Condition: good (used), Year of construction: 2002, functionality: fully functional, Unskilled operators can be trained in a day Automated Die-Cut work is fully stripped, stacked and counted for ease of operation Change from Micro Flute to Double Wall quickly and easily Cut to print +/- 1mm No need for separate stripping tools Ibsdpfx Aovrv Nmjh Usf Waste board is automatically removed without employing additional labour Die-Form change takes less than 5 minutes Run Micro Flute up to Double Wall corrugated • Multiple outs FULLY stripped with NO tagging • Operator safe and friendly machine • Large sheet size 1.7m x 1.4m • Now faster, up to 1800 sheets per hour cycle speed with one operator. • Ideal for complicated parts fully stripped, no tags • Highest quality die-cutting and creasing • Cuts up to 9mm double wall corrugated • Runs warped board with ease • Job change and set up in minutes • Low tooling cost • One operator only • Precise cut to print registration • Compact design for space saving • User-friendly controls • Low maintenance • No make-ready necessary Cycles/hour 1800 Sheet size (max) 1700 x 1400mm Board max thickness, micro-flute up to 9mm D/W

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: TK3S55321812104, type of input current: three-phase, cutting width (max.): 5,500 mm, section length (max.): 3,200 mm, TECHNICAL DETAILS Cutting Table Frame: High-precision welded frame Work Surface: Fixed Vacuum Bed: 30-zone vacuum bed Vacuum Pump Control: Available Camera for Mark Recognition: Available Cutting Head: Single cutting head Included Tools: Pen, drag knife Additional Included Tools: Drag knife, driven rotary tool (for fabric cutting blades) Drive and Control Electric motor, guide rail, and cutting support: Available Control system: Available Conveyor System Conveyor system: Belt conveyor system, allows for automatic feeding and continuous cutting Loading Device Loading device for roll material: Available Computer Workstation Ibsdjw Sm S Njpfx Ah Uef PC included: Available Ergonomic desktop computer workstation: Available Emergency stop button: Available Tool holder: 5 slots for various cutting tools EQUIPMENT Brand new belt available Camera for cut mark recognition available Roll material loading device available Belt conveyor system available Ergonomic PC workstation available Emergency stop button available Tool holder available PC available A relocation and re-installation service can be arranged and will cost approximately EUR 3,000.

Year of construction: 2017, condition: used, functionality: fully functional, Fully automatic core cutter including core magazine The machine is for sale due to replacement with a new model. It remains operational and installed, and can be inspected and demonstrated by appointment. Technical data: • Machine type: Fully automatic core cutter with magazine • Model: AKG–2000 • Purpose: Cutting cardboard cores • Core inner diameter: 30–152 mm • Max. core wall thickness: 12 mm • Min. core wall thickness: 2 mm • Max. core length (loading length): 2000 mm • Min. core length: 1000 mm • Max. cutting length: 1200 mm • Min. cutting length: 12 mm • Min. remaining core length: 50 mm • Number of cutting blades: 1 • Power supply: 3x400 V / 50 Hz / EU plug / 4 kW • Compressed air supply: 6–8 bar • Core magazine capacity: 20 cores, each 76.2 mm • Control panel size (HMI): 4'' touch screen • Drive: Bosch Rexroth (4-axis servo) • Certification: CE Machine operation: The automatic core cutter allows your cardboard cores to be cut while the operator attends to other tasks. The core length, dimension, and quantity to be cut are entered via the control panel. The core magazine is then loaded with 2 m long cores and, with the push of the start button, the machine processes the job automatically, without the need for operator intervention or supervision. This significantly reduces the variety of cores needed in inventory, saving on storage capacity and costs. Ibodpfx Ahoxgh Sre Uof Our automatic core cutter features a Bosch Rexroth 4-axis servo drive, addressing all requirements of small to medium-sized businesses with minimal investment. Custom software requirements can be accommodated. Production jobs can be entered either manually via the control panel or via USB stick. Jobs can be saved and recalled as needed. For optimal service, the machine is equipped with an Ethernet port for diagnostics and rapid troubleshooting. A set of core adapters is included with the machine; additional adapter sizes are available upon request. The corresponding settings for core diameter changes must be carried out by the machine operator. Available adapters for core inner diameters: 30 / 50 / 70 / 76 / 150 / 152 mm

