Year of construction: 2010, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 101258050, Submission of a bid constitutes an obligation for timely collection no later than 31/12/2025! The offer includes: Bacciottini Pit Stop WFD2H Speed (Serial number: WFD2H 1010, Year of manufacture: 2010) MB PFNET 52/4-40-ART52 (Serial number: 101258050) TECHNICAL DETAILS Number of pockets: 4 EQUIPMENT 2-bar scoring system Inline Extended feeder MB folding machine Hpedpfjxyh E Ssx Agwoa Gatefold pocket Delivery

Year of construction: 2022, condition: used, Technical data: Maximum parent roll width: 1420 mm Minimum parent roll width: 600 mm Maximum parent roll diameter: 1500 mm Maximum parent roll weight: 2500 kg Maximum unwinding tension (Ø1500 mm): 600 N Minimum unwinding tension (Ø1000 mm): 40 N Minimum standard slitting width: 100 mm Maximum rewinding width: 1400 mm Maximum rewinding diameter: 1050 mm Maximum rewinding weight: • Ø76 mm shaft: 600 kg • Ø152 mm shaft: 1000 kg Maximum rewinding tension: 600 N Maximum production speed: 600 m/min Power supply: 3 x 400V 50Hz Installed power: 30 kW Compressed air: 6 bar, dry Compressed air: 5–40°C Noise level: 82 dB(A) Color: Grey RAL 7035 Materials to be slit: • Paper-/liner-based packaging laminates. • Board from 80 to 300 g/m². Unwind section: A separate between-centers unwinder, type T9, 1500 mm diameter, including: • Hydraulic cylinder for lifting parent rolls from the floor. • Two motors driving the unwind roll, controlled by an ultrasonic diameter sensor and a tension-control dancer roller. • Two pneumatic expanding adapters, SVECOM, for 70/76 mm (3") cores. • Two pneumatic expanding adapters, SVECOM, for 150/152 mm (6") cores (mounted on the pneumatic end adapters). • Floating edge-correction roller. • Automatic web guiding system, FIFE DP20, with SE26A photoelectric sensor, ±100 mm correction via electric actuator — for controlling sheet edge or continuous printed line. • Connecting walkway, enabling web threading at floor level while maintaining full access to the slitting station. • All web path rollers are anodized. • Safety guarding for operator protection. Slitting section: A slitting station with individual pneumatic knives and circular counter-knives: • Shear cutting performed against the counter-knives. • Counter-knife shaft driven by an independent motor; counter-knife shaft is pneumatic. • Pneumatic knife holders mounted on a beam with dovetail guide (TIDLAND) and an air supply manifold for individual activation. • 10 slitting sets, each including: Individual TIDLAND pneumatic knife holder (25 mm width) and double-bevel circular knife Ø 90/60 mm. • Set of multi-groove counter-knife rings, 5 mm pitch, 50 mm length. Web separation section: • Separator roller, driven by the slitting motor; angle and curvature fully adjustable. Lay-on roller: • Lay-on roller made of anodized ground aluminum or polyurethane (depending on processed materials). • Pressure is adjustable and synchronized with the winding diameter. • Roller is removable. Automatic splicing / transverse cutting system: • Hydraulically operated pivoting arm including a linear transverse knife and backing plate for securing the web to new cores. Hpedpexx Tbcsfx Agwja Trim extraction system: • Trim suction unit with two width-adjustable nozzles. • Turbine enclosed in a sound-insulated cabinet, conveying trim to a central system or container (not included). Rewinding section: • Motorized turret (two-position) with two rewinding shafts. • Rewinding shaft drive via oversized asynchronous motor. • Hydraulic centering point for the active rewinding roll. • Two pneumatic expanding shafts Ø76 mm (3”), max load 600 kg each, featuring full-width rubber strips with individual bladders. • Two pneumatic expanding shafts Ø152 mm (6”), max load 1000 kg each, also equipped with full-width rubber strips and individual bladders.

