Used machine and parts cleaning equipment for sale (130)

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, total height: 2,000 mm, total length: 1,600 mm, total width: 1,600 mm, type of input current: three-phase, controller manufacturer: Union Dialog electronic control, compressed air connection: 6 bar, water pressure: 2 bar, Used 2018 Union MDMV 1 closed-circuit vacuum solvent degreaser, 50kg basket, Dialog control, Industrial Frigo chiller and 2 Safechem units. Manufacturer: Union Model: MDMV 1 Machine Type: Closed-circuit vacuum solvent metal degreasing / component cleaning machine Year: 2018 Condition: Excellent Includes: Industrial Frigo GR2A 30/Z industrial water chiller & 2 x SAFECHEM SAFE-TAINER chemical storage/handling units Machine Description Used 2018 Union MDMV 1 industrial metal degreasing and component cleaning machine, designed for precision cleaning of small and complex metal components using super-stabilised perchloroethylene (PCE / PER / tetrachloroethylene). This is a closed-circuit hermetic vacuum solvent cleaning system incorporating washing, rinsing, vapour degreasing, solvent recovery/distillation and vacuum drying within an enclosed process. Technical Specifications Maximum Basket Capacity: 50 kg Solvent Type: Perchloroethylene / PCE / PER / Tetrachloroethylene – C₂Cl₄ Solvent Load: Approx. 397 kg / 248 litres Main Electrical Supply: 400 V / 3 Phase / 50 Hz Installed Power: Approx. 23 kW Rated Current: Approx. 46 A Steam Pressure Requirement: Approx. 4–5 bar Compressed Air Requirement: Approx. 6–8 bar Water Pressure Requirement: Approx. 2–3 bar Floor / Ground Loading: Approx. 549 kg/m² Control: Union Dialog electronic control This particular machine also has a substantial integrated solvent-management system incorporating working and recovery tanks, solvent pump, fine filtration, swarf filtration, still/distillation system, condenser, heat exchanger, separator, decanter, vacuum pump and active-carbon treatment. Continuous Solvent Recovery A particularly useful feature of the MDMV design is the continuous solvent distillation/recovery system. Union states that MDMV machines operate under vacuum for rapid washing cycles and use continuous vacuum distillation with automatic final stripping of residues, allowing contaminated solvent to be regenerated and reused during production. Industrial Frigo GR2A 30/Z Chiller Included The machine is supplied with a 2018 Industrial Frigo GR2A 30/Z air-cooled industrial water chiller. Gbjdpfxjz Itlws Aanjw Refrigerant: R407C Refrigerant Charge: Approx. 5 kg Electrical Supply: 400 V / 3 Phase / 50 Hz Rated Current: Approx. 23 A Nominal Water Pressure: Approx. 3.2 bar Temperature Set-Point Range: -10°C to +25°C Weight: Approx. 390 kg The complete installation includes: 2018 Union MDMV 1 metal degreasing machine 50 kg maximum basket capacity Union Dialog control Closed-circuit solvent cleaning system Vacuum cleaning/drying system Rotating / oscillating basket system Spray cleaning capability Immersion cleaning capability Solvent vapour degreasing Integral solvent distillation and recovery Working solvent tank Recovered-solvent / waiting tank Solvent circulation pump Fine solvent filtration Swarf filtration Vacuum pump Condenser Heat exchanger Water / solvent separation Decanter Active-carbon vapour treatment system Floor safety / spill-containment tank 2018 Industrial Frigo GR2A 30/Z industrial chiller 2 x SAFECHEM SAFE-TAINER chemical handling/storage units Stainless steel containment trays Use and maintenance handbook Electrical documentation Please Note: All specifications, dimensions, capacities and descriptions are approximate and provided in good faith.

Year of construction: 2007, condition: ready for operation (used), functionality: fully functional, For sale is our Fisa 3-chamber cleaning system for aluminum die-casting tools. The sale includes the associated ABUS crane, as shown in the picture. Plus, there are 2 full containers of cleaning agent. Gbodpfx Aaoz Rpnnsnsw

Year of construction: 2007, operating hours: 8,000 h, condition: ready for operation (used), functionality: fully functional, product height (max.): 80 mm, product length (max.): 80 mm, product width (max.): 80 mm, machine/vehicle number: 26240, This KSN Drum Washer 250 WRD is a used industrial cleaning system designed for reliable and efficient parts cleaning. The drum washing process provides consistent cleaning results while reducing manual handling and can be integrated into existing production lines. Choosing a used KSN cleaning system offers a significantly lower investment compared to a new system, combined with proven technology, fast delivery and the possibility of customization to suit the production requirements. KSN drum washers are designed for many years of operation in industrial environments. Gedpfxezy Hd Hj Aanobw Standard equipment: Grundfos pump Fully insulated construction Automatic level and pressure monitoring Technical details can be found in the attached PDF document.