Condition: used, Year of construction: 1973, The Heidelberg OHT, manufactured by Heidelberg in 1973, is a robust machine designed for printing and die-cutting operations. With a format of A4, it is currently in storage in Germany. Identified by the machine number T 184634 H, this press has a punching force of 40 tons and can handle a minimum format of 40 x 70 mm. It operates at a speed ranging from a minimum of 2,200 revolutions per minute to a maximum of 5,500 revolutions per hour. The machine includes a skeleton chase of 260 x 350 mm and a standard chase of 260 x 340 mm, with a maximum format of 260 x 380 mm. It comes complete with accessories and a closing frame, and features a letterpress platen and a die-cutting platen. The delivery condition is FCA. Format: A4 Speed: 5500 Power: 380 V 1,25 KW Net Weight: 1100 KG Measurements: L1,68 x B1,24 x H1,85m Isdpjvfxu Eefx Ah Uobf Equipment: Skeleton chase: 260 x 350mm Speed min.: 2.200 sph - max. 5.500 sph Size max. 260 x 380 mm Letter Press Tiegel - DIE Cutter Punching force 40 tons Size min.: 40 x 70 mm Complete with tools and accessories include frame Standard chase: 260 x 340mm Machines No T 184634 H

Condition: used, Year of construction: 2018, Casemaker EDF Europe 8/21 Introduction 5 colors Automatic slitter Rotary die cutter Folding gluer Counter ejector Ibedpfoxz Aizox Ah Usf

Condition: like new (used), Year of construction: 2016, operating hours: 100 h, functionality: fully functional, Kohman Starlet 620 Straight line folder gluer to sale. The Machine is new, only tested never used in production. Isdpfx Ahoxyw H So Uebf

Condition: excellent (used), functionality: fully functional, Year of construction: 2011, Coating, laminating – additional unwinder for lamination Corona treatment – during coating of film with water-based dispersions Working width – 1700 mm Coating speed – 0–100 m/min Material in rolls Ibjdexwaikjpfx Ah Ujf Raw material – paper (50–300 g/m²), film (0.023–0.10 mm) Substances – solvent-based adhesive, water-based adhesive Type of coating – coating head: Mayer rod, anilox roller, slot die roller Dryer – length 18 m, 7 drying sections, temperature 30°C–170°C, gas drying (blower) Roll diameter – max 1400 mm Machine includes hot air generator Detailed description available on request.

Condition: used, Year of construction: 1969, functionality: fully functional, Die-cutting platen, format 117 cm x 83 cm, with manual feed. The machine can be tested on site. Ibsdpfx Asxn Rldsh Uof

Year of construction: 1985, condition: good (used), Bobst SP 130 E Ijdpfx Asif Ed Deh Ujbf Year 1985 Max.size: 920x1300 mm Min.Size: 450x580 mm Max.Speed: 7000 Sh/h Max. cutting force Cutting force: 500 T Centerline Immidiately available.

Condition: used, Year of construction: 2018, Casemaker EDF Europe 8/21 Introduction 5 colors Automatic slitter Rotary die cutter Folding gluer Counter ejector Ijdpfx Asxz Ai Ijh Uobf

Year of construction: 1987, condition: good (used), Bobst SP1600 E Year 1987 Max. size: 1115 x 1600 mm Min. size: 600 x 850 mm Isdpfsr Dfi Rsx Ah Uebf Max. cutting force: 750 T Centerline Non-Stop Chain and all Gripper as new.

Year of construction: 1990, condition: excellent (used), Diana Jagenberg 115-3 year:1990 -straightline -lockbottom -4 corner -6 corner -vibrator Iodpei Uqzfofx Ah Uobf -kicker -counter -pre breaker without electronic gluesystem

Condition: good (used), Year of construction: 1995, Stock drum bucket + press belt Ibedpfx Ahsu Uclus Ujf Type: SFAM 712_G Year: 1995 Max. size: 1650mm Press belt Tünkers

Condition: like new (used), functionality: fully functional, Year of construction: 2016, Die cutting machine IBERICA OPTIMA 106 Year 2016 Max.Speed: 9,000 Sh/h Max.Size: 760x1050 mm Min.Size: 350x400 mm 10900 running hours Max.Cutting force: 300 T Min.Paper: 90 gsm Iedpfx Ahewb Ag Ns Uebf Max.Paper thicknes: 1.5mm QuickLock system Centerline Non-stop in production

Condition: excellent (used), Year of construction: 2002, ANTER 800 year 2002 – serial Nº 576/632 straightline boxes, lockbottom boxes, 4 corner boxes Max. size: 800mm; min. size: 106mm Max. length box: 650mm, min. Length box: 60mm Material: cardboard from 200gr/m2 up to 600gr/m2 Speed: Up to 350m/min. Cold glueing unit PAFRA with 2 guns Semiautomatic packer VESTAPACK year 2001, nº 507 Ibjdowb Ur Ropfx Ah Ujf

Condition: good (used), Year of construction: 1988, FOLDERGLUER MACHINE JAGENBERG DIANA 90-1 Year 1988 - Serial Nº 10.44608 Styles: straightline boxes Material: Cardboard 200gr/m2 – 800gr/m2 Max. size: 915mm, Min. size: 75mm Speed: up to 450m/min. Cold gluing unit HHS with 2 guns Box counter + kicker Tuck in unit Power requirement: 27kW Electrical installation: 380V Total length: 12.8m Total width: 1.5m Weight: 6,500Kg Iedpfxov N Uu Ae Ah Usbf Machine in production and in good condition Availability: Location: Europe