Condition: ready for operation (used), A cutting and winding machine Olbricht is available. Documentation available. An on-site inspection is possible. Expected to be available from the end of January. Hpedsxwyvwjpfx Agwoa

Condition: reconditioned (used), Year of construction: 2000, functionality: fully functional, overall weight: 2,000 kg, total length: 4,000 mm, total width: 3,000 mm, total height: 1,500 mm, Slitter Rewinder, can be used with a contact roller rewinding system or as a standard non-contact rewinder, depending on the substrate and required web tension. - In use until 2000, then comprehensively modernized - Modified electrical control equipment with Siemens S7 PLC - Modified winding drives with Commander SE CT control, both individually adjustable - Reversible drive direction for winding drives - Working width 650 mm with BST edge guiding, 700 mm without BST edge guiding - BST edge guiding with pneumatic detection - Max. rewind diameter 500 mm; 2 pcs. 3" rewind shafts - Max. unwind diameter 1000 mm; 1 pc. 3" unwind shaft - Pneumatically controlled unwind brake - Slitting system: circular knives (3 units available) - Running metre counter Hengstler - Main drive, electrically adjustable speed - Machine speed 150 m/min (200 m/min) - Display of winding tension in % - Software file for Siemens S7 PLC available - Parameter file for drive control available - Power supply 3 x 400 VAC / 25 A / 3P+N+GND - Compressed air 6 bar Hpjdpfx Asxbyf Hjgwja - Suitable for paper, film, aluminium etc. - Required space at least 4 x 3 m - Machine is dismantled and ready for shipment - Sale as seen - Packaging: • on wooden pallets - Delivery: EXW Switzerland CH-9008 St. Gallen - Dimensions of unwinder (without slitting unit): • Width: 170 cm • Length: 220 cm • Height: 110 cm • Weight: 490 kg - Dimensions of slitting unit (without unwinder): • Width: 230 cm • Length: 140 cm • Height: 140 cm • Weight: 1490 kg - Control panel (including accessories): • Width: 70 cm • Length: 120 cm • Height: 120 cm • Weight: 240 kg

Year of construction: 2003, condition: not inspected (used), Hello, I sell a rotary die-cutting machine for the production of corrugated cardboard packaging with sloter function of Polish production PRYMAT. The machine has 2 sections flexographic printer, creasing and punching sections and vacuum feeder. Max format 2400/1400, printing area 2200/1360. It makes cardboard boxes from 3 and 5 layer cardboards. Hedpfx Agsu A I Tvowjpa

Condition: good (used), Year of construction: 1979, Packing aid for folder-gluer machines Japack 40-1 Hsdpfxjw H N U Rj Agwepa Box length: 80-535 mm Box width: 50-400 mm Standard, motorized curve on the right / back-up conveyor with vibrator, contactless proximity switches, laser counter, motorized height adjustment, packing pattern: 1-4 rows/layers, resulting in 16 possibilities. Overhaul 2025: cleaned, inspected, painted, new belts.

Year of construction: 2002, condition: ready for operation (used), functionality: fully functional, infeed width: 720 mm, Placing a bid obligates the buyer to collect the equipment on time, no later than 31/12/2025! The offer includes: - MBO R 700 Feeder (Serial no.: 0722420, Year: 2002) - H+H M7.35 Folding Unit (Serial no.: 1543, Year: 2002) - H+H M7.35 Folding Unit (Serial no.: 1544, Year: 2002) - H+H M7.35 Folding Unit (Serial no.: 1545, Year: 2002) - MBO SBAP-46-ME Vertical Delivery (Serial no.: 90020602, Year: 2002) - H+H 148/2 Transfer Unit (Serial no.: 820-411, Year: 2002) - Bickel SGU Die Cutter (Serial no.: 033, Year: 1997) - MBO 3-Up Delivery for SAP 66-ME (Serial no.: 910913362) - Polar L-1000-W-3 Pallet Lift Table (Serial no.: 6072421) Hpodpfxsxyhnye Agwea TECHNICAL DETAILS Fold Plates Fold plates 1st folding unit: 6 (individually driven, removable sheet transfer) Fold plates 2nd folding unit: 6 Fold plates 3rd folding unit: 2 Infeed Width Infeed width 1st folding unit: 720 mm Infeed width 2nd folding unit: 720 mm Infeed width 3rd folding unit: 520 mm This machine comes with a gate fold plate (usable in units 1 and 2), as well as 2 separate sheet diverters and 1 auxiliary frame for setup. Units 2 and 3 are electrically height adjustable! Note: The MBO delivery unit is defective.

