Used machine and parts cleaning equipment for sale (121)

Year of construction: 2026, condition: as good as new (ex-display), Parts cleaning machine / spray cleaning system, type L102 Automatically operating hot water parts washing machine with basket drive via geared motor, 2 stainless steel washing pumps (manufacturer: Lowara), 2 rotating 3-sided spray systems. Insulation of the complete system included. - Basket diameter: 910 mm - Usable height: 520 mm - Max. load weight: 250 kg - Spray pressure: 2 x 3 bar - Tank volume: 175 liters - Heating: electrically adjustable (RT - 90°C) System dimensions (L x W x H): 1,300 x 1,250 x 1,990 mm Unladen weight: approx. 300 kg Wash time timer freely adjustable (minutes and hours) Complete cleaning machine (internal components and outer casing) made of stainless steel 1.4301 Water circulation and loading basket made of stainless steel 1.4301 Insulation of the complete system (tank and cabin) made of stainless steel 1.4301 Mechanical lid locking system Bath cover with fine filter (2,000 microns) 2 suction filters as pump protection Operating hour counter Steam extraction with condensate return Parts washing machine is in new condition (test system / pilot plant) OTHER BASKET DIMENSIONS AVAILABLE ON REQUEST!!! Lodpfedz Dy Hex Aifoad This offer is non-binding and subject to change. Changes, errors and prior sale expressly reserved.

Year of construction: 2026, condition: as good as new (ex-display), Parts cleaning machine / spray cleaning system, type L90 Automatically operating hot water parts washing machine with basket drive via geared motor, stainless steel washing pump (manufacturer: Lowara), circulating 3-sided spray system with stainless steel nozzles - Basket diameter: 790 mm - Usable height: 500 mm - Max. load weight: 150 kg - Spray pressure: 3 bar - Tank volume: 105 liters - Heating: electrically adjustable (ambient temperature - 90°C) System dimensions (L x W x H): 1,150 x 1,250 x 1,900 mm Empty weight: approx. 220 kg Wash cycle timer freely adjustable (minutes and hours) Complete cleaning machine (internal components and exterior cladding) made of stainless steel 1.4301 Lsdpfsd H Slasx Aifjad Water circulation and loading basket made of stainless steel 1.4301 Insulation of the entire system (tank and cabin) made of stainless steel 1.4301 Mechanical lid locking Bath cover with fine filter (2,000 microns) Suction filter as pump protection Oil skimmer for bath maintenance Operating hour counter Steam extraction with condensate return Parts washing machine is in new condition (test facility / pilot plant) OTHER BASKET DIMENSIONS AVAILABLE UPON REQUEST!!!

Year of construction: 2026, condition: new, These parts washers are designed for spray washing, using aqueous detergents at a temperature of 60°C maximum. All machines are made of AISI 304 stainless steel and they are models for one wash treatments. These machines function thanks to the basket’s motorized rotation around its vertical axis and they are suitable for washing small and medium-sized parts, with moderate weights. Laodpfxofl Ufze Aifjd

Year of construction: 2020, condition: new, An automatic car wash is a solution that allows you to reduce costs, improve quality and increase the efficiency of the surface preparation process. The automatic car wash is equipped with a set of pumps for spraying, it has been designed so that as little liquid as possible migrates to subsequent processes after the process, saving money and improving the quality of washing. This is very important, because the apparent savings in systems made without the use of these solutions may generate much higher costs in the future related to chemicals and waste disposal, which will be simply more. Attention should also be paid to problems with maintaining the required bath parameters. Research and development works allowed us to develop a car wash with the function of drying details (Option) with hot air blown by a set of fans after the washing process. The car wash is equipped with an advanced system of creating own macro programs, which can consist of 10 steps each, depending on the number of tanks, the processes can be repeated, their order can be changed, etc. Each of the tanks has its own unique icon and name, enabling the operator to work intuitively. Ljdpefy T Rcefx Aifjad Optionally, the tanks can be equipped with bath replenishment systems, which can be carried out e.g. between processes or at the end of the cycle. • Controls installed on a swivel arm for better access • PLC microprocessor control • 7 "touch control panel • A very large number of nozzles compared to other solutions • (Option) Possibility of drying details after washing • Ability to create your own advanced programs • Advanced system of dampers made of acid-proof steel sheets, double secured with limit switches • Control system for tight closing and full opening of the flaps • To minimize fluid mixing, separate lines, nozzles, tanks for each treatment • Intelligent control - in the event of a power cut / sudden shutdown, the fluids cannot be mixed • Fully automatic operation

