Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 55DM2752, workpiece weight (max.): 1,500 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, wire diameter (max.): 0.3 mm, TECHNICAL DETAILS Travel range X-axis: 600 mm Travel range Y-axis: 400 mm Travel range Z-axis: 310 mm Travel range U-axis: ±75 mm Travel range V-axis: ±75 mm Wire diameter: 0.1 - 0.3 mm Max. workpiece dimensions: 1,050 x 820 x 305 mm Max. workpiece weight: 1,500 kg Table dimensions: 840 x 560 mm Table design: U-shaped Taper angle: max. 15° Taper angle at workpiece height: max. 260 mm MACHINE DETAILS Dielectric tank Tank capacity: 860 l Filtered particle size: 3 µm Water purifier: 10 l Hsdpey I Uvcsfx Apnofg Dry weight: 350 kg General power supply: 13.5 kVA Air pressure: 0.5 - 0.7 MPa Air consumption: 75 l/min or more Dimensions & Weight Dimensions (W x H): 2,022 x 2,150 mm Weight: 3,500 kg

Condition: ready for operation (used), Year of construction: 2006, operating hours: 32,000 h, functionality: fully functional, workpiece weight (max.): 1,000 kg, travel distance X-axis: 550 mm, travel distance Y-axis: 370 mm, travel distance Z-axis: 410 mm, controller model: Fanuc Alpha 180is-WB, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates the buyer to collect the item within the specified deadline, by 08.06.26! TECHNICAL DETAILS Hfjdpfjy Nmxxsx Apneg Workpiece weight: 1,000 kg Travel distance X-axis: 550 mm Travel distance Y-axis: 370 mm Travel distance U-axis: 410 mm Travel distance V-axis: 120 mm Travel distance Z-axis: 120 mm Maximum cutting angle: 30° Number of axes: 5 Rapid traverse X-axis: 900 mm/min Rapid traverse Y-axis: 900 mm/min Rapid traverse U-axis: 450 mm/min Rapid traverse V-axis: 450 mm/min Rapid traverse Z-axis: 900 mm/min MACHINE DETAILS Control system: Fanuc Alpha 180is-WB Operating hours: approx. 32,000 h Machine weight: 3,100 kg EQUIPMENT Automatic wire threading Note: Sale does not include the monitor above the control unit.

Condition: used, Year of construction: 2002, Charmilles Robofil 440-CC Wire-Cut Electro-Discharge Machine. Serial No. 931081 (2002). Country of Origin: Switzerland Please Note: this lot has been professionally decommissioned and secured for transit Hodpfx Asy R Adyjpnjfg Location: This lot is located in Birmingham, UK. A charge of £550 for decommissioning and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Condition: used, Year of construction: 2002, Charmilles Robofil 4030 SI-TW Wire-Cut Electro-Discharge Machine. Serial No. 174621 (2002).Country of Origin: Switzerland Hedpfx Apjy Rz Nzsnefg Please Note: this lot has been professionally decommissioned and secured for transit Location: This lot is located in Birmingham, UK. A charge of £550 for decommissioning and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Condition: used, Year of construction: 2008, Charmilles FO 350 S Die-Sink Electro-Discharge Machine. Serial No. 642977 (2008). Country of Origin: Switzerland Hfedpfxey Rz Nbs Apnsg Please Note: this lot has been professionally decommissioned and secured for transit Location: This lot is located in Birmingham, UK. A charge of £550 for decomissioning and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Condition: used, Year of construction: 2010, Agie Charmilles FI 640 CC Wire-Cut Electro-Discharge Machine. Serial No. 113 (2010) Please Note: this lot has been professionally decommissioned and secured for transit Location: This lot is located in Birmingham, UK. A charge of £550 for decommissioning and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. Hfjdpjy Rz Iwjfx Apnsg

Condition: used, Year of construction: 2008, GF Agie Charmilles AC Progress V4 CNC Wire Eroder with GF Agie Charmilles CNC Control & Pendant, 1200 x 800 Bed. Serial No. 72 (2008) Weight 6870kg. Country of Origin: Switzerland Location: This lot is located in Birmingham, UK. A charge of £550 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. Hfjdpfey Idcxsx Apnog

Condition: used, Year of construction: 2007, Travel distance: X 500 mm Y 350 mm Z 300 mm Water bath machine Automatic wire threader Hfedpfouu Dl Rox Apnsg

Condition: ready for operation (used), Year of construction: 2007, This Sodick AQ537L was manufactured in 2007. It operates optimally between 20°C and 25°C ambient temperatures, with a full load current of 43 A and a rated capacity of 15 kVA. It requires a supply voltage of 200 V and is designed for three-phase power. Contact us for more information about this machine. • Relative humidity: 40%–50% • Operating temperature: 10°C–35°C • Recommended ambient temperature: 20°C–25°C • Full load current: 43 A • Rated capacity: 15 kVA • Frequency: 50/60 Hz • Phase: 3 P • Supply voltage: 200 V Hfedpfx Aex D Iplspnog

