Condition: good (used), machine/vehicle number: 6092, Vibronics Ultrasonic Bath Manufacturer: Vibronics Power: 1.8 kW Frequency range: 25 kHz Dksdpfxeflc Nmj Ag Rjk 4 x 150-liter ultrasonic baths 4 x ultrasonic generators 1 x filter system Overall dimensions WxDxH = 280x100x72 cm Single bath WxDxH = 50x65x46 cm 150 liters Financing through our bank is also possible. komplett-konzept.leasingo.de Find more items - new and used - in our shop! International shipping costs on request!

Year of construction: 2020, condition: new, T-Shape 3-in-1 Multi-System // Built in 2020 T-Shape combines three powerful technologies that work simultaneously to promote collagen production and significantly reduce localized fat volume and skin elasticity. It provides a deep and immediate increase in blood circulation and lymphatic drainage, which in turn improves physical fitness. - Skin tightening - Cellulite reduction - Fat deposit reduction - Circumference reduction - Post-liposuction treatment - Facelift and skin tightening RF (Radio Frequency) T-Shape generates a bipolar, quadripolar, and hexapolar radiofrequency signal. Heat is generated by the contact of RF (radiofrequency) energy with tissue impedance. When properly heated, the collagen-rich dermis is immediately denatured, the fibrils contract and thicken. In response to the initial heat, new collagen is produced, and the skin appears firmer, more compact, and younger. Dkedpfx Aerxri Sjg Rjk Vacuum Suction T-Shape features vacuum treatment technology with variable pulse modes. The vacuum lifts, folds, and compresses the skin to increase local blood circulation and stimulate lymphatic drainage. It promotes fibroblast activity and favors vasodilation. LLLT Laser Because the LLLT laser irradiates adipose tissue, it contributes to the formation of temporary micropores in fat cells and accelerates the fragmentation of triglycerides into glycerol and fatty acids, allowing them to escape from the cell, which in turn has a smaller volume. The released lipids are excreted through normal metabolic processes. LLLT effectively reduces body circumference through targeted application to the treated areas and has also been shown to reduce edema. Technical Specifications Supply voltage: 220/230 Vac 50/60 Hz Power consumption: 1300 W Weight: 45 kg Dimensions: 348 x 513 x 1008 mm Low-power laser wavelength: 760 nm Laser class: 3 R Laser density: 8 MW/cm² Bipolar radio frequency signal frequency: 1500 kHz (1.5 MHz) Maximum RF power: Less than 25 W Stimulated suction pressure: Less than 80 kPa (0.8 bar) Item condition: Used, good condition Financing through our bank is also possible. komplett-konzept.leasingo.de Find more items - new and used - in our shop! International shipping costs upon request!

Year of construction: 2013, condition: good (used), BHT INNOVA E3 Professional Bronchoscope Washer INNOVA – Professional Endoscope Washer for Practices and Small Clinics The INNOVA™ E3s is the world's best-selling BHT endoscope washer. This endoscope washer is compact and offers a high capacity for endoscopes or bronchoscopes. Depending on the reprocessing, a total of 10 to 20 endoscope reprocessings are possible daily. This makes it the perfect solution for private medical practices and small clinics that value safe hygiene, efficiency, and reliability. Reliability and maximum cleanliness in every cycle: Compliant with DIN EN ISO 15883-1/-4 and the guidelines of the Robert Koch Institute (RKI), and with many additional functions, e.g., thermal self-disinfection at 90°C according to DIN EN ISO 15883-4, 4.8.1. - Flexible in combination with another INNOVA® E2 or E3 for 30 to 40 reprocessings daily. - Suitable for both glutaraldehyde and peracetic acid from a wide range of suppliers. - Suitable for commercially available endoscopes from Fuji, Olympus, Pentax, Storz, and Wolf. - Single-channel connection or patented pressure chamber available. - Thermal reprocessing option, e.g., for multiple biopsy forceps, polyp loops, etc. - Thermal disinfection of the final rinse water as recommended by the Robert Koch Institute (RKI) for the DH version. - Secure documentation and traceability through batch control. User and endoscope identification via barcode scanner. - Data output via printer, data logger, or computer interface. Easy integration into existing IT systems Dkodpfx Asin Edweg Rsk Number of endoscopes: For 2 endoscopes or 4 ENTs Hygienic design: Hygienic workflow, single-door Channel connection system: Single-channel connection or patented pressure chamber system possible Single-channel monitoring system (CMS): No Chemistry Glutaraldehyde / Peracetic Acid: Both possible: DH version (with boiler, for glutaraldehyde) or DC (filter solution, for glutaraldehyde or peracetic acid) Documentation and integration: Yes, interface for printer/data logger as standard. Printer as standard. Optional scanner/IT interface Thermal reprocessing of instruments at 90°C: Available with additional equipment Electrical installation: 3-phase 400 V / 50 Hz AC+N+PE. Connected load: 11 kW. Fuse rating: 3 x 20 A Year of manufacture: January 19, 2013 Item condition: used Financing through our bank is also possible. komplett-konzept.leasingo.de Find more items - new and used - in our shop! International shipping costs on request!

