Condition: used, Dionex / ThermoFisher FLM: Temperature range: 5–70 °C (max. 15 °C below ambient temperature) Temperature accuracy: ±0.5 °C Temperature stability: ±0.1 °C Temperature precision: ±0.1 °C Column capacity: Up to 3 columns, max. 30 cm length Heating time: From 20 to 50 °C in less than 25 min (at 23 °C ambient temperature, ±0.5 °C) Cooling time: From 50 to 20 °C in less than 35 min (at 23 °C ambient temperature, ±0.5 °C) Control: All functions software-controlled via USB 1.1 I/O interfaces: 2 digital inputs, 2 programmable relay outputs Column recognition: Electronic identification system for 3 columns Switching valves: 1 or 2 thermostated microvalves with low dispersion (10 ports or 6 ports) Flow splitter: Nano, capillary, or thermostated micro-flow splitter with flow splitter identification system Flow control: Electronically controlled and actively balanced flow splitter, independent of solvent composition and backpressure Column flow range: 50 nL/min to 2.5 mL/min using a predefined splitter and active flow control Flow range selection: 50 nL/min to 1,000 nL/min (using a Nano-LC splitter) 0.5 μL/min to 10 μL/min (using a capillary LC splitter) 10 μL/min to 160 μL/min (using a micro-LC splitter) Gradient delay time: Typically 600 nm. Noise: At a wavelength: Hjdpoxtb Efsfx Ab Ujfr

Year of construction: 2025, condition: new, Hydraulic C-frame press (punch press) Year of manufacture: 2025 Capacity: 100 tons at 230 bar Control / key switch: 1. Manual setup mode without light sensor 2. Automatic (at full speed) with light sensor Main cylinder: Ø 230 mm Auxiliary cylinders: 2 x Ø 50 x 30 mm Auxiliary guide: 2 x Ø 50 mm Motor: 11 kW – 15 hp Hfjdpowag Rijfx Ab Ujr Pump: 16 cc – 23 liters / ASC – Helical gear pump Speed: Forward 110 mm/sec – Return 200 mm/sec Pressure phase: 9 mm/sec Installation height: 500 mm Stroke length: 400 mm. Push plate: 750 x 600 mm. – with T-slots Table top: 750 x 600 mm. – with T-slots Table height: 850 mm. (Floor to table top edge) ----- Hydraulic accessories: Hydraulic control block & accessories: REXROTH Pressure adjustment via PLC. (20 – 100 tons) Speed adjustable via PLC. Air cooler Feed valve NG.63 Control accessories: Siemens S7-1200 Blsbjftg Sgsmmvyhwof Main control box Foldable control panel With side safety door (doors can be moved backwards) SICK 750 + 150 mm light sensors. Ruler for adjusting the stroke length 7" PLC screen – Siemens Movable two-hand control Alarm indicator for faults (light & sound) ----- • The press complies with the EN693 Machinery Directive • Hydraulic two-way valves • Dual-channel fused control system • Safety PLC – SICK • Operating instructions & parts list (German) • Warranty: 24 months ----- Oil capacity: 190 liters (Tank volume: 205 liters) Total weight: approx. 5,500 kg. Overall dimensions: 1300 x 2000 x 2750 mm. Delivery time: 2 - 3 weeks from stock. Paint finish: Light gray & dark gray The machine is available immediately in 2 - 3 weeks. Freight: approx. €2,000 from Konya to Germany

Year of construction: 1993, condition: used, This listing is for a Abbott 3531 Centrifuge Listing: Abbott 3531 Centrifuge Quantity: 1.0 Hfsdpfx Aexvz U Ejb Ujr

