Used chillers for sale (359)

Condition: used, Year of construction: 2016, functionality: fully functional, Equipment: cooling unit, fridge, 5 units Star Refrigeration water-cooled chillers. Industrial chilled-water packages by Star Refrigeration Ltd, Glasgow. Contract 100663, installed 2016. Five chillers in stock. Six cooling towers available with the set or separately. Price on request. Fgsdpfxjzz Rfqe Aanoi Each chiller is a packaged R134a plant on a steel skid: three semi-hermetic compressors, shell-and-tube chilled-water evaporator, oil separator, SMES control panel and gas detection. Specification per chiller. Manufacturer: Star Refrigeration, Thornliebank Industrial Estate, Glasgow G46 8JW Refrigerant: R134 a Charge: 840 kg Maximum allowable pressure: 18.0 barg high side / 17.2 barg low side Year of installation: 2016 Supply: 400 V, 3 phase, 50 Hz Control voltage: 110 V Control panel: SMES CE marked Compressors Three semi-hermetic compressors per machine, numbered 1–3, each with oil separator and terminal box. Refrigerant lines tagged R134a.

Condition: new, Year of construction: 2025, functionality: fully functional, cooling capacity: 17.37 kW (23.62 HP), type of input current: three-phase, type of cooling: water, overall weight: 228 kg, ambient temperature (max.): 35 °C, ambient temperature (min.): -20 °C, input voltage: 380 V, pressure: 2.5 bar, volume flow: 2.48 m³/h, pump pressure: 3.1 bar, total width: 991 mm, total length: 722 mm, total height: 1,214 mm, input current: 17 A, operating pressure: 3 bar, empty load weight: 228 kg, input frequency: 50 Hz, energy consumption: 17 kWh, Equipment: cooling unit, type plate available, Unused DTE CoolMaster K-017.4 water chiller, manufactured in October 2025. Never operated, for sale due to changed plans. Performance Cooling capacity: 17.37 kW at 15 °C water and 27 °C ambient (control range 12.4 to 17.4 kW) Adjustable water temperature: 5 to 40 °C Flow rate: 2,480 l/h at 2.5 bar, with built-in 1.1 kW centrifugal pump Tank: 84 litres, with automatic refill valve Ambient temperature: 0 to 35 °C Suitable for drinking-quality water Technical specifications Scroll compressor, plate heat exchanger, axial condenser fan Refrigerant R134a, 2.8 kg (4.0 tonnes CO₂ equivalent, GWP 1,430) PED art. 4.3, PS HP/LP 31.0 / 18.8 bar Stainless steel casing and tank Electrical: 3x 380 to 415 V, 50 Hz, max. 17.2 A, 25 A main switch Temperature controller, alarm lamps (high pressure, low pressure, compressor, fan, pump, water level), and a volt-free common alarm contact Input for external start/stop Water connections: inlet and outlet 1" BSP Dimensions and weight Fgodpfx Ao Airigsanei 991 x 722 x 1192 mm (L x W x H), 228 kg (unloaded) Documentation CE marking, IIA declaration, manual in NL/EN, electrical diagram available on request. Additional information Pickup ex works Schiedam, the Netherlands, viewing by appointment. Shipping can be arranged. Price excluding VAT. Questions or additional photos? Send a message or call.

Condition: used, Year of construction: 2019, Complete system for sale: 1 York chiller and one Jäggi cooling unit. Fodpfjv Npgmjx Aansgi

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, cooling capacity: 65 kW (88.38 HP), type of input current: three-phase, type of cooling: water, overall weight: 750 kg, ambient temperature (max.): -5 °C, ambient temperature (min.): 43 °C, input voltage: 400 V, pressure: 10 bar, temperature: -8 °C, volume flow: 17.17 m³/h, pump pressure: 10 bar, total width: 1,110 mm, total length: 2,110 mm, total height: 1,750 mm, power: 6 kW (8.16 HP), York International 65kW Chiller. Purchased in 2023 - unused since date but in good physical and mechanical condition. Fjdpfx Aozi S Dksanogi Requires Glycol / Brine / Water reservoir.

