Used Other waste management & recycling machinery for sale (123)

Condition: ready for operation (used), Ventilator Cgolitzlenac Ilsmet Driving: 22 kW

Condition: used, machine/vehicle number: 12195, Inlet: 600 x 600 mm Drive: 2 x 37 kW Cgelohvkdfsitzlmet

Condition: used, Year of construction: 2013, operating hours: 16,520 h, KMU LOFT vacuum evaporator for industrial wastewater treatment TYPE: Destimat LE400 Year of manufacture: 2013 Operating hours: 16,520 Condition: Completely overhauled: Motor, compressor Defect: Does not start automatically. Valve needs to be adjusted. Cgeliowgfgiotzlmjt No problems after startup.

Condition: used, Technical data for the bale loosening drum: Manufacturer not known Type of bale loosening drum Year of manufacture not known Cgjlitzou Thx Rslmet Dimensions of the drum 6000 x 3000 mm (l x d) Height of the welded-in helix 300 mm Dimensions of the drum frame 4900 x 3400 x 2200 mm (L x W x H) Drive power 2 x 4 kW Functional description: The bale loosening drum was fed with pressed paper bales from which the binding wire had previously been removed. The pressed and compact bale is broken up and loosened by the baffle plates welded into the drum parallel to the conveying direction. The helix, which is welded in with an incline to the conveying direction, transports the loosened material further to the drum outlet. Here it falls through a hopper onto a conveyor belt for further processing. Scope of delivery: Bale loosening drum Frame with drive and roller bearings for the bale loosening drum Comments: Documentation (operating instructions, CE declaration, electrical/hydrical circuit diagram) is not available and cannot be supplied. Viewing is possible by appointment. We accept no liability for the technical details or any errors.

Year of construction: 2008, operating hours: 6,300 h, Condition: used, Functionality: fully functional, machine/vehicle number: BACKHUS 17.50 573 08, Machine No.: 17.50 573 08 11 Year of manufacture: 2008 Operating hours: approx. 6,400 Equipment: Mobile cab Air conditioning SBA protective ventilation Condition: very good Work performed: New service, replacement of all oils and filters Diesel engine checked Rotor including tools in mint condition Replacement of all defective hydraulic hoses New tracks with rubber pads New throw limiter flap New protective ventilation filter New scraper bar on track clearer Restoration of all technical functions Incl. paint treatment Technical specifications: Curtain width up to: 5.0 m Curtain height up to: 2.4 m Curtain cross-section at 45°: 6.21 m² Cgjlitzljv Iy Raemot Turning capacity up to: 3,600 m³/h Feed speed: 0-50 m/min Dimensions Working: Height 4,600 mm Width 5,450 mm Length 4,780 mm Transport Dimensions: Length: 2,550 mm Width: 7,550 mm Height: 3,100 mm Engine: Cummins QSC 8.30 lt, 6-cyl. 209 kW / 280 hp Weight: approx. 12,000 kg

Year of construction: 1994, Condition: used, No. 10013 Cable stripping machine Eldan M3 Used, year of construction 1994 According to our customer, the machine is fully functional and can be tested during an on-site inspection Cable stripper from Eldan Recycling Denmark Cgjljwbi Akoitzlmot Cutting speed / Capacity up to 30 m/min Cable diameter 10 - 75 mm Motor 7.5 kW 400 V, 50 Hz Transport dimensions approx. 1300 x 900 x 1500 mm LWH Weight approx. 800 kg Sale on behalf of customer, ex location near 85221 Dachau, without disassembly, without transport and assembly Errors in description and price excepted Disassembly, transport and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location

Condition: ready for operation (used), Compressor Brand: Atlas Copco Cgelitzlei A Anaomet Type: GA 808 PACK Pressure: 8 Bar Motor 75 kW, Brand: Simens.

