Year of construction: 2006, condition: used, 1 x Variovac Primus Thermoformer Model: Primus Year: 2006 *Has been serviced by Variovac twice a year since being manufactured* Width of bottom film (nominal width): 402 mm Width of top film (nominal width): 395 mm Stroke length: 260 mm Film heating: pre-heating Forming pump: 60 cmb/h Evacuation by: side ports Evacuation pump 250 cmb/h Gassing system: via side ports Cross cutting system: 2x combination punch Die size: 1. 400-260 R P Pack sizes: 2.2,3.2 Operating language: English Electric power supply: 3 x 400 V N/PE, 50 Hz Gksdpfx Aae Adriajnjd Automatic date coder Installed Gas Mixer 2x gas mixer installed Located in Bristol, UK

Condition: used, Skinetta ASK 450 Stretch Banding Machine Purpose of the Machine The stretch banding machines in the SKINETTA series are designed for tightly wrapping individual or multiple products with polyethylene film. In contrast to shrink wrapping machines, the film is stretched tightly around the packaging before sealing. This tension is the main advantage of this process, reducing film consumption by up to 20%. A particular advantage of the patented SKINETTA sealing system is the stepless, precise metering. The film is sealed in a very small area (welded), resulting in a clean seal with minimal overhang. By using a SKINETTAther or SKINETTAshrink hot air hood and a sufficiently wide film, the overhanging film can be reduced laterally. This increases the stability of the container and prevents individual products in correspondingly grouped containers from falling out sideways. With suitable additional devices, a complete closure of the containers can be achieved by sealing, crimping, and folding the sides. The SKINETTA stretch banding machine program includes six basic models for film widths of 25 to 200 mm, 290 mm, 440 mm, 590 mm, 790 mm, and 1,250 mm. In addition to the single-lane version, two- to four-lane systems are available to increase production output. SK series (semi-automatic): In the SK series, the products are manually grouped on the machine table by an operator. The insertion into the film and the subsequent stretch banding process are initiated either via a foot switch or a two-hand control. A later upgrade to fully automatic operation is possible (except for model SK 200). ASK series (fully automatic): Gjdpfxjp U T Ife Aanokd In the ASK series, the product feed, grouping, and subsequent banding are fully automatic with the help of appropriate additional devices. A modular system of feed, grouping, forming, and special components enables individual adaptation to a wide range of customer requirements. Thanks to more than 20 years of experience, proven standard components can be used for a wide variety of packaging tasks. Technical data Machine dimensions (basic machine) Length: 1670 mm Width: 980 mm Height: 1700 mm Table height: 1700 mm Weight: 400 kg Power connection: 400 V Power consumption: 6.1 kW Additional equipment: rod chain conveyor You can find more items – new and used – in our shop! International shipping costs on request!

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, type of input current: three-phase, !! This machine comes with a donor machine that can be used for spare parts. !! The Nordson FoamMelt 200 (FM 200) is a specialized dispensing system that mixes hot melt adhesives with an inert gas (such as nitrogen) to create a closed-cell foam. This process reduces adhesive consumption by as much as 50% to 65% while improving bond performance. Applications: Widely used for bonding, sealing, gluing, and gasket making in the automotive and packaging industries. Benefits of FoamMelt Technology Faster Curing: The foam cools down faster, enabling higher production speeds. Better Filling Properties: The volume increase due to the gas makes it ideal for filling gaps. Improved Safety: The lower heat density of the foam reduces the risk of burns for operators. Gkedpoy N Ahcefx Aaned

Year of construction: 2005, condition: excellent (used), 1 x Variovac Optimus Thermoformer Model: Optimus Yeae: 2005 *During its time in production it was serviced twice a year by Variovac UK* Basic data: Product: Fresh bacon. Weight: various Top film: pa/pe 62µ clear Bottom film: pa/pe 200µ clear Evacuation: internal vacuum pump Capacity: 2-6 cycles/minute Packaging/cycle: 1 lanes/1 rows = 1 pcs. Gksdpfs Adrhvsx Aanod Pack sizes external: 280x240 mm Pack sizes internal: 265x 223 mm Max. draw depth: 70 mm Description of product: Bulk bacon 1 -track/ 1 -row = 1 pack/cycle Vacuum only Located in Bristol, UK

