Used insulating glass making machines for sale (123)

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, UV cure station 1800 x 1500 mm 3.2 Operation This machine is only intended for curing coating in windows on a trolley and sliding in/out of the cure chamber. The trolley can be slid in/out but is fixed to the machine. Curing the coating is done using UV light and temperature and for this, the door of the machine must be closed so that no UV light escapes. Furthermore, this machine is meant for flash testing windows. This is done by putting a voltage on a window where the pixel in the window has to be activated. This machine is only intended for processing products and other materials described in these instructions for use. Global cycle: - Windows are placed on the glass trolley and windows on the trolley are electrically connected. - The operator presses the 2-hand control and checks whether all windows respond correctly. - After a successful flash test, the glass trolley is pushed into the furnace by the operator. - After inserting the glass trolley into the furnace, the door is automatically closed and the UV process chamber can be started. - The HMI indicates when the process is complete. Bdedpfx Ajwamq Neacoi - The glass trolley can be pulled out after completion of the process. The trolley can be moved in/out but is fixed to the machine. The furnace can be heated up to 50°C. There is a danger of limb burns in this process. Wear heat-resistant safety gloves. What Is a UV Curing Oven? UV curing is a photochemical process that applies a cure of adhesives and coatings using the power of UV light. Originally invented to provide an alternative to solvent-based finishes, UV light sets instantly with far greater tensile strength than conventional methods. The reason it’s more effective is that a UV oven doesn’t heat or dry the finish but uses the lamps inside the oven to produce a certain frequency and distribution of light that hardens the cure. This high-speed solvent-free process is an excellent tool for streamlining automation in the production of a wide variety of products, including electronics, graphic arts, medical devices, automotive parts, metal, glass, plastic and more.

Condition: ready for operation (used), Year of construction: 1999, total length: 1,400 mm, total width: 1,250 mm, total height: 2,600 mm, input voltage: 400 V, overall weight: 600 kg, 2-component mixing and dispensing system for silicone 1x200L 1x20L Boom 3500 mm The system has not been operated for 3 years, service is required The system is complete and ready for operation Bodpjwayn Iofx Aacedi

Condition: good (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 520-029452, input voltage: 400 V, overall weight: 1,600 kg, type of input current: three-phase, power: 1.81 kW (2.46 HP), LISEC BSV-30/K professional automatic bending machine designed for processing aluminum and plastic spacer bars used inside insulated glass units. - Used in the glass industry - Precise bending of spacer bars for insulating glass production - High-reliability industrial machine Technical specifications: Model: BSV-30/K Year of production: 2006 Power: 1.81 kVA Voltage: 400V / 50 Hz Control voltage: 400V / 24V Consumption: 2.60 A Max current: 1.7 A Operating pressure: 6.00 bar Weight: 1600 kg Availability: The machine will be ready for pickup in October Bdedpfx Ajwtm Rveacsi Note: The machine includes a spacer bar storage unit and spare parts, all included in the price. On-site inspection available by prior arrangement.

Condition: excellent (used), Year of construction: 1996, functionality: fully functional, input voltage: 400 V, overall weight: 4,400 kg, type of input current: AC, space requirement width: 2,300 mm, space requirement length: 9,000 mm, space requirement height: 3,800 mm, Lisec Sealing robot VFL-1/25, year 1996, for maximal unit sizes of 3500 x 2500 mm, partly refurbished in 2023, consisting of following components: - RTVN-11/25VFE, inlet conveyour sealing robot - VFL-1/25, sealing robot including options for shape sealing according to Lisec shape catalogue and sealing of triple units in two cycles - DOS-1PSD, mixing and metering station for Polysulfide Bjdpfx Aasrg Eypecsdi The machine is in good working order. All material and hydraulic hoses as well as check valves have been replaced, pumps and metering device fully refurbished The machine can be seen in our warehouse in Hofkirchen/Austria on appointment and is available from our stock.

