare parts and extension possible at any time)
- (*Offer available in larger quantities: approx. 90 uprights in stock)
Detailed description:
- Stable steel construction made of IPE profiles (screw system)
- Surface hot-dip galvanized
- Shelf height 4,160 mm
- Load capacity per upright 2,250 kg
- Foot section and cantilever arms with 1,200 mm Usable depth
- Cantilever arms height adjustable in 100 mm increments
- 3 screwable cantilever arms per stand, standard (= 4 storage levels)
- Load capacity per cantilever arm 750 kg
- Including longitudinal and diagonal braces for 1,300 mm spacing
- Shelf length = 4,000 mm
- Including fastening material (without ground anchors)
- With assembly instructions and C4 load plates in accordance with DIN standard
- Expert advice by telephone
- Made in Germany
- Short delivery time
- On-site collection possible
Our cantilever racks are manufactured exclusively in Germany.
We offer reliable freight with registration before delivery.
The material is packed sensibly to enable easy unloading.
When installed outdoors, the load-bearing capacity is reduced by the wind and snow load.
The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained.
The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended.
According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.
Gusdsd Tqalepfx Ag Neh
Listing

1,355 km
Cantilever rack
4 Stück Kragarmregal-Ständer einseitigHöhe 3,5 m / Nutztiefe 1,2 m / Länge 4 m
Call
Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design
Scope of delivery:
4 rack stands, height 3,500 mm with base section 1,200 mm
12 cantilevers with 1,200 mm usable depth, standard
Including longitudinal and diagonal braces for 1,300 mm axle spacing
Incl. fastening material (without ground anchors)
- (*Delivery time approx. 1 week)
- (*No damaged parts!)
- (*Reorder spare parts and extension possible at any time)
- (*Offer available in larger quantities: approx. 40 stands in stock)
Detailed description:
- Stable steel construction made of IPE profiles (screw system)
- Hot-dip galvanized surface
- Rack height 3,500 mm
- Load capacity per stand 2,250 kg
- Base section and cantilevers with 1,200 mm usable depth
- Cantilevers in 100 mm increments height adjustable
- 3 screwable cantilever arms per stand, standard (= 4 storage levels)
- Load capacity per cantilever arm 750 kg
- Including longitudinal and diagonal braces for 1,300 mm spacing
- Shelf length = 4,000 mm
- Including fastening material (without ground anchors)
- With assembly instructions and load plates C4 in accordance with DIN standard
- Expert advice by telephone
- Made in Germany
- Short delivery time
- Collection on site possible
Gusdpfx Agsfdkb Ue Nsh
Our cantilever racks are produced exclusively in Germany.
We offer reliable freight with registration before delivery.
The material is sensibly packed to enable easy unloading.
When installed outdoors, the load-bearing capacity is reduced by the wind and snow load.
The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer.
The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended.
According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.
Listing

1,355 km
Cantilever rack
4 Stück Kragarmregal-Ständer einseitigHöhe 3 m / Nutztiefe 1,2 m / Länge 4 m
Call
Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design
Scope of delivery:
4 rack stands, height 3,000 mm with base section 1,200 mm
12 cantilevers with 1,200 mm usable depth, standard
Including longitudinal and diagonal braces for 1,300 mm axle spacing
Incl. fastening material (without ground anchors)
- (*Delivery time approx. 1 week)
- (*No damaged parts!)
Gedpfsfdkbhjx Ag Njuh
- (*Reorder spare parts and extension possible at any time)
- (*Offer available in larger quantities: approx. 50 stands in stock)
Detailed description:
- Stable steel construction made of IPE profiles (screw system)
- Hot-dip galvanized surface
- Rack height 3,000 mm
- Load capacity per stand 2,250 kg
- Base section and cantilevers with 1,200 mm usable depth
- Cantilevers in 100 mm increments height adjustable
- 3 screwable cantilever arms per stand, standard (= 4 storage levels)
- Load capacity per cantilever arm 750 kg
- Including longitudinal and diagonal braces for 1,300 mm spacing
- Shelf length = 4,000 mm
- Including fastening material (without ground anchors)
- With assembly instructions and load plates C4 in accordance with DIN standard
- Expert advice by telephone
- Made in Germany
- Short delivery time
- Collection on site possible
Our cantilever racks are produced exclusively in Germany.
We offer reliable freight with registration before delivery.
The material is sensibly packed to enable easy unloading.
When installed outdoors, the load-bearing capacity is reduced by the wind and snow load.
The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer.
The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended.
According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.
Listing

