saw blade diameter 400 mm
cutting diameter 130 mm
stroke 135 mm
mitter cutting - all-position 0-45 °
turning speed range 1420 / 2840 U/min
capacity 45 degrees: square 110 mm
capacity 45 degrees: flat 50 x 240 mm
capacity 90 degrees: flat 95 x 240 mm
capacity 90 degrees: round 130 mm
capacity 90 degrees: square 120 mm
voltage 400 V
total power requirement 3,7 / 4,5 kW
weight of the machine ca. 600 kg
dimensions of the machine ca. 1,15 x 1,20 x 1,60 m
- Serial-No.: 102752
- cutting r...
Aluminium double mitre saw make ELUMATEC type DG 79
Masch.# 31466, year of construction 1994
Saw blade diameter 380 mm
Saw blade bore 32 mm
cutting length 4500 mm
Smallest cutting length 500 mm
Swivel range R + L Detent points 15° 22.5° 30° 45
Angle R + L infinitely variable 0 - 45°
Cutting area sh. Sectional diagram
Compressed air supply 7 bar
Saw blade speed 3000 rpm.
Drive power per motor 2 x 3000 W
Weight approx. 490 kg
- manual cutting length adjustment with digi...
saw blade diameter 370 mm
cutting range round 115 mm
cutting range square 105 mm
cutting range flat 70 x 240 mm
cutting length min. 730 mm
cutting lenght max. 4000 mm
saw blade turning speeds 1250 / 2500 U/min
table rotating 180 °
stroke 120 mm
feed stepless 0 - 500 mm/min
capacity 45 degrees: square 95 mm
capacity 45 degrees: flat 50 x 200 mm
cutting speed 1250 / 2500 m/min
weight of the machine ca. 1,1 t
dimensions of the machine ca. 5,00 x 1,30 x 2,00 m
- Fabr. - No.: 2823...
Double mitre saw WEGOMA SD 25 E with elektronic positioning system BECKHOFF/ diskette
- Saw blades diameter 500 mm
- Big cutting capacity, 2 profiles can be cut simultaneously
- Hydropneumatic saw feed
- Maximum length of cut about 5.000 mm
- Minimum length of cut about 300 mm
- Tilting range 45° - 90° 45 °
A suitable extraction system is possible against additional payment.
(Additional + 1.200 EUR)
51005050 controller DARC COMPACT VA04-20-10-xx
You have the following faults on your Rapid DGL with PCE 5000 control
101N1 Undervoltage in intermediate circuit
102N1 Undervoltage in intermediate circuit
103N1 Undervoltage in intermediate circuit
We have plug and play solutions at fair conditions
CNC - double mitre saw make ELUMATEC type DG 104
machine # 25647 year of construction 1989
Saw blade diameter 420 mm
Saw blade bore 30 mm
cutting length 4000 mm
Inclination range 45 + 90°
Saw blade speed 2800 rpm.
Cutting range sh. Diagram
small cutting length 335 mm
Power 2 x 4000 W
Dimensions 6050 x 1600 x 1450 mm
Weight approx. 1520 kg
- CNC control E 255
used, in good condition
Double mitre saw Fabr. EISELE EMMEGI type TU VISA 2 / 5
Saw blade diameter 450 mm
Section length of min. 240 mm
Section length of 5000 mm
2 x 2.5 kW
External dimensions approx. 6500 x 1400 x 1600 mm
needed, like on the stock available
as spare part (the control is available but broken) € 2.500,--
The Machineseeker Trust Seal gives buyers the opportunity to see, at a glance, whether they are dealing with a trustworthy seller.
What do we verify?
Check of trade licence or commercial register extract
Check the address of the dealer
Validation of Bank connection
Verification of accessibility to main phone number
Credit report may not contain negative criteria
Buyer complaints can lead to withdrawal of the seal
What does this mean for the seller?
After successful verification, we will include the seal in your advertisements on Machineseeker. In this way, you signal to every potential buyer the seriousness of your company, checked by an independent body. This creates buyer confidence and increases the probability of successfully selling machines. In addition, you have the option of including the Machineseeker Trust Seal on your homepage and in business letters.
Try our app for used machines now!
Machineseeker app for iPhone and Android.
All information, offers and prices on this site are subject to change and non-binding!
By using this website, you acknowledge and agree to our Terms & Conditions and Privacy Statement.
Designated trademarks belong to their respective holders.
Machineseeker Group GmbH does not accept any liability for the content of linked websites.