Condition: like new (used), Year of construction: 2021, Power: 1.1 kW, 220 V, 50/60 Hz, Weight: 48 kg Refrigerant: R410A, 980 g. Fgedpe Aifrujfx Aanei The air coolers were installed on newly acquired erosion machines. Due to the existing central water cooling system, the air coolers were removed before commissioning.

Condition: used, Year of construction: 2023, operating hours: 50 h, functionality: fully functional, machine/vehicle number: S527601, cooling capacity: 7 kW (9.52 HP), type of input current: three-phase, overall weight: 300 kg, ambient temperature (max.): 100 °C, ambient temperature (min.): -10 °C, input voltage: 400 V, pressure: 19 bar, volume flow: 4.8 m³/h, total width: 600 mm, total length: 600 mm, total height: 1,450 mm, input current: 16 A, operating pressure: 19 bar, empty load weight: 280 kg, input frequency: 50 Hz, Equipment: cooling unit, We are offering a used HUBER Unichiller 070Tw-H6 + Flow Control Cube MID chiller, manufactured in 2023. Manufacturer: HUBER Model: Unichiller 070Tw-H6 + Flow Control Cube Year of Manufacture: 2023 Machine Type: Chiller If you have any questions or require further information, please feel free to send us a message or call us. Product Description This offer includes two perfectly matched devices for industrial process cooling and precise flow control: Huber Unichiller 070Tw-H6 – a powerful recirculating chiller for temperature ranges from -10 °C to +40 °C Flow Control Cube MID – magnetically inductive flow control for electrically conductive thermal fluids Technical Data Huber Unichiller 070Tw-H6 Temperature Range: -10 … +40 °C Cooling Capacity: 7 kW (15 °C), 4.2 kW (0 °C), 2.5 kW (-10 °C) Refrigerant: R-449A (A1, H280) Fodj Agu E Repfx Aanegi Controller: Pilot ONE Dimensions: 600 × 600 × 1450 mm Flow Control Cube MID Temperature Range: -40 … +130 °C Max. Flow Rate: 80 l/min Accuracy: ±0.1 l/min Dimensions: 420 × 593 × 591 mm

Condition: like new (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 2200427994, cooling capacity: 390 kW (530.25 HP), type of cooling: air, ambient temperature (max.): 47 °C, ambient temperature (min.): -20 °C, 275 kW, MTA air-cooled chilled water unit, type: Aries G ASG 115 SHE M.T.A. S.p.A. The ARIES G ASG 115 SHE are compact chilled water units suitable for outdoor installation (from -20°C to +47°C); featuring a shell-and-tube evaporator, scroll compressors, control and switchgear cabinet, shut-off valves for compressors, equipment for low ambient temperatures down to -20°C, P3 double pump, 500-liter buffer tank, electric anti-freeze heater, condenser filter mats including Victaulic couplings. Cooling capacity (kW): 275 Fgode Agwcqspfx Aanji Chilled water temperature outlet/inlet (°C): 7 / 12 Ambient temperature (°C): 35 Refrigerant circuit: Refrigerant R454B Refrigerant circuits (number): 2 Compressors (number): 4 Capacity stages (%): 0-17-33-50-67-83-100 Electrical data: Voltage V 400, Frequency Hz 50, Phases Ph 3 Protection class IP54

Condition: good (used), Year of construction: 2016, Galletti LCX082CSG Water chiller Serial: 16701165 Fodpowxll Nofx Aanogi 2016, four fan system, adjustable temperature controls, see plate for all spec, 3Ph