Condition: good (used), Year of construction: 2020, Fully automatic assembly line for MA disposable face masks Manufacturer: PIA Automation Model: PIA-M200101 Year of manufacture: 2020 Mask type: - 1-ply nonwoven masks - 3-ply nonwoven masks Mask size: 17.5 × 9.5 cm (adult) Output: 80 units/min Ultrasonic frequency: 20 kHz Machine dimensions: 6000 x 5000 x 2800 mm Voltage: 400V – 50 Hz Compressed air: 5-7 bar Power supply: 12 kW Cycle time: 80 units/min High throughput: 100,000 pieces per day Hodou T Rydspfx Ab Usfr Simple and safe operation Automatic alarm system Integrated, intelligent control system Single-person operation The production process includes: - Feeding of filter material, folding and pressing - Feeding of nose bridge clips - Mask forming - Mask cutting - Ultrasonic welding of ear loops - Stacking for packaging and other auxiliary processes Particularly suitable for the production of 3-ply disposable masks. Additionally equipped with a UV unit to enhance purity standards, and a stacking device to prepare for further packaging. 101225ä

Condition: excellent (used), Here we offer you an Iridex laser system OcuLight TX. IRIDEX OcuLight TX Green 2.5 W 532 nm laser system, main console including foot pedal, key, cable OcuLight TX solid-state laser systems emit true continuous-wave green laser light (532 nm) for ophthalmic applications. The models OcuLight TX and GLx are also indicated for otolaryngological applications. Improper use of the laser system may result in undesirable side effects. OcuLight TX Ophthalmology: Retinal photocoagulation Laser trabeculoplasty Iridotomy Iridoplasty Otolaryngology: Stapedectomy Stapedectomy IRIDEX OcuLight TX Green 532 nm Laser Outstanding efficiency with a whopping 2500 mW of deliverable laser energy provides pulse duration and pulse intervals from 10 to 3000 ms Provides TrueCW laser pulses for maximum control and precision Flexible range of delivery devices and wide choice of handpieces for different surgical procedures Optional remote control and wireless foot control to reduce clutter and improve ergonomics and control Quiet operation eliminates distractions Lightweight, portable design is easily transported between treatment rooms and offices IRIDEX OcuLight TX Green 532 nm Laser Green treatment laser: 532 nm Target laser: nominal 632 nm Cooling: on-demand whisper fan 10-3000 ms exposure duration and repetition interval Hfjdpfx Aonp Icajb Uer Compatible with EndoProbe, LIO, OtoProbe and SLA Power output: EndoProbe 0-2000 mW, LIO 0-2000 mW, OtoProbe 0-2500 mW, SLA 0-1800 mW Weight: 6.4 kg Length: 15 mm width: 30 mm Height: 30 mm Type: IRIDEX OcuLight TX Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: used, This listing is for a Sartorius MSA4202S 8.2g-2500g Precision Balance The unit is in full working condition and is ready for immediate release. Modular design (part of the Cubis® series) – the system is built of a weighing module + display/control unit + interface modules, designed for flexible configuration. High-resolution colour TFT display + touchscreen interface, offering an intuitive user interface. Multiple interfaces standard: USB, Ethernet, RS-232, SD card reader for data transfer and traceability. Functions typically include: weighing, density determination, averaging, formulation, percentage-weighing, check-weighing, totalising. Hodpfxjxuu Hle Ab Ujfr Assisted (and optionally motorised) levelling; the system detects inclination and assists the user in levelling the instrument. Automatic internal calibration (isoCAL) for improved stability and lower drift. GLP/GMP/traceability ready: audit trail functions, user profiles, etc

Year of construction: 2020, condition: good (used), FFP2 Mask Machine - Mask Production Line Manufacturer: Ruhlamat Model: MPL FFP2/016 Year of manufacture: 2020 Hfodpfjrm R Hdex Ab Uor Mask Production Line for N95/FFP2 Masks Installation dimensions (LxWxH): 8921 x 1494 x 1985 mm Clearance around unit: 1500 mm all around Frequency: 50 Hz / 2.6 kVa Pressure: 6 bar Approx. weight: 2500 kg FFP2 masks are made of 3-6 layers of nonwoven fabric. This machine can produce masks with up to 6 layers. The machine consists of five stations: Station 1 = Unwinder Station 2 = Punching nose clip and embossing roller welding Station 3.1 = Printing and welding ear band Station 3.2 = Folding edge alignment Station 4 = Welding mask contour and cutting out mask