Year of construction: 2005, operating hours: 10,000 h, condition: ready for operation (used), functionality: fully functional, product height (max.): 100 mm, product length (max.): 100 mm, product width (max.): 100 mm, machine/vehicle number: 7614-23, This KSN Drum Washer 350 WRD is a used industrial cleaning system designed for efficient and reliable parts cleaning. The drum washing process provides consistent cleaning results while reducing manual handling and is suitable for integration into existing production lines. Choosing a used KSN cleaning system offers a significantly lower investment compared to a new system, combined with proven technology, fast delivery and the possibility of customization to suit specific production requirements. KSN drum washers are designed for many years of operation in demanding industrial environments. Gsdpfozy Hktox Aansbw Equipment and features: Grundfos pump Fully insulated construction Automatic level and pressure monitoring Adjustable drum speed Technical details can be found in the attached PDF document.

Condition: new, functionality: fully functional, Year of construction: 2016, operating hours: 40 h, heating capacity: 12 kW (16.32 HP), product height (max.): 60 mm, product length (max.): 60 mm, product width (max.): 60 mm, machine/vehicle number: 40017, The KSN Drum Washer 350 UST Ultrasonic is an industrial cleaning system designed for efficient and thorough parts cleaning. Combining drum washing with ultrasonic cleaning technology, the system is particularly suitable for components with complex geometries, holes and cavities, as well as applications with high cleanliness requirements. Ultrasonic cleaning uses high-frequency sound waves in liquid to effectively remove contaminants while providing a gentle cleaning process without mechanical wear. Standard equipment: Siemens PLC Grundfos pump Fully insulated construction Automatic level and pressure monitoring You can find technical details in the PDF attached document. Gedpszy Euwofx Aanebw

Condition: used, Year of construction: 2013, ZIPPEL REMA K1 400 3 LB Industrial parts cleaning system (washing system) Year of manufacture: 2013 Washing, rinsing, and drying in a continuous system with a washing basket to remove oils, chips, and dirt from workpieces before further processing or assembly. Approved according to WHG (German Water Resources Act). System is currently powered. System description, technical data & plans – see PDF. All technical specifications, illustrations, and content are non-binding and without warranty. Subject to change and errors. Gjdpfx Aao Ahm Smsnjbw All other accessories visible in the photos are not included in the scope of delivery and are therefore not part of this sale. The scope of delivery only includes the accessories that are explicitly listed here, in the order confirmation, and on the invoice. EXW (Ex Works) D-92729 Weiherhammer Exclusively disassembly, removal, and loading Delivery time: immediately Subject to prior sale / Payment due immediately upon purchase.

Condition: like new (used), Year of construction: 2014, operating hours: 100 h, functionality: fully functional, Equipment: documentation/manual, MAGIDO L160E – industrial parts washer | ALMOST UNUSED We offer for sale a professional industrial parts washer, the MAGIDO L160E, manufactured in Italy. The machine has been used very little, making it an attractive opportunity for a company looking for a high-performance machine without the need to invest in a new one. Gbodpfez Ng Enjx Aansw The MAGIDO L160E is designed for the automatic washing and degreasing of large, heavy, and bulky parts. The parts are placed in a rotating basket and are intensively sprayed with heated cleaning solution during the working cycle. Key parameters: • Load capacity up to 700 kg • Basket dimensions approximately 1,100 × 1,100 mm • Usable height approximately 800 mm • Tank volume 350 liters • Maximum temperature 90 °C • Power consumption 27 kW • Power supply 400 V + N / 50 Hz • Machine weight 950 kg • Year of manufacture 2014 • Italian manufacturer MAGIDO Group • CE marking Ideal for cleaning engine blocks, gearboxes, castings, machine components, production components, and other large or heavy parts, removing oil, grease, and operational dirt. The main advantage of this machine: Despite being manufactured in 2014, the washer has been used only minimally – practically unused. Therefore, it is an attractive opportunity to acquire a professional industrial machine with a high load capacity at a significantly lower price compared to a new machine. Price: €14,999 excluding VAT Personal inspection is possible. If you are seriously interested, we will gladly provide further photos, information, or a video of the machine. MAGIDO L160E – 700 kg load capacity, professional industrial design, and minimal use.