Condition: used, machine/vehicle number: 9394, Year of manufacture: 2015 Technical data: Main dimensions length/height/width 1430/1730/780 mm Discharge opening diameter 102 mm Number of knives and blades 3+1+9 Cslitzlsghgpgomsgt Drive: 22 kW Total weight of the machine approx. 400 kg Possible sieve holes Ø 4-25 mm

Year of construction: 2013, Condition: used, Technical data of the bale opener line for RDF. MSW, paper, cardboard: Manufacturer Cross Wrap Oy Ltd, Siilinjärvi, Finland Type BO 4000 Year of manufacture 2015 Quantity of opened bales 674 pieces Operating time only 3 days, exclusively by running in the entire line during new installation Opening time approx. 45 seconds per bale Bale dimensions (W x H x L) 1100 x 1100 x 1400 - 1900 mm Max. Bale weight 2,000 kg Conveying height of the system 1,400 mm Max. Conveying width of the system 1,200 mm Material to be opened RDF/MSW Availability of the line 98% Noise level of the bale opener line 85 dB(A) Total connected load 37 kW Rated current 125 A Operating display SIEMENS SIMATIC HMI Touch Control SIEMENS S7 ET200S Installation dimensions 8,463 x 2,890 x 3,960 mm (l x w x h) Cslitzeu Tg I Djlmogt Scope of delivery: Feed conveyor 3,500 x 1,200 x 1,400 mm Feed conveyor to opener 1,500 x 1,200 x 1,400 mm Bale opener (gripper with knife) Special equipment: Oil heating in hydraulic oil tank Heating in control cabinet Oil cooler in Hydraulic unit Explanation of the short period of use: The entire line of Cross Wrap bale openers type BO 4000 was installed at a municipal waste incineration plant in 2015. The background to the installation was that in the case of a malfunction or maintenance of the incinerator, the municipal waste could continue to be received, baled, wrapped and stored until the malfunction was cleared. Then the bales should all be opened again and the waste fed into the normal incineration process. This worst-case scenario never came to pass. The plant was set up, run in and then never used in regular operation. Only during the commissioning and running-in of the entire plant in 2015 were 674 bales opened on three days. The plant is in very good condition and ready for operation immediately. Due to reconstruction measures in the incineration plant, the installation area of the bale opener was needed. As a result, the entire line is for sale. Short description of the wrapping process: The pressed bales are placed on the infeed conveyor belt from the side or from behind by means of a forklift truck. For opening, the bales must run horizontally to the conveyor belt with the wire or twine binding, otherwise the bales must be turned 90° beforehand. The opening conveyor brings one bale at a time in front of the cutting unit. The grippers hold the wires or twine strapping. The front and rear rotating knives slit the bale lengthwise. Afterwards, the gripper returns to the starting position. The opened bale is now conveyed via the conveyor belt to the discharge chute and then falls onto the following conveyor system. Comments: New price of the completely plant 296.000,- €. The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagram) is complete. The unit has been dismantled into freight-manageable units, stored and is available for inspection and loading at short notice. We do not accept any liability for the technical details or any errors.

Year of construction: 2003, operating hours: 1,990 h, Condition: reconditioned (used), Functionality: fully functional, machine/vehicle number: BACKHUS 16.50 337 03, Machine: Machine no.: 16.50 337 03 Year of construction: 2003 Operating hours: approx. 1,990 Equipment: hydraulic joystick Air conditioning (new) SBA protective ventilation (particle dust filter in cab roof) Cab console with quick-change system (new) Special equipment: ORKAN rotor ventilation system (patent pending) (up to 4,000 m³/h fresh air intake during the transfer process) meetra Rhino rotor with 50 tools (W 150 x L 300 mm) can be used on both sides A camera with a 7 inch screen allows the driver to view the rotor, making it possible to adjust the optimum rotor speed to the material to be rotted. Condition: very good, service (new), track drive (new), rubber pads with quick-change system (new), track clearer overhauled, hydraulic hoses (new), frame sandblasted - repainted in RAL 6021 + 3027 Technical data: Width of windrow up to: 5.0 m Windrow height up to: 2.4 m Cgjlitzljkqxn Iemjt Windrow cross-section at 45°: 6 m² Transfer capacity up to: 3,000 m³/h Feed speed: 0- 50 m/min Work dimensions: Height 4,500 mm Width 5,200 mm Length 4,780 mm Transport dimensions: Length: 2,550 mm Width: 7,150 mm Height: 3,150 mm Engine: Cummins QSC 8.30 lt, 6-cyl. 209 kW / 280 hp Weight: approx. 10,000 kg Engine: Machine-No.: 16.50 337 03 Year of built: 2003 working hours: approx. 1,990 hours Equipments: hydraulic joystick Air conditioning (new) Protective ventilation SBA (particulate dust filter in the cab roof) Cabin console with quick-change system (new) Special equipments: ORKAN Rotor ventilation system (Patent pending) (up to 4.000 m³/h Fresh air entry during the implementation process) meetra Rhino-Rotor with 50 tools (W 150 x L 300 mm) both sides usable A camera with a 7-inch screen gives the operator a view of the rotor. This makes it possible to adjust the optimum rotor speed to the rotating material. Condition: very good, service (new), chain drives (new), Rubber padding with quick-change system (new), track clearer revised, hydraulic hoses (new), Frame sandblasted - repainted in RAL 6021 + 3027 technical Data: Heap width up to: 5,0 m Heap height up to: 2,4 m Heap cross-section at 45°: 6 m² Displacement capacity: 3,000 m³/h Foreward speed: 0- 50 m/min Dimensions of work: height 4,500 mm width 5.200 mm length 4.780 mm Transport dimensions: Length: 2,550 mm Width: 7,150 mm Height: 3,150 mm engine: Cummins QSC 8.30 lt, 6-cyl. 209 kW / 280 hp Weight: approx. 10,000 kg

