Mater S.a.

Condition: used, Year of construction: 1998, functionality: fully functional, Travel X/Y/Z: 1800mm/850mm/750mm Spindle nose to table distance: 200mm-950mm Spindle center to column distance: 920mm Table dimensions X/Y: 2000mm/800mm Max. table load: 2200kg Tool holder: NT50 Speed: 6000 rpm Feed: 5m/min Rapid traverse: 12m/min Machine dimensions X/Y/Z: approx. 5700mm/3850mm/3350mm Weight: approx. 16,500kg Control: Heidenhain Operating hours: approx. 51,000h Spindle hours: approx. 26,000h Documentation available On-site inspection possible. Fsdpey N Suxjfx Apwsgb

Condition: used, Year of construction: 1999, - BAZ Johnford VMC 850 Fsdpfx Apoy N Sg Iswogb - Year of manufacture: 1999 - 24-position double-arm tool changer - Table size: 1000x500mm - Spindle speed: 8,000 rpm - Travel: 800x450mm - Control: Fanuc Oi - Machine is operational and can be inspected under power with cutting demonstration

Condition: ready for operation (used), Year of construction: 1999, Available immediately ex location: CNC Vertical Machining Center EMCO Type VMC 600 Year of manufacture: 1999 Heidenhain TNC 426 D Electronic handwheel Travel X/Y/Z: 1200/410/370 mm SK 40 24-position tool magazine Fsdey N Adqjpfx Apwegb Speeds up to 6,000 rpm 3 vices Weight: 4 t Price: EUR 6,500.-- plus VAT, ex location SK 40

Condition: used, Year of construction: 2013, x-travel 500 mm Fgsdpsy Nn Dvofx Apweb y-travel 400 mm z-travel 330 mm weight of the machine ca. 2100 kg

Condition: used, Year of construction: 2022, TAKUMI V12 VERTICAL MACHINING CENTER YEAR: 2022 MANUFACTURER: TAKUMI PRECISION CO LTD., TAIWAN MODEL: V12 CNC CONTROL: HEIDENHAIN Machine Specifications Movements & Range • X-axis travel: 1200 mm • Y-axis travel: 660 mm • Z-axis travel: 610 mm • Distance from floor to table surface: 931 mm • Distance spindle nose to table surface: 150 – 760 mm Fgedpfey Nkg Tex Apweb • Distance spindle center to column: 700 mm Pallet • Pallet size: 1250 x 650 mm • Pallet loading capacity: 1200 kg • Pallet T-slot (number x width x pitch): 18 x 100 mm x 5 Spindle • Spindle speed: 12,000 rpm • Spindle taper: BT 40 Feed Rates • Rapid traverse (X/Y/Z): 24 / 24 / 20 m/min • Cutting feed (X/Y/Z): 1 ~ 8000 mm/min • Manual feed rate: 0 – 1260 mm/min • Linear encoders Automatic Tool Changer BT40 • Number of tool positions: 24 • Max. tool weight: 7 kg • Max. adjacent tool diameter: 80 mm • Max. tool diameter (with empty adjacent pocket): 150 mm • Max. tool length: 300 mm • Tool selection: Random, bi-directional Machine is supplied with chip conveyor, manuals, and CE declaration of conformity. All technical data provided is for reference only and may be subject to change without notice; therefore, it is not binding.

Condition: used, Year of construction: 2021, x-travel 1270 mm y-travel 660 mm z-travel 610 mm Fgodoy Nfabspfx Apwob weight of the machine ca. 8680 kg

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, travel distance X-axis: 1,660 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, workpiece length (max.): 4,000 mm, workpiece width (max.): 655 mm, workpiece height (max.): 640 mm, workpiece weight (max.): 1,000 kg, spindle speed (max.): 12,000 rpm, coolant supply: 16 bar, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, For sale here is a Mazak VTC 200C II including a Kitagawa rotary table (4th axis). The machine is in very good condition and immediately ready for operation. Inspection under power is possible at any time. Transport and installation can be offered upon request. Technical Data: Control: MAZATROL 640M Machine width: 2819 mm Machine height: 2870 mm Machine weight: 9100 kg Table length: 2000 mm Table width: 510 mm X-axis travel: 1660 mm Y-axis travel: 510 mm Z-axis travel: 510 mm Fjdpjy Ndzdefx Apwjgb Equipment: - Number of tools: 30 - Spindle power: 15 kW - Spindle speed: 12,000 RPM - Through-spindle coolant 16 bar - External coolant - Renishaw measuring probe OMP60 - Kitagawa 4th axis - Automatic warm-up function The main spindle was replaced or renewed in 2025.