Condition: used, Heraeus / Thermo Hjdow Euwzjpfx Ab Usfr Type: UT 6200 Heraeus / Thermo heating and drying oven Process control up to 300°C External housing: Depth 715 mm, Width 895 mm, Height 816 mm Internal dimensions: Depth 503 mm, Width 554 mm, Height 644 mm External diameter: Inlet/outlet connection 40 D Internal volume: 180 liters Steam chamber: 240 liters 1/PE AC, 230 Volt, 50 Hz, 12.0 A, 2.65 kW Weight: 100 kg Type: UT 6200 Condition: used Scope of delivery: (see picture) (Subject to change and errors in the technical data!) If you have further questions, we are happy to answer them by phone.

Condition: used, This listing is for a Sartorius MSA124S Balance The unit is in full working condition and is ready for immediate release. The MSA124S is part of the Sartorius “Cubis” series of analytical balances, which are modular, high-performance instruments designed for milligram-level weighing. Very fine resolution / readability: it supports a readability of 0.1 mg (0.0001 g) in many configurations. Weighing capacity: around 120 g (for the “124” model) in the typical configuration. Excellent repeatability and linearity: e.g., repeatability ≤ ±0.1 mg, linearity ≤ ±0.2 mg. High-end interface and connectivity: E.g., Ethernet, USB, RS-232, optional Bluetooth; also SD-card reader for data transfer. Advanced ergonomic features: tiltable and removable display/control unit, motorised draft shield (in certain variants) to minimise environmental influences. Compliant with GLP/GMP/laboratory traceability requirements: audit trails, user profiles, leveling assistance etc in higher-end configurations Because of its high precision and fine resolution, the MSA124S is best suited for: Analytical laboratories performing gravimetric measurements, chemical/ pharmaceutical labs, material science labs. Hfjdpoxuqmnjfx Ab Ujr Applications where small sample masses must be weighed accurately (e.g., formulations, dosing, microparticles). Environments requiring audit-trail/logging, connectivity, and data export (e.g., regulated labs). Use cases where drift/offset must be minimised and environmental effects (drafts, vibrations, static) must be managed.

Condition: excellent (used), Optical emission spectrometer Ultima 2 benchtop device, sequence spectrometer with a 1m monochromator, 2400 g/mm grating in first and second order 160-800 nm without image Quick overview analysis IMAGE: Quick overview analysis IMAGE NAVIGATOR for JY 2000-2, Hjdpfeur Rmvjx Ab Ujfr JY Ultima 2 or JY Ultima 2C External closed cooling circuit for cooling the Ultima 2's HF coil Argon humidifier - for analyzing solutions with a high salt content. ULTIMA 2 ICP-OES - Optical Emission Spectrometer reliable high-efficiency 40.68 MHz semiconductor generator complete and precise wavelength scan from 160 to 800 nm as standard highest practical resolution