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit Lajdpfxsfz A D No Aifed • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2009, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: E 118/09025, For sale: OTEC fine polishing machine Lsdpfoy Rzxcox Aifjad - Type: ECO 1 X 18 - Machine No.: E 118/09025 - Year: 2009 - Weight: 50KG The machine has been regularly serviced and maintained and is in excellent condition. The polishing machine has seen very little use and is practically like new. It is suitable for fine polishing, cleaning, and deburring of demanding workpieces that have undergone various machining processes. Workpieces are placed in a tank together with media and coolant, where they are rotated and vibrated simultaneously, resulting in effective polishing. The machine operates fully automatically, with adjustable polishing time, vibration frequency, and rotation speed. It is connected to the mains and ready to operate.

Year of construction: 2006, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 70/060260, For sale: OTEC fine polishing machine - Model: DF 70 - Serial No.: 70/060260 - Year of manufacture: 2006 - Power: 2 kW - Weight: 450 kg Machine Accessories: Laedpfey Rzwxjx Aifsd - Coolant tank - Automatic polishing paste dosing system - Report printer - 10 tool holders - 1 mixer holder I am offering a polishing machine designed for the ultra-fine finishing of various metal parts after machining operations. Additionally, it is suitable for cleaning heavily soiled or stubborn residues from parts made of different materials. The machine is fully automatic and equipped with an additional coolant tank, preventing overheating of media and workpieces during operation and enabling continuous polishing for 10 hours or more. The polishing process involves fully or partially immersing the workpieces in the polishing media, allowing the granulate to reach all surfaces evenly. This ensures an even finish, even in deep or hard-to-reach areas. The machine has seen very little use and has been regularly maintained. It is currently connected to the electrical supply and ready for immediate operation.

Condition: new, Year of construction: 2026, Immediately available for collection (new machine) Metalclean P60 spray cleaning system in stainless steel Single-tank spray cleaning unit with rotating basket. Usable dimensions = D = 590 mm, H = 380 mm Lasdpfsyymbhox Aifed Load capacity per batch = 100 kg Tank volume = 60 liters Spray pressure = 3 bar Operating voltage = 3 x 400 V/N/PE 50 Hz

Condition: new, Year of construction: 2026, Metalclean P80 spray cleaning system in stainless steel Lodpfsir Apvjx Aifjad 1-tank spray cleaning system with a rotating basket. Usable dimensions = D = 780 mm, H = 430 mm Load capacity / batch = 100 kg Tank volume = 130 liters Spray pressure = 3 bar Operating voltage = 3 x 400 V/N/PE 50 Hz Oil skimmer

Year of construction: 2023, operating hours: 473 h, condition: ready for operation (used), functionality: fully functional, load capacity: 150 kg, workpiece length (max.): 480 mm, workpiece width (max.): 670 mm, workpiece height (max.): 300 mm, machine/vehicle number: 500022, TECHNICAL DETAILS Basket dimensions: 670 mm x 480 mm x 300 mm Maximum load weight: 150 kg Loading height: 850 mm Cleaning Ultrasonic frequency: 25 kHz or 75 kHz Cleaning programs: 20 individually configurable Mechanism Type and speed of rotating movement: Freely adjustable Media Circuits Circuit 1: Spray cleaning, flood cleaning, pressure-flood cleaning, suction-flood cleaning, ultrasonic cleaning Circuit 2: Spray cleaning, flood cleaning, suction-flood cleaning, ultrasonic cleaning Circuit 3: Spray cleaning, flood cleaning, batch-flood cleaning, ultrasonic cleaning Drying: Compressed air pulse, hot air drying, hot air drying with humidity sensor, vacuum drying Tank 1 Flow rate: 350 L/min Pump pressure: 3.5 bar Pump motor power: 5.5 kW Tank volume: 450 liters Tanks 2 & 3 Flow rate: 380 L/min Laodpfx Ajxamhleifod Pump pressure: 2.5 bar Pump motor power: 3 kW Tank volume: 350 liters MACHINE DETAILS System weight: 2,400 kg Dimensions: 3,100 mm x 2,200 mm x 2,200 mm Process chamber and tanks: Stainless steel Electric tank heating: Freely adjustable temperature Control: SIMATIC F-CPU Operating hours: 473 h EQUIPMENT - Bypass filtration for all baths - Compressed air pulses - Spray device