1,355 km
Cantilever rack
Kragarmregal einseitig Höhe: 2.600 mmNutztiefe: 1.000 mm / Länge: 4.000 mm
Call
Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design
Scope of delivery:
4 shelf uprights, height 2,600 mm with foot section, 1,000 mm usable depth
12 cantilevers with 1,000 mm usable depth, standard
Including longitudinal and diagonal braces for 1,300 mm spacing
Fastening material (screws, nuts and washers)
- (*Delivery time approx. 1 week)
- (*No damaged parts!)
- (*Reorder spare parts and extension possible at any time)
- (*Offer available in larger quantities: approx. 40 uprights in stock)
Detailed description:
- Stable steel construction made of IPE profiles (screw system)
- Hot-dip galvanized surface
- Shelf height 2,600 mm
- Load capacity per upright 1,800 kg
- Foot section and cantilever arms with 1,000 mm usable depth
Cantilever arms in Height adjustable in 100 mm increments
- 3 screwable cantilever arms per stand, standard (= 4 storage levels)
- Load capacity per cantilever arm 600 kg
- Including longitudinal and diagonal braces for 1,300 mm spacing
- Shelf length = 4,000 mm
- Including fastening material (without ground anchors)
- With assembly instructions and C4 load plates in accordance with DIN standard
- Expert advice by telephone
- Made in Germany
- Short delivery time
- On-site collection possible
Our cantilever racks are manufactured exclusively in Germany.
We offer reliable freight with registration before delivery.
Guodpfx Ajmhhyajg Noh
The material is sensibly packed to enable easy unloading.
When installed outdoors, the load-bearing capacity is reduced by the wind and snow load.
The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer.
The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended.
According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.
Listing

1,355 km
Cantilever rack
Kragarmregal einseitig Höhe: 3.000 mmNutztiefe: 1.200 mm / Länge: 4.000 mm
Call
Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design
Scope of delivery:
4 shelf uprights, height 3,000 mm with foot section, 1,200 mm usable depth
12 cantilevers with 1,200 mm usable depth, standard
Including longitudinal and diagonal braces for 1,300 mm spacing
Fastening material (screws, nuts and washers)
- (*Delivery time approx. 1 week)
- (*No damaged parts!)
- (*Reorder spare parts and extension possible at any time)
- (*Offer available in larger quantities: approx. 40 uprights in stock)
Detailed description:
- Stable steel construction made of IPE profiles (screw system)
- Hot-dip galvanized surface
- Shelf height 3,000 mm
- Load capacity per upright 2,250 kg
- Foot section and cantilever arms with 1,200 mm usable depth
Cantilever arms in Height adjustable in 100 mm increments
- 3 screwable cantilever arms per stand, standard (= 4 storage levels)
- Load capacity per cantilever arm 750 kg
Gsdpfx Asmhhx Isg Neuh
- Including longitudinal and diagonal braces for 1,300 mm spacing
- Shelf length = 4,000 mm
- Including fastening material (without ground anchors)
- With assembly instructions and C4 load plates in accordance with DIN standard
- Expert advice by telephone
- Made in Germany
- Short delivery time
- On-site collection possible
Our cantilever racks are manufactured exclusively in Germany.
We offer reliable freight with registration before delivery.
The material is sensibly packed to enable easy unloading.
When installed outdoors, the load-bearing capacity is reduced by the wind and snow load.
The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer.
The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended.
According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.
Listing

1,355 km
Cantilever rack
4 Stück Kragarmregal-Ständer einseitigHöhe 2,6 m / Nutztiefe 1 m / Länge 4 m
Call
Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design
Scope of delivery:
4 rack stands, height 2,600 mm with base section 1,000 mm
12 cantilevers with 1,000 mm depth, standard
Including longitudinal and diagonal braces for 1,300 mm axle spacing
Guedpfsd Tbbdox Ag Neh
Incl. fastening material (without ground anchors)
- (*Delivery time approx. 1 week)
- (*No damaged parts!)
- (*Reorder spare parts and extension possible at any time)
- (*Offer available in larger quantities: approx. 90 stands in stock)
Detailed description:
- Stable steel construction made of IPE profiles (screw system)
- Hot-dip galvanized surface
- Rack height 2,600 mm
- Load capacity per stand 1,800 kg
- Base section and cantilevers with 1,000 mm usable depth
- Cantilevers in 100 mm increments height adjustable
- 3 screwable cantilever arms per stand, standard (= 4 storage levels)
- Load capacity per cantilever arm 600 kg
- Including longitudinal and diagonal braces for 1,300 mm spacing
- Shelf length = 4,000 mm
- Including fastening material (without ground anchors)
- With assembly instructions and load plates C4 in accordance with DIN standard
- Expert advice by telephone
- Made in Germany
- Short delivery time
- Collection on site possible
Our cantilever racks are produced exclusively in Germany.
We offer reliable freight with registration before delivery.
The material is packed sensibly to enable easy unloading.
When installed outdoors, the load-bearing capacity is reduced by the wind and snow load.
The subsurface must be made of concrete, level and dowel-capable and be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer.
The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended.
According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.
Listing