Condition: ready for operation (used), Year of construction: 2013, travel distance X-axis: 400 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 300 mm, number of axes: 4, This 4-axis PENTA 433GS CNC was manufactured in 2013. It features a working area of 1000 × 550 × 320 mm and a maximum workpiece weight of 700 kg. The machine is equipped with an automatic electrode changer and a controlled rotary axis (C-axis). If you are looking to get high-quality die-sinking capabilities, consider the PENTA 433GS CNC die-sinking EDM machine we have for sale. Contact us for further details. • Working area X×Y×Z: 1000 × 550 × 320 • Clamping table: 700 × 350 • Distance table–quill (min–max): 130–430 mm • Max. workpiece weight: 700 kg Additional equipment Hodpsyxc Insfx Apnjfg • Automatic electrode changer • Controlled rotary axis (C-axis)

Condition: ready for operation (used), Year of construction: 2023, travel distance X-axis: 300 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, total height: 2,140 mm, total width: 1,530 mm, product length (max.): 2,070 mm, number of axes: 4, This 4-axis Mitsubishi SG8S was manufactured in 2023. It features a travel range of 300 mm in the X-axis, 250 mm in the Y-axis, and 250 mm in the Z-axis. The machine includes a worktable size of 500 x 350 mm and can accommodate a maximum workpiece weight of 550 kg. If you are looking to get high-quality die-sinking capabilities, consider the Mitsubishi SG8S machine we have for sale. Contact us for further details. • Worktable size: 500 x 350 mm • Distance table/quill: 150 / 400 mm • Max. electrode weight: 25 / 150 kg • Max. workpiece weight: 550 kg • Filling height of work tank: 250 mm • Generator current: 60 A • Power connection: 400 V • Mains frequency: 50 Hz • Power consumption: 8 kVA Hfodpfoy Sgwgsx Apnsg Additional equipment • EROWA 20-position tool changer (ATC) • C-axis with EROWA

Condition: good (used), Year of construction: 2006, MACHINE Wire EDM Machine Manufacturer: Mitsubishi Machine Model: FA 20 Control: Year of Manufacture: 2006 TECHNICAL DATA Hjdpfoy Snbmsx Apnofg Travel distances - X-axis: (mm) 500 - Y-axis: (mm) 350 - Z-axis: (mm) 300 Machine Table - Table size, fixed table L x W: (mm) 780 x 630 - Max. table load: (kg) 1,500 - Workpiece dimensions: (mm) 1,050 x 800 x 295

Condition: ready for operation (used), Year of construction: 1998, travel distance X-axis: 300 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, total height: 2,290 mm, overall weight: 3,200 kg, controller manufacturer: MAKINO, controller model: MGF, number of axes: 3, This 3-axis Makino EDNC 30 die-sinking EDM machine was manufactured in 1998. It features travel paths of 300mm in X, 250mm in Y, and 250mm in Z, a table size of 500 × 350 mm, and can handle a maximum workpiece weight of 500 kg. Consider the opportunity to buy this Makino EDNC 30 die-sinking EDM machine. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Total area: width 3000 mm, y 2800 mm • Power: 12 kva, 400 v, 12 a • Table size: 500 mm x 350 mm • Tool positions: 8 • Polishing edm is possible with this machine. Extra Information Polishing EDM is possible with this machineFaulty circuit board (machine won't start up) Dimensions Machine Depth 2000 mm Hfjdpfxsx U U Huj Apnjg

Condition: ready for operation (used), Year of construction: 2017, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, total height: 2,150 mm, total width: 1,050 mm, wire diameter (max.): 0.3 mm, overall weight: 3,500 kg, controller manufacturer: MITSUBISHI, controller model: D‑CUBES / M800 series, product length (max.): 3,030 mm, number of axes: 5, wire diameter (min.): 0.1 mm, This 5-axis Mitsubishi MV2400R wire-cut EDM machine was manufactured in 2017. It features an X-axis travel of 600 mm, Y-axis travel of 400 mm, and Z-axis travel of 310 mm, accommodating workpieces up to 1050 × 820 × 305 mm and weighing up to 1500 kg. If you are looking to get high-quality wire-cutting capabilities, consider the Mitsubishi MV2400R machine we have for sale. Contact us for further details. Hfodey Rrcfepfx Apnjg • Axis travels: U ±75 mm, V ±75 mm • Max. workpiece dimensions (W × D × H): 1050 × 820 × 305 mm • Max. workpiece weight: 1500 kg • Table dimensions (W × D): 840 × 640 mm • Max. taper angle: 15° at 260 mm workpiece height • Wide‑angle taper (option): up to 45° at 60 mm (with special guides) • Positioning accuracy: ≤ ±2 μm over full stroke (MV‑R series spec) • Dielectric tank capacity: 860 L • CNC control: Mitsubishi D‑CUBES / M800 series; Industry 4.0 ready (networking and monitoring interface) • Machine condition: Excellent condition; very low hours • Industry 4.0: Prepared for connectivity