Year of construction: 2017, condition: like new (used), 2-Station Spray Cleaning Machine: - Lightly used - For sale due to production restructuring - Station 1 and 2: Spray cleaning - Automatic transport - Two independent tanks - Tank 1 with oil separator - Temperature up to 80°C Laedpfx Aekqxtzsifod - Automatic cycle with 4 program blocks - Automatic water management Transport trolley: 1,600 x 850 x 395 mm (L x W x H) Usable dimensions: 1,530 x 830 x 800 mm (L x W x H) Dimensions: Overall washing system (machine with infeed and outfeed) 13,800 x 2,000 x 2,420 mm (3,525 mm) (L x W x H (H with extension)) Infeed module 5,000 x 850 (1,140) x 700 mm (L x W x H (W with sensor)) Outfeed module 5,000 x 850 x 700 mm (L x W x H) Tank frame 2,200 x 1,300 x 1,300 mm (L x W x H) Electrical connection: 3 x 400 V, N, PE – 50 Hz - 100 A - 65 kVA

Condition: ready for operation (used), functionality: fully functional, total length: 1,100 mm, total width: 1,300 mm, total height: 1,600 mm, input voltage: 380 V, load capacity: 500 kg, empty load weight: 550 kg, Equipment: documentation/manual, Chamber washing system with rotary rack. Max. workpiece weight 500 kg, basket size 74x74 cm, max. workpiece height 66 cm. Includes loading trolley and cleaning powder. Operating manual available. Laedpoymggvjfx Aifed

Condition: as good as new (ex-display), Year of construction: 2023, Manual cleaning is carried out using special gloves in the front section. The effectiveness of the cleaning is ensured by a 0-8 BAR wash pump and a special spray nozzle. A temperature of up to 60 °C can be set for the cleaning fluid in these devices. The pressure is adjustable from 0-8 bar. Technical data: Work surface: 950 x 700 mm Internal height: 450 mm Load capacity: 70 kg Spray pressure: 0-8 bar adjustable Tank volume: 75 liters / heating capacity 2kW Basic version: - Blow-off gun in the interior - Frame, feet, cover and housing made of stainless steel - Removable stainless steel panels above the tank Lodpfsr Hm R Tjx Aifead - Flap can be opened upwards with 2 handles and gloves - Tempered glass window - Door opening/closing system supported by gas struts - Door opening monitored by safety limit switch - Filter on the suction side of the pump (500 micron) - Foot switch for operating the cleaning pump - Interior lighting - Neoprene gloves L 600mm (chemical resistant)- Adjustable feet +/- 50 mm - Stainless steel cartridge filter with pump (10/25/50 micron) - External mini-pneumatic oil separator

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, Machine body, internal pipe system, control cabinet and washing basket made of stainless steel - electronically controlled basket drive - level control - lid locking - removable filter plate - weekly timer function Oil skimmer model WE AM version Lajdpfx Aof A Nqueifod for additional manual cleaning - lid with viewing window, lighting, and sleeve gloves - low-pressure pump, 3-6 bar, with brush washing system and hand spray gun - blow-off gun, compressed air High-pressure unit, 160 bar, for AM version permanently installed on the machine side.

Condition: as good as new (ex-display), Year of construction: 2021, functionality: fully functional, maximum load weight: 500 kg, Cleaning system, type W150 Basket diameter 1,500 mm Usable internal height 950 mm Basket load 500 kg Suitable for pre-treatment before painting and final cleaning with cleaning agent Complete stainless steel design including: - Stainless steel pump, frequency-controlled - Integration of conductivity probe into the PLC - Automatic level replenishment - Electric bath heating (indirect) - 2 tank system - Eco-rinsing - 3-dimensional pulse air blow-off - Bag filter system - PLC control, Siemens S7-300, with operating panel - Direct drive for the cleaning basket - Mist extraction - Level control - Chip/particle filter with bath cover plate - Pulse compressed air blow-off including soundproofing hood - Oil separator PPT 100 Lajdpfsga Dqljx Aifjd - Pump-out device/bottom cleaning with drain valve - 2 units of drive/transport system