Condition: used, This listing is for the Cole Palmer MasterFlex LS Pump Head 07528-10 with easy load ll pump head The unit is in full working condition and is ready for immediate release Cole-Parmer Masterflex L/S Easy-Load II Pump Head The Cole-Parmer Masterflex L/S Easy-Load II Pump Head is a high-performance peristaltic pump head designed for laboratory and industrial applications that require precise fluid handling. This updated model builds upon the original Easy-Load design, offering enhanced features for improved efficiency and ease of use. Key Features New Design and Automatic Tubing Retention: The updated design allows for easy tubing changes without removing the head from the drive. Automatic tubing retention secures the tubing without the need for manual adjustments, simplifying setup and reducing the risk of errors. Three-Roller Design: This design provides smooth and consistent flow, reducing pulsation and improving fluid transfer performance. Adjustable Occlusion: Fine-tune the occlusion to balance tubing life and pressure performance. By adjusting the "squeeze" on the tubing, users can optimize pressure, suction capabilities, and extend tubing life. Stainless Steel (SS) or Cold-Rolled Steel (CRS) Rotor/Roller: Choose between stainless steel or cold-rolled steel for increased durability and enhanced chemical resistance, catering to various operational needs. Stackable Design: The pump head is stackable for multichannel applications, and the rollers are offset by 45° to minimize pulsation when multiple pump heads are combined. Compact Design: The compact design ensures efficient use of space in laboratory or industrial setups. Hfjdpjxuqh Esfx Ab Usr Multiple Tubing Sizes Compatibility: The pump head accepts various tubing sizes, including L/S 13, L/S 14, L/S 16, L/S 25, L/S 17, and L/S 18. This provides maximum flexibility for different fluid handling applications. Automatic Tubing Retention for Easy Setup: The automatic tubing retention system eliminates the need for manual adjustments, ensuring an easy setup process, improved tubing life, and better overall performance. Flow Rate Range The pump supports flow rates from 0.06 to 2300 mL/min, depending on tubing size and drive settings, providing flexibility for a wide range of applications.

Condition: excellent (used), Heraeus drying cabinet hot air sterilizer Here we offer a Heraeus drying cabinet hot air sterilizer. Manufacturer / Type: Heraeus SUT 6060 Features: Temperature range: 250 °C Net volume: 52 litres Weight (empty): 53 kg Internal dimensions: depth 339 mm, width 403 mm, height 380 mm Hjdpfxsg Airfo Ab Uofr External dimensions: Depth 535 mm, width 744 mm, height 552 mm Rated voltage 230V, rated frequency 50/60Hz, rated current 7.1 A, rated power 1.64 kW Type: SUT 6060 Condition: used / used Scope of delivery: (see picture) (Changes and errors in technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Here we offer you a weathering test instrument. Heraeus Atlas Xenotest BETA a universal weathering instrument for testing the light fastness and weathering resistance of materials under normal, high temperature and high performance conditions. XENOSENSIV Gear Regulation of the lamp power in W/m² XENOCHROME 320 35-100 W/m² Sample chamber temperature controlled up to 80°C degree Hodpfeg Dglyox Ab Ujfr Measuring sensors at sample level XENOSENSIV E(300-400 nm) Humidification / Sprinkling Water supply with integrated water tank Sample chamber temperature: Ambient - 80 °C Black standard temperature: surface - 130 °C Relative humidity: 10 % - 95 % Electronic version: 3/N/PE AC 400V± 10 % 50-60 Hz Mains connection: 32A Power consumption: approx. 12kVA Rated power of xenon lamp 2200VA Power of Xenon lamp 2800VA Rated current 16A Lamp current max. 20A Dimensions: Width 900mm x Depth 1200mm x Height 1800mm. sample area max. 4000cm² Weight: approx. 400kg Type: Heraeus Atlas Xenotest BETA LM Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved). Further questions we can answer on the phone for you.

