Year of construction: 1997, Condition: used, Used Comi Condor type HX/GMP 316L stainless steel Atex rated horizontal peeler centrifuge. Unit has 1150mm diameter perforated basket. Maximum load 280kgs, maximum cake capacity 222 litre. Internal rated +0.5/-0.5 bar design pressure at 50 deg.c. Unit has main drive, hydraulic powerpack, mounting springs and (2) control cabinets. Dkjb Hoiwyr Asn Tnvel Process Equipment Ltd buys and sells high quality used and refurbished process equipment worldwide. We have equipment in stock, immediately available, and can save you considerable time and money on your process equipment. Global Support is available; Perry has warehouses in the UK, USA, Poland, Czech Republic and France to support our customers worldwide. View our entire inventory of process equipment on our website and request a no-obligation quotation on any of our items.

Condition: good (used), 12,500 liters per minute at 8 bar per pump with a power of 237 kW. Engine brand FIAT, model 9L15 Dkeb Hsv Rwydjn Tnvsl

Condition: excellent (used), Tatham Twin shaft paddle mixer Serial: CO1040 Dkeb Hn Tnewfh Imevjl Stainless, 1200Kg twin shaft paddle mixer, New motors, new gearbox, new chains, with stainless holding hopper at base

Condition: used, Manufacturer: Olsa Model: – Year: – Quality: stainless steel Dkeb Hn Tovlynmenvsl Capacity: 1000 litres Stirring: 4,5 KW Motor speed : 710 – 1440 rpm Internal pressure (bar): unknown, pressure possible. Air input Pressure gauge and inside pressure holding valve Double jacket: yes Heat insulation: yes T°C control hot / cold: solenoid valves Note: cleaning of interior marks possible in case of sale

Year of construction: 1998, Condition: like new (used), Used Kleiser GmbH approximately 16sqmt horizontal shell and tube heat exchanger. Unit has (68) 316L stainless steel tubes approximately 3,000mm long x 25mm outside diameter, rated 6 bar design pressure at 100 deg.c. 316Ti stainless steel shell approximately 3,000mm long x 324mm diameter, rated 6 bar design pressure at 100 deg.c. (2) 316Ti stainless headers. Unit has 2 support mounts. This heat exchanger is located at Perry Process Equipment Ltd UK site. It has recently been pressure tested on both sides. Please contact us for further details or to arrange a site inspection of the unit. Process Equipment Ltd buys and sells high quality used and refurbished process equipment worldwide. We have equipment in stock, immediately available, and can save you considerable time and money on your process equipment. Global Support is available; Perry has warehouses in the UK, USA, Poland, Czech Republic, Russia and Ukraine to support our customers worldwide. View our entire inventory of process equipment on our website and request a no-obligation quotation on any of our items. Deb Hoh Agxhon Tnvokl

Condition: good (used), Year of construction: 2000, Volume in l: 50; Design pressure in bar: 6.6/FV; Design temperature in °C: -30/200 °C; Alloy: Hastelloy lined; Weight in kg: 325 Dsb Hn Tnjv Rv Tcsvekl

Year of construction: 2008, Condition: refurbished (used), Used Winkworth model RT400 stainless steel high speed ploughshare (T-Arm) mixer. Approximate capacity 400 litre (product dependent). Mixing chamber measures approximately 1,300mm long x 800mm diameter. T-Arm ploughshare blades driven by approximately 22kw motor and gearbox. Unit includes (1) stainless steel side entry chopper driven by approximately 7.5kw motor. Has provision for a second chopper. Unit has centre bottom pneumatically operated flap discharge valve. Process Equipment Ltd buys and sells high quality used and refurbished process equipment worldwide. We have equipment in stock, immediately available, and can save you considerable time and money on your process equipment. Global Support is available; Perry has warehouses in the UK, USA, Poland, Czech Republic and France to support our customers worldwide. View our entire inventory of process equipment on our website and request a no-obligation quotation on any of our items. Djb Hnekx E Txs Tnvokl

Condition: refurbished (used), Perry is offering a high quality, refurbished used Morton model FKM800 304 stainless steel ploughshare mixer. Manufacturer: Morton Material: Stainless steel (304) Serial Number: M23274 Capacity: 240-560 litre working capacity. 800 litre total capacity (product dependent) Mixing Chamber: 1,800mm straight side x 760mm diameter Discharge Type: Pneumatically Operated Bomb Door Style Discharge Valve Type Of Blades: Stainless Steel Shaft with Ploughshare Blades Motor: 15kW Motor with Gearbox Also Includes: 2 Stainless Steel Side Entry Choppers Direct Driven by 4kW Motors. Refurbishment Dkeb Hn Totz Tdpjnvel · All parts shot blasted and painted. · Gearbox overhauled including new bearings, seals and oil. · Main drive motor overhauled with new bearings and seals. · New drive belts fitted. · Chopper assemblies overhauled with new bearings and PTFE packing. · Packing glands serviced with new PTFE packing. · Fitted new bearings and seals to shaft end bearing housings and packed with grease. · Re-gasketed access hatch and outlet valve with silicone sponge. · Test run on completion. Perry has been supplying this type of equipment for decades. You can rely on getting a first class service from the Perry Equipment Group.