Year of construction: 2025, condition: as good as new (ex-display), IMMEDIATELY AVAILABLE!! Manual cleaning is performed using special gloves in the front area. Laedpfx Aef A Nqqoifjd The effectiveness of the cleaning process is ensured by a high-pressure pump and a special spray nozzle. In these devices, a temperature of up to 60 °C can be set for the cleaning fluid. The pressure is adjustable from 1 to 80 bar. Technical data: Working area: 950 x 700 mm Internal height: 450 mm Load capacity: 70 kg, optionally up to 150 kg Spray pressure: adjustable from 1 to 80 bar Tank volume: 75 liters / heating power 2 kW Standard version: • Blow gun inside the chamber • Frame, feet, lid, and housing made of stainless steel • Removable stainless steel sheets above the tank • Upward-opening flap with 2 handles and gloves • Window made of tempered glass • Door opening/closing system with gas spring support • Door opening monitoring via safety limit switch • Filter on the suction side of the pump (500 microns) • Foot switch for operating the cleaning pump • Internal lighting • Neoprene gloves, length 600 mm (chemical resistant) • Adjustable feet +/- 50 mm • External mini pneumatic oil separator

Condition: like new (used), Year of construction: 2016, Cleaning system type W 60 C Machine body, internal pipe system, switch cabinet and washing basket in stainless steel Combination machine - turntable system with removable turning device and small parts basket - Basket diameter turntable wash basket 600 mm - Usable interior height 370 mm - Basket load rotary plate wash basket 100 kg - Usable interior height 530 mm - Dimensions of small parts basket 375 x 220 x 200 mm Mesh size 12 mm - Basket load small parts basket 20 kg Complete stainless steel design Laodpfx Ajq Ewgkjifed Pump(s) and external piping/fittings Version for operation with Liquids with a density of 1.3 due to reinforced pump with frequency converter Chip/particle filter with bath cover plate ECO flushing (loss of sink) for minimum water consumption Water supply from the operator's mains supply with hot water supply on the machine side Hot air drying 1 x 4 KW Oil skimmer Pumping device/floor flushing with pump and pipe system in stainless steel

Condition: new, functionality: fully functional, Hydro Power 1200 is a professional pressure washer, made from high-quality stainless steel and designed for a wide range of applications. This washer is ideal for turbocharger regeneration and the cleaning of heavily soiled components made of steel, cast iron, aluminum, and other alloys. The cleaning process operates in a closed circuit, using MRS Cleaner Ultra Active washing fluid heated to 45 °C. The MRS Cleaner Ultra Active solution is delivered from a gun nozzle at up to 140 bar, ensuring thorough cleaning of hard-to-reach and heavily contaminated parts from carbon, grease, and oils. Both the temperature and the fluid itself enhance the washing efficiency. The washer is equipped with two filters and features adjustable leveling feet up to 20 cm. The washer lid is fitted with pneumatic struts for increased safety and work comfort. During cleaning, you can also use the installed flow-through brush or compressed air gun. The glass viewing window is equipped with cleaning nozzles to ensure clear visibility during operation. Additional features: - Thermally insulated tank – effectively protects the heated fluid from cooling too quickly. - Glass cleaning nozzles - Adjustable leveling feet - Oil separator – extends the lifespan of the washing fluid Optional accessories: - Rigid lance Laodpfxsxnl Efo Aifod - Rotating table Technical data: Total width: 1,410 mm Total depth: 800 mm Min/max height (closed): 1,720/1,920 mm Min/max height (open): 2,380/2,580 mm Working width: 1,100 mm Working depth: 700 mm Working height: 620 mm Weight: 200 kg Working table load capacity: 200 kg Working fluid capacity: 120–150 L Temperature regulation: 0–45 ℃ Lance output: up to 12 l/min Pressure: 140 bar Voltage: 3~400 V Switch: foot-operated WE ALSO OFFER OTHER HYDRO POWER PRESSURE WASHER MODELS IN SIZES 800, 1200, 1600, 2000. PLEASE CONTACT US FOR A QUOTE ON OTHER MODELS.