Condition: excellent (used), Mathis THN 10988 Laboratory Thermosol System Application This padder-dryer combination has proven itself extremely effective in practice. It is used in this form for a wide variety of hot air treatment processes, such as drying, setting, condensing, thermosolizing, etc. This system is used wherever a certain sample size is required, for example, to produce sample collections or similar. THA Dryer If the padder and dryer are to be used separately in addition to continuous operation, the THA dryer should be selected. This unit is equipped with an unwinder at the dryer inlet and an extractor at its outlet. This element determines the fabric speed when operated separately. This offers the advantage of using the padder and dryer independently and simultaneously. The fabric is then transferred to the dryer for drying, setting, condensing, etc. If all of the above-mentioned applications are to be ensured and if the use of pin frames is also desired for stand-alone operation of the dryer, the THN model is preferable. The standard pin frames are suitable for a sample size of max. 50 x 50 cm (larger pin frames available upon request). Lengthwise adjustable frames for woven fabrics or lengthwise and widthwise adjustable material holders for warp-knitted and knitted fabrics, nonwovens, etc., as well as clamp frames for foils and paper, are available. Drying Chamber The drying chamber, including the electrical equipment box and control panel, are mounted on a base frame and bolted together to form a single unit. Good thermal insulation of the dryer is ensured by its double-walled construction with insulation between them. The nozzle array, with a length of 1300 mm, is divided into an upper and lower nozzle compartment. A control flap allows for equal ventilation from top and bottom, or more air from top or bottom. Fan and Heater Intense air circulation is ensured by a powerful fan with a capacity of approximately 900-3500 m³/h, combined with a well-tuned heating output, resulting in optimal evaporation performance. A dual-protection monitoring system reduces maintenance and increases the operational reliability of the dryer. The heating capacity is designed for rapid heating and is automatically reduced once the desired temperature is reached to avoid unnecessary power surges. The temperature is controlled by an electronic measuring and control device in the range of 20-250°C. Dkjdpju D Ariofx Ag Rsk The fresh air is drawn directly into the recirculation fan via a fan. The desired flow rate can be adjusted using a step switch. Technical Specifications Air velocity approx. 4-12 m/sec Air flow approx. 900-3500 m3/h Temperature range up to 250°C Heating output approx. 27 kW Nozzle area 1300 mm Fabric tension continuously adjustable Fresh air supply adjustable to multiple levels Dimensions: LxWxH = 4800 x 1380 x 1750 mm Purchase price: €86,275 Financing through our bank is also possible. komplett-konzept.leasingo.de Other items in other sizes – new and used – can be found in our shop! International shipping costs upon request!