Condition: used, Year of construction: 2022, No. 10009 Cable stripping machine Pecher PR3 Evolution Used, year of construction 2022 Cable stripper with 12 tracks for efficient working 150 operating hours Motor power 4 kW / 380 V Cutting speed 44 m/min Working area 1.5 mm2 - Ø 90 mm Quickly and infinitely adjusted via hand wheel The cable stripping machine‘s cutter and feed rollers can be replaced individually Cables are force-guided and slit open from both sides Automatic cutter cleaning Sturdy welded construction of the cable stripper 24 disc cutters from hardened tool steel Tempered steel feed plates Machine table made of stainless steel Galvanized machine frame and panels Precisely milled sliding guides Double pendulum bearing Reverse gear foot switch Squeeze facility for solid cables Powered upper and lower cutters Transport dimensions approx. 1800 x 1000 x 1520 mm LWH Weight approx. 700 kg Sale on behalf of customer, ex location near 85221 Dachau, without disassembly, without transport and assembly Errors in description and price excepted Disassembly, transport and loading by us optionally possible Cslitov E Rr Ajzlmogt To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location

Condition: ready for operation (used), Idlers with rolls For Belt 800 mm Rolls with size: 240 mm x 390 mm x 240 mm ∅ 133 mm Cslitzoi A Arzslmsgt Price €38 a Piece 290 pieces in Stock

Condition: new, The ZSH chipper series is specially designed for forestry, horticultural and municipal operations. Mainly these chippers are used for volume reduction of tree and shrub cuttings as well as smaller trunk diameters. The wood chips produced are suitable for combustion in wood chip heating systems with screw conveyors or also as a preliminary stage in pellet production. The machines are robust, reliable, easy to operate, powerful and produce wood chips of consistent quality and size. Celitsghgi Eezlmsgt Other Low-cost solution for the production of wood chips l Compact design l User-friendly l Low energy consumption

Condition: used, For sale is an almost new bale opener line from a paper recycling plant for the production of ‘fluff pulp’ (long-fibre cellulose) from unmixed paper and cardboard production waste. The entire system was newly installed in 2021 and unfortunately never went into production. In 2024, the final decision was made to dismantle the entire system technology and sell parts of it. The resulting bale opener line only ran for approx. 2 hours in set-up mode after installation and never went into production. The system was designed for a throughput of 20 tonnes of fluff pulp per hour. Technical data on the used bale feed conveyor: Manufacturer Bollegraaf Recycling Solutions B.V. Type HBT 1400/1200 * 12500 - 0° (chain belt conveyor) Overhaul of the conveyor belt in 2021 Operating hours after overhaul approx. 2 hours Effective width 1200 mm Belt length 10,150 mm Cgolitzleu Tg Nbemot Drive power 3 kW, the belt speed of the motor can be regulated via a frequency converter Belt speed 1.6 - 5.5 m/minute Belt type 250/2, 3+1, thickness 6.1 mm, the belt is without carrier Technical data for the bale opener and dewiring unit: Manufacturer Cross Wrap OY Type DW 1400 dewiring unit Year of manufacture 2021 (new machine) Operating hours approx. 2 hours (exclusively set-up operation by the manufacturer Cross Wrap) Min./max. permitted bale dimensions: Height min. 700 mm, max. 1400 mm Width min. 700 mm, max. 1400 mm Length min. 1100 mm, max. 2500 mm Bale weights min. 250 kg, max. 2000 kg Bale materials Paper, cardboard, plastic films, plastics, pulp and various other recycling materials Throughput capacity up to 60 bales per hour, depending on material Remark: The bale opener and dewrapper is a new machine, built in 2021 and was operated exclusively by the manufacturer Cross Wrap for approx. 2 hours in set-up mode. The system works fully automatically. Bales are held on the infeed conveyor belt by two hydraulically operated grippers. The bale opener follows the contour of the bale and automatically cuts through the wrapping film and the steel or plastic bale wires with a hydraulically driven, rotating knife. The hydraulically driven gripper system holds the film with the steel or plastic bale wires and pulls them out sideways after the opening process. Finally, the wires and film are wound into small coils via a winding unit and ejected into a box via a side chute. Once the bale has been opened and the film and wire removed, it is discharged into the storage bunker with a dosing drum using a conveyor belt. It is then broken down into several pieces. Remark: The feed hopper with dosing drum (drumfeeder) is used, built in 2014 and was overhauled in 2021. After the overhaul and assembly, the conveyor belt has only been in operation for approx. 2 hours in set-up mode. Comments: Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: ready for operation (used), a pallet Couplings (unused) Brand: Krupp Diameter from 200mm till 800mm Tot. Weight appr. 25-35 tons Cgelitji A Au Djzlmot