Condition: used, Year of construction: 2020, functionality: fully functional, Equipment: documentation/manual, For sale is a complete industrial RITTAL TopTherm switchgear cooling system, consisting of a central RITTAL chiller/cooling unit and a total of 16 RITTAL air/water heat exchangers. The system comes from an industrial production facility and was used for the central cooling of several switchgear cabinets. The entire system was in trouble-free operation until it was professionally dismantled. RITTAL Chiller / Cooling Unit Manufacturer: RITTAL GmbH & Co. KG Type: SK 3336.459 Design: KRAE0200TT00V480EF Year of manufacture: 2020 Date of manufacture: 07/15/2020 Serial number: 2020K000069533 Technical data: Nominal cooling capacity: 24,400 W / 24.4 kW Operating voltage: 3 × 400 V / 50 Hz Max. current: 22.3 A Starting current: 111.7 A Max. power consumption: 11,330 W Refrigerant: R410A Tank volume: 78 liters Temperature range: -20 to +43 °C Noise level: 76 dB(A) Protection class: IP44 Weight: 326 kg 16 RITTAL Air/Water Heat Exchangers The scope of delivery includes a total of: 10 × RITTAL TopTherm SK 3210.500 Air/Water Heat Exchanger Useful cooling capacity: 4.0 kW Operating voltage: 230 V Cooling medium: Water Protection class: IP55 6 × RITTAL TopTherm SK 3209.500 Air/Water Heat Exchanger Useful cooling capacity: 2.5 kW Operating voltage: 230 V Water flow rate: 400 l/h Cooling medium: Water Protection class: IP55 Weight: approx. 23.5 kg Fgodpszwaa Aefx Aanoi The heat exchangers were mounted on the respective switchgear cabinets and supplied with cooling water via the central RITTAL cooling unit. Scope of delivery: 1 × RITTAL TopTherm Chiller SK 3336.459, 24.4 kW 10 × RITTAL Air/Water Heat Exchanger SK 3210.500 6 × RITTAL Air/Water Heat Exchanger SK 3209.500 Existing cooling water pipes and hoses Existing connection fittings and connecting parts Other existing installation and connection accessories as shown in the pictures This offers a largely complete central switchgear cooling system with a total of 16 cooling points. The components come from a professionally installed industrial system, manufactured in 2020. The condition is used; minor optical signs of wear or damage to individual plastic covers can be seen in the pictures. Inspection is possible by appointment. The complete system is preferred for sale. Price: €14,900 net, negotiable Subject to prior sale and errors in the technical data. Technical data according to nameplates and available manufacturer documents.

Condition: used, Year of construction: 2010, functionality: unexamined, machine/vehicle number: 32003375, type of input current: three-phase, type of cooling: air, overall weight: 2,320 kg, input voltage: 400 V, total width: 2,220 mm, total length: 4,110 mm, total height: 2,150 mm, input frequency: 50 Hz, Climaveneta NECS/Q/B 0904 multi-purpose unit, air-to-water, air-cooled condenser, for simultaneous chilled and hot water production in a 4-pipe system. Year of manufacture: 2010. Serial number: 32003375. Cooling capacity: approximately 211 kW. Heating capacity: 234.2 kW. Power consumption in cooling mode: 85.23 kW; maximum electrical power as indicated in the documentation: 107.8 kW. Four scroll compressors, two refrigeration circuits, R410A refrigerant (charge indicated on the nameplate: 2 × 35 kg). Power supply: 400 V, three-phase, 50 Hz. Approximate dimensions (L × W × H): 4,110 × 2,220 × 2,150 mm. Weight as indicated on the nameplate: 2,320 kg. Exact operating hours not recorded. Condition: used equipment, already disassembled and stored in Covelas, Trofa. It was operational before disassembly, but without reaching full capacity and requiring maintenance. In circuit 1, an internal leak was identified in the expansion valve and an abnormal noise in the four-way valve. In circuit 2, the suction transducer is defective. Under current conditions, it is not possible to perform a load test. Some photographs show the equipment before disassembly; others show its current state in the warehouse. Visits by appointment only. Collection, lifting equipment, loading, and transportation are the responsibility of the buyer. Fgedpfez Hqrlox Aanei