Condition: good (used), Roche MagNA Pure LC Nucleic Acid Preparation Station Description of the manufacturer, all data without guarantee. Dodpfx Agoh Dpxhs Rekk Services Save time with fast, fully automated isolation of high-quality DNA, RNA and mRNA. Get reliable, reproducible results. Benefit from high flexibility in sample type and volume as well as elution volume and post-elution processes. Benefit from software-assisted set-up of reagents and disposables. Automated pipetting of PCRs into LightCycler ® capillaries (LightCycler ® sample carousels ), LightCycler ® 480 multi-well plates (96-well), PCR plates or strips or tubes. Product description The MagNA Pure LC instrument is a benchtop instrument for rapid, cross-contamination-free nucleic acid preparation and PCR setup. A fully enclosed housing, automatic clot and tip loss detection and sample tracking make the MagNA Pure LC instrument a true "walk-away" instrument. Filtration, centrifugation and other manual steps are completely eliminated. No vacuum pumps or tubing are required. With the piston-driven 8-channel nozzle head and liquid handling with direct displacement, the risk of cross-contamination is reduced to an absolute minimum. The UV decontamination and HEPA filter system ensure maximum safety for samples and the environment.  Item condition: used untested Scope of delivery as shown Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - can be found in our shop! International shipping costs on request!

Condition: used, This listing is for the Millipore Elix Advantage 15 Water Purification System Dkedsx Tuctjpfx Ag Rsk The unit is in full working condition and is ready for immediate use The Elix Advantage 15 is a laboratory water purification system designed to generate Type II pure water directly from potable tap water using an advanced combination of purification technologies. It’s part of Millipore’s Elix series, which emphasizes reliable, continuous production with minimized maintenance needs.

Condition: used, This listing is for the Grant Bath QBT1 The unit is in full working condition and is ready for immediate release The Grant QBT1 is a digital dry block heater designed for laboratory use. It’s a compact heating unit used to incubate, heat or maintain samples at precise controlled temperatures without water. This type of equipment is common in molecular biology, biochemistry, and general wet lab workflows for tasks like enzyme reactions, incubations, or sample preparation The QBT1 dry block heater is used for: Incubation of samples at controlled temperatures Enzyme reactions and denaturation/activation steps Dsdpfx Asx Trc Dsg Rekk Sample pre-heating before assays Maintaining temperature during experimental protocols

Condition: excellent (used), functionality: fully functional, For sale is a Zeiss field emission scanning electron microscope type 40 VP with Gemini optics The system is sold complete with computer, software and cooling system Technical data Djdpfx Agsvb Hwys Rjkk Windows interface: XP Professional System: Oxford AZtec from 2017 Carl Zeiss Supra 40VP Gemini optics Panasonic CCTV Camera WV-BP332EE EDWARDS Oil-free dry-running scroll pump EDX detector STEM detector Maximum resolution: 1 nm Magnification range: 12x - 900,000x Acceleration voltage: max. 30 kV Software: SmartSEM Zeiss offers support for this device up to and including October 2025 On request, transportation and loading can be organized for an additional charge. can be organized throughout Europe. Prices plus VAT Viewing possible by appointment. Please contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale BUYING / SELLING PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: good (used), YSI 2700S SELECT Biochemistry Analyzer, Biochemical Analyzer Item condition: Used R12C3_EK Dksdpsiu U Acefx Ag Rek More analyzers - new and used - you will find in our store! International shipping costs on request!

Year of construction: 2013, condition: excellent (used), Ecat ovo compact EG10 In-ovary vaccination Pressure injection system Embryo injection system; Ecat ovo compact EG10 In-ovo vaccination system For modern hatcheries, the Egginject® Compact provides safe in ovo vaccination thanks to its dual-pressure injection systems. The Egginject Dual Pressure Injection System is a patented technology that allows customization of the injection depth to each embryo, regardless of size or age. Compact Egginect allows vaccination in small and medium sized hatcheries - Adaptable to all types of incubation dishes - Reliable and solid design for heavy duty - Easy to use: simple and friendly. - Stand Alone or fully integrable in the Hatchery Automation Line. Year of construction: 2013 Item condition: used Financing through our bank is also possible. Dkodedx Axljpfx Ag Rek komplett-konzept.leasingo.de

