Year of construction: 1999, Condition: used, machine/vehicle number: 19084, Weight: approx. 3500 kg, max. load capacity: 750 kg, with vacuum beam, span: approx. 20,000 mm, with 15 two-sided storage racks, mostly made by HEGLA, built approx. 1990 - 1995, load capacity: 10 kg per side, mobile shelving, metal, painted, green, with 12 units and electric drive, rail-guided, with stationary loading, built in 2006 Duohxjwacr Ao Difujt

Condition: good (used), Year of construction: 2007, Functionality: fully functional, input voltage: 400 V, type of input current: AC, Lisec gas filling press for maximum unit sizes of 3500 x 2500 mm, year 2007, consisting of: RSVN-35/25, frame set section, year 2007 Djhowca Hpex Difueut RTVB-15/25ST, extension conveyor for measuring section, year 2007 RTVB-15/25MZU2, measuring section for gas filling press, year 2007 FPS-35/25U2, gas filling press for Argon, year 2007 RTVB-15/25ST, press outlet conveyor, year 2007 UKL-35/25, tilt table, year 2007

Condition: good (used), Machine Description This machine is in very good condition. It was made in France. Specifications: Glass Thickness: 3 - 25 mm Minimum Glass Size: 80 x 120 mm Maximum Glass Size: 3000 x 3000 mm (can be larger) Speed: 0.4 - 4.2 m/min Dimensions: 5800 x 1600 x 2500 mm Weight: 2500 kg Djhxewig Awo Difusut

Year of construction: 2021, Condition: ready for operation (used), Functionality: fully functional, Machine no longer required. Ideal dual sided protective film applicator. Duehx Disv U Spbjfujt

Condition: used, storage rack system Dohxswii Nmo Difusut 12 position

Condition: used, Year of construction: 2019, machine/vehicle number: 1000032529, Power: 23.5 kW, travel distances: X-axis: 4160 mm, Y-axis: 2400 mm, Z-axis: 240 mm, with additional C-axis, rotation: 360 degrees, 40-station tool changer, separate control cabinet system, made by RITTAL, 12 suction cups and 15 tool holders, some equipped with tools Dshxjwav S Ns Difusut

Condition: used, Year of construction: 2000, laminated glass cutting table Dushx Difjwii Naeujt

Year of construction: 2023, Condition: used, Consisting of: Cleanroom access with 1-door, glazed, with SIEMENS control system and touch panel, as well as enclosure, integrated ceiling crane system, on 2 travel rails, mounted on vertical struts, bolted, with electric chain hoist, ABUS, and manipulator, HEGLA, type: VHG-500H, built in 2023, load capacity: 500 kg, extraction, temperature control, and vacuum traverse, HEGLA, built in 2023, max. load capacity: 250 kg Dshxewacrij Difuout

Condition: excellent (used), Year of construction: 2016, Functionality: fully functional, Straight line edger Duehx Diswii I Ajfuet 9 wheels

Condition: used, Year of construction: 2000, machine/vehicle number: 2083, Base area: approx. 3000x6000 mm, with cutting bridge, with 2 cutting heads, transfer crushing table, table size: approx. 3000x8000 mm, tilting table for manual loading Duohxjwactyo Difujt

Condition: ready for operation (used), Year of construction: 2011, Functionality: fully functional, total length: 2,500 mm, total width: 2,000 mm, VSA-25/20D1 Dshx Dievyzatsfueut RTVB-11-20ST SSV-20 Lisec VSA-25-20D1 S-IGL-1878

Year of construction: 2023, Condition: used, machine/vehicle number: 22230057, with roller support, material infeed, washing unit, make MALNATI, type: 2300TN, year of manufacture 2023, serial no. 22230057, power: 50 kW, attached extraction unit, separate control cabinet, discharge table, control make WEINTEC Duehx Dijwactgefuet

Condition: ready for operation (used), Year of construction: 2011, Functionality: fully functional, corck applicator Dehxewii Ice Difuout 2000x2500mm Right-Left

Condition: used, Year of construction: 2017, machine/vehicle number: 30-3200, Consisting of: material feed, ball roller table, portal feed around vacuum traverse, grinding unit, power: 117 kW, separate control cabinet with operating unit, control system, SIEMENS, turning table, grinding unit, power: 117 kW, material discharge, drilling and water jet unit, power: 58 kW, serial no. 3-3200-38, separate control cabinet system, RITTAL, with cooling unit, and washing system, TECWASHER, type: F.18-S-B2 B-CD, built in 2017, serial no. 30-3200-08, control system, SIEMENS, with TOUCHPANEL, attached extraction system, discharge table and video surveillance Duohx Dijwav S Ajfuet

Condition: ready for operation (used), Year of construction: 2011, Functionality: fully functional, RTVB-11-20ST inlet NWLD-25-20 excluding: with measuring Dshx Dewii H Esifuout FPS-25-20U2 gas press

Condition: used, Year of construction: 2003, machine/vehicle number: 30-1712, Power: 165 kW, consisting of: material feed, ball roller table, vacuum traverse, gantry crane system, grinding unit, turning table, grinding unit, material discharge, gantry drilling unit, type: 2400T, glass washing machine, control unit with control system, made by SIEMENS, separate control cabinet system, made by RITTAL, monitoring monitor and water treatment system, built in 2015. NOTE: Maintenance required. Djhx Difjwacrvousut

Condition: ready for operation (used), Year of construction: 2012, Left-Right from back side loding conveyor FRS 25-Z Duohxewii Hlo Difujt LBH 25 ARS RFVS-U FRS 25 -A cy 2012 - 2018 Butyleuse 05 (2)