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 1,500 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 660 mm, controller manufacturer: OKUMA, controller model: OSP-P300M, table load: 1,500 kg, overall weight: 9,000 kg, spindle speed (max.): 15,000 rpm, spindle motor power: 30,000 W, number of slots in tool magazine: 32, number of axes: 3, This 3-axis Okuma MB-66VA was manufactured in 2016. It features an X-axis travel of 1500 mm, Y-axis travel of 660 mm, and Z-axis travel of 660 mm. The machine is equipped with a powerful 30 kW spindle, capable of reaching speeds up to 15,000 rpm, and has a tool magazine with 32 positions. If you are looking to get high-quality machining capabilities, consider the Okuma MB-66VA vertical machining centre we have for sale. Contact us for further details. Fsdpey Ndp Isfx Apwsgb • Table size: 1500 × 660 mm Technical Specification Taper Size BT 50

Condition: ready for operation (used), Year of construction: 1993, travel distance X-axis: 1,500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 750 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 355, spindle speed (max.): 1,800 rpm, spindle motor power: 20,000 W, number of axes: 5, This 5-axis SHW UF-5 vertical machining centre was manufactured in 1993. It features a table longitudinal travel of 1500 mm, spindle head vertical travel of 1000 mm, and a spindle head longitudinal travel of 750 mm. The machine includes a rotary table with a diameter of 1400 mm and a maximum table load of approximately 4000 kp. If you are looking to get high-quality machining capabilities, consider the SHW UF-5 machine we have for sale. Contact us for further details. • Quill in milling head: 115 mm • Feed drives and feeds: • Individual drives (X, Y, Z) • Infinitely variable feeds (X, Y, Z): 2–8000 mm/min • Rapid traverse (X, Y, Z): 8000 mm/min • Milling spindle drive: • DC motor drive power: 20 kW • Speed range (infinitely variable): 36–1800 rpm • Horizontal and vertical spindle • Spindle taper: ISO 50 • Horizontal spindle diameter (front bearing): 95 mm • Tool clamping force: • Horizontal spindle: 16,000 N Fgedpey Ndmmefx Apwob • Vertical spindle: 10,000 N Additional equipment • Rotary table RT 5D: • Table plate with 7 T-slots, 1 central slot • Table diameter: Ø 1400 mm • T-slot size: 22 H7 (DIN 650) • Center bore: 160 mm • Max. rotational speed: 2.5 min⁻¹ • Max. table load: approx. 4000 kp • Table weight: approx. 2800 kg Technical Specification Taper Size ISO 50

Condition: excellent (used), Year of construction: 2016, CNC machining center WAGNER WBE 1600 R Year: 2016 Control: Siemens 840 D Technical data: X-axis travel: 1600 mm Y-axis travel: 800 mm Z-axis travel: 630 mm Table dimensions: 1900 x 700 mm Spindle speed: 8000 rpm SK 40 Videos of the machine available Fgedpfx Ajy Na Ugspwsb

Condition: like new (used), Year of construction: 2021, operating hours: 694 h, functionality: fully functional, travel distance X-axis: 1,600 mm, travel distance Y-axis: 820 mm, travel distance Z-axis: 660 mm, torque: 979 Nm, controller manufacturer: Heidenhain, controller model: TNC640, spindle speed (max.): 6,000 rpm, operating hours of spindle: 694 h, coolant supply: 20 bar, spindle nose: SK50, number of slots in tool magazine: 32, Equipment: chip conveyor, documentation/manual, Hartford HCMC 1682 – Heidenhain TNC640, used – Year of manufacture 2021 – low hours! Hartford vertical CNC machining center equipped with Heidenhain TNC640 control, oversized precision flat guides in X, Y, and Z axes, moveable clamping table, and a powerful main spindle with SK50 tool holder. The machine features a closed cooling circuit for the spindle and an automatic two-stage gearbox, spindle speed n = 10–6,000 rpm, max. power Pmax = 38 kW, max. torque Mmax = 979 Nm, a 32-position tool magazine with quick-change arm, and an ergonomically optimized work area enclosure. The enclosure has electronically monitored front sliding doors with inspection windows, as well as loading/unloading access to the tool magazine from the rear. Spindle: SK50, 38 kW, max. 979 Nm / max. 6,000 rpm Air cooling with compressed air nozzle at the spindle nose, cooling via M-function is programmable. Working area: X-axis, longitudinal: 1,600 mm Y-axis, lateral: 820 mm Z-axis, vertical: 660 mm Clamping table size: 1,750 x 820 mm Max. table load: 2,200 kg T-slots: 5 units T-slot spacing: 150 mm T-slot width: 18 mm Tool magazine: 32 positions Tool diameter: Ø 125 mm Max. tool length: 350 mm Max. tool weight: 20 kg Cooling system: Coolant: External coolant supply nozzles installed at the spindle nose (vertical slide). Coolant returns via two transverse and one longitudinal conveyor into the coolant tank. The coolant is pumped from the tank as required (via M-function or switch on the control panel) through the nozzles. Mechanical sieves are provided in the coolant tank for coolant filtration. Optional: For internal coolant supply (ICS), a high-pressure pump with a simple filter system is available. When ICS is activated, coolant is pumped from the tank through the high-pressure pump and filter system. Electronic handwheel Oil skimmer in the cooling system Blow-off and rinse guns Chip conveyor Automatic wireless 3D probe (Renishaw) for workpiece probing Fjdpey I Uzrjfx Apwogb Automatic tool breakage control (Renishaw) The machine has only been used for a single job. As that order is no longer present, the machine is surplus to requirements. This is a very robust machine with high spindle performance – ideal for heavy-duty machining operations. The machine can be inspected under power at its current location. Note: The clamping devices shown in the pictures are not part of the delivery! Price: ex works Dismantling, transport, and commissioning can be offered on request!