Condition: excellent (used), Here we offer an ICS system. Flow rate range: 0.000 to 10.000 ml/min (analysis); 0.000 to 3.000 ml/min (capillary). Flow rate accuracy: < 0.1 %. Flow rate precision: < 0.1 %. Gradient dosing accuracy and precision: ± 0.5 % at 2 ml/min (analysis only) Pressure range: 0 to 35 MPa (0 to 5,000 psi) (analysis); 0 to 41 MPa (0 to 6,000 psi) (capillary) Dimensions (H x W x D): 14 x 8.25 x 19 in. (36 x 21 x 48 cm) Weight: 55 lb. (24.1 kg) (ICS-5000) Power supply: 9 to 265 V AC, 47 to 63 Hz The system consists of the following components: ICS-5000 plus Dual Pump 6Port Valve MXP9900-000 AFC-3000 Automated Fraction Collector RFC-10 Controller Condition: used / used Hfjdpfehh Ibtox Ab Usr Scope of delivery: (See pictures as shown) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Year of construction: 2020, condition: like new (used), Here we offer a safety cabinet. The Herasafe 2030i series of biological safety cabinets leverages years of experience in global leadership in BSC design with breakthrough innovations to optimize Hfjdpoi Dn H Sefx Ab Uer contamination prevention, ease of use, and information management and delivers the most technologically advanced Class II cabinets on the market. Equipped with "smart" safety features for self-monitoring, intuitive touchscreen graphical user interface and built-in connectivity to maintain key performance to maintain critical performance data, the Herasafe 2030i delivers performance with unprecedented precision for demanding cell culture applications and other sensitive work, that require a high level of safety for product, personnel and environment. Suitable for working with BSL 1, 2 and 3 pathogens, EN1822 standards, dual DC motors, DAVe Plus, SmartFlow Plus and SmartClean Plus. Features intuitive touch screen interface, working height of 20 cm, electrically operated window, segmented worktop in sections of 30 cm and 316L stainless steel interior. Certified by TÜV Nord according to EN12469. Included option, Thermo manually adjustable base 1.5 m Dimensions (L x W x H) external: 800 x 1600 x 1536 mm Dimensions (L x W x H) inside: 627 x 1500 x 780 mm 230 V 9 A 2010 W Type: Herasafe 2030i 1.5 Condition: used / as new (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: used, Zeiss Type: EVO 50 XVP The instruments of the EVO product family combine powerful scanning electron microscopy with an intuitive operating concept that is equally well suited to experienced users and novices. Thanks to its extensive options, EVO can be precisely tailored to your requirements, regardless of whether you work in the life sciences or materials science or in routine industrial quality control and failure analysis. Scanning electron microscope EVO 50 XVP, EDX from Oxford Xplore 30 SDD detector without N cooling 05/2021 Dimensions: DxLxH 930 x 1930 x 1600 mm 30mm 2 sensor size / resolution 129MnKa at 100,000cps From boron - califonium Software AZtec lite on Windows 10 With drift correction Analyser quali-quanti-analysis Point ID Mapping Line scan Damping system included each container carries 116kg/bar Operating hours approx. 11,500 hours PC upgrade to Windows 10 05/2021 The scanning electron microscope is fully functional. Hsdpfx Abovvtnbs Ujfr Weight 750 kg + 385 kg +150 kg Condition: used (Changes and errors in the technical data, information are reserved!) Please ask about the transport options before purchasing. We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Here we offer you a be weathering tester. Atlas Xenotest Alpha LM a universal weathering instrument for testing the fastness to light and weather resistance of materials under normal, high-temperature and high-performance conditions. XENOCHROME filter XENOSENSIV gear Control the lamp power in W / m ² Sample room temperature controlled up to 70 degrees Electronics at sample level XENOSENSIV E(300-400 nm) and SST Stationary samples temperature and relative humidity sensor Humidification Irrigation Water supply with an integrated water tank Electronic version: 230V, 50/60 Hz Absorption filter 7 IR: tracking 40-140 W / m ² turn running 21 - 72 W / m ² Window glass 10 FG: tracking 40-110 W / M ² turn running 21 - 57 W / m ² Absorption filter 4 IR + 3 window glass: tracking 40-140 W / m ² turn running 21 - 72 W / m ² Hfsdpfed Dtn Uex Ab Ujr Absorption filter 6 IR + 1 UV: tracking 40-140 W / m ² turn running 21 - 72 W / m ² Rel. electrical power without XENOSENSIV sensor: continuously adjusted to the set value 53-120% Samples ambient temperature:-20-70 ° (depending on selected filters configuration) Black standard temperature: Tracking 25-130 ° C turning barrel 25-100 ° C Relative humidity: 10% - 95% Fan RPM: 500-2500 RPM Dimensions: 900 x 780 x 1800 mm Type: Xenotest Alpha LM high energy Condition: pre-owned / used Scope of delivery: (See image) The unit comes out of an operation. We may more questions like on the phone for you answered

