Used mounting technology for sale (158)

Condition: used, Year of construction: 2007, 2007 Felsomat Gantry Robot Loading Unit with Siemens PLC Bedpfx As Ahg Spsdhjlp Rail Length 1,500mm Upright Height 2,300mm. With Transfer Unit. S/No. 206200 (2007).

Year of construction: 2014, operating hours: 3,100 h, condition: excellent (used), functionality: limited functionality, MYDATA MY500JP Jet Printer 2014 in excellent condition with exceptionally low operating hours (approximately 3,100). Kept and used in a clean environment. Complete system supplied with offline programming PC, MYCAM JP software, 2D Inspection & Repair option, SMT Adhesive option, manual load tables and associated documentation. There are also some spares included which we can bundle into a sale deal for an appropriate price. Visits/Inspection are welcome by appointment. An excellent opportunity to acquire a MY500JP suitable for high-mix, low-to-medium volume SMT production. The machine exhibits an intermittent issue affecting movement on the X-axis during camera positioning. On occasion, a slight jitter or vibration is observed, which can prevent the vision system from reliably locating the PCB fiducial during initial board loading or machine initialisation. The fault is intermittent and does not occur consistently. Most of the time, reloading the PCB allows operation to continue normally. Occasionally, a machine restart is required. The root cause has not been determined, but the issue appears to be associated with the X-axis motion control system. Potential areas for investigation include the servo amplifier (drive), encoder, encoder cable or other associated motion control components. Despite this intermittent behaviour, the machine was used in active production of complex PCB assemblies, including fine-pitch BGA boards, for approximately 12 months prior to being replaced as part of an equipment upgrade. The machine is therefore offered for sale on the understanding that diagnosis and repair of this intermittent fault is outstanding. Included: MYDATA MY500JP (2014) Approx. 3,100 operating hours MYCAM JP offline programming PC and software 2D Inspection and Repair option SMT Adhesive option Bljdpfxezlx E Te Adhjp Manual loading Technical documentation 4pcs AE04 ejectors Bundle of spare parts Not included: Solder paste Cassette (Holding Assembly), Solder paste, Purge Gel, Filter boxes Conveyors

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2020, Machine in great condition! Available Q1-Q2 2027 Bedpfe Ahw I Uox Adholp

Year of construction: 2014, operating hours: 4,000 h, condition: used, Operational machine with low hours! Bjdpfx Adey R Dc Dehelp Ask for additional information!

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, ASM -DEK- NeoHorizon 01 iX stencil printer. Quantity: 2 units. The machines are equipped with the HawkEye 750 camera and feature the DEK Cyclone vacuum system. Otherwise, they are in very good condition and available immediately. Inspection possible by appointment. Bedpfx Adj Agniqshjlp We will gladly answer any questions you may have about these DEK machines.

Condition: used, Year of construction: 2018, Technical specifications Bareboard loader with buffer function Manufacturer: ASYS Model: LLB 01 Year of manufacture: 2018 Bledo Agf Efopfx Adhep PCB dimensions: min. 70x80mm - max. 250x330mm PCB thickness: 0.8 - 4.0mm Buffer capacity: 5 PCBs Automatic width adjustment Separately driven conveyor belts SMEMA interface Complete documentation Condition: Used, functional

Condition: good (used), Year of construction: 2015, • Manufacturer: ASYS Automatisierungssysteme GmbH Bledpfx Ao Agfunsdhjp • Model: VEGO AMS 03D (End of Line Station) • Year of manufacture: 2015 • Magazine loader for three magazines • Interface: SMEMA • Transport height: 950 mm ± 50 mm (standard) • Automatic width adjustment • Connection power: 230 V / 50 Hz / 0.5 kW • Compressed air connection: 6 bar • Dimensions (approx.): 1,100 mm x 1,470 mm x 1,120 mm (L x W x H) • Weight: approx. 400 kg

Condition: used, functionality: fully functional, Year of construction: 2017, Operational condition 3D AOI machine. Bedew Ty Hcjpfx Adhjlp Ask for specification!