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, cooling capacity: 10 kW (13.60 HP), Negative-temperature refrigeration unit with evaporative cooling for negative-temperature chambers, -20°C. Power: 10 kW Operating conditions: -28/35°C In very good overall condition. Fgjdpfx Aozz N Ttsanji

Condition: used, Year of construction: 2007, functionality: fully functional, cooling capacity: 1,012 kW (1,375.94 HP), Carrier Absotption Chiller working with Lithium Bromide Cooling capacity at 12/8C° = 1000KW (300 refr.tons) In good working condition Fjdpfx Aas Afc Ngsnjgi

Condition: good (used), Year of construction: 2020, Daikin ERQ200A7W1B Condensing unit Serial: 8008515 2020, condensing unit, Gas R410A, 3Ph Fsdpfsu U Iyqox Aansgi

Condition: used, CTS – Clima Temperatur Systeme GmbH Temperature test chamber / Battery test chamber T-50/3800/I -50 to +100 °C | 3,750 liters | water-cooled Nitrogen inertization with O2/CO monitoring and safety door locking Used CTS T-50/3800/I for temperature and environmental simulation tests. According to the previous owner, it was used for testing HV battery systems. TECHNICAL DATA Temperature range: -50 to +100 °C Temporal/spatial temperature deviation: up to ±0.5 K each Heating rate: approx. 4 K/min (-40 to +80 °C) Cooling rate: approx. 3 K/min (+85 to -40 °C) Change rates according to manufacturer's documentation, average without test specimen in the inlet air. Test volume: 3,750 liters Internal dimensions (H × W × D): approx. 1,000 × 2,500 × 1,540 mm (according to the previous owner) Installation drawing: dimensions in top view 2,840 mm; overall height approx. 2,450 mm. Complete external dimensions to be confirmed. Fodpj Aidd Nofx Aansgi Weight: chamber approx. 2,700 kg; separate control cabinet approx. 200 kg; together approx. 2,900 kg without test specimen/additional fittings. REFRIGERATION SYSTEM AND ELECTRICALS Refrigerant pre-cooling: R507, 6.5 kg Refrigerant cooling: R23, nameplate 15 bar / 5 kg Max. permissible overpressure: 25 bar each; test pressure: 27.5 bar each Mains connection: 400 V / 3/N / 50 Hz Rated power according to nameplate: 20.4 kW; rated current: 36.3 A On-site protection: 50 A slow-blow; protection class: IP54 Max. heat input: 5,000 W at -40 °C Cooling water supply/return: R 1 inch; approx. 2.5 m³/h at ΔT = 10 K and full load Nitrogen: R 3/4 inch, operating pressure 3–6 bar Condensate drain: R 1 inch internal thread Sound pressure level: under 70 dB(A) according to manufacturer's documentation EQUIPMENT Digital temperature control with 32-bit controller, LCD setpoint/actual value display, numerical setpoint input, manual and program operation, water-cooled refrigeration unit, electronic monitoring/control system, stainless steel heating element with safety temperature limiter, stainless steel test chamber (1.4301), floor load 500 kg, radial fan, lockable double-wing door, separate control cabinet, RS232 and potential-free fault reporting contact. SAFETY / BATTERY TESTING Nitrogen inertization, O2 residual content monitoring, CO sensor, Dräger-Polytron sensors for O2/CO according to the previous owner, ATEX-tested flame arrestors according to manufacturer's documentation, electromagnetic door locking, mechanical emergency release, overpressure switch in the refrigeration circuit and current monitoring of the fan motors. HV connections and cooling water connections for test specimens are available according to the previous owner. The previous owner describes the safety equipment as "Hazard Level 6"; this classification has not been independently confirmed. AREAS OF APPLICATION HV battery and temperature tests, environmental simulation, electronics, component and material testing, development, quality assurance, as well as aging and stress tests. CONDITION / SCOPE OF SUPPLY Used; optical condition according to the pictures. 1 × CTS T-50/3800/I, separate control cabinet and accessories as shown in the pictures. Shipping or freight transport possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, cooling capacity: 450 kW (611.83 HP), total width: 1,000 mm, total length: 3,870 mm, total height: 2,070 mm, Equipment: type plate available, Trane chiller, Fgsdpfx Aajyzwprenji Suitable for refrigerant R404A. With sound-insulated enclosure. A total of 2 units available, price stated per machine. Enclosure dimensions: Length: 4330 mm Width: 1570 mm Height: 2570 mm Available by arrangement in September 2026.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, cooling capacity: 800 kW (1,087.70 HP), overall weight: 4,500 kg, Equipment: compressor, freezer, Refrigeration machine with 2x dry coolers Fsdpfxerzq Ars Aanegi Cooling capacity: max 800 kW Number of cooling circuits: 2 Refrigerant type: R134A Voltage: 400 V Absorbed power: 176 kW Year of manufacture: 2009 2 Trane CHHP0N2TKG0N134A semi-hermetic screw compressors, shell and tube as evaporator, 2x oil separators, Guentner GBV 200 Evaporator TRANE EG 340 evaporator water concentration 560 liters Control cabinet 1x air-cooled condenser machine weight: 4500kg With dry coolers 1x Güntner GWH 090.1D/5-M PT: 30.8 bar PS: 28 bar The specified cooling capacity is at a water outlet of +7°C at a condensing temperature of +40°C.