Condition: used, Year of construction: 2002, The Fogg Monoblock Filler is a type of packaging machine designed for filling and capping bottles, typically used in industries like beverages, pharmaceuticals, and cosmetics. Here’s a brief description: Features: - Monoblock Design: Combines filling and capping processes in a single machine, enhancing efficiency and reducing the footprint on the production line. - Suitable for 38mm Caps: Specifically designed to accommodate 38mm diameter caps, which are commonly used in various bottle types. - Filling Mechanism: Utilizes a volumetric or gravimetric filling system to ensure accurate liquid filling, essential for maintaining product integrity and compliance with regulatory standards. - Speed and Efficiency: Capable of high-speed filling and capping, improving overall production throughput. Gsdpfxez Ht Ice Aanjkd - Versatile: Can handle various liquid types, from water to thicker, more viscous products depending on configuration. Applications: - Commonly used in the beverage industry for filling soft drinks, juices, and other liquids. - Suitable for pharmaceutical products requiring strict filling standards. - Used in cosmetics for lotions, shampoos, and other liquid products. Benefits: - Streamlined production process reduces handling and transfer times. - Improved accuracy in filling minimizes spillage and product waste. - Enhanced product shelf life due to airtight sealing. Dawson Debagger, which is suitable for 250ml bottles. We used to use the NAMPAK type (50mm x 50mm square), and 2 bags would fit width ways. A total of 6 bags could go on the bed at any one time, meaning a capacity of approximately 1500 bottles. We added a special air operated "gate" to the end where the dogchain is, which was for using PET bottles. As the PET bottles were smooth, they tended to stick together - so the function of the gate was to separate the row of bottles that was about to be swept by the dogchain from the rest of the bottles on the bed,. It worked very well, so we also used it for the HDPE bottles. The overall length is around 4.5m, and the width of the bed is I think 1200mm, with the widest part of the machine at about 1.8m. It runs on single phase power (16a, blue plug or hard wired) and has a variable bed speed setting. Speed: 0-8000 b/hr Depending on Volume Type: Monoblock CIP: Ring for connection Cap Feeder: Included Automation: Authentic Fogg controls Filling Heads: 18 Capping Chucks: 5 Cap Type: 38 mm Bottle Type: square Labeller: Graham Labeller Debagging Table: Dawson Included Collection Table: Included Conveyors: 13 meters and bends Bottle Rinser: Included Available: Immediately

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: A99965, overall weight: 93 kg, input voltage: 230 V, input current: 3 A, input frequency: 50 Hz, This semi-automatic pallet strapping machine makes strapping pallets with PP band much easier. The strapping machine has a fixed lance that is moved under the pallet. The lance guides the strapping band, and you can pick it up again on the other side of the pallet. Then, you manually place the strapping band over the pallet. You insert the end of the strapping band into the sealing section of the strapping machine. The strapping band is then effortlessly tightened, sealed, and cut. Gkjdj Adtuwspfx Aanod

Condition: used, Logopak 920 II PF Pallet Labeling System Manufacturer: Logopak Pallet Labeling System Model: 920 II PF Gkjdpsw U Tc Tefx Aanod Your advantages at a glance: Top speed (up to 240 pallets/hour) Fewer roll changes Maximum flexibility Robust design (protective housing) Intuitive operation via touchscreen Print engine quick-change system Thermal direct or thermal transfer printing for labels up to A3 Internal database, error diagnosis, and many other features Functions as a stand-alone solution or integrated into the network VLP 210 II F Label Printing System The Logopak VLP 210 is an intelligent label printing system for barcode product labeling. The robust mechanical design of the 10 mm thick aluminum die-cast housing with solid steel hinge plates was specifically developed for continuous operation in harsh industrial environments. The printer can be controlled externally via a serial interface or, thanks to its integrated intelligence, operated as a stand-alone device. SPECIFICATIONS Printing speed: 150 mm/s Core diameter: 50 mm/76 mm Label roll diameter: 180 mm Font size: 2 mm – 50 mm Printing direction: Rotatable by 90°, 180° and 270° Barcode types: Codabar, Code39, Code128, CodeMatrix EAN13, EAN8, EAN-128, Lata 2/5, Industrial 2/5, Interleave 2/5, ITF-14, Maxicode, PDF417, QR, UPC-A Interface: V.24 or 20 mA, network-compatible Memory (RAM): 1 MB battery-buffered CMOS memory, expandable to 8 MB Ambient temperature: 5 °C to 40 °C Dimensions (W x L x H): 700 mm x 500 mm x 400 mm Weight: approx. 50 kg Housing: Painted steel Integrated intelligence: IP54 control unit with Power Leap II® processing power • User-friendly interface with color LCD display and touchscreen • Multilingual user interface (standard) • Internal item database and error logging (standard) • Remote maintenance for software updates (optional) • 10 standard fonts, 4 scalable • Dual 64-bit RISC processors, 150 MHz clock • RS 422 and 20 mA, Ethernet connection also available (10/100 Mbps) • Industrial fieldbus for I/O control (CAN bus) with flexible programming using a higher-level PLC language • Up to 200 digital I/Os for process control without loss of efficiency More items – new and used – can be found in our shop! International shipping costs upon request!