Condition: used, Used GFT Trenntechnik model V30 Hastelloy C22 contact parts vertical basket centrifuge. Basket measure approximately 300mm diameter x 150mm straight side. Approximate capacity 5 litre and 8kg useful load. Unit is top load and unload with filter bag discharge. Has quick release cover / lid. Unit is bottom driven with electric motor. Unit is mounted on mobile trolley. Dob Hnjun S Iys Tnvskl

Condition: like new (used), Year of construction: 2000, Used Kemutec Kek model 200 EC Stainless Steel Jacketed Ribbon/T-Arm Mixer. Has approximately 200 litre working capacity and 215 litre total capacity. Mixing trough approximately 565mm diameter X 860mm long. Has hinged lid and end cover. Internal rated atmospheric pressure at 50 degC. Cantilever design with bolted double ribbon mixing blade belt driven by 7.5 kw 400 volt 3/50 & 480 volt 3/60 11460 rpm motor via David Brown Radicon gearbox rated 15.5/1 reduction ratio at approximately 53 rpm. Includes spare double ribbon and t-arm mixing blades. Has provision for chopper but none fitted. Includes centre bottom discharge with valve. Has stainless steel jacket rated 4.4 bar design pressure at 154.83 degc. Mounted on mobile base. Process Equipment Ltd buys and sells high quality used and refurbished process equipment worldwide. We have equipment in stock, immediately available, and can save you considerable time and money on your process equipment. Global Support is available; Perry has warehouses in the UK, USA, Poland, Czech Republic and France to support our customers worldwide. View our entire inventory of process equipment on our website and request a no-obligation quotation on any of our items. Dob Hn Tjiwytcenvekl

Condition: refurbished (used), Perry is offering a high quality, used Morton model FKM600 stainless steel jacketed ploughshare type mixer. Morton is recognised as a leading manufacturer of mixing equipment. Manufacturer: Morton Material: Stainless steel External Jacket: Stainless steel rated 5.5 Bar design pressure at 162 deg.c. Capacity: Approximately 150-450 litre working capacity, 600 litre total capacity (product dependent) Discharge Type: Bottom bomb door style with pneumatically operated door. Type Of Blades: Stainless steel shaft with Becker-shovel type blades Motor: 22kW motor with gearbox Also includes: Provision for (2) side entry choppers. (Not fitted). Dsb Hnjtz Tcrj Tnvokl Perry has been supplying this type of equipment for decades. You can rely on getting a first class service from the Perry Equipment Group.

Condition: refurbished (used), Used Tatham approximately 750 litre 304 stainless steel twin shaft paddle mixer. Mixing trough approximately 1000mm wide x 1500mm long. Twin shaft paddles chain driven by 15 kw 415 volt 3/50 motor. Has pneumatically operated twin bomb door discharge. Unit mounted in mild steel frame. Dsb Hohqxtfsn Tnvjkl Process Equipment Ltd buys and sells high quality used and refurbished process equipment worldwide. We have equipment in stock, immediately available, and can save you considerable time and money on your process equipment. Global Support is available; Perry has warehouses in the UK, USA, Poland, Czech Republic and France to support our customers worldwide. View our entire inventory of process equipment on our website and request a no-obligation quotation on any of our items.

Condition: used, Used Stainless Process Systems approximately 50 litre (13 US Gallon) stainless steel vertical reactor. Unit measures approximately 500mm diameter x 300mm straight side. Unit has welded dished bottom and clamped dished top head. Internal originally rated 75psi (5.17bar) maximum allowable working pressure at -20 to 350 deg.f. (-28 to 176 deg.c.) Unit re-rated in 2015 to 100psi (6.89bar) maximum allowable working pressure at 350 deg.f. (176 deg.c.). External stainless steel jacket rated 90psi (6.20 bar) / full vacuum maximum allowable working pressure at 350 deg.f. (176 deg.c.). Unit has bottom entry Steridose magnetic coupled agitator driven by Baldor 0.37hp, 1730rpm electric motor. Unit includes local control panel. Mounted on mobile stainless steel trolley. Dkjb Hn Toun S Hpenvsl