Year of construction: 2021, operating hours: 2,500 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: VSSN49LWAPFP4PC, Steam sterilizer for use in laboratories, research, the pharmaceutical industry, biotechnology, etc. • 600-liter stainless steel chamber, AISI 316L • Double sliding door • HMI – Operating panel with a 7" Allen Bradley touchscreen, featuring a PLC, positioned on top of the chamber. • Onboard thermal printer • Water ejector Gsdpfx Aaj Aiihnsnebw • Cooling system • Solenoid valves or pneumatic valves • Load control probe • Gravity cycle • Liquid cycle • Pre- and post-vacuum cycles • Leak test • Chamber rails Electric steam generator Valves and components made of high-quality AISI 316L stainless steel.

Year of construction: 2022, operating hours: 2,200 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: VSSN49LWAPFP4PC, Steam sterilizer for use in laboratories, research, the pharmaceutical industry, biotechnology, etc. • 600-liter stainless steel chamber, AISI 316L • Double sliding door • HMI – Operating panel with a 7" Allen Bradley touchscreen, featuring a PLC, positioned on top of the chamber. Gbodps Aiikbsfx Aanew • Onboard thermal printer • Water ejector • Cooling system • Solenoid valves or pneumatic valves • Load control probe • Gravity cycle • Liquid cycle • Pre- and post-vacuum cycles • Leak test • Chamber rails Electric steam generator Valves and components made of high-quality AISI 316L stainless steel.

Year of construction: 2022, operating hours: 50 h, condition: new, functionality: fully functional, heating capacity: 12 kW (16.32 HP), product height (max.): 100 mm, product length (max.): 100 mm, product width (max.): 100 mm, machine/vehicle number: 43865, The KSN Drum Washer 350 WRD is an industrial cleaning system designed for efficient and reliable parts cleaning in automated production environments. The system combines washing, draining, rinsing and drying in one automated process, ensuring consistent cleaning results while reducing manual handling. The rotating drum provides continuous movement of the components throughout the cleaning process, making the cleaning system particularly suitable for industrial applications requiring efficient and repeatable processing of parts. Designed for continuous operation, the Drum Washer 350 WRD can be integrated into existing production lines and contributes to increased productivity and reduced operating costs. Gsdpszy E Drefx Aanjbw Standard equipment: Siemens PLC Grundfos pump Fully insulated construction Automatic level and pressure monitoring Technical specifications can be found in the attached PDF document.

Year of construction: 2016, condition: good (used), functionality: fully functional, machine/vehicle number: 45129, FISA Ultrasonic Mold Cleaning System 3 VST 1200/P-INSON+Z1, Year of Construction 2016 Manufacturer: FISA Ultraschall GmbH / FISA Manufacturing Srl Type: Special 3 VST 1200/P-INSON+Z1 Year of Construction: 2016 Serial Number: 45129 Internal dimensions of the tanks: approx. 1,600 × 600 × 1,250 mm Maximum mold weight: 2,200 kg Description Gjdpozx Eftsfx Aanobw Offered is an industrial FISA ultrasonic cleaning system for cleaning and maintaining large injection molds, die-casting molds, and other molds, as well as heavy components. The system consists of three stations arranged one behind the other for ultrasonic cleaning, cold rinsing, drying, and preservation. The design is intended for workpieces or molds with a weight of up to 2,200 kg. The VST 1200 cleaning station is designed as a noise-insulated INSON version. It features a pneumatically operated hinged cover, automatic water supply, safety float switch, vapor extraction with fans, and an adjustable timer. The ultrasonic generation is provided by two FISA USM 28/R generators and four MAGNASONIC transducers FB 550 PLAN. A cold rinsing station VST 1200 and a drying and preservation station VST 1200/P with Option D are connected to the cleaning station. The preservation station also has a pneumatically operated hinged cover, a vapor extraction system, and a sight glass for liquid level control. Above the preservation tank, there is a drip and blow-off station with side doors, a splash guard, an extraction system, and a flexible hose for blowing out the cleaned molds. Scope of supply - Cleaning station VST 1200 - Cold rinsing station VST 1200 - Drying and preservation station VST 1200/P - Two ultrasonic generators USM 28/R - Four MAGNASONIC transducers FB 550 PLAN - Pneumatically operated hinged covers - Vapor extraction system including fans - Drip and blow-off station - Stainless steel drip tray under the entire system - Two special mold support bars for a total load of 2.2 tons - Immersion rack VST 350 INOX with two inserts - Optical alarm indicator - Remaining runtime display - Weekly timer - Walkway with stairs and safety railing - Control cabinet and operating unit - Existing technical documentation Technical data - Usable internal dimensions: approx. 1,600 × 600 × 1,250 mm - Maximum workpiece load: 2,200 kg - Number of process stations: three - Sound power level according to the measurement report: 78 dB(A) - Design: Stainless steel - CE declaration of conformity available - Initial acceptance and instruction in 2016 documented - Drip tray: approx. 6,500 × 1,800 mm - Installation area including walkway and operating area according to drawing Condition Used industrial system. The system is shown fully assembled and connected in the pictures. A successful handover and instruction were documented in 2016. The current operating condition, the tightness of the tanks, the performance of the ultrasonic generators, and the function of the heating, pumps, pneumatics, extraction system, and control system should be checked again before sale or during an inspection. Inspection and functional testing possible by arrangement. Sale in the existing condition and scope of supply according to the illustrations and documentation. Dismantling, loading, and transport must be coordinated in advance due to the size and weight.