Condition: new, machine/vehicle number: AMIS Kabelaufbereitung, Plant consisting of granulator, sorting table for the separation of free and copper granules, suction system and control cabinet. Each as transportable elements pre-assembled on base plates. Cgelitzloghgizomet Advantages of the compact plant: low overall height, low space requirement, easy-to-clean and easy-to-maintain arrangement of components, short assembly time and, last but not least, the favorable price.

Year of construction: 2013, Condition: used, We offer you a used PET bottle crusher of the manufacturer BOREMA, type R-1200 F, year of construction 2013, for residual emptying, deaeration and pre-compaction of the fed PET bottles, from 0.3 up to 2.5 l content. The machine has a chassis and can be moved into and out of the feed chute of your baler. The machine has a throughput capacity of approx. 85,000 bottles/h, corresponding to approx. 3t/h. We have the following technical information: Manufacturer: BOREMA Umwelttecjhnik AG Type: R-1200 F (with trolley for retracting and extending) Year of manufacture: 2013 Drive power: 11 kW Connected load: 15 kW Rated current: 32 A Back-up fuse: 40 A Type of construction: Continuous system Function: Double rotor press system Rotor pretension pneumatic: approx. 16t Overload protection: by anti-blocking system Input material: PET disposable and returnable empty bottles 0.3 to 2.5 L capacity Input material: HDPE bottles and canisters up to 3 l capacity Throughput capacity: approx. 3 t/hour, corresponding to approx. 85,000 bottles/hour, depending on size Required compressed air output: G1/2", 8 bar, 40 l/min. Cgelitsu Thpnezlmst Compression ratio: 1:3 Flange dimensions inside: 972 x 1220 mm Feed opening: 565 x 1280mm Weight: approx. 2500kg Possible applications: Due to the chassis, the PET flattener can be moved into the feed chute of your baler as required, thus ensuring residual emptying, venting and pre-compaction of the fed bottles and canisters. When the material is changed, the PET flattener is simply moved out of the feed chute again and paper, cardboard, film, etc. can now be pressed further without using the flattener. Process of the BOREMA PET crusher: The plastic packages are drawn in by two rotating shafts. One of the rotating shafts is pneumatically pretensioned by two air bellows and presses the PET bottles with 16 t of pressure against the second rotating shaft. In the process, the closed plastic bottle is squeezed together, caused to burst and vented. Residual liquids run out and the material falls into the baler in a precompressed state. When impurities are introduced, the pneumatically pre-tensioned shaft deflects to the side and the impurities are channeled through. Significant advantages compared to conventional PET perforators with punching mandrels or knives: The BOREMA process is much more efficient and less subject to wear than conventional PET perforators with punching mandrels or knives. The biggest advantage is that any foreign matter such as metal parts, stones, bottles with frozen contents and pieces of wood are passed through the pneumatically deflecting rotor shaft without stopping the operation of the system or causing any major damage. With conventional perforators, mandrels or blades sometimes break off or become so jammed with the interfering material that the plant has to be shut down and repaired at great expense. Comments: The crusher is in good condition, was dismantled from the running operation, stored, is available at short notice and after assembly immediately ready for use. The documentation (manual, CE, electrical/hydraulic circuit diagram) is complete. An inspection is possible by arrangement. The technical information is taken from sales brochures, the operating instructions or other information provided by the manufacturer. We accept no liability for incomplete or incorrect data and informations.