Condition: reconditioned (used), Year of construction: 2010, functionality: fully functional, CE Glass 2100mm vertical glass washing and drying machine. The machine is in a well-maintained and inspected condition, ready for immediate use. New water suction rubber, new bearings. Working direction: from right to left Max glass height: 2100mm Number of brushes: 4 (also for Low-e glass) Bdodsxb N Rfepfx Aacoi Drying fan Stainless steel cabinet Water heating Background lighting Stop sensor The machine is fully inspected, cleaned and in perfect working order and can be viewed on our premises!

Condition: used, • With digital display for length adjustment via handwheel. • Long support table on the left and right • Storage shelf behind • Extractor • Spare saw blades Bdjdswcm Nqspfx Aacji • Price upon request

Condition: used, Year of construction: 1993, functionality: fully functional, S-IGL-2295 Make Reinhardt technique Type: RT MAXI HYDRAULIC Bdjdpjv Ib A Rsfx Aacsi

Condition: ready for operation (used), Year of construction: 1995, Automatic filling system for spacers Bsdpfsxbfugox Aacsdi Condition is good! Available for immediate pickup

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Hot Press Machine • Using Purpose: Pressing Double Glass • Usable Glass Measures (max.) : a. Length : 2.000 mm., b. Width : 1.800 mm., • Voltage : 380 V., Bsdpjwdn S Ajfx Aacedi • Power : 31 (Kw), • Weight : 1360 kg (netto), • Dimensions(WxLxH): 2.080 mm. x 2.150 mm. x 1.600 mm.,

Condition: excellent (used), Year of construction: 2011, Lisec glass washer RL-20VN, left to right, consisting of: RTVB-38/20WE, washing machine inlet conveyor 3800 mm RTL-20VN, washing machine with 6 brushes for low-e, including a full demineralization plant as seen on the photos RTVB-32/20ST, washing machine outlet conveyor 3200 mm Bsdpfx Aotpux Ssacjdi The machine can still be seen in operation and will be available from end of May

Condition: new, Year of construction: 2020, functionality: fully functional, BCM 1600mm vertical glass washing and drying machine. Bjdpfsuy S Daox Aacsdi Working direction: from left to right Max glass height: 1600mm Number of brushes: 4 for Low-e glass too Drying fan Stainless steel cabinet Water heating Background lighting Stop sensor The machine is brand new and can be viewed in operation on our premises!

Condition: used, Year of construction: 2003, functionality: unexamined, Reinhardt Technik MAXI Pneumatic Bdjdpfx Aov Ibxrjacoi is the most powerful manual sealing system with pneumatic drive for polysulfide, silicone, polyurethane.

Condition: like new (used), Year of construction: 2023, machine/vehicle number: 224343, Flush pump for Lisec/Reinhardt/TSI GRACO MONARK – air powered pump 9.5 L/min 5:1 Bsdpfx Aaow Smpbecodi

Condition: good (used), Year of construction: 1995, functionality: fully functional, Part of Lisec insulating glass line for maximum glass size 3500 x 2500 mm, consisting of: RSV-38/25, frame set section Bsdsr Ncykspfx Aacodi PSL-35/25V, assembling section FPL-35/25, hydraulic flat press RTV-38/25, press outlet conveyor The line is in good working order and still can be seen in operation (DE) on appointment. It will be available in August 2024. In connection with any horizontal washing machine it will be a full IG line. A tilt table after the press outlet conveyor is available optionally.

Condition: used, Year of construction: 2008, functionality: fully functional, Stefiglass Sprint 1600 1600mm vertical glass washing and drying machine. Working direction: right to left Max washable glass height: 1600mm Bodpewk Up Uefx Aacjdi Number of brushes: 4 (not for Low-e glass!) Drying fan Stainless steel cabin Water heating Backlighting Stop sensor The machine is in used condition as shown in the pictures, it can be viewed at our location!