Condition: like new (used), Year of construction: 2019, HERMA 725 D self-adhesive label applicator, C/D-Wrap – wrap-around design This label applicator, with a capacity of approximately 60 units/minute, is designed for labeling products and folding cartons with C-Wrap and D-Wrap labels. The performance range of the machine includes: Label carrier tape width: max. 160 mm Gkodpfxo Ah H Ans Aanjd Label roll diameter: 400 mm Tape width: 235 mm Includes HERMA 400 label dispenser Like new The machine is equipped with an Allen hot foil coder. Manufacturer: Herma Year of manufacture: 2019 Space requirement: 190 x 90 x 180 cm

Condition: good (used), Year of construction: 2018, MG Tech Leanbox Case former Serial: HO2859 Gsdpfx Aaowxlm Hsnokd 2018, Leanbox case former, 1250mm loading height, 600mm capacity cardboard, currently set for 385mm x 385mm form punch, up to 20 boxes per min, touch screen controls, max blanks 750mm x 750mm, 3Ph

Condition: used, Semi-automatic pallet wrapping machine, stretch wrapping machine Design with a horseshoe-shaped rotating platform for easy loading with a pallet truck Semi-automatic pallet wrapping machine Manufacturer: Siat Type: HSD 312-S Model A 400 Volt / 50 Hz Year of manufacture: 2000 Gkodpfjpygwqox Aansd Pallet wrapping machine Capacity: 1200 kg Rotating platform: with fork recess Rotating platform diameter: 1500 mm Adjustable rotating speed of the rotating platform Motorized film pre-stretch adjustable to 100% or 200% Rotating table height: 75 mm Wrapping programs Program 1: Double wrapping with raising and lowering of the film carriage Program 2: Double wrapping with raising – pause for attaching the top cover of the pallet – and lowering of the film carriage Program 3: Simple wrapping with only raising of the film carriage Program 4: Simple wrapping with raising of the film carriage and pause for attaching the top cover Intended use Wrapping palletized loads with stretch film or netting pallet wrapping machine Maximum pallet dimensions: L = 1200 mm W = 800 mm H = 2100 mm kg = 1200 pallet wrapping machine, stretch wrapping machine More articles – new and used – can be found in our shop! International shipping costs on request!

Condition: used, Year of construction: 2017, We offer a used Saropacker S560 shrink-wrapping machine in near-new condition, as it has been used very little. It was manufactured in 2017. Gkjde Aig Hyopfx Aaned Manufacturer: Saropacker Model: S560 Year of manufacture: 2017 Condition: Used Type of equipment: Shrink-wrapping machine If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: reconditioned (used), Year of construction: 2009, functionality: fully functional, Strapack RQ8 automatic strapping machine, 8mm strapping, year 2009, speed of 45 cycles per minute, automatic threading, tension adjustment via potentiometer, new clutch, complete overhaul performed. Gkjdpfo Ah Efzsx Aanjd