Condition: excellent (used), Here we offer a GRIESER tripod dissolver laboratory. Product: Grieser laboratory tripod dissolver Type: GFD 11 LST Purpose: The machine is designed for mixing of powdery solids, liquids and pastes as well as to the work of fillers. The viscosity range can be from low viscosity to Pasty range. Machine design: The laboratory stand dissolver consists of machine frame, the Lifting device, the drive for mixing tool, the telescopic hood with Spring contact pressure, the Collet and the control panel (non-ex) with control and compact controller. The container (customer) and the telescopic hood form one in working position closed mixing room. The hood is intended, a hose connection It is used according to the purpose. The drive of the mixing tool with a speed adjustment is by means of Frequency converter fitted. The arrangement, performance and speed of the Motors are indicated in the enclosed drawing of the project. On the display of the compact controller can the speed of the mixing tool, the Mixing time / mixing time, mixing sequences, as well as other functions are displayed be. Operation Switching on and off is done via corresponding buttons in the control cabinet Hfedpfxod Edm Se Ab Usr Lifting of the mixing tool drive Lifting is carried out of the hub motor is switched on. This runs only as long as the Push button (2-hand safety circuit on-on) is pressed. After releasing the button

Condition: good (used), Julabo Hedsry Uifepfx Ab Usfr Type: FC 600 Technical data for FC 600 Dimensions (W × D × H) 36 x 54 x 49 cm Weight 48 kg Temperature values: Working temperature range -20 ... +80°C Temperature stability ±0.2°C Mains voltage 230V/50Hz 7 A Power values: Heating output 1.2 kW Cooling capacity 20°C 0.6 kW, 0°C 0.34 kW, -10°C 0.21 kW Refrigerant R134a Global warming potential 1430 Filling weight 290 g Pump capacity Flow rate 20 l/min Pump capacity Delivery pressure 0.5 bar Filling volume 6 to 8 l Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: good (used), Thermo Fisher ARCTIC A25 Technical data: Controller type: SC150 Capacity: 12 l Communication: RS232, RS485, Ethernet/LAN, analog I/O Cooling capacity: 500 W Flow rate: 17 l/min. Pump type: pressure pump, suction pump Temperature range: -25°C to +100°C Max. Pressure: 300 mbar Temperature stability: 0.02°C Dimensions (L x W x H) 48.3 x 27.3 x 71.1 cm Length 48.3 cm Inner length 18.4 cm Width 27.3 cm Inner width 17.3 cm Height 71.1 cm Inner depth 20.4 cm Weight: 36.1 kg Hodpfx Abory Ui Ho Ujfr Electrical requirements 230 V 50 Hz Voltage: 230 V Frequency: 50 Hz Condition: used Scope of delivery: (See pictures as shown) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: good (used), EA Electric Automatic Type: EA-EL 9080-200 EA Elektro-Automatic Electronic Load (2,4KW) 0-80V 0-200A Technical data: Mains input: Mains voltage 115V/20V switchable Hjdpfsuv Ewrex Ab Uofr Mains frequency 50/60Hz Mains fuse T2.5A DC input: Input voltage U rated 0...80V Input power P rated 0...2400W, with temperature-dependent derating Continuous power 1500W at 20°C environment Input current I rated 0...200A Overvoltage protection limit 1.1 * U rated Maximum permissible input voltage 100V Voltage regulation: Setting range 0...80V Resolution display 100mV accuracy