Condition: new, functionality: fully functional, Basket Washing Machine MRS - WASH 1200 Application: The device is designed for washing components of various sizes and weights. The washer is equipped with a mechanically driven rotary basket powered by a motor and spray nozzles. Operating Description: After switching on the main power, the bath heating process begins. Once the set temperature is reached, the washing cycle can be started. The primary washing phase is the first step, and its duration can be continuously adjusted using the timer located in the control box. When the set time elapses, the bath will end automatically. STANDARD EQUIPMENT OF THE WASHER: * Safety cover switch that disconnects during opening in the washing process * Liquid level sensor in the tank preventing dry operation * Temperature sensor * Single spray arm * Mechanically rotated basket * Double filtration system * Coarse mesh filter for insoluble contaminants (1mm mesh) * Drain valve Technical Data: Basket diameter: 1200mm Working height: 500mm Basket capacity: 300kg Working time programmability: 0-99 min Washing temperature: 60°C Heater power: 12kW Tank capacity: 400l Lsdpfx Aoxnlpdsifead Spray performance: 200l/min Spray working pressure: 4.5bar Overall width: 1750mm Overall depth: 1750mm Overall height (closed/open): 1250/2400 mm Power supply: 3~400V OUR OFFER INCLUDES OTHER MODELS OF AUTOMATIC BASKET WASHERS FROM THE MRS WASH SERIES WITH SIZES 800, 1000, 1200, 1500, AND EVEN 1500 XL. PLEASE CONTACT US FOR OFFERS ON OTHER MODELS.

Condition: new, functionality: fully functional, warranty duration: 12 months, total width: 1,750 mm, total length: 1,750 mm, total height: 1,700 mm, type of input current: three-phase, The HYDRO WASH 1200 2-in-1 automatic basket washer is a multifunctional device, enabling fully automatic cleaning of parts in a motor-driven rotary basket. For parts with more complex shapes, high-pressure washing at 140 bar is available. Thanks to the combination of these processes, this machine is versatile and can be used in any workshop. It is particularly suited for companies specializing in turbocharger, steering gearbox, and transmission refurbishing, significantly streamlining workflow. To ensure user safety and stable washing parameters, an electronic control panel and a range of integrated sensors are employed. Operating principle: Before the first use, fill the tank with washing fluid. The recommended fluid is a solution of MRS Cleaner Strong concentrate and water in the specified ratio. The Hydro Wash offers both manual and automatic washing modes. a) To activate automatic washing, prepare the device (fill with water and concentrate), close the metal glove cover, close the washer lid by simultaneously pressing two buttons (located at the front and rear of the device), and press the start button. *Basket rotation possible when the lid is open by pressing the right pedal button or simultaneously pressing the two buttons at the front and rear. The condition is that the metal glove cover must be closed.* b) To activate manual washing, close the washer lid by pressing the two buttons (front and rear) simultaneously. Open the metal glove cover and press the left pedal button. STANDARD EQUIPMENT: - Lid interlock sensor for safety when opened during washing - Liquid level sensor to protect against dry operation - Liquid temperature sensor - Adjustable spray arms with nozzles made from stainless steel by Spraying System - Mechanically driven rotary basket - High-pressure pump (140 bar) - Compressed air gun - Pressure regulator with water separator - Coarse mesh filter for insoluble contaminants (0.8 mm mesh size) - Fine filter for contaminants Lasdpfjxm Ullsx Aifed - Adjustable feet - Drain valve - Pneumatic cylinders Technical Data: - Basket diameter: 1200mm - Working height: 500mm - Basket load capacity: 300kg - Programmable cycle time: 0–99 min - Washing temperature: 60℃ - Heater power: 12kW - Tank capacity: 400l - Spray rate: 200l/min - Working spray pressure: 4.5–6 bar - Manual washing pressure: 140 bar - Overall width: 1750mm - Overall depth: 1750mm - Overall height: 1700mm (2450mm with lid open) - Power supply: 3~400V Optional equipment: - Belt oil skimmer - Low-pressure lance kit - Reinforced pump OTHER DIMENSIONS OF HYDRO WASH 2-IN-1 WASHERS AVAILABLE! MODELS 800 AND 1000 ALSO IN STOCK. CONTACT US FOR DETAILS ON OTHER MODELS.