Condition: used, Used Niro Mobile Minor stainless steel laboratory spray dryer. This unit has an approximate evaporation rate of 1 to 7 kg/hr depending on product. Has stainless steel chamber approximately 800mm diameter x 915mm straight side. Chamber is lagged and clad. Has electric heater, cyclone and pipework. Unit is mounted on mobile frame. Includes stainless steel Niro centrifugal air operated atomiser. Dkeb Hn Tjun S I Tonvol

Condition: refurbished (used), Used Oliver & Batlle model HM-15 stainless steel bead mill. Has stainless steel jacketed chamber which measures approximately 450mm long x 250mm diameter. Approximate total capacity 15 litre (product dependent). Unit has stainless steel rotor belt driven by 18.5kw, 415volt, 3/50, 1460rpm motor. Dkeb Hn Tnokx E S Njvol Process Equipment Ltd buys and sells high quality used and refurbished process equipment worldwide. We have equipment in stock, immediately available, and can save you considerable time and money on your process equipment. Global Support is available; Perry has warehouses in the UK, USA, Poland, Czech Republic and France to support our customers worldwide. View our entire inventory of process equipment on our website and request a no-obligation quotation on any of our items.

Condition: refurbished (used), Comprehensively tested, used Kemutec approximately 400 litre working capacity (product dependent) 316 stainless steel ribbon blender. Trough measures approximately 1680mm Long x 580mm wide x 700mm deep. Has stainless steel single interrupted ribbon driven by 5.5kw motor & gearbox. Unit includes stainless steel hinged lid with clamps. Includes bottom discharge valve. Dkjb Hnjun Sr Eo Tnvjl

Condition: like new (used), Used Kemutec Kek model 400 PE stainless steel Ribbon/ploughshare mixer. Has approximately 400 litre working capacity. Currently fitted with T-arm mixing blades driven by electirc motor/gearbox. Includes spare stainless steel plough blade mixing shaft. Has (1) side chopper with electric motor. Includes centre bottom discharge with valve. Mounted on mobile base. Dobeiwytge Hn Tnvjkl Process Equipment Ltd buys and sells high quality used and refurbished process equipment worldwide. We have equipment in stock, immediately available, and can save you considerable time and money on your process equipment. Global Support is available; Perry has warehouses in the UK, USA, Poland, Czech Republic and France to support our customers worldwide. View our entire inventory of process equipment on our website and request a no-obligation quotation on any of our items.

Condition: used, Used Pfaudler BE5000 vertical glass lined reactor. Approximately 5,000 litre capacity. Internal rated 6.6 bar/full vacuum design pressure at -29 to 200 deg.c. External mild steel jacket rated 6.6 bar/full vacuum design pressure at -29 to 200 deg. Unit has welded dished top and bottom heads. Includes top entry 4-blade CBR Turbine type agitator driven by a 10.5 kw 415 volt 292-1460 rpm 3/50 motor. Unit is mounted on lugs. Dkob Hn Tnstz Tgqevol

Condition: used, Used BCD approximately 1,000 litre capacity super duplex 2507 stainless steel vertical reactor. Unit measures approximately 1,450mm tan to tan x 920mm diameter. Unit has welded dished top and bottom heads. Internal rated 3 bar/full vacuum design pressure at -10 to 180 deg.c. External 316L stainless steel jacket rated 10 bar / full vacuum design pressure at -10 to 180 deg.c. Unit has bottom entry stirrer with mag drive. Unit mounted on (3) stainless steel legs. Dsbeun Sycj Hn Tnvekl

Condition: like new (used), Used Netzsch model LMZ2 stainless steel bead mill with associated parts. Unit has stainless steel peg style rotor and stainless steel jacketed chamber. Approximately 2 litre capacity. Deb Hn Tnohpciajvekl Unit includes feed pump and control panel. All mounted on stainless steel base. Process Equipment Ltd buys and sells high quality used and refurbished process equipment worldwide. We have equipment in stock, immediately available, and can save you considerable time and money on your process equipment. Global Support is available; Perry has warehouses in the UK, USA, Poland, Czech Republic, Russia and Ukraine to support our customers worldwide. View our entire inventory of process equipment on our website and request a no-obligation quotation on any of our items.

Condition: like new (used), Used Zetterstrom 912 litre capacity 316L stainless steel vertical reactor. Unit has welded dished top and bottom heads. Internal rated 6 bar design pressure at -35 to 180 deg.c. External stainless steel jacket rated 6 bar/full vacuum design pressure at 180 deg.c. Unit has top entry 3-tier stainless steel agitator direct diven by 4 kw 220/380 volt 3/50 1440 rpm motor via Lightnin model LS400 gearbox. Also includes (3) baffles. Unit is mounted on side supports. Unit requires a mechanical seal and backing plate. Djb Hn Tjgfb Rgsnvokl Process Equipment Ltd buys and sells high quality used and refurbished process equipment worldwide. We have equipment in stock, immediately available, and can save you considerable time and money on your process equipment. Global Support is available; Perry has warehouses in the UK, USA, Poland, Czech Republic, Russia and Ukraine to support our customers worldwide. View our entire inventory of process equipment on our website and request a no-obligation quotation on any of our items.

