Used Other metal processing machinery for sale (545)

Condition: reconditioned (used), Year of construction: 2008, Functionality: fully functional, machine/vehicle number: 95461, total width: 4,200 mm, total length: 2,200 mm, total height: 3,400 mm, pressure: 4.1 bar, operating pressure: 3,800 bar, type of input current: three-phase, overall weight: 6,000 kg, year of last overhaul: 2024, Offered for sale by the official UK Water Jet Sweden authorised service centre is this Premium model NC4020ED complete with KMT intensifier pump. The machine has been serviced by ourselves using exclusively OEM parts and consumables and its dynamic accuracy remains with in the specification of the machine as new. The machine is offered with delivery, installation, training and warranty within the UK. Available under power for any test or trial. Sl9E8Dj7K The Fanuc controller drives the system, which as linear measuring scale along the X axis, and magnetic linear motors. This allows the heads to automatically reposition themselves during the cutting cycle to allow production of different sized parts on the same nesting. The YouTube link shows this technology in operation.

Condition: good (used), Year of construction: 2017, V304 plate processing machine (including 1 gantry beam(s) of 6.500mm and side trucks) ◼ This V304 plate processing machine is capable of processing plates up to 3.050mm x 18.000mm for T8Hrrvija bevel plasma cutting and marking (needle marker, if attached) and 4.100 x 18.000 mm for oxy-fuel cutting and marking (needle marker, if attached) ◼ X-rail (21.000mm on both sides of the machine, including double linear guides, helical rack and pinion system and rubber covering band) ◼ Plasma cutting and extraction table (4.300mm x 18.720mm, 2 channel(s), 1 pcs, suitable for ≥ 350A cutting) ◼ Position 1: Plasma cutting unit Kjellberg SmartFocus400 (1 pcs, automatic gas console, complete with cutting parameter database) ◼ Plasma 3D bevel unit (1 pcs, including 5 NC-axis, Voortman height control, intelligent torch positioning system and 3D collision sensor, for x- ,y- , k- and v-weld preparations) ◼ Driven suspension (1 pcs, servo motor driven, including laser pointer) ◼ Dross inhibitor (1 pcs, including 1,2L reservoir) ◼ Arc Glare protection (1 pcs) ◼ Position 2: Plasma cutting unit Kjellberg SmartFocus400 (1 pcs, automatic gas console, complete with cutting parameter database) ◼ Plasma 3D bevel unit (1 pcs, including 5 NC-axis, Voortman height control, intelligent torch positioning system and 3D collision sensor, for x- ,y- , k- and v-weld preparations) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Dross inhibitor (1 pcs, including 1,2L reservoir) ◼ Arc Glare protection (1 pcs) ◼ Position 3: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Position 4: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Position 5: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Cables high instead of low ◼ Donaldson fume extraction unit DFO 4-48 - 200L (incl. frequency controller) ◼ Air conditioning for switch panel (up to an ambient air temperature of 55°C) ◼ Hardware and software (includes VACAM ‘Machine Edition’, VACAM ‘Office Edition’, VACAD editor software module, VANEST nesting software, Layout marking software module, online support) ◼ Post processor for SigmaNEST (SigmaNEST is provided by the customer) ◼ Safety devices (safety bumpers, emergency stop cord)

Condition: refurbished (used), Functionality: fully functional, Shearing capacity 25mm, width 2,000mm. 4 x 90kw motors. Charging box 6,400 x 2,100 x 1,600mm Opening 5,000 x 2,050mm Dqxchd Bale size 750mm wide x 600mm high Bale weight 670kg maximum for 52 bales per hour.