Condition: used, Zippel Crankshaft Cleaning System, Parts Washing Machine, 3520 x 520 x 700 mm Zippel Crankshaft Cleaning System L x W x H = 3520 x 520 x 700 mm Gbodpsihfn Isfx Aanew You can find more cleaning systems in various sizes – new and used – in our shop! International shipping costs available upon request!

Year of construction: 1996, condition: used, functionality: fully functional, Equipment: chip conveyor, documentation/manual, Used Complete System – Fully Operational – Inspection Possible During Production For sale is a complete and fully operational STEIMEL chip conveying and de-oiling system, which is currently still in use in serial production. The system has been used exclusively for conveying and de-oiling brass chips and is being sold solely due to the modernization of our production facilities. It is a continuous centrifugal de-oiling system. A major advantage for prospective buyers is that the system can be inspected while in operation before dismantling. Technical drawings and documentation are available. Dismantling is scheduled for October 2026. This system is ideally suited for companies in the machining and metalworking industry looking for a reliable and cost-effective solution for chip handling and the recovery of oil and coolant. Technical Data Manufacturer: STEIMEL Type: Continuous Centrifugal System, Type K50 Operating Principle: Centrifugal separation Year of Manufacture: 1996 Condition: Used, fully operational. The centrifuge drum (main component) was completely overhauled and has been back in operation since June 2026. Availability: Expected from October 2026 Location: 73630 Remshalden, Germany Processed Material: Brass chips (leaded and lead-free) Performance Godpszhui Hsfx Aanobw Capacity: 2,000 kg of de-oiled chips per 24-hour operation Residual moisture achieved: between 1.8% and 4%, depending on the chip type Residual moisture can be adjusted by: * centrifuge drum speed, or * chip elevator conveying speed * Simultaneous loading of up to 8 chip carts * Chip bunker capacity: approx. 800 litres Scope of Supply * Complete chip conveying system including centrifugal de-oiling unit * Oil reservoir not included * Technical drawings and documentation included * EXW (Ex Works), loaded and ready for collection at our loading dock Key Features * System is currently still in production use * Inspection under real production conditions possible by appointment * Robust industrial design * Proven STEIMEL quality * Sale of the complete system preferred The system has been regularly maintained and remains fully operational until dismantling. Interested buyers are welcome to inspect the equipment on site and verify its performance and condition. Additional photos, technical documentation, and engineering drawings are available upon request.

Year of construction: 2008, condition: used, functionality: fully functional, machine/vehicle number: 08021, The KMPN 100Z is an industrial, spray-immersion chamber washing machine with manual loading, manufactured by the Polish company EKO-PIL. It is a specialized device designed for degreasing and washing parts in industrial and painting processes. Washing machine dimensions [mm]: 1600x1100x1600 Basket dimensions [mm]: 615x430x280 Load weight: 70 kg Net/gross device weight: 700/1300 Washing temperature [°C]: 20-70 Washing tank capacity: 360 l Rinsing tank capacity: 210 l Gear motor: 0.12 kW Washing pump motor Rinsing pump motor Drying fan: 0.64 kW Cooling fan: 0.2 kW Installed power: 33 kW Drying heater power Washing liquid heater power Gsdsz Hylhjpfx Aansbw Rinsing liquid heater power Air pressure: 6 bar Complete documentation included.