Condition: used, Year of construction: 2000, Consisting of: Cutting/breaking table, make HEGLA, type: OPTIMAX 6032ES, weight: approx. 3500 kg, base area: approx. 3000x8000 mm, with cutting bridge and tilting table Dehxjwactaj Difueut

Condition: like new (used), Year of construction: 2021, Functionality: fully functional, Vertical infeed transport - Vertical 2600 mm washing machine with drying - Tilting table (behind the washing machine) - Horizontal outfeed transport - tilting table (discharge) Description of Line Components Pos. 1 Loading station, 250kg With the help of the suction frame, the sheets are taken off the glass rack and they are placed vertically on the tilting table in front of the washing machine. Differences in inclination can be compensated for by tilting the suction frame. The suction frame has a rotating function to collect short formats in an upright position and to place them down on the long edge. Light crane Trolley crane with a lift system traveling on rails by hand, which are standing on steel supports. lift Electrical lifting and lowering, horizontal turning and tilting of loads. Generation of vacuum via vacuum pump system with check and display of the vacuum power. A central operation desk with integrated control buttons allows easy signal activation of the single functions. In case of pressure loss in the dangerous area, it is displayed and acoustic signal is given. Pos. 2 Vertical Inlet Transport WM The vertical transport serves as inlet transport in front of the washing machine. In horizontal position, the glass sheets are placed on Vulkollan transport rollers. In vertical position transport rollers with Perbunan rings are driven via screw wheels. The transport rollers are arranged in drag bearings placed on a solid welded frame. Small glass sheets are placed manually on the transport frame. After placing the glass sheet, the transport is activated by push button. Pos. 3 Vertical Washing Machine with Drying Djhx Dowii Hfsifusut The washing machine body, washing chambers, recirculation vats and the drying nozzles are made entirely of stainless steel. The rubber rings of the transport rollers are resistant to cutting oil. Flat jet spraying nozzles in the pre-rinsing section are fed with city water. Coarse dirt particles removed are directly led into the drain. This reduces contamination of the DI-water circuit for the washing machine. The washing machine is equipped with energy and water saving cascade system. Pre-rinsing section with Flat jet spraying nozzles Washing section with 3 pairs of brushes, 3 vats and 3 pumps Acid section with 1 pair of brushes, 1 vat and 1 pump Drying section with 2 pairs of drying nozzles provide dry edges. Pos. 4 Vertical Inspection Transport with glass Activation Section The transport serves as Activation Section for the glass surface and as Inspection and Storage Transport before the Tilting Table. Driven by a geared motor, A.C., frequency-controlled. All the rollers are arranged in drag bearings with a single drive operating pairs of spiral-toothed gear wheels. Pos. 5 Tilting Table with Horizontal Transport and Vertical Inspection Transport rollers, which are individually driven by worm gear wheels are placed on a solid welded frame. The transport rollers are arranged in drag bearings. Tilting arms are in horizontal position. The integrated tilting table is made of several profile arms which can be tilted (electro-mechanical by crank mechanism) from the horizontal position by 84°. The tilting speed has its lowest speed at the beginning and at the end of the movement. The glass is tilted from vertical to the horizontal position. If no glass happens to be in the Pre-Heating oven the glass runs into the oven.

Condition: used, Year of construction: 1998, Functionality: fully functional, Lisec / VHW/20 V8 / Construction Year: 1998 / High-performance washing machine with 8 brushes Min. size: 180x250mm Max. size: 2000x3000mm Dshx Dewii Eujifusut Direction of rotation: right/left Speed: 0-15m/min Glass thickness: 0-30mm With inlet and outlet Reconstructed in 2010 and changed to LENZE Servos / GMR Stock Place: GMR ES

Condition: used, Year of construction: 1998, Functionality: fully functional, Straight-line edgers Duehswii D Rjx Difust

Condition: used, Year of construction: 2005, Functionality: fully functional, Model 1500 Djhx Difjwii D Djujut Max. glass dimensions: 1500 x 3000 mm Z -axis (vertical) 185 mm. 3250x1620mm WORKTABLE It allows multiple placements. It is covered with synthetic material and the same operating head rectifies it for a perfect planarity. GMR Stock Place: GMR ES

Condition: used, Year of construction: 2004, Functionality: fully functional, Float and lami cutting line R-L Dushxewii A Tj Difuot Loader ATL-60/30 Float cutting ESL-60/30RS-S Lami cutting VB45 Breakout BTH-60/30

Condition: used, Year of construction: 2004, 3300x6000mm ESL-60/30RS Combined Edge Deletion and Cutting Machine for Low-E Coated Glass Sheets Djhx Dewii Ayoifujut Options: Shapes according to the LiSEC shape catalogue  Automatic return system  3rd oil supply unit  Fully automatic tool changer for cutting wheels  Dynamic cleaning brush on the top and bottom  Dynamic cleaning brush only on the bottom  Integrated device for cutting off residual glass (RP-I)

Condition: like new (used), Year of construction: 2023, total length: 2,200 mm, total width: 1,100 mm, total height: 2,250 mm, working height: 2,000 mm, load capacity: 2,000 kg, Type-A2200-ISO2000-G4 Bleu metal rack Dimensions 2200 x 1100 x 2250 with crane hook loading field W 1100 x L 2200 x H 2000 mm Loading bottoms 2 x 390 mm A-Type EC 143 kg Max load 2000kg 23 pieces in stock Dshjwii Atsx Difusut Option: 20 bottom trolleys Optional: security bars / belt tension slats matching undercrriages RAL 5017 (available 15 pcs)