Condition: used, Year of construction: 2016, Technical data Film width: 1350 mm Unwinder: Shaftless, servo-driven, Ø1000 mm Rewinder diameter: Ø610 mm Hsdsxxm E Uepfx Agwopa Speed: up to 400 m/min Slitting system: Rotary & razor blades Additional features: Banana roller, trim exhauster

Condition: used, Year of construction: 1990, functionality: fully functional, Offer Title: Bobst Domino 100 Folding Machine Manufacturer: Bobst Model: Domino 100 Technical Condition: Good 3-point gluing Features: Hpjdpfx Agsx An Daswea - Cold glue system - Lower disc: 5 mm - Two (2) glue guns - Two (2) main gauges - Valco channel control with high-pressure pump - Remote control for the operator

Condition: excellent (used), functionality: fully functional, SIMPLACUTTER (CAUHE) IV – 1680x1160 Machine little used, in very good condition Equipment: – Pneumatic clutch and brake – Console – Heated plate – 3 working modes: single, continuous, time-delayed opening – Centralized lubrication Hjdpouwru Hefx Agwspa – Additional safety guards – Working tools – Hard pressure plate

Condition: good (used), working width: 2,500 mm, type of input current: three-phase, input voltage: 380 V, Bending machine for the production of corrugated cardboard packaging. 4 creases 3pkt ( regulation of height of each crease separately), 1 pair of knives for cutting.The machine has 5 shafts Hsdpfx Aot Syrbogwjpa

Condition: excellent (used), Year of construction: 2003, Size: Box length: 80-535 mm Box width: 50-500 mm Equipment: Standard version, laser counter, right-hand turning, - possible left-hand turning Hpodew H N Spjpfx Agwsa Types of packaging: 1-point packaging, 4-point packaging (min. side height 40 mm), 6-point packaging (max. 400 g/m²) Packaging material: 200 - 600 g/m² Packing scheme: 1-5 rows side by side, 1-5 layers stacked, Depending on the box type, up to 7 layers are possible Performance: up to 200,000 boxes per hour, cleaned, tested Overhaul 2023: all worn parts replaced The machine can be relocated quickly as speed is taken from the encoder. Machine changeover takes 5 minutes. - Possible installation at customer site by our operators with commissioning warranty +2500 EUR + travel costs, to be agreed individually - Additional set of new belts

Year of construction: 2008, condition: ready for operation (used), functionality: fully functional, infeed width: 520 mm, Submission of a bid requires collection by the deadline of 31/12/2025! The offer consists of: Feeder F530 mobile (Serial number: 95080104, Year of manufacture: 2008) Folding unit H + H M7.32 (Serial number: 253/08, Year of manufacture: 2008) Delivery unit H + H 271 (Serial number: 246/08, Year of manufacture: 2008) Transfer unit H+H 246/08 (Serial number: 850.3-363, Year of manufacture: 2008) Knife H+H XS 300/6 (Serial number: 253/08, Year of manufacture: 2008) Small format feeder H+H (Serial number: 204/91 272-0085, Year of manufacture: 1991; bottom suction) Small format delivery Stahl STA30F (Year of manufacture: 1990) TECHNICAL DETAILS Feed width folding unit: 520 mm Hpjdpfx Agexyhg Aewoa Number of pockets folding unit: 12

Condition: used, Year of construction: 2018, Technical data: Maximum material width: 1350 mm Web guiding system: Optical sensor (control by print mark) Hedpfxoxxmuvj Agwspa Slitting technology: • 8 rotary knives • 8 razor blades Edge trim extraction: fully functional Knife/blade adjustment: Manual

Condition: good (used), Year of construction: 2012, ETERNA PE 1620 SA - ELITE Year: 2012 Max. Size: 1620 x 1200 mm Max. Cutting Force: 400 t Hodpfx Agexpnrwjwopa Max. Speed: 3500 sheets/h Centerline QuickLock System Chaseloader