Condition: used, functionality: fully functional, Year of construction: 2010, total length: 3,590 mm, total width: 1,432 mm, total height: 1,478 mm, overall weight: 870 kg, We offer this ready-to-use Rehm VXS basic 2100 (Type 422) reflow oven for SMT/re-flow soldering, manufactured in 2010. Blsdpfjz Hnz Rox Adhep - Manufactured in 02/2010, put into operation on April 16, 2010 - Special shortened version, 7 zones: 4x preheating, 2x PEAK, 1x cooling - Operated in a single-shift mode from 04/2010 to 07/2021 (approx. 11 years), has been out of operation since then - Regularly serviced and cleaned; only one service intervention during the entire operating period (repair of the transport trolley, 06/2016) - Dimensions: 3,590 × 1,432 × 1,478 mm (L × W × H, ±50 mm) - Purchased as new directly from Rehm (original purchase price approx. 1.43 million CZK) - Data sheet and operating records available for viewing/download - Inspection and collection: Bonnel Technologie s.r.o., Wolkerova 2304/38, Cheb, Czech Republic (near the Bavarian border) If you have any questions or require further information, please feel free to send us a message or contact us by phone.

Condition: good (used), Year of construction: 2015, • ASYS INSIGNUM 2000 CO₂ laser with integrated rotating station • Year of manufacture: 2015 • Max. marking area: 350 x 350 mm (without axis movement) • Printed circuit board formats: Min. 70 x 50 mm to Max. 460 x 460 mm • Board thickness: 0.8 mm to 3.0 mm (Permissible weight up to 2/3 kg) • Camera system: Integrated camera • Connection power: 230 V / 50 Hz / approx. 0.7 kW • Compressed air supply: 6 bar • Dimensions (approx.): 701 mm x 1,548 mm x 1,522 mm (LxWxH) Blode Agfwqjpfx Adhsp • Incl. extraction system

Condition: excellent (used), functionality: fully functional, Year of construction: 2014, Rehm vacuum vapor phase soldering system Year of manufacture: 04/2014 Service recently performed by Rehm in October 2026 Vacuum package Bljdpfx Aoz Tdi Sjdhep Manual loading and unloading of the process chamber in the operator area Air cooling directly above the assembly in the cooling area 1 basic work piece carrier, 650x650mm Automatic Galden filling system (25 kg HS 240) Water-cooled cooling section Camera for process monitoring

Condition: excellent (used), Year of construction: 2011, We are offering for sale our Viscom AOI S3088 - III in very good condition. - Manufacturer: Viscom SE, Hanover - Type: S3088-III - Inventory No.: ZZ052495 - Year of manufacture: 03/2011 - Serial number: 101159 Bledpfxezv S Dws Adhop - Camera configuration: 8M (4x orthogonal, 4x angled) - Software version: 9.40 (4) - Licenses: OCR and DMC - Last calibration: May 2025 - Operating system: Windows 7 Professional (Service Pack 1) - Processor: Intel Core i7-3770 CPU / 3.40 GHz - RAM: 16 GB - UPS functional The system has been inspected by our technician and found to be in very good condition. We will gladly provide you with a demonstration video of the system, or we look forward to your visit.

Condition: used, Year of construction: 2012, Software version: 717 R23-1, mains voltage: 3x400V, rated current: 7.5A per phase, fuse protection: 3x16A, compressed air supply: 5-10bar, compressed air consumption: 600Nl/min, operation: SIPLACE user interface with monitor, connected load: 2.5kW, length: 1500mm, width: 2475mm, height: 2030mm, weight: 2.31t, without setup tables and component feeders, with CE marking. An on-site inspection is possible. Bodpj Agn Riofx Adholp

Year of construction: 2008, condition: defective spare-parts repository (used), functionality: unexamined, power: 5 kW (6.80 HP), number of previous owners: 1, noise level: 69 dB, machine/vehicle number: 070523, Current operating hours of the tube: unknown Maximum PCB width: 450 mm x 400 mm Inline X-ray imaging + AOI History from the previous owner is available We acquired the machine as "functional," but it was likely used as a source of spare parts by the previous owner. Therefore, it cannot be guaranteed that all components are present. We have never put the machine into operation and cannot provide any information about its condition during operation. You are welcome to inspect the machine in 72108 Rottenburg and form your own opinion. Bodpfxjzhwvpe Adhjlp Since we are selling the machine as defective/in need of repair, the goods are sold with the exclusion of any warranty and any liability for defects.