Condition: like new (used), Year of construction: 2024, operating hours: 60 h, functionality: fully functional, cooling capacity: 497 kW (675.73 HP), type of input current: three-phase, type of cooling: water, overall weight: 4,364 kg, ambient temperature (max.): 35 °C, ambient temperature (min.): -10 °C, input voltage: 400 V, total width: 2,200 mm, total length: 5,645 mm, total height: 2,530 mm, warranty duration: 6 months, power: 244 kW (331.75 HP), input current: 392 A, heating capacity: 492 kW (668.93 HP), input frequency: 50 Hz, Equipment: compressor, cooling unit, type plate available, Chiller / Heat Pump Trane Type: CXAF150 SE XLN Year of manufacture: 2024 Fodsw Idkujpfx Aanjgi Operating hours: approx. 60h R454B Cooling capacity: 497 kW - 7/12°C - 35°C Heating capacity: 492 kW - 50/55°C - 7°C COP cooling: 3.05 COP heating: 2.62 Scroll compressors 3/3 2 circuits EC fans – Extra low noise Available Trane warranty: until 22/05/2026

Condition: used, Year of construction: 2023, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, pump pressure: 5.9 bar, power: 21.1 kW (28.69 HP), input current: 63 A, input frequency: 50 Hz, Equipment: type plate available, We are offering this used LAUDA UC 65 chiller, manufactured in 2023. Type: UC 65 Order number: L002939 Serial number: 79807 Refrigerant: R-410A (GWP 2088) Filling quantity I: 6.0 kg CO₂ equivalent: 12.5 t Filling quantity II: kg Operating pressure, high-pressure side: 43 bar Operating pressure, low-pressure side: 32 bar Nominal pressure, pump I: 5.9 bar Operating pressure, process circuit I: 6.5 bar Nominal pressure, pump II: bar Operating pressure, process circuit II: bar Voltage: 400 V Mains connection: 3/PE; 50 Hz Fodpfxsz S Uxzj Aanogi Power consumption: 21.1 kW Max. fuse: 63 A Date of manufacture: 09.2023 If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: good (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 12A802697, cooling capacity: 911.3 kW (1,239.02 HP), type of input current: three-phase, type of cooling: water, overall weight: 4,492 kg, pressure: 24.5 bar, volume flow: 302.4 m³/h, total width: 900 mm, total length: 4,250 mm, total height: 2,060 mm, warranty duration: 3 months, Equipment: compressor, Used Carrier 30 HXC 265 water-cooled chiller operating on R134A. Complete with 2x Carrier 06NW2300S5EA-A00 & 1x Carrier 06NW1250S7EA-A00 semi-hermetic screw compressors, shell and tube condenser, shell and tube evaporator, 2 oil pumps, control cabinet with display. Specifications: Brand: Carrier Model: 30 HXC 265 Product type: Water-cooled chiller Capacity kW: 911.3 Capacity Ton: 259.1 Refrigerant: R134A Weight: 4492 kg Dimensions: 4250x900x2060 mm (LxWxH) Compressors: 2 Carrier 06NW2300S5EA-A00 & 1 Carrier 06NW1250S7EA-A00 Display: Carrier display Fsdpfx Aexz Ehaeanogi