Condition: good (used), Year of construction: 2007, functionality: fully functional, Year of manufacture 2007 Fjdpey I Dpxsfx Apwsgb Fanuc control system Quaser 1500/750/750

Condition: used, Year of construction: 2018, • Brand: FAGIMA FRESATRICI • Model: JAZZ L • Year of manufacture: 2018 • 5 axes • Fixed table dimensions: 1,250x800 mm, maximum load capacity: 1,000 kg • Rotary table dimensions: 600x600 mm, maximum load capacity: 500 kg • Total travels: 2,000x600x550 mm • Travels on fixed table: 1,250x600x550 mm • Travels on rotary table: 600x600x550 mm Fedjy I A Dbjpfx Apwsgb • Equipped with: scraping chip conveyor, workpiece measurement probe, through-spindle coolant system • The machine is not connected to power and is partially disassembled; therefore, it has not been possible to verify its correct operation. • Externally, it is in good general condition, with no damages or deformations detected.

Condition: new, Travel X / Y / Z axes: 1020 / 550 / 635 mm Table size: 1200 x 550 mm Spindle speed: 12,000 rpm Fjdjy Inulepfx Apwogb Spindle interface: 40 BBT Control: Fanuc 0i MF Plus Dimensions: 480 x 230 x 255 cm Weight: 8,000 kg Equipment: Tool stations: 30 Coolant through spindle 20 bar Air through spindle (must be ordered with CTS) Chip conveyor Chip container Work area chip flushing

Condition: used, Year of construction: 2009, Doosan Mynx 750/50 4 Axis Vertical Machining Centre with Fanuc Series 21i-MB CNC Control, Kitagawa MR320RAE04 4th Axis Unit 310mm 3 Jaw Chuck, Table Size 1600mm x 750mm, 40 Tool ATC, BT50 Spindle Taper, Filtermist FX7002 Oil Mist Extractor, Kaukan Chiller Unit, Profluid MCF 20 Coolant Pressure Filter Unit, Machine Weight 13500kg. S/No. MYNX 7500373 (2009) Includes Work Bench, Vice and Various BT50 Spindle Tool Holders. Country of Origin: Korea Fodoy Ic Dujpfx Apwegb Location: This lot is located in Birmingham, UK. A charge of £550 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Condition: good (used), Year of construction: 2007, Traverses X Y Z: 1270 x 660 x 635mm, Table 1321 x 584mm, Spindle Speed 0 – 7500rpm, Spindle taper BT 40, Spindle Motor 20Hp, HAAS Control, 20 Station tool change, coolant Fgjdey Eyauopfx Apwsb

Condition: good (used), Year of construction: 2010, functionality: fully functional, Matec 30 L, year of manufacture 2010, Heidenhain iTNC 530 control, travel X/Y/Z 1300/600/700 mm, spindle speed up to 12,000 rpm, HSK 63 - A tool holder, electronic handwheel, ICS 20 bar, paper band filter, 80-position tool magazine, full enclosure of work area, direct measuring systems, chip conveyor, bellows with steel lamellae, 3D measuring probe, laser measuring device. Fedpfx Apsy Ev N Eewegb