Condition: new, Forklift tipping container, tipping container, tipping trough, forklift trough, waste tipping container, scrap tipping container -Condition: New -Contents: 0.8 m³ -Steel sheet: 3 mm -Mounting: for forklift tines -Max. tine width: 150 mm -with tilting mechanism Hhrsenvam -Storage: stackable -Corrosion protection: powder coated -Dimensions: 1750/750/H870 mm -Quantity: 17 pieces available -Price per piece -Own weight: 180 kg

Condition: refurbished (used), Year of construction: 2010, operating hours: 13,000 h, Functionality: fully functional, machine/vehicle number: 0781001071006, laser power: 3,000 W, warranty duration: 1 months, power: 3 kW (4.08 HP), space requirement width: 6,000 mm, space requirement length: 19,000 mm, year of last overhaul: 2024, pipe diameter: 200 mm, Equipment: cooling unit, documentation/manual, Adige LT8 from 2010 with a 3kW Rofin laser source. 3D Cutting head Input tube length 8500 mm. Output tube length 6500 mm. Max. tube diameter 200 mm Bk027Baaqec Max. loading weight 4000 kg

Condition: ready for operation (used), 3-roller bender Cccmfws Brand RAGACHE Type New Tube CP70 3 drive rollers diameter 232 mm Rectangle capacity Standard steel 60.0 mm Round capacity Standard steel 40.0 mm Capacity L Standard steel 70.0 mm Capacity U Standard steel 120.0 mm Capacity T Standard steel 60.0 mm Capacity I Standard steel 120.0 mm

Year of construction: 2000, Condition: used, Punching machine Noble HM 35/350 BKE 200/5 Maximum pressure 35 T Daoc8Qt 5 mm sheet thickness at 40 kp/mm²

Condition: good (used), Year of construction: 2012, ■ BCS Thermo 2000 Plate cutting machine (operating range 2.000 x 6.000 mm) Dqxynn ■ Gantry beam (length 3.500mm) ■ Machine track (8m on both sides of the machine) ■ Plasma cutting and extraction table (2.000 x 6.000 mm, 1 pcs) ■ Plasma cutting unit Hypertherm HPR260XD (1 pcs) o IHT M4000 PCS automatic height control o Driven suspension (motor driven, including laser pointer) ■ Oxy-fuel cutting unit (1 pcs) o IHT M4000 CAP automatic height control o Driven suspension (motor driven) ■ Fume extraction unit Filtercube 4H ■ Hardware and software (including VACAM ‘Machine Edition’) ■ Safety devices (emergency stop cord) Plasma cutting unit HPR260XD Material Mild steel Max. thickness 64 mm Max. pierce capacity 38 mm Dross-free cutting max. 32 mm Marking Yes, with same consumables Plasma gas mild steel Cutting O2 (99,9% pure clean, dry, oil-free) Marking Argon gas Shield gas mild steel O2 / Air (99,9% pure clean, dry, oil-free) Automatic gas console Yes Cutting speed 6 mm Approx. 4.035 mm / min 130A 12 mm Approx. 3.060 mm / min 200A 25 mm Approx. 1.660 mm / min 260A 38 mm Approx. 890 mm / min 260A 50 mm Approx. 590 mm / min 260A 64 mm Approx. 195 mm / min 260A * Grounding max. 6 m of machine: AC power, PE and service grounds must be connected to all equipment according to local and national codes. Oxy-fuel cutting unit Type GCE Fit+ Ignition Automatically Max. thickness 200 mm Gas Propane Optional gas Acetylene Cutting gas O2

Year of construction: 2020, Condition: new, Brand new 60ton hydraulic universal iron worker for sale Model NO. Q35Y-18 Condition New Oib3N Punching Pressure 60ton Max. Cutting Thickness16mm Angle of Shear 7 Trip Size 16X250 8X400 Slider Trip 9-25mm Sunny – American made hydraulic pump Siemens motor Schneider electrics Specification 1640x730x1770 Product Description Q35Y Hydraulic iron worker shearing and punching machine Production description: 1. Steel structure processing. 2. Elevator car and parts processing. 3. Trailer – spare tyre, trailer hinge, hook, Zhuang, tile board. 4. Construction machinery industry – belt machine, mixing station on the processing. 5. Agriculture and animal husbandry machinery industry – threshing rack body, trailer body parts processing. 6. Food industry machinery – slaughtering equipment rack and parts processing. 7. High – voltage tower components processing. 8. Wind power equipment – wind power tower stairs and pedal parts processing. 9. Machining – Building embedding parts / conveyor supports and other parts processing. 10. Grain Machinery – Cereals and Oils Equipment Starch equipment bracket, shell, small pieces of processing. 11. Railway wagon / car, crane parts processing. 12. Channel, square steel, bar, H steel, I-beam and other steel cutting, punching, bending. New 90ton Iron worker also in stock. Used Geka, Piranha, Peddinghaus and Kingsland iron workers for sale.