Year of construction: 1995, condition: good (used), ARD EDM diesinking machine offered. Hfjdpehktttjfx Apneg Type: M 50 F Control unit: ARD system Facile A X-travel: 310 mm Y-travel: 200 mm Z-travel: 200 mm Bed: 360 x 600 mm Power: 5,5 KVA Spindle type: System 3R Spindle stroke: 200 mm Year: 1995 Dimensions: 150x135x210 cm LxWxH For more information call us or send an e-mail.

Condition: good (used), ONA Poli Spark die-sinking EDM machine Hsdpfx Aeq Eh Skopnefg Type: IN 260 S2000-60A Bed: 410 x 645 mm Documentation included Machine dimensions: 160x130x215 cm LxWxH Cabinet dimensions: 130x95x210 cm LxWxH Cabinet dimensions: 60x70x170 cm LxWxH

Condition: excellent (used), Year of construction: 2001, Charmilles Roboform 2400 Year of manufacture: 2001 X-320 mm, Y-220 mm, Z-320 mm Max. workpiece dimensions: 880 mm x 550 mm x 225 mm Table: 560 mm x 320 mm Weight: 3,500 kg Hjdpfx Apjy Ncylsnofg Including EROWA tooling Excellent condition!

Year of construction: 2025, condition: used, Wire guide elements for metal, spacing 100-200 mm, 15 mm longer Using these wire guide elements reduces the diameter of the workpieces that can be machined. Suitable for Vollmer machine types: QWD 76 P / QWD 750 / QWD 760 / QWD 750 H / QWD 760 H / VPulse 500 Hjdpfxewl Agqj Apnsfg

Year of construction: 2025, condition: used, HSK63-B,F Test Mandrel Suitable for Vollmer machine types: QWD 750 / QWD 760 / QWD 750 H / QWD 760 H / VPulse 500 and all models from the QXD series (200/250/400) Hsdpjwl Alaofx Apnofg

Year of construction: 2025, condition: used, Adaptor for A-axis HSK63-B,F For manual and automatic loading. Suitable for Vollmer machine types: QWD 750 / QWD 760 / QWD 750 H / QWD 760 H / VPulse 500 and all models from the QXD series (200/250/400) Hfjdpfx Ajwl Aixepnsg

Condition: used, Year of construction: 2007, Suitable for the automatic processing of PCD-tipped milling cutters, shank tools, disc-shaped tools such as Saws, milling cutters etc. using the wire-electro-erosion method. Accessories: Total enclosure, Hedpfx Apowtmg Dsnofg Cooling unit for dielectric, automatic fire extinguishing system, Mist extractor N181 Probe, Machine lamp, automatic central lubrication, Workpiece carrier ISO50, Measuring mandrel, Cutter outside diameter: Max. 250 mm Cutting length: max. 260 mm Shank tool diameter: 10 - 250 mm Outside diameter disc-shaped tools: Max. 250 mm Tool weight max.: 20 kg X axis travel: 275 mm Y-axis travel: 300 mm W-axis travel: 200 mm A-axis mounting cone: ISWO 50 E-axis swivel range: 180 ° Required space for the machine: 2535 x 2200 x 2220 mm Weight approx.: 4500 kg Connected load: 4.5 kW (400 V / 50 Hz) colour: gray RAL 7045/7047