Condition: good (used), Horiba Type: OBS-ONE -GS02 The OBS-ONE measures the exhaust gas concentrations of CO, CO2, THC, NOx, NO2, particle measurement, exhaust gas flow rate and GPS data Exhaust gas analyzer for CO CO2 NO NOx Power supply, converts alternating current into direct current for the central unit Control unit, 24V input/output, OBD, LAN connection, connection to the other modules, connection for analog outputs Particle measurement Power supply exchange unit, changes the power source without interruption External input for 16 thermocouple sensors and 4 voltages Year of manufacture 2016 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is reserved!) Hfjdpfxouz Tucj Ab Uor We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), EA Elektro Automatik Model: EA-PS 8080-170 3U EA Elektro-Automatik EA-PS 8080-170 3U 19" Rack – Laboratory Power Supply 0-80V / 0-170A, 5000W For sale is a high-quality programmable laboratory DC power supply from the renowned manufacturer EA Elektro-Automatik GmbH & Co. KG. This is the EA-PS 8080-170 3U model with an output power of up to 5000 W. Key features: - Autoranging (flexible combination of V/A up to maximum power) - Remote sense (up to 2.5 V compensation) - Low ripple: < 10 mV RMS / < 100 mV pp - Multiple interfaces for external control: USB, RS-232, CAN, LAN (Ethernet), GPIB (IEEE488), Profibus - Analog control (0–5 V / 0–10 V) - Fan-cooled, robust industrial design Technical data: - Output voltage: 0 … 80 V DC Hsdpfx Aew S T Rlsb Usfr - Output current: 0 … 170 A - Maximum power: 5 kW - Construction: 19" rackmount, 3U - Efficiency: approx. 93% - Weight: approx. 20 kg Scope of delivery (see photo): - EA-PS 8080-170 3U power supply - Power cable (Specifications and technical details subject to change and errors!) For further questions, feel free to contact us by phone.

Condition: excellent (used), Here we offer Polychromix Phazir NIR spectrometer. Portable Near Infrared Analyzer Model: 1624 Specifications Spectral range: 1600-2400 nm. Pixel pitch 8nm Optical resolution 11nm Hjdpfxsn Arm Ts Ab Ujfr Scattered light

Condition: excellent (used), ZEISS Type: DSM 962 The digitized scanning electron microscope DSM 962 is equipped with an integrated 4 MB image memory, a 40 MB hard disk for internal image storage and drives for external storage of data and images. hard disk for internal image storage and drives for external storage of data and images. This makes it possible to quickly and easily gain insights into the composition and morphology of morphology of specimen surfaces far into the sub-micrometer range. With magnification range from 5x to 300,000x, both macrostructures and microstructures can be examined. as well as microstructures is possible. The range of applications can be extended considerably by adding special accessories, allowing, for example analytical investigations in micro areas of the surface are possible. The device can be operated both via conventional switching elements and via the keyboard or mouse (add-on). or mouse (add-on). Electron optics and vacuum control are conventional. Functions of the Image memory functions are operated using the keyboard or mouse (add-on). A separate information screen is located centrally on the separate information screen for displaying the menus. These operating instructions are intended as a guide to help the user achieve the best possible results with the device. results with the appliance. The explanations have been kept as simple as possible so that even a less experienced user less experienced users the necessary tools. Magnification range: 20x to 300,000x at 7 mm working distance Stages in a sequence of 1-2-3-5-10 Hedpfxjfcwwne Ab Ujfr Minimum magnification: 5x at 50 mm working distance Resolution: 4 nm - guaranteed with tungsten cathode at 30 kV, 6 mm working distance, untipped specimen 25 nm - guaranteed with tungsten cathode at 1kV, 6 mm working distance, untipped specimen 3.5 nm - guaranteed with optimal LaB6 cathode at 30 kV, 6 mm working distance, untilted specimen Scope of delivery: (DSM 962 with accessories as shown) Condition: used (Subject to changes and errors in technical data and specifications) Please ask about transportation options before purchasing. We will be happy to answer any further questions you may have over the phone.