Used Other waste management & recycling machinery for sale (123)

Condition: ready for operation (used), Head Drum FAM (unused) Beltwidth: 2000 mm Roll lenght: 2200 mm, Ø 830 mm Cjlrbrbsi A Aras Tegt Incl.: Bearings and rubber liner

Year of construction: 2024, Condition: as good as new (ex-display), Grinder / Granulator / Separator. Complete electric cable recycling line. Celrovm Ar Rsbrb Tsgt New and in stock. Equipped with a shredder, a separator, a vibrating table and a magnetic table for iron, this machine recycles your cables and guarantees you the purest raw material. Europe's best value for money. Contact us for more information, photos and videos.

Condition: good (used), For sale: complete container washing installation suitable for Kliko and DIN roll containers. This installation consists of the following parts: Cjlrbju Sqpforb Togt -3 high pressure water pumps: - 2 pumps are intended for the container washing installation -1 pump is intended for the seperate spray lance including reel -2 hot water diesel heaters - A hydraulic generator that controls the tipper and spray heads The container washing installation is available from the beginning of December 2024

Year of construction: 2001, Condition: ready for operation (used), A Schulte and Strehlau channel baling press (Euro-Press) is available. Pressing force: 200kN, feed opening dimensions X/Y: 700mm/675mm, max. throughput: approx. 3000kg/h, drive power: 5.5kW, machine dimensions X/Y/Z: approx. 5300mm/1600mm/2700mm, weight: approx. 2200kg. Documentation available. On-site inspection is possible. Cgelrbjv Amqverb Tst

Condition: used, Big Bag filling station loading station filling machine Height adjustable from 1150-1800mm Total height +/- 3100mm Equipped with hydro-unit for lifting big bag Complete with weighing control (operation unknown, last calibration / inspection 05/2023) Dimensions pallet 1200mm x 1150mm See our other advertisements Cjlrbrou Hk T Teb Tsgt VMA Wekerom

Year of construction: 2023, operating hours: 50 h, Condition: new, machine/vehicle number: 1940051-01-01, Functional Description: This forward-looking rotor bucket ensures quick and clean transfer of compost and other bulk materials. The material is picked up in the same way as with a conventional wheel loader shovel. At the discharge point, the rotor is started by means of the automatic control. The hydraulic rear wall pushes the material evenly to the rotor depending on the rotor speed. The counter-rotating rotor mills off the bucket contents, mixing it well and discharging it loosely. Optimum conditions are thus created for the composting process. Lumps and compaction are reliably broken up and a well-mixed bulk material is produced. Colrbrbjfl Hz Ts Togt

Condition: ready for operation (used), Lödige Ploughshare mixer (Stainless Steel) Unused Cgolrbstzndwerb Tst Brand: Lödige Type: KM 1200 DW Power: 55 kW motor. Incl.: water injection system On Stock: 2 pieces.

Year of construction: 2024, Condition: new, Professional stripping machine Stripper Stripper New machines in stock! You can easily strip ALL KINDS OF CABLES (hard plastic, underground, steel armored, lead, flexible, Alu....) FROM 3mm to 14cm, Double cut up to 9cm Robust, high-performance machine Three-phase connection Weight: 500kg Motor power: 4kw Dimensions: 1550x700x1350 Easy and pleasant to use Braked castors adjustable blade function Very easy to adjust guarantees maximum safety Motor features forward and reverse Cslrbsvm Aq Tjrb Tegt Minimum maintenance Cabinet design for storage Positive customer feedback Contact us for more information, photos, videos...

Year of construction: 2017, Condition: used, waste oil collecting tank . filling capacity 1000 Liter . with level indicator . Cslrbroii Sgnsb Togt +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Year of construction: 1994, Condition: ready for operation (used), Motor power: 15.5kW/19.5kW, pressing force: 320kN, spec. pressure: 425kN/m², machine dimensions X/Y/Z: approx. 5700mm/1900mm/1800mm, weight: approx. 6000kg. The machine has a defect due to moisture and should be checked. Celrbrboip D Rps Tegt