Year of construction: 2005, condition: used, CNC-controlled erosion machine for the processing (erosion, grinding, polishing) of PCD tipped tools up to 400 mm diameter and 400 mm length, according to disc-electrical-erosion processes for use in service and in production. Accessories: Total enclosure Software path management Software P- System for peeling cutters, Software shaft endmills (207/208) Software discoid tools face (221/222/223/224) Software profiled workpieces (233/234/239/240) Software hoggers, profiled hoggers (255/256/257/258/260/261/262/263) Software discoid tools (264/265) Software shaft and jointing cutters (267/268/277/278) Software step tools (271) Software scoring saws (299) Software saws flat tooth (301) Software saws single sided with chamfer (302/303) Software saws alternate tooth (304) Software saws triple chip (309) Software saws flat top tooth (310) Software saws flat trapezoid tooth (311) Software saws alternate tooth with chamfer (312) Software shaft and jointing cutters (7/8) Software shaft and jointing cutters profiled (33/34) Software hoggers, profiled hoggers (53/54/55/56/57/58) Software discoid tools (64/65) Software shaft and jointing cutters (67/68/77/78) Software compensation (90) Software saws flat tooth (101) Software saws single sided with chamfer (102/103) Software saws alternate tooth (104) Software saws triple chip tooth (109) Software saws flat top tooth (110) Software saws triple chip tooth (111) Software saws alternate tooth with chamfer (112) Software for polishing of profiled hoggers (757/758/760/761) Filter system with chiller for dielectric fluid Automatic fire extinguishing system DIN 14497 Standard programs for measuring, eroding etc. Program for chamfering of workpiece cutting edges, Automatic Diagnosis program for machine operational status with text output on screen Loader for workpieces, with CNC-controlled pivot for loading and unloading to a magazine, 6 sided erosion wheel changer, Workhead SK 50 with adapter to 12 HSK 63 A, Turntable workpiece magazine for 12 workpieces SK 50, Turntable workpiece magazine for 4 workpieces SK 50, 6 flush sets QXD250 CAD/CAM for external PC workstation including ARES drawing program, Industrial PC external PC workstation with desktop PC, monitor, keyboard, and mouse, 1 HSK63 F adapter for measuring the machine. X axis travel: 730 mm B axis travel: +/- 30 ° Y-axis travel: 840 mm Z axis travel: 500 mm E-axis: 330° Hfedpfx Apow S I Dgjnsg A-axis: 360° Workpiece carrier: SK50 workpiece length max.: 400 mm Workpiece diameter max.: 400 mm workpiece weight max.: 15 kg Connected load approx.: 6.7 kW (400 V / 50 Hz Dimensions W x D x H approx.: 2160 x 3435 x 2190 mm Weight approx.: 7800 kg colour: RAL 7047 Telegray 4, color RAL 7045 Telegray 1

Condition: used, Year of construction: 2002, Suitable for the automatic processing of PCD-tipped milling cutters, shank tools, disc-shaped tools such as Saws, milling cutters etc. using the wire-electro-erosion method. Accessories: Total enclosure, Cooling unit for dielectric, automatic fire extinguishing system, Mist extractor Probe, Machine lamp, automatic central lubrication, Workpiece carrier ISO50, Measuring mandrel, Tailstock. Cutter outside diameter: Max. 250 mm Cutting length: max. 260 mm Shank tool diameter: 10 - 250 mm Outside diameter disc-shaped tools: Max. 250 mm Tool weight max.: 20 kg X axis travel: 275 mm Y-axis travel: 300 mm W-axis travel: 200 mm A-axis mounting cone: ISWO 50 E-axis swivel range: 180 ° Required space for the machine: 2535 x 2200 x 2220 mm Weight approx.: 4500 kg Connected load: 4.5 kW (400 V / 50 Hz) Hfodpfx Aeylby Iopnog colour: gray RAL 7045/7047

Condition: used, Year of construction: 2001, Suitable for automatic processing of PCD-tipped milling cutters, shank tools, disc-shaped tools such as Saws, milling cutters, etc. using the wire electro-erosion process. Accesories: Total enclosure, Mist extractor Probe, Machine lamp, Automatic central lubrication, Coolant system dielectric fluid Fire extinguishing system Measuring mandrel Alphanumeric keyboard cutter outer diameter max: 250 mm cutting length max.: 200 mm shank tool diameter: 10 - 250 mm cutting length: 200 mm Outside diameter of disc-shaped tools max.: 250 mm tool weight max.: 20 kg Hsdpfxsyzm Iwj Apnefg X-axis travel: 220 mm Y-axis travel: 300 mm W axis travel: 200 mm A-axis rotation range: 60 ° A-axis taper: ISO 40 E-axis swivel range: 120 ° number of revolutions: 80 - 2000 rpm. Dimensions L x W x H: 2235x2630x2130mm mass: approx. 4500 kg Connected load approx.: 400V / 50Hz / 4.5KW colour: turquoise RAL 5021/grey RAL 9002

Condition: used, Year of construction: 2008, Suitable for the automated machining of PCD-tipped milling cutters, end-cutting tools, and disc-shaped tools such as saws, milling cutters, etc., using wire EDM. Accessories: Total enclosure External PC with contour management and Exprog software Cooling unit for dielectric fluid Automatic fire extinguishing system Automatic central lubrication Extraction system, Measuring probe Machine lamp Workpiece carrier SK 40 Measuring mandrel SK 40 Hfsdpfoxy Rx Iex Apnjg cutter outer diameter: Max. 320 mm Shank tool diameter: 10-320 mm Outer diameter disc-shaped tools: Max. 320 mm Cutting length: max. 480 mm X-axis travel: 500 mm Tool weight: max. 20 kg Y axis travel: 300 mm Travel path W-axis: 200 mm Machine space requirements: 2535 x 2200 x 2280 mm A-axis rotation range: 360° E-axis swivel range: 180° Weight approx.: 4800 kg Connected load: 5,4 kW colour: grey RAL 7035/7043