1,355 km
Cantilever rack
Kragarmregal einseitig Höhe: 4.200 mmNutztiefe: 1.200 mm / Länge: 4.000 mm
Call
Condition: like new (used), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite):
Scope of delivery:
4 rack uprights, height 4,200 mm with foot section, 1,200 mm usable depth
12 cantilevers with 1,200 mm usable depth
Longitudinal and diagonal struts for 1,300 mm rack axis spacing (4,000 mm rack length)
Fastening material (screws, nuts and washers)
- (*No paint damage!)
Gusdpfsmidyfjx Ag Nsh
- (*No damaged components!)
- (*Reorder spare parts and extension possible at any time)
- (*Offer available in larger quantities: approx. 50 racks in stock)
Net price: €1,990.00 plus VAT
Detailed description:
- Stable steel construction made of IPE profiles (screw system)
- Surface painted in RAL 5010 (gentian blue)
- Rack height 4,200 mm
- Load capacity per stand 2,200 kg
- Base and cantilever arms with 1,200 mm usable depth
- Cantilever arms height adjustable in 100 mm increments
- 3 screwable cantilever arms per stand, standard (= 4 storage levels)
- Load capacity per cantilever arm 730 kg
- Including longitudinal and diagonal braces for 1,300 mm spacing
- Shelf length = 4,000 mm
- Including fastening material (without floor anchors)
- With assembly instructions and load plates C4 in accordance with DIN standard
- Expert advice by telephone
- Made in Germany
- Short delivery time
- On-site collection possible
Our cantilever racks are manufactured exclusively in Germany.
We offer reliable freight with registration before delivery.
The material is sensibly packed to enable easy unloading.
Delivery can take place in approx. 1 - 2 weeks after receipt of the order.
When installed outdoors, the load-bearing capacity is reduced by the wind and snow load.
The subsurface must be made of concrete, level and dowel-compatible and must be able to bear the loads. The customer must check and ensure that the soil condition and load-bearing capacity as well as any official permits that may be required are obtained.
The shelf supports must be anchored to the ground on site; anchoring to the wall is not necessary and is not recommended.
According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm from the top edge of the stand.
Listing

1,355 km
Cantilever rack
3 St. Ständer für Spanplatten / 5 EbenenHöhe 3,2m / Nutztiefe 1,8m / Länge 2,1m
Call
Condition: new, Year of construction: 2024, carrying capacity per cantilever arm: 500 kg, shelf height: 3,200 mm, total length: 2,100 mm, total height: 3,200 mm, axle spacing: 1,000 mm, load capacity per stand: 2,500 kg, Cantilever rack in hot-dip galvanized design:
Scope of delivery:
3 rack stands, height 3.2 m with base section, 1.8 m usable depth (2 m total depth)
12 cantilevers with 1.8 m usable depth (for chipboard with approx. 2.1 m depth)
Longitudinal and diagonal struts for 4 m rack length (distance 1.3 m)
Fastening material (screws, nuts and washers)
Net price: €2,490.00 plus VAT
Detailed description:
- Stable steel construction made of IPE profiles (screw system)
- Rack height 3,200 mm
- Load capacity per stand 2,500 kg
- Base section and cantilevers with 1,800 mm usable depth
- (for 2,100 mm chipboard depth)
- Cantilevers height adjustable in 100 mm increments
- 4 screwable screws per stand Cantilever arms, standard (= 5 storage levels)
- Load capacity per cantilever arm 500 kg
- Including longitudinal and diagonal braces for 1,000 mm spacing
- Shelf length = 2,100 mm
- Including fastening material (without ground anchors)
- With assembly instructions and load plates C4 in accordance with DIN standard
- Made in Germany
- Short delivery time
Our cantilever racks are produced exclusively in Germany.
Gsdpfoqt Dmyex Ag Nsuh
We offer reliable freight with registration before delivery.
The material is sensibly packed to enable easy unloading.
Delivery for stock items can take place in approx. 1 week after receipt of the order.
When installed outdoors, the load-bearing capacity is reduced by the wind and snow load.
The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer.
The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended.
According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.
Listing