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, machine/vehicle number: 125102018, Manufacturer: TMA Automation sp. z o.o., Year of production: 2018 SET DESCRIPTION For sale is a complete set of two cooperating Cartesian robots manufactured by the Polish company TMA Automation, designed for use with injection molding machines. The set consists of a MIDI LINE linear robot and a UNI LINE in-mold labeling (IML) module. The robots were used in a production facility and are in a condition confirmed by technical documentation. The sale includes complete documentation. TECHNICAL DATA MIDI LINE robot (serial number: 125102018) Dimensions (L x W x H) 2400 x 2060 x 1435 mm (variable height), Weight 600 kg, Payload 8 kg, Z-axis reach 2300 mm, Y-axis reach 1400 mm, X-axis reach 1400 mm, Supply voltage 400 V / 50 Hz, Power 4.5 kW, Operating air pressure 6.5 bar Bjdpfx Adezwdx Nshslp UNI LINE robot with IML module (serial number: 126102018) Dimensions (L x W x H) 2540 x 1000 (1370) x 2090 mm, Weight 550 kg, Payload 8 kg, Stacker reach 1100 mm, Supply voltage 400 V / 50 Hz, Power 1.5 kW, Operating air pressure 6.5 bar EQUIPMENT INCLUDED Touchscreen control panel with a safety STOP button (e-stop), control software with the following functions: automatic mode, manual mode, no-label mode, no-part removal mode, program archive, graph and alarm module; complete technical documentation, CE marking on both machines. TECHNICAL CONDITION Robots from 2018, operated in industrial conditions (plastics injection molding). Control panel active; at the time of the photographs, program PRG 2 was selected, operating speeds: manual 22%, automatic 17%. The photographs show a red robot stop signal (standby condition, not an emergency). Recommended before purchase: personal inspection and test run at the installation site. SALES CONDITIONS Sold only as a set. Self-collection only. Transportation is the buyer's responsibility.

Condition: used, Year of construction: 2004, functionality: unexamined, machine/vehicle number: 14-250 001, workpiece diameter (max.): 80 mm, Title: Bledoz Eh Unepfx Adhop Short Bar Loading Magazine FMB SL 80 S – Year of Manufacture 2004 – including accessories & forklift loading Description: Due to a change in our production processes, we are selling our FMB SL 80 S short bar loading magazine. The machine has operated reliably in our production up until now and is no longer needed due to the changeover. •Manufacturer: FMB •Model: SL 80 S •Year of Manufacture: 2004 •Bar Diameter: 10 – 80 mm •Condition: Used Scope of Supply & Accessories: •Connection cable to the lathe (interface) is directly attached to the machine. •4 different sliding bars / feed bars for different material diameters are included. Loading & Logistics: •A forklift is available on site. •We will assist with loading onto your truck or the shipping company’s vehicle free of charge. Terms of Sale: The sale is exclusively to commercial customers (B2B) and is subject to the exclusion of any warranty and liability for defects. A proper invoice with VAT will be issued.

Condition: used, Year of construction: 2008, Control system: Beckhoff, operation: touchscreen. Equipment: extraction system, milling and sawing separation, shuttle/loading system, enclosed machining area, safety enclosure with viewing windows, emergency stop switch, start/stop push buttons, three-color signal tower, pneumatic air preparation unit, Ruwac industrial vacuum cleaner. The system is operational and was shut down at the beginning of the year. Inspection possible by arrangement. Bljdpfxs Ahi Tvo Adhep

Condition: good (used), Specification ASSCON Quicky 450 Type Batch vapor-phase soldering machine Maximum PCB/workpiece size 450 × 450 mm Maximum component height 50 mm Soldering temperature 100–260 °C Supply voltage 230 V / 50 Hz Bledpfxe Afy Eqs Adhsp Connected power 3.5 kW Average power consumption at full load 1.5 kW Medium filling (Galden) 2 kg Standard cycle time approx. 6 minutes Dimensions (w × d × h) 600 × 635 × 1,135 mm Weight approx. 180 kg

Condition: good (used), functionality: fully functional, Year of construction: 2020, Asys VL01 Lifting Station Bledpfjz Ib Tcsx Adhjp Year of manufacture: 2020 Complete documentation

Year of construction: 2006, condition: good (used), For sale are 3 Siemens component placement machines, consisting of: 1 unit X 2 (year of manufacture 2006), model B 348 = €10,900 + VAT 1 unit X 2 (year of manufacture 2006), model B 251 = €10,900 + VAT Both machines have been inspected and tested for full functionality in our workshop. All machines have a valid maintenance report. An on-site inspection is possible and desired. Please refer to the photos for the technical data and configuration of the respective machines. We will also be happy to answer any questions you may have about the machines in person. Upon request, a reference run video is available for each machine. We can also carry out modifications for your specific application for an additional charge. Blsdpfoyrm E Asx Adhjp The machines are sold without component tables or MTC. Location of the machines: Zollner Elektronik AG / Warehouse Roding / Buchenstraße 18 - 20 / 93426 Roding