Condition: used, TECHNICAL DETAILS - Number of axes : 5 MILLING SPINDLE - Tool holder type : HSK63 - Spindle power : 22 [kW] - Spindle speeds : 12000 [rpm] Fsdpfxey Er Hyo Apwjgb LINEAR AXES - Travels on X/Y/Z axes : 1250 / 660 / 540 [mm] - Rapid traverses rates (X/Y/Z) : 40 / 40 / 32 [mm/min] - Cutting feed rates (X/Y/Z) : 32 [m/min] A ROTARY AXIS - Travel : [°] - C ROTARY AXIS - Speed : 1000 [rpm] - Travel : 360 [°] TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 48 TABLE - Maximum workpiece diameter : 730 x 500 [mm] - Maximum weight upon table : 500 [kg] - Distance table / spindle nose (min./max.) : 127 - 660 [mm] POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 2.940 x 3.367 [mm] - Machine height : 3.541 [mm] - Machine weight : 13.000 [kg] MACHINE HOURS - Number of hours under power : 57.114 [h] - Number of working hours : 23.087 [h] EQUIPMENT - CNC : OSP-P200M - Turning option - Coolant tank * with paper filtering unit - Coolant through spindle - Chips conveyor - Oil mist extractor : LOSMA - Spindle cooling unit - Tool probe : RENISHAW TS27R - Workpiece probe : RENISHAW OMP60

Condition: good (used), Year of construction: 2007, functionality: fully functional, Technical details x-travel 1200 mm y-travel 600 mm z-travel 600 mm Control Heidenhain iTNC 530 spindle speed: 6000 1/min. spindle taper 50 SK spindle drive (S1) 10 kW table surface area 1300 x 600 mm table load 1200 kg feed speeds 1-10000 mm/min rapid travel x/y/z 20/20/15 m/min distance table - lower edge spindle 125-725 mm total power requirement 25 kVA weight of the machine ca. 7,5 t dimensions of machine 3600 x 2300 x 3000 mm Additional information Equipped with: * CNC control Heidenhain iTNC 530 * Electr. portable handwheel * Spindle oil cooler * Tool changer 24-pos., double arm changer - Max. tool diameter 80/150 mm - Max. tool length 250 mm - Max. tool weight 8 kg * Preparation for hydraulic machine vice * Preparation for 3-D measuring probes * Chip conveyor * Coolant system, coolant through spindle 20 bar * Machine documentation Working hours (date 1st. November 2024): - Control on: 60.818 h Fedpfoy Enyvox Apwegb - Machine on: 59.598 h - Program cycle: 22.283 h - Spindel on: 19.522 h

Condition: used, Year of construction: 1999, functionality: limited functionality, travel distance X-axis: 1,250 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 685 mm, total height: 3,030 mm, total length: 4,280 mm, total width: 2,860 mm, table width: 680 mm, table length: 1,400 mm, overall weight: 8,000 kg, Equipment: chip conveyor, documentation/manual, - CE marking available: Yes - CE certificate available: No - Control: CNC - Control system brand: Heidenhain - Control system type: 426-M - Number of axes [pcs]: 3 - X-axis travel [mm]: 1250 - Y-axis travel [mm]: 600 - Z-axis travel [mm]: 685 - Table length [mm]: 1400 - Table width [mm]: 680 - Min. spindle speed [rpm]: 40 - Max. spindle speed [rpm]: 12000 - Transport dimensions: 2860mm x 4280mm x 3030mm (w x l x h) - Transport weight [kg]: 8000kg - Cooling system: External cooling + external air blast + internal coolant supply (IKZ) - Tool holder: SK40 - Magazine positions: 21 Special feature: Unresolved fault in tool magazine VAT: The stated price is subject to VAT You are welcome to inspect the machine, it is under power. Sale is only to commercial customers, with exclusion of any warranty (sold as seen). Fgedpfx Apey D Ndaswjb Dismantling, collection, and transport are to be arranged by the buyer. A 10-ton overhead crane is available on site. All company names and trademarks are the property of their respective owners and are used for identification and descriptive purposes only. Deviations from technical data and errors in the item description may occur and are reserved.

Condition: good (used), Year of construction: 2008, Year of manufacture: 2008 Control system: Heidenhain itnc 530 Gearbox, 6000 rpm 40 tools, SK 50 X-axis travel: 1,400 mm Y-axis travel: 800 mm Z-axis travel: 700 mm Rated apparent power: 40 kVA Dimensions approx. Overall height: 2,900 mm Overall length: 4,000 mm Overall width: 3,500 mm Table width: 1,500 mm Fgodpfxsy Dffte Apwob Table length: 800 mm Table load capacity: 1,400 kg Max. speed: 6,000 rpm Total weight: 12,000 kg Handwheel Spindle cooler Internal coolant supply 20 bar Separate tank approx. 500 l Chip conveyor Immediately available.