Condition: good (used), SIEMENS BCS Coagulation Analyser Djdpfjh Dpxpex Ag Rjkk The fully automated Siemens BCS haemostasis system supports the user in performing efficient coagulation diagnostics. Due to the extensive parameter spectrum and the high throughput capacity, the system can be used in a wide range of applications. Thus, the BCS can be used as a high-throughput analyser as well as a special analyser. Item condition: used untested Scope of delivery as shown Further articles - new and used - can be found in our shop! International shipping costs on request!

Condition: good (used), Heraeus Minifuge RF Analogue temperature setting: -40 to 30°C Speed 0 to 6000 rpm, analogue adjustable Timer 0 to 60 min or continuous Rotor Sepatech 3360 for 4 inserts, max. speed 6000 rpm Brake function Automatic unbalance cut-off Automatic lid lock during use Dsdpfshty D Rsx Ag Rjkk Dimensions: approx. 68 x 67 x 56 cm (W x H x D) Weight: 70 kg Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: excellent (used), Nuaire NU-440-600E fume cupboard The Nuaire 440-600 is ergonomically designed for user comfort and offers users more knee room. The Nuaire 440-600 has a unique sealed construction and True Laminar AirFlow HEPA filtration system. The 440-600 biosafety cabinet features the advanced AirFlow Control electronic system with precise programmable controls for a safe, reliable environment. Specifications: Voltage: 230V, 50Hz Dkjdsirtxbjpfx Ag Rek Current: 11A Downflow 38 M/S Inflow: 46 M/S Included: -2x 230 volt socket -fluorescent lamps Outside dimensions (W) x (D) x (H): 200 x 85 x 150cm Item condition: used More items - new and used - you will find in our store! International shipping costs on request!

Condition: good (used), Sanyo MPR-311D (H) medicine refrigerator 340l Safe, safe, cool storage of valuable medical products Efficient temperature control A thermistor sensor and an electronic temperature control system ensure that the setpoint temperature is maintained. Even if the door is opened and closed from time to time, the fans ensure rapid temperature equalization, Dkedpfsvi H U Usx Ag Rjk to ensure highly reliable and stable storage conditions, which are unaffected by the outside temperature. Equipped with digital temperature display A clear digital temperature display enables a quick visual check of the current operating temperature. To simplify visual temperature control, the temperature is displayed in 1°C increments for a temperature range from 0°C to +15°C. Fan forced air circulation Thanks to the fan forced air circulation system, the temperature is evenly distributed throughout the chamber. Every corner of the appliance is cooled immediately, apart from insignificant temperature deviations. Automatic defrosting system During normal operation, the automatic defrosting system switches on from time to time time without the chamber temperature rising. Over or under temperature alarm and safety devices If the chamber temperature suddenly drops below 0°C or rises above 15°C, the buzzer sounds. At the same time, the digital display flashes. If the chamber temperature falls below -2°C or rises above 20°C, the safety device prevents the refrigerator contents from freezing or freezing by activating the visual and audible alarm, that the contents of the refrigerator freeze or that the temperature continues to rise abnormally. Hard PU foam insulation keeps the chamber temperature stable and effectively protects against the penetration of warm air into the chamber interior. the inside of the chamber. The inner chamber is made of chemically resistant stainless steel and will provide many years of reliable service. With 2 easy-to-open sliding doors, less floor space is required. Temperature: +2/+15C Volume: 340 ltr. Dimensions: WxDxH 1800 x 800 x 470 mm Glass doors Interior: Stainless steel 220 Volt 158 watts You can find more items - new and used - in our store! International shipping costs on request!