Condition: excellent (used), Year of construction: 2021, 1. Switch on the wall and the electronics. Do this by switching on the mean switch and the lightwall (on the back). So switch on the multimeters. See photos 1 and 2 2. Adjust the upper and lower beam to the right cell height. Do this with 2 people. See photo 3 3. Check if there is no power on the cables coming from the power beam. Use the multimeters for this. Bdodpsv Ep U Ajfx Aacei 4. Connect the cells with the cables. 5. Check the cells with the protocol “Q3 quality finished cell”. 6. Use the right voltages for the different products. 24V for ddLC and 46V for scatter. 7. When doing the capacity measurement, turn the black switching knob from “power” to “R/C”. When done turn it back to “power” 8. When you have ddLC cells use the lightwall and the rotatable polar. 9. If you have scatter cells remove the lightwall and use the spotlight. For swtiching on/of this spotlight you can use the remote control. See photo 4. 10. When you are done, please use the mainswitch to power down, and switch of the used lights.

Condition: like new (used), Year of construction: 1999, functionality: fully functional, total length: 110 mm, total width: 110 mm, total height: 900 mm, Lisec rotary table type: ER140 completely overhauled! Functional guarantee! Incl. attachment for small panes. Bdodpjw Smmajfx Aacoi

Condition: good (used), Year of construction: 2002, Automatic Lisec butyl application machine, left to right, year 2002, consisting of: Bdjdpfxetpgupo Aacoi FRS-25Z, overhead frame conveyor for supply RZVS-25/25, frame lift (down to butyl machine level), including frame measuring device LBH-25AR, automatic butyl application machine, 2x7,5 kg butyl cylinder capacity, suitable also for Georgian bars RAVS-25/25, frame lift (up to overhead frame conveyor) FRS-25A, overhead frame conveyor down to frame set section The machine is available from our stock in Austria and can be seen on our site on appointment.

Condition: good (used), Year of construction: 2012, Bystronic manual butyl extruder Bedpfsvzky Sox Aacjdi Type: BEZ Frame dimensions The following minimum and maximum dimensions for the frames to be processed must be observed: Minimum dimensions Maximum dimensions 70 mm 4,000 mm Leg length (HR = LR) 5.0 mm 12.0 mm Profile height (HP) 4.0 mm automatic up to 24 mm / manual up to 35 mm S-IGL-2296

Condition: not inspected (used), Year of construction: 1995, functionality: fully functional, Lisec sealing robot for second seal type VL-1/25-2, for maximum unit size 3500 x 2500 mm, running direction right to left, consisting of following: RTV-11/25VE, inlet conveyor with width measuring device for glass and frame thickness VL-1/25-2, sealing robot for double glazing units Bdedpfx Aajrrvkbscoi DOS-1TH, 2k metering station for Thiokol The machine will be completed and tested in simulation mode prior delivery