1,355 km
Cantilever rack
Kragarmregal einseitig Höhe: 3.500 mmNutztiefe: 1.200 mm / Länge: 4.600 mm
Call
Condition: like new (used), Year of construction: 2024, Screw system in hot-dip galvanized design:
Pick-up price:
Sturdy steel construction made of IPE profiles
Shelf height 3500 mm
Load capacity per upright 2100 kg
Foot section 1200 mm usable depth
Guodpfemhhl Hsx Ag Noh
Cantilever arms height-adjustable in 100 mm increments
3 screw-on cantilever arms per upright Usable depth 1200 mm, standard (= 4 levels)
Load capacity per cantilever arm 700 kg
Including longitudinal and diagonal bracing
Including fastening material (without ground anchors)
With assembly instructions and load plates C4 according to DIN standard
Listing

1,355 km
Cantilever rack
Kragarmregal doppelseitig Höhe 3.500 mmTiefe je Seite 1.200 mm / Länge 4.000 mm
Call
Condition: like new (used), Year of construction: 2024, Cantilever rack double-sided used: Hot-dip galvanized screw system
Scope of delivery:
4 double-sided shelf uprights, height 3,500 mm with foot parts each 1,200 mm
24 cantilevers with 1,200 mm depth, standard
Including longitudinal and diagonal braces for 1,300 mm axle spacing
Incl. fastening material (without ground anchors)
- (*Delivery time approx. 1 week)
Godpfxomkixws Ag Nouh
- (*No damaged parts!)
- (*Reorder spare parts and extension possible at any time)
- (*Also available in larger quantities: 20 uprights in stock)
Detailed description:
- Stable steel construction made of IPE profiles
- Surface of all components hot-dip galvanized
- Load capacity per upright side 2,250 kg
- Load capacity per cantilever arm 750 kg
- Cantilever arms height adjustable in 100 mm increments
- 6 screwable cantilevers per upright and 2 foot parts with a depth of 1,200 mm, standard
= 4 storage levels one above the other per stand side
- Including longitudinal and diagonal braces for 1,300 mm spacing
- Shelf length 4,000 mm
- Including fastening material (without ground anchors)
- With assembly instructions and load plates C4 in accordance with DIN standard
- Expert advice by telephone
- Made in Germany
- Short delivery time
- Collection on site possible
Our cantilever racks are produced exclusively in Germany.
We offer reliable freight with registration before delivery.
The material is sensibly packed to enable easy unloading.
When installed outdoors, the load-bearing capacity is reduced by the wind and snow load.
The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer.
The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended.
According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.
Listing

1,355 km
Cantilever rack
Kragarmregal doppelseitig Höhe 4.160 mmTiefe je Seite 1.200 mm / Länge 4.000 mm
Call
Condition: like new (used), Year of construction: 2024, Cantilever rack double-sided used: Hot-dip galvanized screw system
Scope of delivery:
4 double-sided shelf stands, height 4,160 mm with foot section 1,200 mm
24 cantilevers with 1,200 mm depth, standard
Including longitudinal and diagonal braces for 1,300 mm axle spacing
Incl. fastening material (without ground anchors)
- (*Delivery time approx. 1 week)
- (*No damaged parts!)
- (*Reorder spare parts and extension possible at any time)
- (*Also available in larger quantities: 20 stands in stock)
Detailed description:
- Stable steel construction made of IPE profiles
Gujdoh Ek Dajpfx Ag Neh
- Surface of all components hot-dip galvanized
- Load capacity per stand side 2,250 kg
- Load capacity per cantilever arm 750 kg
- Cantilever arms height adjustable in 100 mm increments
- 6 screwable cantilever arms per stand and 2 base sections with a depth of 1,200 mm, standard
= 4 storage levels one above the other per side of the stand
- Including longitudinal and diagonal braces for 1,300 mm spacing
- Shelf length 4,000 mm
- Including fastening material (without ground anchors)
- With assembly instructions and load plates C4 in accordance with DIN standard
- Expert advice by telephone
- Made in Germany
- Short delivery time
- Collection on site possible
Our cantilever racks are produced exclusively in Germany.
We offer reliable freight with registration before delivery.
The material is sensibly packed to enable easy unloading.
When installed outdoors, the load-bearing capacity is reduced by the wind and snow load.
The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer.
The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended.
According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.
We make the search easier for you
You will receive new offers immediately and free of charge via e-mail
You can easily terminate the search request at any time
Used Cantilever racks (94)
Search Machineseeker now with more than 200,000 used machines:Browse through the most popular machine descriptions:
- 3 Cantilever Arm Racks An And Double Sided
- Cantilever Arm
- Cantilever Arm Shelf
- Cantilever Rack Shelf
- Cantilever Racking
- Double Sided Cantilever Rack
- Equipment Rack
- Galvanized Pallet Racking
- Heavy Duty Pallet Racks
This may be of interest to you

Get information now
+44 20 806 810 84
+44 20 806 810 84
List now
*per listing / month