Condition: used, Semi-Automatic & Fully Automatic Pallet Wrapping Machine Manufacturer: Cousins Model: LPSWA-CE (“The Switch Semi2Auto”) Operating Type: Semi-automatic & Fully automatic Year of Manufacture: 2021/2022 Features and Specifications of the LP-SWA SERIES Production Speed: Up to 35 loads per hour. Load Capacity: Maximum load weight: 4,500 lbs dynamic – 10,000 lbs static Maximum load size to safely pass through the tower: 67" x 67" (96" load diagonal) x 80" H Maximum load size to remain within the turntable: 46" W x 46" L (65" load diagonal) x 80" H Low-profile turntable: 65-inch diameter, laser-cut steel plate with all-around deck protection. Maintenance-free 54-roller bearing support system. Turntable height 2.813 inches from the ground. ANSI No. 50 direct chain drive with chain tensioner. Rotational speed between 3 and 12 RPM with smooth start acceleration. 1/2 HP AC motor with variable speed. End-of-cycle deceleration and positive stop alignment. Robust all-around deck to protect the turntable, 3-sided loading, and pit mounting. Forklift openings front and rear for easy movement. Accu-Count precise turntable positioning system for additional film savings! Film carriage lift: 1/2 HP DC motor with variable speed ANSI No. 40, direct chain drive with shock absorber and anti-drop protection Automation Features: All-electric – No pneumatics required Patent-pending A-arm film cutting and holding device starts and ends the wrapping process at the top of the load. Cousins Smart Engineering has developed an advanced cutting and holding device with the A-arm. It offers significant productivity improvements and safety benefits. This technology is only available on Cousins machines. This unique method of applying and cutting the stretch film offers the following advantages: • Selectable top wrapping function • Stabilizes the load early in the wrapping cycle • Places the film end at the top of the load instead of at the bottom • No film clamp on the turntable that can be damaged by dirt or operator error – also, no slip rings are needed to power the turntable, reducing maintenance • The placement of the load on the turntable is not critical • No air connections or noisy compressors • New automatic load detection safety feature during the first rotation detects uneven or partially stacked top layers and automatically adjusts the A-arm height to avoid obstacles • A-arm anti-drop protection Gkjdpfxewb A N Rs Aaned Control Functions: Electronic control with LED user interface Wireless start/stop remote control with one transmitter (additional transmitters available) On/Off/Reset switch and operating indicator Automatic wrapping cycle start/pause with a single button Cycle pause for applying top sheets Reinforce wrapping control for the wrapping center Emergency stop button Turntable jog button Buttons for lowering and raising the film carriage Control of film tension (force-to-load) Separate speed controllers for raising and lowering the film carriage Variable speed control of the turntable Three-beam automatic load height sensor for dark or glossy loads Separate control for 1 to 12 wraps for upper and lower wrapping Selectable parameters for reduced film tension for top wrapping

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, Capacity of up to 45 bottles per minute. Single-head heat-shrink sleeve applicator. Gkjdpfxs Ahx Tis Aaned Includes a 4-meter infeed conveyor belt and a 4-meter outfeed conveyor belt.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, Transpak TP702, arch 650x500, 8mm strapping, adjustable tension via potentiometer, automatic strapping feed and ejection, optional anti-condensation heater, activation by foot pedal or button, speed: 55 cycles per minute. Gkjdpez Ea Dbefx Aanjd

Condition: good (used), Year of construction: 2012, 2 x Carton closing machine / carton sealer with wet adhesive strips, Bedo, VA 3821 – used: Price ex-works: Year of manufacture: 2006: €5,500 (net), incl. loading! Year of manufacture: 2012: €8,500 (net), incl. loading! Manufacturer: Bedo Type: VA 3821 (No.: 3821.2.7062) Year of manufacture: 2012 3/N/PE AC400/230V 50Hz Control voltage: 24 VDC Current: 16 A Compressed air: 5-7 bar Gkedpfxs Agpdgs Aansd Type: VA 3821 (No.: 3821.1.6093) Year of manufacture: 2006 400/3PN/50Hz, 14.8A, control voltage: 24V, Compressed air: 5-7 bar Carton infeed height: approx. 800 mm Infeed speed: approx. 0.4 m/s Carton design: FEFCO code 0201 Processing range: L 200–600 mm, W 150–500 mm, H 80–480 mm Carton sizes: e.g. 300 × 200 × 100 mm to 600 × 400 × 275 mm Carton content: 0.2–32.5 kg Capacity: approx. 25 cartons/minute Carton sealing: longitudinal, top and bottom with wet adhesive strips Adhesive strip tear control and warning “Adhesive strip roll end” Control “Water supply disrupted” Condition: good, regularly maintained, in operation until early 2026 Available: immediately Location: Leipzig area