Year of construction: 2023, Condition: new, Functionality: fully functional, This machine, type KM13, cuts electrical cables from 20 to 120 mm in diameter. The different diameters are easily adjusted by turning the hand wheel up and down. The machine has a speed of 25 mtr/min. The dimensions are: length 600 mm, width 600 mm and height 1600 mm. The weight of this machine is about 200 kg. This machine is powered by a 380V-50HZ, 3KW electric motor with a gearbox cabinet. The cable is cut from 2 sides so the copper core falls out easily. Spare parts such as blades, drive, bearings etc can also be supplied. If required we can also perform maintenance on these machines A machine that is ready to use and easy to operate. If you want to try it, please bring cable. Coleq E Ti Horbrb Togt

Year of construction: 2005, Condition: defective spare-parts repository (used), Functionality: not functional, machine/vehicle number: 1030 425 05, The machine was taken out of service about 4 years ago because the "small" milling rotor stopped. Hydraulic damage was suspected. The Cummins diesel engine QSC is running and the machine is ready to go. As the rotor unit is badly worn, it is too much work for us to repair the machine. The machine can be viewed by appointment. Celrbjtyirherb Tsgt

Condition: new, Year of construction: 2024, Functionality: fully functional, machine/vehicle number: Modelle: 55/500; 75/800; 35/450, WiPa conveying blowers of type WRTG, in the models: 55/500; 75/800; 35/450. These are used for the pneumatic conveying of shredded plastic material. Unlike the WTG conveyor fan, the WRTG conveyor fans are equipped with a belt drive that transfers the motor drive line to the impeller. The type WRTG is used, for example, in washing systems in which moist materials are to be transported pneumatically. As the drive unit is separated from the impeller by a belt drive, no water can penetrate the motor. The bearing unit of the impeller is protected against the ingress of water and dirt. A generously dimensioned maintenance door makes cleaning and maintenance work very easy. Also available as a wear-protected version. -- AVAILABLE IMMEDIATELY-- SUBJECT TO PRIOR SALE -- THE PICTURE IS AN EXAMPLE REPRESENTATION -- Cgjljuw Sbysrbrb Tst

Condition: new, Tractor accessory (3-point hydraulic system) for active turning of compost and soil, etc. The HP compost turner is designed for installation in a 3-point system (KAT II or KAT III) for tractors with a power of approx. 50-120 HP. The turner is driven by the tractor's power take-off (540 rpm). The rotor turns at approx. 180 rpm. For road transport, the machine can be hydraulically lifted upwards. Technical data: Windrow width up to: 2,2-2,5-2,8 m Windrow height up to: 1,45-1,7 m Turning capacity up to: 800 m3/h Rotor diameter: 614 mm Weight approx.: 1.100-.1200-1.320 kg Cgslei Tvagjrbrb Tet Tractor power: 50-120 HP

Year of construction: 1998, Condition: ready for operation (used), A Big HK 25 press is available. Pressing force: 250kN, dimensions X/Y/Z: approx. 5600mm/1100mm/3900mm, weight: approx. 5000kg. Cjlrbrbstva Dce Tegt

Year of construction: 2024, Condition: new, This robust professional cable stripping machine, type KM1, cuts electrical cables from 1 to 70 mm in diameter. The blades are hardened so when stripping reinforced ground cable they are not immediately blunted. There are 15 different cable entries. The cable is cut from 2 sides so the copper core comes out easily. You can also use it to strip rubber and flat cables. Technical data: Mains voltage: 230 v ~ 50 hz Power: 3000 watts with dual pulley drive. Dimensions: 60 cm long, x 75 cm wide and 90 cm high Machine speed: 35 m/min Cgelrep I I U Dobrb Tjt Output: Depending on the cable 400 and 1200 kg/day Weight: 185 kg.

Year of construction: 2023, operating hours: 0 h, Condition: new, machine/vehicle number: DACHS HP 2.5, The DACHS HP compost spreader is designed for mounting on a 3-point system (KAT II or KAT III) for tractors with a power of approx. 50-120 hp. The spreader is driven by the tractor PTO (540 rpm). The rotor then rotates at 180 rpm. Coloifn Dgsrbrb Tjgt For road transport, the machine can be swung up hydraulically.