Year of construction: 2017, condition: excellent (used), functionality: fully functional, STANDARD FEATURES - REJECT CONVEYOR • Reject, inspect, and by-pass modes selectable. • Conveyor width adjustment using a hand crank. • Controlled by a PLC. • CE certified. OPTIONS • Non-standard conveyor/segment lengths • Electrical conveyor width adjustment. • Automatic conveyor width adjustment • Additional lift positions for extra buffer capacity • Inspection interval counter • Light fixture • Alarm buzzer. • Other options available upon request SPECIFICATION Transfer height 950 mm ± 25 mm* Colour RAL 9002* Flow direction Left to right* Fixed rail Front* Machine interface SMEMA* Conveyor concept ESD belt Belt speed Variable 2-14 m/min. PCB edge support 3 mm Bodpszy N Rpsfx Adhslp Component clearance Bottom 30 mm, top + bottom = 65 mm max. (belt to belt) Power supply 230 VAC/50 Hz/1 Ph Power consumption 150 VA max. Air supply 4-6 bar Air consumption 10 ltr/min max. Machine L x W x H (mm) 1000 x 875 x 980 Weight (Kg) 95 PCB Length (mm) 80 - 460* PCB Width (mm) 50 - 460* Fixed rail to front (A) (mm) 186

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, For sale is an automation cell from the brand EROWA, type Robot Dynamic 150 Linear (ERD 150L), including the process control system JMS 4.0 MoldLine. With the exception of the gantry eroding machine, all production and measuring machines have already been sold. Only the EROWA automation is offered; the Gantry Eagle 500 can be offered separately. The system was put into operation in mid-2020 and is in very good and well-maintained condition. Technical data: Bedjz Szh Njpfx Adhjlp Year of construction: 2020 Control / control system: JMS 4.0 MoldLine from Certa Systems Magazine capacity (total): - 20 pallet spaces for PARTOOL clamping system - 360 spaces for EROWA ITS 50 Turret rotation radius: -30° to +300° Transfer weight max.: 150 kg Identification system: EWIS 10 (ID chips) Loading station: Yes, with rotary table Safety enclosure: Yes, according to layout Acceptance: Complete CE acceptance Included in the offer: 3 gripper arms and grippers with RCS coupling, as well as RCS gripper S, support gripper for ITS 50, collection tray on the rotary turret, gripper station (Gripper Dock), software license for Robot Dynamic 150 L, machine interface box including interfaces, loading station, enclosure including all elements and doors, CMM - light curtain system. Note regarding tooling & coaching: The chucks, adapter pallets, vices, Partool tooling, and EROWA ITS holders are NOT included. Coaching by EROWA Automation is not included in the scope of delivery. Upon request, transport and loading can be organized throughout Europe for an additional charge. Prices do not include VAT. Inspection is possible by appointment. Contact us, our team will be happy to assist you. Trade-in or exchange possible! Machine buying and selling PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For more information or contact options, visit our website.

Condition: used, Year of construction: 2011, Rated voltage: 230V AC, frequency: 50Hz, rated current: 6.3A, control voltage: 24V DC, compressed air supply: 5bar, compressed air consumption: 5Nl/min, connected load: 0.34kW, length: 790mm, width: 950mm, height: 1270mm, weight: 135kg. An on-site inspection is possible. Blsdpfx Ao Agn Rqedhep

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Label dispensing module for print integration, print module 4L300 thermal transfer printer, belt conveyor, see photos for details. Blodozn N Nnjpfx Adhep

Year of construction: 2017, operating hours: 157 h, condition: used, functionality: fully functional, machine/vehicle number: 0000014/21, Essemtec pick-and-place machine paraquda.g2 with dual head Accessories: 8x 8mm double high-speed feeder; 10x 12mm high-speed feeder; 6x 16mm high-speed feeder 3x 16/24mm high-speed feeder; 2x 32/44mm high-speed feeder; 3x 8mm 10-lane feeder Blodew U Dpqepfx Adhop 1x 8/12mm 8-lane feeder