Condition: good (used), Pressing pliers, pressing machine, pressing jaws, pressing tool -Manufacturer: Roller, press machine type 5788001 with accessories -Pressing pliers: size M15, M18, M22, M28 -Accessories: see photos Oqugwj7Q8 -Dimensions case: 510/300/H120 mm -Weight: 11.7 kg

Condition: refurbished (used), Year of construction: 2008, operating hours: 13,000 h, Functionality: fully functional, machine/vehicle number: 0750801100102, laser power: 2,500 W, warranty duration: 1 months, power: 2.5 kW (3.40 HP), space requirement width: 6,000 mm, space requirement length: 16,000 mm, year of last overhaul: 2024, pipe diameter: 170 mm, Equipment: cooling unit, documentation/manual, Adige LT712 from 2008 with a 2.5kW Rofin laser source. Bqxdj9Ul Input tube length 6500 mm. Output tube length 6000 mm. Max. tube diameter 170mm Max. load weight 4000kg

Condition: used, Gas Fired Furnaces 3080 long x 2100 wide x 2080 height These are Internal - bed sizes Gas-fired Eurotherm Control 4102. Gp2Ezxn2Y Will heat up steel to 1000 degrees C plus. Both are installed and in working order. Spares available including a controller and thermocouples.

Year of construction: 2018, Condition: ready for operation (used), General Data Machine weight 280 kg Media Chip conveyor Yes Dqxkzp Additional Equipment Intravis Z cooling conveyor 450: For uniform cooling and increased dimensional stability Designation: Sorting conveyor with single-lane discharge, including upstream hopper with max. 400 litre volume IntraWatcher basic system: Image processing computer, software and tracking system Vacuum conveyor belt: High-speed conveyor belt including separator and side channel blower for vacuum generation Cross conveyor belt This INTRAVIS Capwatcher 6432 Inspection System was manufactured in the year 2018. Application Types Other Machine Tools

Condition: good (used), Year of construction: 2016, Transfer roller conveyor (length 6m, width 2.500mm, roll diameter 159mm, roll distance 800mm, line load 750kg/m, spread load 1.500kg/m) T72Od3Xu8 ◼ Infeed roller conveyor (length 6m, width 2.050mm, roll diameter 159mm, roll distance 800mm, capacity 1.250kg/m) ◼ Hydraulic pushers for 6m infeed roller conveyor (3 pcs, integrated in the infeed roller conveyor) ◼ V320-2000 plate processing system (base frame with vertical drilling unit, automatic tool changer, swarf brush, oxy-fuel cutting unit, automatic discharge table and product conveyor belt) ◼ Feeder trucks (servo driven, master truck with 3 hydraulic clamps, support truck with 2 hydraulic clamps) ◼ Lifting device for feeder truck (including motor drive for infeed conveyor) ◼ Plasma cutting unit HPR260XD (including automatic height control system IHT M4000 PCS) ◼ Fume extraction unit Donaldson DFPRO6 ◼ Layout marking tool (1 pcs) ◼ Air conditioning for switch panel (up to an ambient air temperature of 55°C) ◼ Outfeed roller conveyor (length 3m, width 2.050mm, roll diameter 159mm, roll distance 300mm, capacity 1.250kg/m) ◼ Hardware and software (includes VACAM ‘Machine Edition’, VACAM ‘Office Edition’, VACAD editor software module, VANEST nesting software, Layout marking software module, online support)

