Condition: good (used), Year of construction: 2014, operating hours: 35,000 h, functionality: fully functional, ETERNA 1620 SAL Extra ref 2950 year 2014 maximum sheet size: 1200 x 1620 mm material: Corrugated board Fala E, B, EB, BC Crodpfx Asytum Rjaaoa vacuum feeder extended feeder with sheet alignment section – mechanical register cleaning section batch delivery clamping force: 400 tons

Year of construction: 2010, operating hours: 33,000 h, condition: excellent (used), Sanwa TRP 1060 Axia ref 2962 year 2010 max sheet size 740 x 1060 mm operating hours – 32,000 h cleaning section NON Stop at feeder register control R, L Credpfx Aaoytudcsaoa motorized impression setting

Condition: excellent (used), functionality: fully functional, Year of construction: 2011, Coating, laminating – additional unwinder for lamination Corona treatment – during coating of film with water-based dispersions Working width – 1700 mm Coating speed – 0–100 m/min Material in rolls Raw material – paper (50–300 g/m²), film (0.023–0.10 mm) Substances – solvent-based adhesive, water-based adhesive Type of coating – coating head: Mayer rod, anilox roller, slot die roller Dryer – length 18 m, 7 drying sections, temperature 30°C–170°C, gas drying (blower) Roll diameter – max 1400 mm Machine includes hot air generator Detailed description available on request. Crjdoxwaikspfx Aaaja

Condition: excellent (used), Year of construction: 2002, Maximum jumbo roll width 1300 mm Jumbo roll diameter max 1000 mm (1200 mm without splice table) Winding diameter max 600 mm Operating speed 300 m/min Cutting width possible from 20 mm Year of manufacture 2002 Accessories: - 1 unwind tension shaft D 76 mm - 2 friction winding shafts D 76 mm - 10 upper and lower knives - 1 edge guiding system - 1 cutting table Crsdpfx Aexyihnjaaea - 1 extraction system for edge trims - silicone-coated guide rollers, suitable for adhesive tapes - with documentation

Condition: used, 2400x1650 Vacuum feeder N° 2 bottom printing unit Cjdpfx Aoyv E S Roaasra Rotary die cutter Stripper Stacker unit

Condition: excellent (used), Year of construction: 1977, functionality: fully functional, machine/vehicle number: 210927, total width: 2,000 mm, total length: 15,000 mm, total height: 1,400 mm, The machine is being sold because our company's processing division has been discontinued. This Jagenberg Diana gluing machine is the ultimate all-rounder for folding carton gluing. Most of our folding cartons had an open size between 14 and 30 cm, but with a maximum width of 125 cm, large formats are no problem either. The machine can handle straight-line, crash-lock bottom, as well as 4- and 6-corner gluing. It was operated in single-shift mode without any technical issues. We retrofitted the quality inspection system from hhs, which includes product type detection with an ejection station and glue application monitoring. All belts were regularly replaced. The electric motor has been completely overhauled with new windings. The machine's main drive is via a robust coupling system rather than belts, as is common with later models. The machine is user-friendly, with all units easily accessible. Its overall condition is excellent, with only age-related signs of use. If interested, we can provide a video via email. Cjdpfx Aasx R Sn Ieaora

Condition: used, Year of construction: 1988, BOBST Printing Machine with 4 bottom colors anilox cilinders 120l/cm and 80l/cm TRANSFER BOBST Cjdpfjv Ifpuex Aaajra FLATBED DIE CUTTER BOBST AUTOPLATINE SPO 1600, max format 1100 mm x 1600 mm / 43.3" x 63" with 4 Bottom Printing unit and transfer Bobst * Vacuum feeder * Die cutting section * Waste elimination section * Centerline II * High pile delivery with two lifting tables * Max sheet format: 1100 mm x 1600 mm / 43.3" x 63" * Min sheet format: 520mm x 600mm / 20.5" x 23.6" * Cutting force: 400 t * Materials: E, B, C, CB, BE flutes * Max speed: 6,000 sheets/hour Possibility to sell them separately

Condition: used, type of input current: three-phase, product width (max.): 1,600 mm, The machine is designed for slitting and rewinding of flexible materials such as plastic films, paper, laminates, adhesive tapes and foils. Technical details: - Working width: 1600 mm Crjdpoyy Rh Eofx Aaasa - Slitting system: razor blades / rotary knives - Materials: PE, PP, PET, PVC, paper, laminates - Input voltage: 400V / 3-phase

Condition: used, EUROLINE EL 310 / Euro-Inline 310 E Lead Edger feeder N 2 top printing units Automatic slotter with pre set Crodpsyhp Sqjfx Aaasa Rotary Die cutter units Folder Gluer Boundle system 3100x 1250 (1650 with skip feed)

Condition: used, Year of construction: 1984, Die-cutter Bobst SP 142-ER Year: 1984 Hours: 29.924 (on counter; real expected production hours around 60.000/70.000) Equipped with: - Stripping and Blanking Stations - Push Lay system - Non-Stop Feeder with manual change over bars - Non-Stop Delivery - Corrugated board feeder Codpfjr I Ipvox Aaaora - Quick locking Tooling in Stripper - Micrometric system Technical specifications: - Max cutting speed : 6.000 s/h - Max sheet size : 1420 x 1020 mm - Min sheet size : 700 x 500 mm - Cutting force : max. 600 T - Solid board up to 2.000 g/m2 - Corrugated board up to 4mm thick