Condition: used, Heck DVAS 180 Refrigeration System, 180 kW Professional, industrial refrigeration system from the premium manufacturer HECK Kältetechnik GmbH. The system is in very good condition for its age and has been reliably in operation until recently. Thanks to the modern refrigerant R513A, the system is future-proof and meets current environmental and efficiency standards. Production cooling with heat recovery Technical data (according to the nameplate): Manufacturer: HECK Kältetechnik GmbH Model / Type: DVAS 180 Machine No.: T-19307 Year of construction: 2019 Refrigerant: R513A (Max. filling weight: 98 kg) Operating voltage: 400 V / 50 Hz Operating current: 85.4 A (Max. operating current: 141 A) Max. operating pressure: ND 19 bar / HD 28 bar CE certified: Yes (Number 0036) Fedpfx Aozrlzzeanjgi Performance data & application area Refrigeration capacity: 180 kW – Ideal for the efficient cooling of large halls or commercial spaces. Heating capacity: 290 kW – Highly efficient air heating through the intelligent use of waste heat from the cooling process. Dehumidification capacity: approx. 100 liters per hour – Perfect for precise humidity control. Application areas: Thanks to these combined performance characteristics, the system is ideally suited for industrial production halls, large warehouses, logistics centers, or for demanding process cooling and commercial dehumidification. The following precise operating temperatures can be derived from the technical specifications and design data in the documentation for the Heck DVAS 180: 1. Refrigeration core area Evaporating temperature: The system is designed for an evaporating temperature of 6 °C. Condensation temperature (liquefaction): The water-cooled plate condenser operates at a condensation temperature of 43 °C. 2. Air-side temperature ranges (process air) Depending on which ventilation or unit (e.g. cabin, cooling zone or ADZ unit) is used, the air inlet and outlet temperatures vary: Standard cooling zone: Air inlet at 26.5 °C is cooled down to an air outlet temperature of 19 °C. Cabin air conditioning (ULA): Air inlet at 26 °C is conditioned to an air outlet temperature of 22 °C. Process air dehumidification (ADZ): The air enters at 26 °C and leaves the evaporator highly dehumidified at 10.3 °C. Reheating (ADZ unit): A water-cooled reheater can raise the cooled air from 10 °C back to 17.5 °C. 3. Water-side temperature ranges (cooling water / heat recovery) Plate condenser (condenser cooling): Designed for a water inlet of 32 °C and a water outlet of 38 °C (at a flow rate of 35 m³/h). Plate heat exchanger (heat recovery): Uses the hot gas energy to heat water from 42 °C to 47 °C. "Everything from a single source: We will be happy to offer you suitable bank financing for your project." More items - new and used - can be found in our shop! International shipping costs on request!

