Year of construction: 2023, condition: ready for operation (used), General Data Machine weight 175 kg This Zoller Smile 420 was manufactured in 2023. It features image processing technology with a Z-axis length of 400 mm and an X-axis radius of 200 mm. The machine supports a maximum diameter of Ø400 mm and requires a compressed air pressure of 4–6 bar. Ideal for precise optical measurements, consider the opportunity to buy this Zoller Smile 420 optical measurement machine. Contact us for more information about this machine. Application Types Ibjdjx E Efpepfx Ah Ujf Measuring

Condition: good (used), Probe, touch probe, 3D probe, stylus, probe head, digimatic indicator, scanning head, measuring head -Manufacturer: Heidenhain, scanning head -Type: LIDA 19/200 -ID No.: 233 039-16 -Number: 2x scanning head available -Price per piece Ibedpfx Ahemhmxfo Uof -Dimension: 180/90/H40 mm -Weight: 0.3kg/pc.

Condition: used, Year of construction: 2011, length 300 mm centre height ca. 30 mm diameter 0,5 - 52 mm Ibodpswmwwaefx Ah Uef weight of the machine ca. 0,103 t dimensions of the machine ca. H 0,84 x L 1,00 x P 0,435 m Serviced and calibrated by Studenroth on 24.07.2024 Length and diameter measuring device: Equipment/accessories: -Software -monitor and computer -Technical documentation

Condition: used, weight 1 kg taper MK 4 Isdpfjl Idr Nsx Ah Uobf different center points. price per piece.

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 11311, workpiece weight (max.): 30 kg, type of input current: three-phase, input current: 12 A, input frequency: 50 Hz, input voltage: 400 V, rotor diameter: 1,000 mm, Balancing Machine, vertical shaft. Isdpfsx H Aa Tsx Ah Uobf Measurement in two planes. Maximum rotor weight: 30 kg (tooling included). Automatic Indexing (rotor will, after measurement be positioned with correction location at the front). Rotor speed can be set for each programmable standard workpiece type. Some tooling is included. Machine is available because fans are no longer built by the customer.

Condition: ready for operation (used), Year of construction: 2020, General Data Machine weight 2350 kg Measurements height 2700 mm Dimensions Machine Length 2100 mm Main Drive Number of axis 3 Movement Ibsdpfex D Hvqex Ah Ujf X-Axis Movement 600 mm Z-Axis Movement 500 mm Y-Axis Movement 700 mm This 3-axis EROWA CMM Qi was manufactured in 2020. It features a travel range of 600mm on the X-axis, 700mm on the Y-axis, and 500mm on the Z-axis. The machine can handle a maximum workpiece weight of 650kg and includes advanced components like the PH10MQ touch probe system and FCR25-L6 touch probe changer. Ideal for precise measurements in quality control processes. Contact us for more information about this machine. Application Types Measuring

Condition: good (used), Pharyngeal theory, border pharyngeal theory, double-mouthed -Throat study including: good and reject sides -Measuring range: 3/4/5/6/7/8/9/10/12/14/15/25/53 mm Iodjdyk Dcepfx Ah Usbf -various manufacturers -List: in the photos -Sale: only complete set -Weight: 4.9 kg

Year of construction: 2004, condition: used, z-travel 200 mm clamping diameter of cutter heads max. 550 mm max. permissible cutter head weight 150 kg mounting plaute diameter for cutter heads 360 mm taper for cutter heads, nominal diameter 500 mm weight of the machine ca. 2,3 t dimensions of the machine ca. 2 x 1,5 x 2,03 m Cutter Head Set-Up- and -Measuring Machine In the manufacturing process for spiral-toothed bevel gears, the quality of the gear cutting gear cutting tools used plays a decisive role. Particularly in dry milling, high gear cutting quality and a long service life can only be achieved with precisely adjusted cutterheads. The Oerlikon cutterhead setting and testing device CS 200 enables quick and easy setting of the individual knives and simple adjustment of the individual knives, it checks the position and documents the measurement results. The measuring sequence on the CNC-controlled testing device is partially automated: The individual actions for carrying out the actions for carrying out the sequence are displayed on the screen via the operator guidance. The positioning of the individual knives in the cutter head and the height of the knife tips is largely automatic thanks to a special sequence and is simultaneously documented Ibodpfjvq Sd Rex Ah Uef by means of a run-out diagram. A subsequent measuring sequence checks the radial position of the inner and outer cutting edges of all knives in the cutterhead. If individual test parameters on the knives do not correspond to the the tolerance specifications, this can be individually repositioned. The combination of semi-automated setting sequence, operator-guided set-up actions and automatic operator-guided set-up actions and automatic measuring sequence, cutterheads can be can be set conveniently, quickly and with high precision. Operator-guided setting and test sequence - Graphic display of the cutter head design and the measurement results with tolerance check - Instructions for the operator in plain text Instructions for the operator in plain text (without coded information) - Simple assignment of the measurement results to the knives - Documentation of the setting and measurement results via printer- Setting and test sequence suitable for ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® types - Interface for neutral data

Condition: used, Year of construction: 2014, length 1200 mm width 800 mm Thickness 160 mm Iedpfxjv Ig Acj Ah Uebf

Condition: ready for operation (used), Year of construction: 2016, Main Drive Number of axis 5 Movement X-Axis Movement 800 mm Y-Axis Movement 1500 mm Z-Axis Movement 700 mm Additional Equipment Renishaw PH10M Plus head Air Supply: Clean compressed air required Ambient Temperature: Stable temperature (20 °C ±1 °C) required Iodpox D H Efsfx Ah Uebf This 5-axis LEADER Miracle NC8157 was manufactured in 2016. It features a Renishaw PH10M Plus head and a range of 1500x800x700 mm, fully calibrated for precise measurements. Consider the opportunity to buy this LEADER Miracle NC8157 CMM machine. Contact us for more information. Application Types Measuring