Year of construction: 2001, condition: excellent (used), BDK S-1200 Laminar-Flow Safety Cabinet Operating principle The safety cabinet is a laboratory unit in which a largely low-turbulence (laminar) displacement flow prevails in the working chamber. The air flowing through the working chamber, as well as the exhaust air, is cleaned by a high-performance HEPA filter. Scope of performance and equipment - Model design The safety cabinet is manufactured in three different sizes, as BDK-S 1200, 1500 and 1800. Djdpel Smggsfx Ag Rokk - Air monitoring The air flow velocity in the recirculation (downflow work area) and exhaust (inflow exhaust air) areas is monitored with flow probes. Any faults that occur are indicated by a control lamp and signal horn. - Inspection pane monitoring The viewing pane made of laminated safety glass is equipped with a weight compensation and can be moved manually very smoothly and steplessly. If the viewing window is not in the working position (opening greater than 190 mm), this is indicated on the display and by a signal horn. - Control panel All switching elements required for operation, membrane keypad, signal horn and indicator lights, as well as the display for indicating the various operating states are arranged in the control panel. - Microprocessor control The microprocessor control is self-monitoring and permanently displays the airflow speed. - Unit depth< 800 mm (840 mm) Due to the low unit depth, the safety cabinet fits through all common laboratory doors. - Housing design For safety reasons, the housing is made of 1.5 mm thick Zincor sheet metal with welded pressure area. - Contamination areas All contamination areas are flushed with negative pressure. - low sound emissions - glare-free work area illumination - joint-free working area made of stainless steel Manufacturer: BDK Model: S-1200 Type: Laminar-Flow safety workbench Year of manufacture: 2001 new price: 6.500 € Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - you will find in our store! International shipping costs on request!

Condition: used, The BV tests are intended for the detection of biological agents, including botulinum neurotoxins A, B, E and F, staphylococcal enterotoxin A and B, ricin and anthrax spores. BV tests use a sandwich immunoassay format. One antibody, specific for the pathogen to be measured, is immobilized on microparticles. The other antibody is labeled with the BioVeris BV-TAGTM label. The sample is mixed with these reagents. If the specific pathogen to be measured is present in the sample, both antibodies bind to it, effectively linking the microparticles, the organism and the BV-TAG label. The reaction mixture is then transported with an assay buffer to a flow cell with an electrode that stimulates the bound BV-TAG label to emit light. Dedpfx Agsu Egxvs Rskk Only BV tests offer this unparalleled sensitivity and accuracy. BioVeris M1M Analyzer Incl. Toughbook Panasonic Mod. CF-29HTP44BM Plastic transport case (LxWxH)480x375x350 mm

Condition: good (used), Sartorius Stedim biotech BioWelder 16370 The BioWelder uses a thermal welding cycle that does not require laminar flow. With this welding method, the blade is kept sterile and endotoxin-free throughout the process. The inserted tubes are cut with a knife and then fused together by the device. The cycle process is fully automated and is only released after a complete cycle. Various programmable holders allow thermoplastic tubing of the same type (e.g., C-Flex, Sanipure, Pharmed) with diameters from 1/4" (6.4 mm) to 3/4" (19.0 mm) to be fused together. Features: Fully automatic operation Welds thermoplastic tubing up to 3/4" outside diameter Preloaded settings for C-Flex, Raumedic FluiSoftTM, AdvantaPure, AdvantaFlex, Pharmed, and Sanipure tubing True Thermal Weld provides exceptional strength Aseptic connection without laminar flow hood Data output through a printer Compact design, portable Easy to validate, with validation equipment Can weld many different tube diameters Includes: Tube holder SH1 5/8″ 15.9 mm outer diameter inserts (1 set). Manufacturer Specifications: Housing: stainless steel Interface: RS232 for printer Blade: Cr-Ni alloy, single use. Ambient temperature 20°C-30°C (ideal: 22°C). Relative humidity: 20%-80% (ideal: 60%) Temperature sensor: type K, calibration Djdpfxekq Ay Ie Ag Rekk max. pipe OD: 3/4" minimum. Tube OD: 1/4" Welding cycle: 60-90 sec. depending on pipe dimension You can find more biofields - new and used - in our store! International shipping costs on request!