Condition: good (used), Year of construction: 2009, functionality: fully functional, Group - Subgroup: 7 IGU Production - Georgian bars - Sprossen S-IGL-1626 / - Online - / Rottler & Rüdiger / n.a. / Construction Year: / Georgian bars drilling machine L x W x H (2500 x 550 x 2000) / GMC Stock Place: GMR MM 1 S-IGL-1630 / - Online - / Werfeli / AFB 3E / Construction Year: / 90/45 Saw for Georgian bars with storage cabinet: PULS SL 20power supply PULS SL 5 power supply Selectron MMI 751 Selectron CPU 762 Selectron SMM 752 Selectron SDM 751 Siemens Sinamcics V20 / GMC Stock Place: GMR MM 1 S-IGL-1631 / - Online - / Werfeli / AFB 3E / Construction Year: / Georgian bars milling machine L x W x H (2500 x 1200 x 1500) - Min length 150 mm, Max no limit - Production capacity: 50 - 80 pcs/hour - Toolchange profile: ca. 4 min. - Max. 4 profiles in serial can be milled in 1 step - Computer-controlled adju / GMC Stock Place: GMR MM Bdsdpfxetwpu Rs Aacji S-IGL-1651 / - Online - / Rottler & Rüdiger / ABH-97 / Construction Year: / Manual winch radius bender for georgian bars/spacer. (Length x Width x Height) = 400 x 400 x 1350 / GMC Stock Place: GMR MM S-IGL-1652 / - Online - / Rottler & Rüdiger / n.a. / Construction Year: / Georgian bars drilling machine for filling the bars (Length x Depth x Height): 650 x 500 x 1100 / GMC Stock Place: GMR MM S-IGL-1653 / - Online - / Rottler & Rüdiger / n.a. / Construction Year: / Georgian bars dessicant filling machine (Lenght x Depth x Height): 650 x 1100 x 1200 / GMC Stock Place: GMR MM S-IGL-1742 / - Online - / Rottler & Rüdiger / AKT 2001 Basic / Construction Year: 2009 / - Georgian bars assembling pneumatic stand 2 x 1 m from aluminum profile system - Integrated measuring and fixing system from 8 till 45 mm - Pneumatic tension of the spacers for the precise rectangular alignment - Manual centering of georgian bars - D / GMC Stock Place: GMR MM S-IGL-1865 / - Online - / Hegla / Georgian Bar Division / Construction Year: / / GMC Stock Place: GMR ES S-IGL-1866 / - Online - / GMI-MR / profiel saw Georgian Bars / Construction Year: 2004 / Georgan Bar Saw / GMC Stock Place: GMR ES S-IGL-2011 / - Online - / GMI / Georgian Bar Assembling Table S-IGL-2012 / - Online - / Hegla / PV.KS / Construction Year: / / GMC Stock Place: GMR ES S-IGL-2013 / - Online - / Hegla / K 2003 / Construction Year: / / GMC Stock Place: GMR ES S-IGL-2015 / - Online - / Hegla / GM 2000 / Construction Year: 1996 / Georgian Bar Assembling table Vertical / GMC Stock Place: GMR ES S-IGL-2016 / - Online - / Tronzadoras / TL-302 / Construction Year: / aluminium saw / GMC Stock Place: GMR ES S-IGL-2018 / - Online - / Arco Industrie / MC1000 / Construction Year: 2002 / MC 1000 profile bender Arco Industrie / GMC Stock Place: GMR ES S-IGL-2020 / - Online - / GMI / FZ 2 / Construction Year: / milling for aluminum / GMC Stock Place: GMR ES S-IGL-294 / - Online - / Elumatec / AF 222 / Construction Year: 1989 / for milling of the transom-bar for windows manufacture. Type : AF 222/02 End milling machine / GMC Stock Place: GMR MM 1

Condition: good (used), Year of construction: 2002, functionality: fully functional, automatic Lisec butyl application machine, left to right, year 2002, consisting of: FRS-25Z, overhead frame conveyor for supply RZVS-25/25, frame lift (down to butyl machine level), including frame measuring device LBH-25AR, automatic butyl application machine, 2x7,5 kg butyl cylinder capacity, suitable also for Georgian bars RAVS-25/25, frame lift FRS-25A, overhead frame conveyor down to frame set section The machine is available from our stock in Hofkirchen/Austria. The machine can be seen on site on appointment. Bodpfx Asrx Ryfsacsdi

Condition: good (used), Year of construction: 2005, Sealing robot Bedpfx Aetwpateacodi VA 1K-V 2300 x 4500 mm VR MOD PU ZD 15-60 mm 1000 kg

Condition: used, Bystronic Lenhardt Inspection & frame position station V/R-RL 1.6 x 2.9 - 2900 mm long Bedpfx Aaovy Eyqocedi Transport dimensions: Inspection zone W 1230. H2410. L 3910. Outlet W 900. H2100. L 1310 S-IGL-1952 Bystronic-Lenhardt / ZP 1.6x2.5 VR SP G Conveyor with air-cushion support TB-V-LK 1.5 x 1.3, 1300 mm long + Gas-filling & press robot ZP 1.6 x 2.5 VR SP G 1 AS, spindle driving, 2700 mm long / S-IGL-1953

Condition: excellent (used), Year of construction: 2012, back gauge travel distance R-axis: 2,700 mm, Bystronic ZPG 2700x3500 VR SP 1AS 2011 Bjdpfjvy Enzox Aacjdi 2300 x 4500 mm 15 mm 60 mm 1000 kg S-IGL-2284 R-L