Condition: ready for operation (used), Hazemag Percussion Mill AP 4 Colitsuimvyezlmsgt complete with Drive unit, Spare rotor + spare parts Capacity : approximately 150 T/h. Power : 35 to 120 kW Opening : 700 x 1000 mm Weight : about 11000 kg Special offer now € 15,000

Condition: new, machine/vehicle number: 10463, The AR series are low-speed rotors. They are available with 2, 4, 6 or 8 worm shafts. The machines are designed so that each screw unit is independent and mounted separately in the chassis. Screw shredders are designed for shredding friable materials (wood, paper, gypsum, mineral wool, etc.). The machines are largely insensitive to interfering materials such as glass, iron parts, stones, etc. Colieghgipstzlmsgt The AR series is ideally suited for use as a bale breaker for e.g. PET bottle bales.

Condition: ready for operation (used), Lot Conveyor Belt Fasteners : 85  Boxes – Nilos SO11 37  Boxes – Nilos 7/vc 92  Boxes – Comet P15 Cgslitzlji A Aukomot 21  Boxes – Mato U37/1200 56  Boxes – Asgor 4

Condition: new, In every calculation of the economy and public life, waste transports are an essential factor. Here, it is less the weight but more the volume that is important. The constantly rising transport costs of these wastes are increasingly an economic problem. Particularly important in the sales sector is the disposal of the large quantities of styrofoam or packaging films. The VOLUMEN-ZERKLEINER ensures a volume reduction of up to 80 percent at this point. Bottles of all types and sizes, e.g. champagne bottles, can be crushed without any problems without a depressing device. The unpacking of expired foodstuffs is also possible. Furthermore, reject products such as medicines, data carriers or counterfeit products can be rendered unusable. Food scraps and food waste, even bones, can be shredded with the VR60, collected and converted into electricity and heat in biogas plants. Think also, for example, of a deposit bottle machine. The PET bottles are pressed and kept under lock and key until they are taken away because of the barcode present. By using the VOLUME SHREDDER, one could make the barcodes of the PET bottles unrecognizable and thus achieve a huge volume reduction. Shredded bottles could now be collected in a large container and would therefore not have to be collected daily from the collection points. The vertically moving, wear-free knives of the shredder ensure a quiet and clog-free working process. ALL ADVANTAGES AT A GLANCE Rotation-free shredder No material build-up due to non-rotating knives Automatic feeding by the movement of the knives Automatically reversing knives in V-shape prevent jamming or sticking Quick component change due to modular system Intelligent control by compact logic system (PLC) One-button operation Ejection of the material optionally also possible via conveyor belt Shredder module can also be integrated into existing plants Cgjlitzeghgc Helmet Low blade wear and maintenance costs due to highly abrasion-resistant steel with a nominal hardness of 600 HBW VR60 IN DETAIL Dimensions: 90 cm x 70 cm x 85 cm Weight: approx. 190 kg Power consumption: 3 kW Connected load: 400 V three-phase alternating current

Condition: ready for operation (used), Rollers unused, year of manufacture 2015 510 pieces with Lenght: 380 mm — Diameter: 133 mm — Axis: 30 mm. *Brand: Precimeca / Continental:= SOLD OUT 857 pieces with Lenght: 750 mm — Diameter:  133 mm — Axis: 30 mm.= SOLD OUT 341 pieces with Lenght: 530 mm — Diameter: 133 mm — Axis: 30 mm.= SOLD OUT Cjlji A Awmeitzlmogt

Condition: ready for operation (used), SUSPENDED IDLERS Colitsnac Idozlmsgt For Belt 800 mm Rolls with size: 315 mm L x 108 mm ∅ Price €28 a Piece 1050 pieces in Stock

Condition: ready for operation (used), Idlers with rolls For Belt 1000 mm Rolls with size: 380 mm x 133 mm Cslitzlji A Artomogt Price €36 a Piece 500 pieces in Stock

Condition: ready for operation (used), Head and Return Drums Celisi A Aq Sstzlmsgt in divers diameters and Lengths