Condition: excellent (used), Year of construction: 2012, IBERICA OPTIMA 105 Year 2012 Max.Speed: 9,000 Sh/h Max.Size: 760x1050 mm Min.Size: 350x400 mm Ibsdpfx Ahswdnrvs Uof 10900 running hours Max.Cutting force: 300 T Min.Paper: 90 gsm Max.Paper thicknes: 1.5mm QuickLock system Centerline Non-stop in production

Year of construction: 1987, condition: good (used), functionality: fully functional, Asitrade Singlefacer E-Flute and B-Flute Ibedetxlv Hjpfx Ah Uof Year: 1987 - completely overhauled in 2019 Unwinder: 6-stations Max. working width: 1410 mm Max. speed: 150 m/min Sleeve: 100-140 mm Diameter: max. 1300 mm Water spray

Condition: good (used), Year of construction: 2000, Max. Sheet format. 1420 x 1620 mm Min. sheet format: 500 x 500 mm - with MIRUS sheet feeder, type HSII - Suction belt sheet feeder, type 4R - Press belt, type 5 - Package turner (forks) with non-stop device, type 8 - Pile stacker with non-stop roller carpet, type 7 Technical data: Working width: 1500 mm Max. Sheet width: 1420 mm Max. Sheet length: 1640 mm Lamination tolerances: +/- 1.5 mm Iodpfx Ahjtru Hzj Uebf Material thickness: - Carrier material from 0.6 - 7 mm. Single-sided corrugated board only runs through the machine with a stationary flute. - An additional needle bar is required for cardboard of approx. 400 - 500 g/m². is required. - Cover sheet from approx. 180 - 400 g/m². Deviations possible depending on material properties.

Condition: good (used), Year of construction: 1987, functionality: fully functional, Bobst SP 142 ER Year 1987 Max. Size: 1020x1420 mm Ibodevhcgqspfx Ah Usf Min. size: 700x520 mm Max. Speed: 6000 Sh/h Max. Cutting force: 600 T Centerline Micrometer setting in production

Condition: like new (used), Year of construction: 2016, functionality: fully functional, working width: 2,050 mm, Stock laminating machine Ibsdpfxeuwntre Ah Uef Type: A-14R55A6L7N8N/2050P Year 2016 Max. size: 2050 x 2050 mm Min. size: 500 x 500 mm Print sheet thickness: 100-800 gr. Tolerance: +/- 0,5mm Carrier sheet thickness: Cardboard from 350 gr. (0.5 mm upwards) Corrugated board up to 7.0 mm Solid board up to 2.5 mm - Flush laminating machine - Pile turner

Condition: excellent (used), Year of construction: 2000, ANTER 1100 Year 2000 Styles: straightline boxes, lockbottom boxes, 4 and 6 corner boxes Material: Cardboard from 200gr/m2 – 600gr/m2; Corrugated board E flute Max. width size: 1100mm, Min. width size: 106mm Max. box length: 850mm, Min. box length: 60mm Speed: up to 350m/min Cold glueing unit PAFRA with 3 guns Wired remote control Power requirement: 30kVA Ibodpfxov N T Hqe Ah Ujf Electrical installation: 380V Total length: 12,875m Total width: 1.57m Weight: 5,830Kg Machine in production and in good condition Availability: Location: Europe

Year of construction: 1970, condition: good (used), Bobst SP 1650 E Max.Size: 1150 x 1650 mm Min.Size: 570 x 850 mm Ibsdpoht Rn Iefx Ah Uof Max.Speed: 4500 Sh/h Year 1970 In good production condition.

Condition: excellent (used), Year of construction: 2004, VEGA PEGASSO 145 Production year:2004 Kind of boxes: straight line / crash lock bottom / 4 corners / 6 corners / doble wall boxes Materials: cardboard gr 200 - 800 / corrugated board ( waves: E-F-N-B ) in production actually Available in end of September2024 Isdpjullg Defx Ah Usbf

Condition: good (used), Year of construction: 2011, LAMINA GLUELINE 3200 GL - Year of construction:2011 - Sheet size min.: 500 x 700 mm* - 2x - Sheet format max.:1600 x 1600 mm* - 2x Isdpeuvh Rtefx Ah Ujbf - Output:up to approx. 1000 pcs/h - Material types: F, E, B, C, CB, EB and EE flute, 1-piece and 2-piece bases - Glue type: Hot-melt (2-hot-melt valves) - Application type: Bead - Stacking height incl. pallet: all heights possible (delivery specifications)