Condition: used, 4-axis industrial robot, handling robot, Scara robot, handling robot, loading robot, assembly robot STÄUBLI type TS80 + CS8C bmn Year of manufacture 10/2011 Factory no. F11/5JN5A1/A/01 Year of manufacture 2011 Number of axes 4 Handling weight (nominal load) 2 kg Handling weight (maximum load) 8 kg Arm reach 800 mm Repeatability (X+Y) 0.01 mm Repeatability (Z) 0.004 mm Repeatability (R) 0.002° Working range axis 1 +-280° Working range axis 2 +-310° Working stroke axis 3 (Z-axis) 200 mm Rotation range axis 4 (R-axis) +-500° Nominal speed / maximum speed: Axis 1 350 / 490 °/s Axis 2 500 / 620 °/s Axis 3 1600 / 2220 mm/s Axis 4 1200 / 1929 °/s Axes 1 + 2 8.11 / 10.84 m/s Robot version floor mounting Control STÄUBLI CS8C bmn Factory no. F11/5JN5A1/C/01 Rated voltage 1 x 230 VAC Orvxssx3G Rated frequency 50 - 60 Hz Connected load 1700 VA Control dimensions (W x H x D) 450 x 310 x 450 mm - Control adjacent with removable "teach in" operation - Material gripper, workpiece gripper HELLA / MADER Total weight 190 kg Transport space requirement L x W x H 900 x 700 x 1500 mm very good condition

Condition: good (used), Pressing pliers, pressing machine, pressing jaws, pressing tools, pressing rings Oqrnjjgaa -Manufacturer: Roller, pressing pliers pressing jaws pressing rings set -Sizes: M15, M22, M28, Z1 -Individual components: see photos -Dimensions case: 410/220/H65 mm -Weight: 4.7 kg

Year of construction: 2007, Condition: good (used), machine/vehicle number: 153, AB: 105 cm Tjy0Qtt7K

Condition: used, Large Gas-Fired Furnaces for Sale: 7500 long x 2780 wide x 2000 height. Gojzi9Y2G These are Internal - bed sizes Gas fired Eurotherm Control 4102. Will heat up steel to 1000 degrees C plus. Both installed and working order. Spares available including a controller and thermocouples.

Condition: like new (used), Year of construction: 2012, Type : 01602 Dnxtpr No. : 04837 Year of construction : 2012 Technical data: - Insertion height : 250 mm - Insertion width : 500 mm - Total length : 2.230 mm - Weight : 400 kg Condition: as good as new, unused

Condition: good (used), Year of construction: 2007, DRILLING MACHINE Operating range V630/1000M Min. / max. height 10 – 450 mm Min. / max. width 60 – 1.050 mm Max. positioning weight 9.000 kg Number of drilling units 3x Automatic tool changer 3x (3x 5 positions) Height measuring Included Width measuring Included Machine weight 12.000 kg Roller feed measuring system Max. speed 42 m/min Min. infeed length 1.500 mm Drilling unit VD40 Feed and positioning servo-motors with servo-invertors Spindle rpm Stepless 100 – 2.500 rpm (servo-motors) Lubrication Internal by mist of air / oil Holder SK 40 Drill diameter oil-tube-drills 8 – 40 mm Drill diameter carbide drills 13 – 32 mm Thread tapping M8 – M24 Centre point marking possibility Yes, 3 sides SAWING MACHINE Sawing machine VB1050 Capacity (h x w) 0° 500 x 1.130 mm Capacity (h x w) +/- 15° 500 x 1.060 mm Capacity (h x w) +/- 30° 500 x 925 mm Capacity (h x w) +/- 45° 500 x 725 mm Capacity (h x w) +/- 60° 500 x 470 mm Saw band speed stepless 40 – 120 m / min Saw drive motor 7,5 kW Saw band dimensions 9.550 x 54 x 1,6 mm Hydraulic band tension 48.000 N T70Qkhfeu Machine weight +/- 8.500 kg

Condition: good (used), Year of construction: 2012, Vernet Behringer HD-X 918 / HBP 410/923 CNC Sawing / Drilling Line – Year 2012. 3 Spindle. Automatic tool changer. 24 metres infeed. 18 metres outfeed. T3Cufyor3 Gripper Feed measuring system. Infeed and outfeed Cross Transfers.