Condition: used, Year of construction: 2006, Max. tray outer dimensions: 435x365mm, max. tray depth with ejector: 130mm, max. film width: 500mm, max. film roll diameter: 220mm, cycle rate in vacuum and modified atmosphere packaging mode: 2-4 cycles/min, vacuum pump: 63m³/h, electrical connection: 380V, connected electrical load: 8.75kW, compressed air supply: 7bar, compressed air consumption: 80l/min, cooling water pressure: 2bar, cooling water consumption: 100l/h, protection rating: IP55, weight: 400kg. On-site inspection is possible, the machine is located in France. Gksdpfx Aae Akd R Hjnod

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, Capacity of up to 90 bottles per minute. 9-meter conveyor infeed (double lane) and 15-meter conveyor outfeed in a U-shape. Cosmotec cooling unit for the electrical cabinet. 4 reels (2 x 2) can be used simultaneously on the machine, with an accumulation unit to prevent downtime during reel changes. Gedpfx Aaj Ahybxonekd

Condition: used, Mosca RO-TRP-4 automatic strapping machine Features: • Can be integrated into any line • Direct conveyor system with frequency control, adjustable from 0.15 – 0.8 m/s • IFM Ecomat 100 control unit with display • Hot-sealing system with electronic heating control • Fully automatic strapping tape threading system • Adjustable strapping distance via the control panel • Adjustable strap tension • Detection of the end of the tape with ejection of the remaining tape • Automatic ejection of the strapping loops in case of incorrect strapping • Structure painted blue – RAL 5010 The passage opening is 74 cm wide and 53 cm high. Strapping capacity: Up to 46 straps/min. Electrical power: 400 V, 50/60 Hz, 3 phases Consumption: 1.5 kVA Weight: 300 kg. You can find more items in other sizes – new and used – in our shop! International shipping costs available upon request! Gkodpfet Srxgox Aanjd

Condition: ready for operation (used), Year of construction: 1990, operating hours: 160,857 h, functionality: fully functional, machine/vehicle number: 396, type of input current: AC, input voltage: 400 V, compressed air connection: 8 bar, sheet thickness aluminum (max.): 80 mm, pressure: 16 bar, film width: 560 mm, roll diameter: 1,200 mm, overall weight: 3,000 kg, input current: 48 A, heating capacity: 19.4 kW (26.38 HP), Equipment: cooling unit, documentation/manual, ILLIG RV 53 Thermoforming Machine + a cooling unit – PS, PVC, PET & Other Thermoplastics The machine is suitable for the production of thermoformed products from PS, PVC, PET and other thermoplastic materials. Godpfx Asz Hi Iljanskd The machine has been regularly maintained and well cared for throughout its operating life. It has only been used for approximately a few hours per day on average, resulting in relatively low operating hours for a production machine of this type. The machine is still in operation, allowing prospective buyers to inspect it under working conditions. A live demonstration is available by prior appointment. This is a good opportunity to acquire a well-maintained ILLIG RV 53 thermoforming machine with the advantage of being able to inspect and test the machine in actual production before purchase. Further technical specifications, photographs and additional information are available upon request.