Condition: like new (used), Used APV approximately 50.4 square meter stainless steel shell and tube bundle heat exchanger. Has (328) 16mm diameter X 3060mm long stainless steel tubes rated 3 bar pressure. Stainless steel shell measures approximately 700mm diameter X 3060mm long rated 1.5 bar pressure. Bolted stainless steel heads. Dkob Hneg Sr S Re Tnvsl Process Equipment Ltd buys and sells high quality used and refurbished process equipment worldwide. We have equipment in stock, immediately available, and can save you considerable time and money on your process equipment. Global Support is available; Perry has warehouses in the UK, USA, Poland, Czech Republic, Russia and Ukraine to support our customers worldwide. View our entire inventory of process equipment on our website and request a no-obligation quotation on any of our items.

Condition: refurbished (used), Used Refurbished Giusti model Pharmix 120 litre capacity 316 stainless steel jacketed process vessel. Internal approximately 510mm diameter X 585mm straight side. Has clamped dished top and welded dished bottom heads. Internal rated full vacuum/1.38 bar working pressure. Has 321 stainless steel external jacket rated 3.45 bar working pressure. Vertical agitator with PTFE wall scraper blades direct driven by 1.1 kW, 415 volt, 3/50, 1420 rpm motor via Supaflex enclosed VS drive rated 600-3000 rpm motor and Electro power gears type ESRV2 gearbox rated 34.1 reduction ratio. Bottom entry homogeniser direct driven by a pole changing 2 speed 3.7/4.4 kW, 400 volt, 3/50, 1425/2890 rpm motor. Dkeb Hn Tnegcb A Eevsl Mounted in stand with hand hydraulic lift for raise and lower of top dished head. Has approximately 38mm (1.5") centre bottom discharge with valve. Designed for producing liquids, creams and semi solids under sterile conditions. This unit has recently been refurbished and is immediately available for sale. Here at Perry Process Equipment Ltd our engineering workshop aids us in being a premium supplier of high quality used process equipment. We can carry out a range of services from basic equipment testing right up to mechanical refurbishment, for a broad range of industries. Contact us for further details about the refurbishment work carried out on this unit and to request a free no-obligation quotation. Process Equipment Ltd buys and sells high quality used and refurbished process equipment worldwide. We have equipment in stock, immediately available, and can save you considerable time and money on your process equipment. Global Support is available; Perry has warehouses in the UK, USA, Poland, Czech Republic, Russia and Ukraine to support our customers worldwide. View our entire inventory of process equipment on our website and request a no-obligation quotation on any of our items.

Condition: like new (used), Used Sinclair Stainless Fabrications approximately 15,000 litre 316 stainless steel vertical reactor. Unit measures approximately 2,300mm diameter x 3,540mm straight side. Has welded dished top and bottom heads. Internal rated 3.6 bar/full vacuum design pressure at 165 deg.c. Has external stainless steel limpet coil jacket rated 5.5 bar design pressure at 165 deg.c. Unit has top mounted stainless steel agitator with 2-tier 4-blade turbine blades. Driven by 45kw motor/gearbox with new double mechanical seal. Process Equipment Ltd buys and sells high quality used and refurbished process equipment worldwide. We have equipment in stock, immediately available, and can save you considerable time and money on your process equipment. Global Support is available; Perry has warehouses in the UK, USA, Poland, Czech Republic, Russia and Ukraine to support our customers worldwide. View our entire inventory of process equipment on our website and request a no-obligation quotation on any of our items. Dob Hnogwbbfs Tnvskl

Condition: like new (used), Used Wefco approximately 55,000 litre 304 stainless steel vertical mixing tank. Unit measures approximately 3400mm diameter x 6100mm straight side. Dkjb Hn Tjgf A Txjnvjl Top entry agitator driven by a 5.5kw 1455rpm 3/50 motor via a gearbox. Has welded flat top and dished bottom heads. Process Equipment Ltd buys and sells high quality used and refurbished process equipment worldwide. We have equipment in stock, immediately available, and can save you considerable time and money on your process equipment. Global Support is available; Perry has warehouses in the UK, USA, Poland, Czech Republic, Russia and Ukraine to support our customers worldwide. View our entire inventory of process equipment on our website and request a no-obligation quotation on any of our items.