Condition: excellent (used), Year of construction: 2018, Machine Data Machine Type: Cleaning machine with solvent and vacuum cycle Intended Use: Degreasing of metallic parts contaminated with oil and chips from mechanical machining Gbodpfxs Ahfito Aanow Usable Solvents: Modified alcohol; Class AIII hydrocarbons (flash point > 60 °C) Load Capacity: 30 kg Basket Dimensions: 371 × 221 × 200 mm (height 200 mm) Capacity (cycles per hour): 4–5 Filling Volume: 140 l Noise Level: < 70 dB(A) Control System: Siemens SIMATIC, operator panel SIMATIC HMI Solvent Tank: Empty, solvent not included in the scope of delivery Connection, Weight and Dimensions Dimensions: 1200 × 2000 × 1955 mm (height 1955 mm) Machine Weight: 700 kg Connected Load: 18 kW Mains Connection: 400 V / 50 Hz Auxiliary Voltage: 24 V DC / 24 V AC Equipment and Scope of Delivery Siemens operator panel SIMATIC HMI Accessory box with hoses, case, and small parts as shown in the photo Related accessories as shown in the photos Accessory box and accessories as shown in the photos. Solvent not included in the scope of delivery. Technical specifications are subject to change without notice. Errors and prior sale excepted. The characteristics agreed upon in the purchase contract and the agreed scope of delivery shall be binding.

Condition: used, Bous 3-chamber spray cleaning system (direct degreasing) System: 3 separate washing chambers (ideal for washing/rinsing/drying in a single cycle) Chamber size (W x H x D): 500 x 300 x 1,000 mm (perfect for long, curved workpieces) Equipment: Integrated thermostat for precise bath temperature control Control: Siemens PLC with Siemens SIMATIC operator panel Machine has already been professionally disassembled and is ready for loading onto a pallet. "Everything from a single source: We would be happy to offer you suitable bank financing for your project." More new and used items can be found in our shop! Gbjdpozz H Iuefx Aanew International shipping costs available upon request!

Year of construction: 2013, condition: good (used), functionality: fully functional, machine/vehicle number: 00038-13, For sale is a professional parts cleaning system from the renowned manufacturer Krumm-tec, model RK 30. The cabin enables safe, clean, and ergonomic work during component cleaning and workpiece post-processing. Areas of application & uses: Additive manufacturing (3D printing): Efficient removal of resin and powder residues as well as support structures (SLA, SLS, Polyjet). Conventional mechanical engineering: Degreasing, cleaning, and dust removal of metal and plastic components. Suitable for the use of cleaning media such as water, cleaners, or solvents (e.g., IPA), depending on the model. Features & advantages: Closed, ergonomic housing with a large viewing window and integrated work gloves. Workpiece support made of robust grating. Integrated lighting and extraction/filtration system for safe operation inside the cabin. Clean media separation and easy maintenance. Gedpfx Asz H H T Sjanebw Technical data: Manufacturer: Krumm-tec Model: RK 30 Working area (W x D x H): approx. 680 x 350 x 598 mm Max. load capacity: approx. 40 kg Design: Compact table/cabin system

Year of construction: 2006, condition: used, Technical data of the basic equipment Electrical connection values: Device total 230/400V 50Hz 50A 35 KW Motor washing pump 400/690V 50Hz 9,5A 4KW Heating elements: (3x9kW) 230/400V 50/60Hz 13,5A 9KW Motor steam extraction 230/400V 50HZ 1.1A 0,45kW Motor rotary basket drive 230/400V 50Hz 1.1A 0.37kW Pneumatic connection values: Gbodpjn Nyt Hjfx Aanow Compressed air supply line min. 6 bar / max. 10 bar Performance data: Wash pump flow rate 280 l/min Delivery pressure washing pump 5 bar Dimensions, weights, contents data: Liquid volume tank 1 washing 650 L liquid volume tank 2 rinsing 265 L perm. basket load 750kg usable basket diagonal 1400 mm usable height in the unit 800 mm loading height 920 mm height approx. 3010 mm width approx. 2365 mm depth approx. 1665 mm empty weight approx. 1320 kg

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 24050102129, total width: 2,000 mm, total length: 1,400 mm, total height: 3,000 mm, overall weight: 600 kg, water tank capacity: 250 l, working width: 1,200 mm, Front-loading wash system with automatic and manual operation. Temperature range in automatic mode: 0-80°C, in manual mode: 0-45°C. Washing table diameter: 120 cm. System made entirely of AISI 304 stainless steel. PLC control with a 10" touchscreen, air gun, steam extraction, filter system, etc. Gjdpfx Aozlqffjanjbw Inspection and test cleaning are possible.