Condition: good (used), Micrometer screws -Measuring range: 225-250 mm -One rotation of the drum corresponds to: 0.5 mm -with locking device -Measuring force: Ratchet -Hand protection -Quantity: other sizes also available -Weight: 2.5 kg Isdpfx Aheb A I H Ao Ujbf

Condition: used, Year of construction: 1983, longitudinal travel 1 mm Iedpfx Aheu Sbc Aj Usbf cross travel 1 mm table length 1 mm weight of the machine ca. 0,5 t dimensions of the machine ca. 1,5x0,8x1,9 m

Condition: ready for operation (used), Year of construction: 2010, Main Drive Number of axis 3 Movement X-Axis Movement 800 mm Y-Axis Movement 1000 mm Ibodpsx D Nrhofx Ah Ujf Z-Axis Movement 700 mm Additional Equipment Probes: 2 included This 3-axis Wenzel XO 87 was manufactured in 2010. It features a robust CMM machine design with X-axis travel of 800mm, Y-axis at 1000mm, and Z-axis at 700mm. If you are looking to get high-quality measuring capabilities, consider the Wenzel XO 87 machine we have for sale. Contact us for more information. Application Types Measuring

Condition: good (used), Micrometer screws, micrometer screws, tooth width measurement, plate measuring surfaces -Measuring range: 275-300 mm -One rotation of the drum corresponds to: 0.5 mm -with locking device -Measuring force: Ratchet -Adjustable dimensions Isdpsb A R H Dofx Ah Uebf -Hand protection -Key -Quantity: other sizes also available -Weight: 1.5 kg

Condition: used, Year of construction: 1997, y-travel 850 mm z-travel 600 mm y-travel 700 mm Ijdpfxswhf D Ro Ah Usbf weight of the machine ca. 3,7 t dimensions of the machine ca. 1,6x1,6x3,1 m

Condition: ready for operation (used), Year of construction: 2023, This Mitutoyo Crysta Apex C 7106 was manufactured in 2023. It has been completely overhauled and features various probe trees along with GEOPAK and CAT1000PS software. Kept in a measuring room and regularly calibrated, this machine ensures reliable precision. Contact us for further details regarding this machine. • Completely overhauled in 2023 • Machine kept in the measuring room • Regularly calibrated Additional equipment • Various probe trees Ibjdsx Iliaspfx Ah Uef • GEOPAK and CAT1000PS software

Condition: good (used), Micrometer screws, micrometer screws, tooth width measurement, plate measuring surfaces -Measuring range: 50-75 mm -One rotation of the drum corresponds to: 0.5 mm -without locking device -large measuring surfaces -Measuring force: Ratchet Ibjdpfx Aheb A R Hys Uef -Including: case -Adjustable dimensions -Hand protection -Quantity: other sizes also available -Weight: 0.7 kg

Condition: used, length 400 mm Ibsdpfxsd Iha Rj Ah Usf width 270 mm weight of the machine ca. 0,02 t dimensions of the machine ca. 0,4x0,27x0,03 m

Condition: good (used), Lever gauge, dial gauge, probe, probe, centering device Ijdpfx Ask H R E Tjh Uebf -Manufacturer: Mahr, Millimess dial gauge -Measurement range: 0-50 µm -Reading accuracy: 0.001 mm -Dimensions case: 110/80/H20 mm -Weight: 0.2 kg

Condition: used, Hardness testing device, hardness measuring machine, hardness tester, hardness tester -Hardness tester: according to Brinell and Rockwell Accessories are missing and therefore it is sold as defective. -Handover in its current condition as inspected Iedpfob A Rkvox Ah Uobf -Dimensions: 600/220/H660 mm -Weight: 92 kg

Condition: used, Hardness tester, hardness measuring machine, hardness tester, impact hardness tester -Handover: in its current condition as inspected -Tool set: incomplete -Hahn & Kolb: mobile hardness testing device Iedpshck U Sjfx Ah Usbf -Individual components: see photos -Box dimensions: 355/190/H95 mm -Weight: 5.4 kg

Condition: good (used), Year of construction: 1978, hardness tester, hardness measuring machine, hardness tester, hardness tester, universal hardness testing machine -Manufacturer: Reicherter, hardness tester according to Brinell/Vickers and Rockwell on solid base -Type: Briviskop BVR 187.5 H -Projection: 250 mm -Test height: 280 mm -Accessories: see photos -Total dimensions: 1200/700/H1730 mm -Weight: 256 kg Ibedpfx Aju Ha U Toh Uof

Condition: good (used), Height gauge, parallel gauge, height measuring device Ibsdpex Exxcefx Ah Ujf -Altitude gauge: Altimeter -Max. working height: 1000 mm -Dimensions: 280/160/H1100 mm -Weight: 7 kg

Condition: good (used), Vernier caliper, caliper, vernier caliper Ibedpfog Snz Sox Ah Usf -Manufacturer: Mauser, calipers, vernier calipers -Measuring range: 0-500 mm -Vernius: 0.05 mm -Dimensions: 655/157/H11 mm -Weight: 1.0 kg

Condition: good (used), Vernier caliper, caliper, vernier caliper -Manufacturer: Helios, caliper gauge with fine adjustment -Measuring range: 0-500 mm Ibsdpfou Inqlsx Ah Uef -Vernier: 0.05 mm -Dimensions: 655/230/H15 mm -Weight: 1.1 kg