Year of construction: 2024, condition: as good as new (ex-display), -Usable internal dimensions: D = 970 mm, H = 540 mm (other sizes available upon request) -Touch screen -Spray pressure: 3 bar -Basket load: 200 kg -Tank volume: 210 L -Standard accessories: • Oil skimmer • Frame, lid, and housing made of stainless steel Lajdpfx Aijf A Nq Uefed • Time-controlled electric steam extraction • Reinforced basket made of stainless steel • Electric pump made of stainless steel • Filter made of stainless steel on the suction side of the pump • Heating elements made of stainless steel • Mechanical basket rotation with geared motor • Electrical system IP 65, control via PLC (DGT V4) • Automatic water supply • Safety limit switch monitors lid opening • Spray nozzles made of stainless steel • Weekly timer for heating and oil separator • Operating hour counter

Year of construction: 2026, condition: as good as new (ex-display), Parts cleaning machine / spray cleaning system, type TR450 Lodpfefbt Siex Aifjad The spray-rotation cleaning system, type TR450, is an automatic cleaning and degreasing system with a lid that can be easily opened upwards. The system is designed for cleaning individual parts and/or bulk goods in baskets with dimensions of L x W x H 520 x 320 x 200 mm. For the cleaning process, the basket must be closed with a lid. The cleaning result depends on the fact that the parts in the basket can be slightly tumbled when cleaning bulk goods. The fill level in the basket must be taken into account for this purpose. The system is also equipped with a flood basin under the parts basket, which enables the parts to be immersed and scooped out, resulting in an even better cleaning result. including the following equipment: • Completely made of stainless steel 1.4301 inside and outside • Level monitoring and automatic fresh water refill • Insulation of the entire system • Hot air drying (power: 11.6 kW) • Steam extraction • Oil skimmer for bath maintenance • Automatic fresh water refill • 1 small parts basket 520 x 320 x 200 mm, mesh size: 6 x 6 mm, incl. height-adjustable locking lid Connection power: approx. 20 kW (32 amp plug)

Year of construction: 2025, condition: as good as new (ex-display), Spray Cleaning System - Parts Washing System - NEW SYSTEM / Pilot Plant Basket dimensions (octagonal): 1,287 mm Basket diagonal: 1,393 mm Useful height: 900 mm Max. loading weight: 600 kg Tank volume: 500 liters, spray pressure: 5 bar, 400 l/min. Heatable up to 90°C System made entirely of stainless steel 1.4301 (AISI 304) and dip-pickled Including loading trolley in front of the system Ledpfx Aiewitvqsfead Included special equipment: - Steam extraction including condensate return - Automatic Water refill and level monitoring - Removable coarse filter in the return line to the wash tank - Removable basket surround - Preparation for retrofitting an oil separator - Weekly timer for heating - Electric spray pipe for optimized component cleaning - Inspection hatch in the tank area - Siemens S7 1200 control system with color touch panel, manufactured by Weintek Upon request, commissioning can be carried out by qualified personnel for an additional charge.

Year of construction: 2026, condition: as good as new (ex-display), HD Wash Basin - HD Brush Washing Station The wash basin features an adjustable 60 bar HD pump, which enables cleaning to take place in a closed working area. Cleaning is carried out using an aqueous degreaser (10 kg included in the scope of supply) at approximately 45°C. Viewing window including lighting Media filtration via cartridge filter Convenient operation via foot switch includes turntable Technical data: Working area: 800 x 600 mm Usable height: 400 mm Lasdpfod H Umrjx Aifod Load capacity: 50 kg Operating pressure: adjustable up to max. 60 bar Pump capacity: 14 l/min Washing temperature: adjustable up to max. 45°C Tank capacity: 100 l Heating power: 3,000 W Total power: 7.0 kW Voltage: 400 V AC 1 P+N+PE; Frequency: 50 Hz Machine weight: approx. 140 kg Overall dimensions with open lid: 1,100 x 910 x 2,020 mm

Year of construction: 2025, condition: new, Small parts basket, washing basket for parts cleaning Material: Stainless steel 1.4301, additionally electropolished Lajdpfx Aed Innwsifsd Dimensions: L x W x H 400 x 200 x 170 (h) mm Mesh size: 5 x 5 x 1 mm with side-welded brackets including lid and closure Price excludes shipping Shipping costs €18.00 per basket in Germany and Austria Other dimensions (e.g., 600 x 400 x 170h mm) and designs available upon request.