Condition: used, BIO-CIRCLE Type: RWR 80L Auto KST Description: RWR 80 L KST Fully Automatic PLC Parts Washing System The RWR systems from Bio-Circle are the optimal solution for cleaning internal circuit systems without disassembly. The unit is space-saving, quiet, and very easy to operate. Due to the completely closed system, there is no odor nuisance from the cleaner or the dirty water. External dimensions: approx. 1200 x 800 x 1050 mm Power supply: 400 V 50 Hz plug 16A CEE 5p 6h Drain: 1 1/4“ outlet Technical specifications: Type of contamination: Limescale, rust (mineral), oil, grease Quantity of parts: Individual parts, small series, low quantities Component geometry: Complete components (without disassembly) Quality seal: Stainless steel, service package available Maximum filling volume: 80 L Tank material: V2A stainless steel Electrical connection: 400V / 50 Hz Heating: 4.5 kW Flow rate: 25 l/min Temperature (preset): 60 °C Total weight of the cleaning system without tank filling: 180 KG Gbsdpfx Aaszgclmonow Application area: The RWR 80 L KST Fully Automatic PLC has been developed for the plastics injection molding field and can be used wherever cooling channels (circuit systems, lines) need to be cleaned. Application: Fill the RWR 80 L KST Fully Automatic PLC with Power Cleaner KST 2.0. Once the minimum fill level is reached and the system is switched on, the system will begin to heat up. During the heating period, the system can already be connected to the tool via the two hoses. The 5-stage cleaning program and the change of flow direction run automatically after the instructions displayed on the display have been confirmed. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Year of construction: 1986, condition: used, functionality: fully functional, Equipment: documentation/manual, BVL Rotocleaner 750 This cleaning and degreasing system with steam extraction fan and oil skimmer is in good used condition. Manufacturer: BVL Oberflächentechnik Year of manufacture: 1996 In 2011, the washing machine was completely overhauled, and the gear motor, heater, gas spring, and heating element were replaced. Automatic basket washing system with removable rotating basket. Basket diameter: 720 mm (internal diameter) Basket height: 140 mm (internal height) Max. usable height (wash load): 450 mm Max. batch weight: 500 kg External dimensions: Width 1190 mm, Depth 1170 mm, Height 1170 mm. Weight: 290 kg Operating manual, technical documentation, and CE declaration of conformity for the system are available. The housing of the cleaning system and the associated pipelines are made of stainless steel. Cleaning is carried out using a special nozzle system with wide-band nozzles and a driven rotating basket. A U-shaped spray system ensures easy operation with high efficiency. The nozzles are supplied by a powerful circulation pump, which ensures intensive treatment and is equipped with a carbide mechanical seal. Heated tank in the lower part of the system. If the bath level drops below a certain point, a water level switch ensures automatic refilling. This ensures safety for the heating elements and pump, as well as clean and precise dosing of the required amount of water. Internal return baskets filter out coarse dirt from the washing liquid. A vapor extraction system removes steam before the hood is opened. The lid is supported by a gas spring. Simple loading system allows for quick workflow. Loading with a crane is possible. Price: negotiable Our asking price per unit is €1,890.00 net ex works, plus packaging costs. All technical data is subject to typographical errors and omissions. Gbedpfxswzwfgj Aanew Sale is limited to countries within the EU.

Year of construction: 2026, operating hours: 20 h, condition: new, functionality: fully functional, operating temperature: 60 °C, air pressure: 2.5 bar, conveyor belt width: 400 mm, heating capacity: 18 kW (24.47 HP), product height (max.): 200 mm, product length (max.): 800 mm, product width (max.): 400 mm, machine/vehicle number: 45664, Beltline / Conveyour Cleaning System 400 WRD is developed as a compact and efficient solution for parts washing directly in the production line. The Beltline Series is specifically designed for industrial parts washing and degreasing of components with a certain level of complexity or weight, or in applications where gentle handling is required. The energy-efficient design reduces both operating costs and manual handling, making the solution ideal for both small batch production and continuous operation. Standard equipment: Siemens PLC Grundfos pump Fully insulated construction Gsdpfxozy Eqxs Aanebw Automatic level and pressure monitoring You can find technical details in the PDF attached document.