Condition: good (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 7555605, Max size: 60 x 41 cm, integrated feeder SE - 18.2, cross-web paper cutter ST - 18.2, die cutting unit D - 18, strapping/banding unit PB - 18.1, horizontal and vertical strapping. Paper width min. 35 x 45 mm, paper width max. 405 x 600 mm. Stacking height min. 30 mm, stacking height max. 100 mm. Machine no.: 7555605 Hpsdpjxc Uv Asfx Agwsa

Year of construction: 2012, condition: ready for operation (used), A Cevenini roll slitting machine for adhesive tapes and foam adhesive tapes is available. Carrier width range: 0.4mm-280mm, knife diameter: 300mm, knife profile: B, max. mother roll width: 1600mm. Including various accessories such as grinding stones, pressing device, clamping jaws, etc. Documentation available. An on-site inspection is possible. Hpjdpfxjxvrups Agwea

Condition: used, Jagenberg Diana 125 Folder Gluer 4-6 point operational Hsdow H Rbfepfx Agwopa

Year of construction: 2011, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 309002, No minimum price – guaranteed sale to the highest bidder! Hjdpfxsxygdmj Agwspa By placing a bid, you commit to collecting the item by 31/12/2025!

Condition: used, Year of construction: 2008, Technical data: Working Width: 1300 mm Maximum Speed: 550 m/min Unwinder Type: Shaftless Maximum Unwinder Roll Diameter: 1000 mm Rewinder Type: Double shaft, center-driven Maximum Rewinder Roll Diameter: 650 mm Minimum Slit Width: 35 mm / 25 mm (optional) Processed Materials: PP, PET, LDPE, HDPE, paper, and laminated materials Knife Types: Blade slitter and rotary knives Control System: Touchscreen HMI with web monitoring and recipe management Additional Features: • Automatic knife positioning system • Shaftless unwinding with hydraulic tilting arms • Laser core guiding for precise and quick setup Hedpfxexxmr Uo Agwspa • Modular design for easy maintenance and access

Condition: used, Year of construction: 1989, Jagenberg Diana 65-1 folder gluer, production year 1989. Hjdow H Rc Nopfx Agwjpa - Straight line gluing - 3-point gluing, crash lock, lock bottom - KQ glue system with 4 guns - Machine cleaned, in production – can be inspected upon request, in very good condition

Year of construction: 2011, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 338002, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates timely collection by 31/12/2025! Hpodpfx Agjxyf T Tswja EQUIPMENT 6 folding pockets, electrically adjustable Altar folding pocket

Year of construction: 2002, condition: ready for operation (used), functionality: fully functional, infeed width: 530 mm, machine/vehicle number: U07/77, Bidding obligates the buyer to collect the equipment by 31/12/2025! The delivery and the knife folding unit feature as-new conveyor belts! The offer consists of the following components: Folding machine T530-53/6F (Serial No.: U07/77), 2nd folding unit (Serial No.: 550000395), delivery unit ASP66-2ME (Serial No.: 0722398), knife folder T530-3-X (Serial No.: U07/77). TECHNICAL DETAILS: Feed width: 530 mm. Pockets in 1st folding unit: 6. Pockets in 2nd folding unit: 4. Hedpoxyfvuofx Agwjpa

Year of construction: 1999, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 126375/99-274723, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates timely collection by 31.12.2025! The offer includes: Stahl Zi52/4-Fi52 (year of manufacture: 1999; serial number: 126375/99-274723) Stahl KBK 52 (year of manufacture: 1999, serial number: 121492/99-271702) The folding rollers of the machine have been replaced. The machine is manually adjustable. Hpedpfx Agjxyfmaowsa

Year of construction: 2006, condition: repair required (used), functionality: not functional, machine/vehicle number: 059061003, No reserve price – guaranteed sale to the highest bidder! Bidding obligates timely collection by 31/12/2025! The offer includes: MBO T800.1/642/R (year of manufacture: 2006; serial number: 059061003) MBO Z-2 knife folding unit (year of manufacture: 2008; serial number: 82 06 10 09) Hpedpfx Agexyfagswsa MACHINE DETAILS Electrical specifications Mains voltage: 400/50 V3~ / Hz Control voltage: 24/25 V – / A Current consumption: 2.5 A Fuse rating: 16 A Note: Only units 2 & 3 as well as the knife folding unit are available. There is a defective electronic component at the delivery section. The feeder is missing.