Condition: reconditioned (used), Year of construction: 2002, functionality: fully functional, Automatic pallet strapping system KZD-311 with strapping head model KSR The system is designed for strapping the following package dimensions: Product to be strapped: empty cans stacked on pallets Pallet dimensions Length min. 1,250 mm max. 1,450 mm Width min. 1,120 mm max. 1,150 mm Height 145 mm clear height 80 mm for passing the strap guide tongue Top deck height 22 mm Overall dimensions including pallet Length min. 1,250 mm max. 1,450 mm Width min. 1,120 mm max. 1,150 mm Height min. 1,000 mm max. 3,000 mm Weight min. approx. 150 kg / pallet max. approx. 350 kg / pallet Top deck support: wooden frame, length x width = pallet dimensions Interlayers made of solid cardboard or hardboard: Length 1,250 mm – 1,450 mm Width 1,120 mm – 1,150 mm Thickness each 1 mm System dimensions Height of the strapping system from floor level to column top 4,600 mm Clearance height to top mounting plate 3,360 mm Overall width 5,330 mm Clearance width 1,860 mm Length of the pressure plate 663 mm Pressing force adjustable 0 – 1,000 – 2,000 – 3,000 N via selector switch Drive of the pressure plate via geared brake motor Pressure plate speed 135 mm/s Technical data Strapping head model KSR Strap tension continuously adjustable 200 – 2,000 N Strap feed speed 4.6 m/s Closure principle: long friction welding closure Head arrangement: lateral Travel distance to the package max. 500 mm End switch actuation: head on the package Electrical data Operating voltage 3/N/PE, 400 V, 50 Hz Control voltage 24 V, DC Total connected load 4.5 kVA Performance Number of pallets per hour approx. 15 (3.5 minutes per pallet) Number of straps 2 x transverse / 2 x longitudinal 3 x transverse / 2 x longitudinal Paint finish Paint finish of the system: RAL 5010 – Gentian Blue Paint finish of the control cabinet: RAL 7035 – Light Grey Paint finish of the protective grid: RAL 1023 – Traffic Yellow Strapping material Quality of the strapping band: PET / PP, set to PET, type KE 1200 A – GR – MF Width of the strapping band: 12.0 mm x 0.5-1.0 mm (band thickness can be adjusted) Main components • System base frame with welded support column and guide rails for the lifting carriage • Lifting carriage with eccentric rollers • Rack • Pinion • pole-switchable geared brake motor • complete plastic strap guide • 1 holding-down pressure plate • Pressing force 0 N – 1,000 N – 2,000 N – 3,000 N • 2 flap openers • proximity light barrier for height pallet detection • electrically driven traversing carriage for the strapping head, stroke = 500 mm • electrically driven strap guide tongue • automatic strapping head model KSR with strap tension compensation • strap unwinder, model KA-400-E • freely programmable Siemens S7 controller with CPU 314 / OP 7 • cable length from system to control panel = 5.0 m • lifting carriage always returns to the home position after strapping • operation via switches, buttons and illuminated push buttons (OP 7 only for text display) • error messages via plain text display Siemens OP 7 • strap tension – digital display via plain text display Siemens OP 7 • potentiometer for strap tension control in the control panel cover Gjdpfxe Ai Ui Dj Aanekd • strap retraction via frequency inverter • protective grid, complete • panel labeling: German • wiring diagram: German • documentation 2 copies, German

Condition: good (used), Year of construction: 2010, Secomak Shrink tunnel Gkedpfx Asyw S Tdsansd Serial: 6905 2010, Stainless shrink tunnel, adjustable temp controls, max product 160mm w x 360mm h, 3Ph

Condition: good (used), Mechandling 579 Rotation reel gripper lifter Gedpfx Aez It E Doanjkd 2009, Stainless, ultra powered rotation reel gripper, mobile, 12V

Condition: ready for operation (used), Quantity 4, Nordson Durablue 4 Hot Melt Pumps Each with one hand held glue spray gun Power 240 volt Gksdpfe Agcyvex Aansd In excellent condition

Condition: used, functionality: fully functional, Industrial hot melt adhesive applicator with an automatic adhesive refill system for supplying adhesive application systems in automated packaging lines. Manufacturer: Nordson Corporation Model series: ProBlue Type: P10 4H Fulfill Tank capacity: 10 liters (Type P10) Number of hose connections: 4 (Type 4H) Adhesive supply: ProBlue Fulfill, automatic refill system Supply voltage: 200–240 V AC, 50/60 Hz, 3-phase Gsdpo Akdvvsfx Aanjkd Alternative mains supply according to nameplate: 400/230 V AC, 50 Hz, 3-phase with N/PE Rated current: 27 A Compressed air connection: Max. 3 bar (marking on the device) Operation: Integrated digital control panel with temperature display and foil keypad Temperature control: Electronic Maintenance: Maintenance sticker from Nordson available, last documented maintenance in May 2020 Condition: Used, with visible signs of wear The device is part of a complete packaging line for (frozen) bakery products. Upon request, the entire packaging line is also available.