Year of construction: 2021, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 20681, The Semmelroth S 50229/2 is a fully automatic, industrial continuous cleaning system in a timed linear design. It was specifically developed for the demanding cleaning of parts and surface preparation of aluminum and cast parts in industrial multi-shift operations. The system is completely made of stainless steel to ensure maximum corrosion resistance and durability when using aqueous cleaning media. System and Conveyor Technology - Transport system: Integrated, automated carrier circulation system. - Process coupling: Designed for timed linear systems for seamless integration into linked production and robotic cells. - Carriers: Customer-specific carrier design for precise and repeatable component placement during the process. Zone Layout and Process Steps The system goes through a five-stage process chain to meet the highest requirements for particulate and film-like surface cleanliness: - HD cleaning zone (high pressure): Mechanical pre-cleaning using high-pressure nozzles for targeted removal of chips, machining residues, and stubborn contaminants. - Cleaning zone (washing): Aqueous main cleaning (spraying/flooding) for chemical degreasing and removal of dirt from the surface. - Rinsing zone: Downstream rinsing stage for residue-free removal of cleaning agent components from the component surfaces. - Drying zone: Highly efficient blowing and drying unit for complete removal of residual moisture (prevents staining and corrosion). - Cooling zone: Targeted component cooling at the end of the process to thermally stabilize the parts for subsequent processes (e.g., metrology, testing, or packaging). Media preparation, filtration, and peripherals To ensure long bath life and consistent cleaning quality, the system is equipped with extensive peripheral technology: - Filtration: Three separate filtration stages (each designed for up to 10 bar) for the cleaning, rinsing, and high-pressure zones. Gbedpozzpb Rofx Aanow - Filter monitoring: Dual differential pressure measurement for automatic detection of the filter saturation level. Oil separation: 1x highly efficient oil separator (Type ÖT 60) for continuous removal of foreign oils from the washing bath. - Exhaust air management: 1x air-cooled condenser (Type RL 150) for condensation and extraction of process fumes (reduces humidity at the installation site). - Fluid management: Integrated wastewater piping for cleaning and rinsing tanks, including a robust 1" wastewater pump for emptying. Safety and System Monitoring - Process control: Two integrated viewing windows with splash-proof interior lighting for optical monitoring of the cleaning process during operation. - Environmental protection / emergency protection: Robust drip tray under the entire system, equipped with a leak detection probe for automatic shutdown in the event of media loss. Technical Performance Data - Manufacturer: Semmelroth Anlagentechnik - Model: S 50229/2 - Total connected load: approx. 110 kW - Material: Stainless steel (V2A / V4A)

Condition: used, Bous Waschfix WSA 70 T3 Cleaning and Degreasing System BOUS Cleaning & Degreasing System Waschfix WSA 70 T3 Usable space: 700 mm Filling volume: 180 l / 180 l Temperature °C Heating: 12 / 6 kW Extraction: 0.25 kW Drying: 5 kW Compressed air: 6 bar Voltage: 230/400 V Control voltage: 24 DC Total power consumption: 54 A 400 V Year of manufacture: 2009 Special equipment: Fine filter Drainage pump Filter monitoring You can find more new and used items in our shop! Godpfx Aspq N I Deanobw International shipping costs available upon request!

Condition: used, DÜRR Type: DÜRR 1K adhesive application system Dürr 1K adhesive application system with drum pump, dispenser, and heated hose (approx. 5m). Technical machine description: Condition of the system: The drum pump, feed hoses, dispensing unit, etc., are contaminated with old adhesive and must be cleaned or replaced. The system has approximately 20 operating hours. Gbodjzgckcjpfx Aanow The machine was used in a research facility. Year of manufacture: 2017 Air inlet pressure: Max. 6 bar Dimensions: Approx. 1.5 x 1 x 1.5 meters 1 adhesive control unit DÜRR (110017040) 1 single drum pump (110014004) Weight: approx. 300 kg Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and information are subject to change!) We will gladly answer any further questions you may have by telephone.