Condition: new, Year of construction: 2024, Functionality: fully functional, machine/vehicle number: Modelle: 55/500; 75/800; 35/450, WiPa conveying blowers of type WTG, size: 55/500; 75/800; 35/450. Colrjuw Sbgebrb Tsgt These are the standard for pneumatic conveying in the plastics recycling industry. The material is sucked in by the blower, accelerated by the impeller and conveyed into the pipeline. The motor is bolted directly to the housing wall and picks up the impeller via the motor shaft. A generously dimensioned maintenance door makes cleaning and maintenance work very easy. Also available as a wear-optimized version -- AVAILABLE IMMEDIATELY-- SUBJECT TO PRIOR SALE -- THE PICTURE IS AN EXAMPLE ILLUSTRATION --

Year of construction: 2012, Condition: ready for operation (used), A Mecatex shredder for wool is available. Number of rotor knives: 45, number of fixed knives: 6, number of knife holders: 2, working length: 1000mm, motor power: 37kW, max. production capacity: 1000m²/h. Control cabinet dimensions X/Y/Z: approx. 600mm/420mm/2000mm, control cabinet weight: approx. 80kg. Machine dimensions X/Y/Z: approx. 1500mm/1500mm/2600mm, machine weight: approx. 2500kg, operating hours: approx. 900h. The hydraulics for tilting the hopper are defective. Documentation available. On-site inspection is possible. Coljtz Dk Terbrb Togt

Year of construction: 2016, Condition: ready for operation (used), Rotor diameter: 260mm, rotor blades: 3, stator blades: 2, motor power: 7.5kW, throughput: approx. 250kg-400kg/h, machine dimensions X/Y/Z: approx. 1500mm/1000mm/1600mm, weight: approx. 1200kg. Documentation available. On-site inspection is possible. Csleubyyvsrbrb Togt

Year of construction: 2007, Condition: ready for operation (used), A Stummer bale opener is available for opening compressed fiber bales for subsequent feeding. Output basic PES: approx. 1100kg/h, feed conveyor belt length: 5000mm, machine dimensions X/Y/Z: approx. 3550mm/2400mm/3000mm, weight: approx. 5000kg, operating hours: approx. 10200h. On-site inspection is possible. Cgjlrbrbovu Dfhj Tet

Year of construction: 2011, Condition: ready for operation (used), A Gross Apparatebau GmbH shredder, which was used in the wood industry, is available. Feed opening X/Y: 600mm/800mm, hopper volume: 0.6m³, rotor diameter: 252mm, rotor length: 600mm, rotor speed: 90rpm, drive power: 18.5kW, number of knives: 14, screen perforation: 10mm-40mm, suction nozzle diameter: 160mm, machine dimensions X/Y/Z: approx. 1800mm/1200mm/1650mm, weight: approx. 1300kg, operating hours: 4578h. Documentation available. On-site inspection is possible. Cslrbeu Nlkxsrb Tjgt

Year of construction: 1994, Condition: ready for operation (used), Motor power: 37kW, rotor diameter: 500mm, rotor width: 790mm, cross-section: approx. 500mm/790mm, stator blades: 2-row, rotor: 6 blades left and right. Including cyclone, pipes, blower, 3 sets of knives and sieves with a diameter of 6mm/8mm/10mm. Grinding capacity: 6 sieve: 150kg/h, 8 sieve: 300kg/h, 10 sieve: 400kg/h. Documentation available. On-site inspection is possible. Cjlrbrjui R Rcsb Tjgt

Year of construction: 2020, Condition: ready for operation (used), Six (6) identical pneumatic knife-gate valves Watergates are available. Housing: stainless steel, valve blade: stainless steel, max. operating pressure: 4bar, medium temperature range: -35°C-120°C, machine length: approx. 1873mm, machine diameter: approx. 382mm, weight: approx. 280kg. Documentation available. On-site inspection is possible. Cgelrbrbougmwle Tjt

Year of construction: 1995, Condition: ready for operation (used), A Big Komet 12 press is available. Pressing force: 120kN, dimensions X/Y/Z: approx. 4000mm/1100mm/1100mm, weight: approx. 5000kg. Colrjtva Dgebrb Togt