Condition: good (used), Smicon AFT 2/1500 Fumigation / Fumigation System In a fumigation, a room is flooded with a poisonous gas to fight pests / bacteria. Because they are toxic gases, special safety measures are required. Fumigations are common in the storage of organic materials (eg grain storage, in warehouses of harbors, silos, mills), in addition, in churches to control the woodworm. It is a device which is used for the disinfection of rooms. Formaldehyde is boiled on the left-hand cooking plate and placed in a stream of air in a room together with condensed water (right hearth), killing all the bacteria. Former list price 10,900 € net Dkodedviynspfx Ag Rsk More articles - new and used - can be found in our shop! International shipping costs on request!

Year of construction: 2003, condition: good (used), Smicon PT 1500 fumigation Fumigation system Fumigation machine Disinfection machine; Smicon PT 1500 fumigation / fumigation system During fumigation, a room is flooded with a toxic gas to combat pests/bacteria. As these are toxic gases, special safety measures are required. Fumigation is commonly used in the storage of organic materials (e.g. grain storage, in harbor warehouses, silos, mills) and also in churches to combat woodworm. Dkedpeu Ny Ncofx Ag Rjk It is a device that is used to disinfect rooms. Formaldehyde is boiled on the left hotplate and placed together with condensed water (right hotplate) in an air stream in a room and kills all bacteria there. Former list price € 9,900 Item condition: used

Condition: good (used), machine/vehicle number: 50-14-05-3-23, We offer the following for sale here: Item number: 12878 Prince Technologies PrinCe 560 Capillary Zone Electrophoresis System Connections: Mains, HV control, parallel port A, parallel port B, Psxh8M Series port A (RS232), Series port B (RS232). Technical data: Injection method: up to 650 min, in 0.01 min steps; Hydrodynamics: 180 - 250 m bar, in 1 mbar steps, electrokinetics; -30 to + 30 kV, current and/or voltage Flow/pressure range: 0 to +3000 mbar from DCI device. Volt range: 30 kV to +30 kV Current range: -200uA to +200uA Rise: Programmable volt or amp rise Polarity reversal: Programmable before and during the sample run. Autosampler: Position carousel for 30/48 sample and buffer vials. Variable vial size, including Eppendorf micro centrifuge tubes. Buffer volume: Max. 4 ml Sample volume: Min 10ul, max 4 ml. Temperature control: sample and buffer 4 C to 40 C. Lapillary output: 5 C to below 60 C Dkedpju Eb D Hjfx Ag Rek Detector: Allows the use of: UV/Vis, fluorescence, diode array, LIF, conductivity, electrochemical and MS. Year 2004 Model PrinCe 560 0500.022/CR S/N: 50-14-05-3-23 Dimensions:50x50x54 cm Weight: 35 kg without function test

Condition: excellent (used), Safetech ST-Alarm-V2 Safety Weighing Cabinet The latest generation of safety weighing cabinets, the ST1 series, is characterized design, especially with regard to personal protection for work with toxic and active work with toxic and active substances. All cabins are equipped with an alarm system and two alarm sensors. The sensors measure the flow velocity on the right and left side of the work opening. As soon as the flow velocity falls below a limit value, both an acoustic and a visual alarm are triggered. Key benefits at a glance: Unique directional airflow guidance through BAFFLE technology. (patent pending) Virtually turbulence-free balance environment Suitable for the latest generation of microbalances Cabinet design also allows pipette handling Alarm system with two sensors and data logging Vibration-free due to independent filter unit Easy to clean due to removable back panel Without filtration components Dedpfx Ageiuxndj Rokk Further safety weighing cabinets - new and used - you will find in our store! International shipping costs on request!