Condition: excellent (used), Year of construction: 2021, ■ V200 Plate drilling system (heavy steel C-frame with vertical VD40 drilling unit and drilling table with low friction rollers) ■ VTC8/40 automatic tool changer (8 tool positions) ■ VDB2 deburring unit (for automatically deburring of drilled holes) ■ VN1/16 hydraulic numbering unit (16 characters, 10 mm x 1 mm) ■ Hardware and software (includes VACAM ‘Machine Edition’, VACAM ‘Office Edition’) ■ Safety devices (safety fencing, interlocking door for safety fencing) ■ Year of construction 2021 Operating range V200 Max. length 1.400 mm * Max. width 1.000 mm Min. / max. thickness 3 – 60 mm Capacity 600 kg * Longer lengths (max. 2.400 mm) possible by automatic repositioning. X-Y table Dimensions 1.400 x 1.000 mm Dqxqnp Clamping Hydraulic by 2 move able clamps Table provided with low friction rollers Drilling unit VD40 Automatic tool changer VTC 8/40 (8 positions) Feed and positioning Servo-motors, servo-inverters Spindle rpm Stepless 100 – 2.500 rpm (servo-motors) Nominal power 30 kW Lubrication Internal by mist of air / oil Holder SK 40 Drill diameter 5 – 40 mm Thread tapping M6 – M30 Centre point marking Yes Countersinking Yes Hydraulic clamping Yes Min. tool length 125 mm Max. tool length 385 mm Numbering unit VN1/16 Number of code discs 1 pcs Number of characters 16 pcs Character height x imprint 10 x 1 mm General information Voltage Stabilizer Not included Current Transformer Not included Ambient temperature 0 - 35°C max. 95% relative humidity Working height 760 mm (+/- 25 mm) Colour Plates RAL 3003 Red Frames RAL 7011 Grey

Condition: excellent (used), Year of construction: 2012, DRILLING MACHINE: Power consumption, kW 9 Maximum thickness of the processed wall 40 mm Minimum thickness of the processed wall 6 mm Diameter of holes 6 - 40 mm Tool rotation speed 0 – 2100 rpm Tool change automatic Feed gripper movement speed 1 – 720 mm/min Jf2Gvlwhg Horizontal clamping force 1 x 2.5 tons Vertical clamping force 4 x 1.5 tons Dimensions of workpieces to be processed: Maximum 1200 x 600 mm Minimum 80 x 6 mm SAWING MACHINE CPI 105DI

Condition: good (used), Year of construction: 1999, CNC PUNCH / DRILL / SHEARING LINE for angle and plates. TECHNICAL DATA. PUNCH INSTALLATION. MATERIAL SPECIFICATION material sample steel 52 plate size (MM) X (MM) max 300 x 25 material sample steel 37 plate dimension (MM) X (MM) min 60 x 6 max 400 x 20 angle line dimension min 50 x 50 x 5 max 150 x 150 x 5 Punch information TYPE P2- XXX-XX number 2 TYPE P3-XXX-XX number 3 TYPE P5-XXX-XX number 5 punching capacity tonnage 110 punching diameter (mm) x thickness (mm) max 32 x 20 Shear UNIT Shear tonnage 180 Capacity max 400 x 20 Stamping UNIT Total number of characters number 40 Maximum number of characters per operation 12 CONNECTION VALUES Voltage 3 phase + Neutral + Earth V 3 X 400 Fuse A 63 slow Power KW 25 Frequency HZ 50 Permitted m-axis tolerance mains voltage % +/- 10 Field rotation Right Air pressure bar 6-8 Air capacity m2 / hour 250 Dqueof

Condition: good (used), Year of construction: 2003, Minimum capacity 35mm x 35mm x 3mm Maximum capacity 150mm x 150mm x 15mm Maximum punch diameter 30mm Minimum punch diameter 6mm Jedkq39Uo 36 character punching / marking unit. 12 metres length capacity.