Condition: ready for operation (used), Year of construction: 2014, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 800 mm, table load: 4,600 kg, overall weight: 18,600 kg, spindle speed (max.): 8,000 rpm, number of axes: 3, This 3-axis Johnford VMC-1600S was manufactured in 2014. It features a longitudinal travel of 1600 mm, cross travel of 1100 mm, and vertical travel of 800 mm. The machine has a robust table working surface of 1800 x 1000 mm and a maximum table load capacity of 4600 kg. If you are looking to get high-quality milling capabilities, consider the Johnford VMC-1600S vertical machining centre we have for sale. Contact us for further details. • Table working surface: 70.9” x 39.4” (1800 x 1000 mm) • Spindle nose to table: 5.9”–37.4” (150–950 mm) • Spindle center to column: 45.3” (1150 mm) • Spindle taper: • VMC-1600S: BT-40 / CAT-40 • VMC-1600SHD: BT-50 / CAT-50 • Spindle diameter: • VMC-1600S: 2.75” (70 mm) • VMC-1600SHD: 3.9” (100 mm) • Spindle speed: • VMC-1600S: Auto Hi-Lo Gear 80–8000 rpm • VMC-1600SHD: Auto Hi-Lo Gear 10–4500 rpm • Spindle motor: • VMC-1600S: 15/10 HP (15/20 HP optional) • VMC-1600SHD: 25/20 HP • Rapid traverse (X/Y/Z): 18 / 18 / 12 m/min • Feed (spindle): 1–12,000 mm/min • Tool selection: Bi-direction random type, shortest path • Number of tools: • VMC-1600S: Armless 24; Arm type 24/32 (optional) • VMC-1600SHD: Armless 20; Arm type 24/32 (optional) • Max tool diameter: • VMC-1600S: 4” (100 mm) • VMC-1600SHD: 9.8” (250 mm) • Max tool length: • VMC-1600S: 12.5” (320 mm) • VMC-1600SHD: 15.7” (400 mm) • Max tool weight: Fedoy A Ik Aspfx Apwjgb • VMC-1600S: 22 lbs (10 kg) • VMC-1600SHD: 33 lbs (15 kg) • Floor space: 177.2” x 209.8” (4500 x 5330 mm) • X/Y/Z ballscrew diameter: φ50 / φ63 / φ50 • Cutting capacity (S45C): • Milling: 180 cc/min (S) / 320 cc/min (SHD) • Drilling: φ40 mm (S) / φ52 mm (SHD) • Tapping: M30 x P3.5 (S) / M50 x P4.5 (SHD)

Condition: used, Year of construction: 2008, travel distance X-axis: 1,300 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller model: Fagor 8055i PLUS-M, workpiece weight (max.): 8 kg, table width: 610 mm, table length: 1,440 mm, overall weight: 6,800 kg, spindle speed (max.): 8,000 rpm, number of slots in tool magazine: 24, CNC machining center Brand: Pinnacle Model: LV-126 Year: 2008 Weight: 6,800 kg CNC: Fagor 8055i PLUS-M Travel (X, Y, Z): 1300, 610, 610 mm Work table: 1,440 x 610 mm Tool changer: 24 tools Maximum tool weight: 8 kg Spindle speed: 8,000 rpm Taper: ISO 40 Linear guides: Class P, 45 mm width Ballscrew: 40 mm, C3 precision Axes: 3 Fedoy Axdgepfx Apwsgb Machine from IAIN Mecanizados workshop in Hospitalet de Llobregat. Visits can be arranged to view the machine on site.

Condition: used, Year of construction: 2014, travel distance X-axis: 1,500 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller model: Fagor 8055 M, table height: 610 mm, table length: 1,600 mm, spindle speed (max.): 8,000 rpm, number of slots in tool magazine: 24, CNC machining center Brand: Travis Model: M-1500 SL Year: 2014 CNC control: Fagor 8055 M Fgsdpey Aww Sjfx Apwjb Travel (X, Y, Z): 1500x610x610 mm Worktable: 1600x610 mm Spindle speed: 8,000 rpm Taper: ISO 40 Guideways: Linear roller guides Tool changer: 24 positions Machine from IAIN Mecanizados workshop in Hospitalet de Llobregat. Schedule a visit to view the machine on site.

Condition: used, Year of construction: 2018, x-travel 1300 mm y-travel 670 mm z-travel 625 mm Fgodpfx Asy Aphcjpweb control Siemens Sinumerik 828D weight of the machine ca. 8500 kg