Condition: good (used), Abbott Cell-Dyn 3700 Hematology Analyser Dkjdpfxeh Dpyxj Ag Rjk The Abbott CELL-DYN 3700 system is an automated multi-parameter hematology analyser designed for in vitro diagnostics in clinical laboratories. The CELL-DYN 3700 analyser , designed with its analyser as the central unit, aspirates and dilutes whole blood samples, transports and analyses the prepared dilutions and rinses liquid components in preparation for the next sample. The haematology analyser produces haematology measurements on EDTA-anticoagulated whole blood, including WBC, NEU, LYM, MONO, EOS, BASO, RBC and HGB. Item condition: used Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: good (used), KEN 2311 Laboratory washer-disinfector KEN 2311 is a compact washer-disinfector. It is used for washing, disinfecting and drying (option) surgical instruments, rigid endoscopes, instruments for minor invasive procedures, anesthesiology, abdominal and tubular equipment, anesthesia and ventilation tubes, surgical shoes, as well as bottles, trays, glassware. ■ User-friendly control panel - ensures correct operation. ■ Possibility of individual program selection. 4 programs as standard ■ Process indicator bar shows how far the program has progressed. ■ Double monitoring of temperature (EN/ISO 15883). ■ Possibility to connect 2 types of chemicals ■ Lockable lower compartment for storage of chemicals. Specifications Mains connection 3 x 400 V,N,J, 50Hz Connected load/fuse 10kW/16A Water connection Cold untreated water: 1 piece, ¾" RG, 5-30°C, 0-30°dH Water connection Hot soft water: 1 piece, ¾" RG, 30-70°C, 0-3°dH Water pressure 200-800 kPa Outlet valve Ø 50 Water quantity (approx.) per withdrawal 13-14 l Pump capacity 370 l/min Free depth 2 doors 560 mm Free depth without center plane 510 mm Free width without center plane 510 mm Noise level approx. 59-64 dBa (sound pressure) Tightness class IP 21 (not suitable for dishwasher) Dodpfx Asiuzlvog Rokk Height: 1740 mm Width: 600 mm Depth: 601 mm Condition: This unit was removed in working condition due to a site closure and has been stored since. It appears to be in very good condition. Unfortunately, we do not have the knowledge or instruments to test the unit further and Therefore, this unit is being sold as it is pictured here. If you would like to test or inspect this unit prior to purchase, please contact us anytime to schedule an appointment. Financing through our bank is also possible. komplett-konzept.leasingo.de You can find more items - new and used - in our store! International shipping costs on request!

Year of construction: 2000, condition: good (used), Becton Dickinson FACSCalibur Flow Cytometer The BD FACSCalibur™ platform offers a unique modular approach to flow cytometry, allowing users to perform both cell analysis and cell sorting in an innovative single-table system. Designed with multi-colour applications in mind, the BD FACSCalibur flow cytometer offers flexibility to support a wide range of research and clinical applications.33 nm), which allows analysis of up to 6 parameters (forward scatter and side scatter and up to 4 fluorescent dyes).  Year of manufacture 2000 Item condition: used No voltage transformer & power supply available - therefore without functional test.   Financing through our bank is also possible. komplett-konzept.leasingo.de Dedpfxshtu Iye Ag Rokk Further items - new and used - you will find in our shop! International shipping costs on request!

Condition: used, This listing is for the Grant QBT1 Heat Block The unit is in full working condition and is ready for immediate release Dedpfxsx S H D Hj Ag Rokk The Grant Model QBT1 Dry Block Heater With 24x10.5mm Well Block is a compact dry block heater designed for laboratory temperature-controlled heating of small sample tubes. It’s part of Grant Instruments’ dry block heater family, used widely in molecular biology, biochemistry and general lab work for consistent incubations or reactions in tubes A dry bath / heat block heater that provides precise, stable heating for tubes (especially 1.5 mL Eppendorf-style tubes), without using water or oil baths. The heat is delivered through a removable aluminium block tuned to fit a specific tube format — in this case typically 24×1.5 mL tubes