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, cooling capacity: 291 kW (395.65 HP), type of cooling: air, heating capacity: 324 kW (440.52 HP), aircooled Chiller Daikin EWYD290BZ SL, Heatpump Cooling cap.291 KW (85 refr.tons),Heating cap. 324 KW(100 refr.tons) 2 circuits with 2 semihermetic screw Fgjdez Hvwyspfx Aanoi compressors,inverter driven Shell+Tube evaporator, with integrated 1 pump R 134a tested,ready for operation

Condition: used, SINGLE Industrial Chiller / Water Cooler / Chiller SINGLE SKA-10-W/STK Cooling capacity 14.0 kW according to the nameplate Year of manufacture 2016 – Industrial chiller with touchscreen control Refrigerant converted to R452A For sale is a used industrial chiller from the manufacturer SINGLE Temperiertechnik GmbH, model SKA-10-W/STK. The chiller is suitable for cooling industrial equipment, machines, production systems, and process circuits. The unit features an integrated controller with a touchscreen interface. Technical data: Manufacturer: SINGLE Temperiertechnik GmbH Model: SKA-10-W/STK Type of equipment: Industrial chiller / Chiller Year of manufacture: 2016 Country of manufacture: Germany Cooling capacity according to the original nameplate: 14.0 kW Permissible temperature range TS according to the nameplate: -30 °C to +20 °C Refrigerant circuit: Current refrigerant according to specifications: R452A Original refrigerant: R507 Original filling quantity according to nameplate: 13.0 kg Current filling quantity after conversion: not confirmed The refrigeration system was converted to the refrigerant R452A. The original refrigerant specifications on the nameplate refer to the delivery condition with R507. The current filling quantity and the CO₂ equivalent must be confirmed separately after the conversion. Pressure specifications according to the original nameplate: Max. operating overpressure PS: 24 bar Setting pressure safety valve: 28 bar Test pressure PT: 27 bar Electrical data: Power connection: 400 V / 3~ / PE / 50 Hz Rated current: 41.7 A Fgsdpfx Aas Aay H Sonji Apparent power: 28.8 kVA Control / Operation: Touchscreen interface Display for three temperature control circuits (TCU 1–3) Display of process and temperature data Setpoint and actual value display Supply and return temperature display Flow display Modbus configuration menu Profibus status displays Alarm and operating status display Equipment: Industrial chiller with refrigeration circuit Integrated touchscreen control Electrical main switch Hydraulic connection lines and pipe connections Overflow connection Drain connection with shut-off valve Housing with ventilation openings Closed industrial housing Castors Equipment as shown in the pictures Areas of application: Industrial cooling Process cooling Machine cooling Production systems Machine tools Plastics processing Test bench cooling Temperature control and cooling circuits General industrial cooling applications Dimensions / Transport: Dimensions (L × W × H): not yet determined Unladen weight according to the nameplate: 1,020 kg The exact external dimensions must be determined before shipment. The actual transport weight may vary depending on residual media, accessories, and packaging. Condition: Used Year of manufacture 2016 Refrigerant converted to R452A Optical condition as shown in the pictures Signs of use and some deposits on the connections. Scope of delivery: 1 × SINGLE SKA-10-W/STK industrial chiller Integrated touchscreen control Connections and equipment as shown in the pictures Scope of delivery otherwise as shown in the pictures. Shipping by freight forwarder possible upon request. Subject to change, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: used, Year of construction: 2017, functionality: unexamined, Riedel L24/26/23 TR5-P / 01.01G Fsdpfx Aaozln Rxonegi - Delivery possible for an additional charge.

Condition: like new (used), Year of construction: 2026, functionality: fully functional, cooling capacity: 327 kW (444.60 HP), type of cooling: air, low hours 2 circuits, R410a, scroll compressors Fgodpfxez Hvz Ee Aansi with integrated pump and tank Cooling Capacity: 327KW (100 refr.tons)

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, cooling capacity: 950 kW (1,291.64 HP), overall weight: 8,300 kg, total width: 2,260 mm, total length: 9,600 mm, total height: 2,300 mm, Equipment: cooling unit, Five Carrier chillers are available, all in excellent working condition. Fodpfx Aszz Itxsansgi