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: TK3S55321812104, type of input current: three-phase, cutting width (max.): 5,500 mm, section length (max.): 3,200 mm, TECHNICAL DETAILS Cutting Table Frame: High-precision welded frame Work Surface: Fixed Vacuum Bed: 30-zone vacuum bed Vacuum Pump Control: Available Camera for Mark Recognition: Available Cutting Head: Single cutting head Included Tools: Pen, drag knife Cedpfow Sm S Nsx Aaaora Additional Included Tools: Drag knife, driven rotary tool (for fabric cutting blades) Drive and Control Electric motor, guide rail, and cutting support: Available Control system: Available Conveyor System Conveyor system: Belt conveyor system, allows for automatic feeding and continuous cutting Loading Device Loading device for roll material: Available Computer Workstation PC included: Available Ergonomic desktop computer workstation: Available Emergency stop button: Available Tool holder: 5 slots for various cutting tools EQUIPMENT Brand new belt available Camera for cut mark recognition available Roll material loading device available Belt conveyor system available Ergonomic PC workstation available Emergency stop button available Tool holder available PC available A relocation and re-installation service can be arranged and will cost approximately EUR 3,000.

Condition: like new (used), functionality: fully functional, Combination in as-new condition (hose L=3m and applicator gun are new), the glue unit has hardly been used. This unit features a 5 kg tank and two hose connections. The unit is equipped with a gear pump, ensuring a consistent and even output (no dead stroke as with an air pump). Now offered at a special price for this combination. Crodpfxexr Itao Aaaea

Condition: new, Year of construction: 2025, functionality: fully functional, total width: 6,400 mm, total length: 7,800 mm, total height: 2,500 mm, overall weight: 30,000 kg, New machine Machine for punching, embossing, waste stripping and depaneling Specification: Sheet format max. 830 x 1,150 mm Sheet size min. 450 x 550 mm Maximum punching force 3.0 MN (300t) Speed 7,000 Bg/h Processable materials: Paper min. 80 g/m² Cardboard up to 2,000 g/m² Corrugated cardboard up to 4 mm Features: manual non-stop feeder Automatic pile alignment at the feeder 10" inch display at the feeder Automatic non-stop roll cloth in the feeder stripping station Blank separating station Centerline Automatic separating sheet inserter to stabilize the panel stacks Quick-clamping frame stripper upper tool and central stripping board Quick-clamping frame blanking station upper and lower tool Pneumatic clamping frame and punching plate lock APC 1 - automatic punching pressure system APC 2 - platen tilting at the platen exit 1x 4mm cutting plate incl. 10x 1mm cutting plates Credpst H Nhhefx Aaaja 2x 5mm cutting plate 1x Quicklock clamping frame 2x clamping frame without Quicklock QTM fine adjustment of cutting plate Sheet monitoring in each station with 2 sensors Incl. platform 1 tool set (Bobst system) Delivery time: 6-8 months

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 6,334 mm, total width: 4,390 mm, total height: 2,465 mm, overall weight: 30,000 kg, New machine Machine for punching, embossing, waste stripping Technical data: Sheet format max. 830 x 1,150 mm Sheet format min. 450 x 550 mm Maximum punching force 3.0 MN (300t) Speed 7,000 Bg/h Materials that can be processed: Paper min. 80 g/m² Cardboard up to 2,000 g/m² Corrugated cardboard up to 4 mm Features: Automatic non-stop roll cloth in the delivery Stripping station Centerline Quick-clamping frame stripper upper tool and central stripping board Pneumatic clamping frame and punching plate lock APC 1 - automatic punching pressure system APC 2 - platen tilting at the platen exit 1x 4mm punching plate incl. 10x 1mm punching plates 2x 5mm cutting plate 2x clamping frame without Quicklock Incl. platform 1 tool set (Bobst system) Delivery time: 6-8 months Crsdpfx Aast H Nc Soasa

Year of construction: 2020, condition: excellent (used), functionality: fully functional, Graco Tank-Free Hotmelt Delivery System Invisipac HM 25 Year 2020 For delivering and dispensing hot melt adhesive pellets. For professional use only. 1200 psi (8.3 MPa, 83 bar) Maximum Working Pressure 400°F (204°C) Maximum Fluid Operating Temperature 100 psi (0.7 MPa, 7 bar) Maximum Air Inlet Pressure Proven adhesive savings, unsurpassed reliability. Unlike conventional tanks and many "tankless" systems, the InvisiPac system's patented Melt-on-Demand technology ensures a constant flow of adhesive that melts quickly and is dispensed instantly. You save adhesive and costs due to unplanned downtime for maintenance. With the InvisiPac system's robust reporting capabilities, you have the data you need to make smart decisions for your line that can increase efficiency, reduce costs, minimize downtime, and improve productivity. Crsdpfx Aswigbmjaaoa Better performance: No clogged nozzles; No carbon-filled containers; Fast startup in as little as 10 minutes; Improved operator safety; High performance with a sustainable component; Greater cost savings; Consistent adhesive viscosity; No material damage; Little to no waste; Better dispensing control; Use the adhesive of your choice

Condition: excellent (used), functionality: fully functional, SIMPLACUTTER (CAUHE) IV – 1680x1160 Machine little used, in very good condition Equipment: – Pneumatic clutch and brake – Console – Heated plate – 3 working modes: single, continuous, time-delayed opening – Centralized lubrication Crodpfx Aaoyl Unxoaja – Additional safety guards – Working tools – Hard pressure plate

Condition: excellent (used), functionality: fully functional, SIMPLACUTTER (CAUHE) IV – 1680x1160 Machine lightly used, in very good condition, new upgraded electronics + laser protection Equipment: Cjdoyl Um Uopfx Aaajra – pneumatic clutch and brake – control panel – new upgraded electronics + laser protection – 3 operating modes: single, continuous, delayed opening – central lubrication – additional safety guards – operation tools – hardened pressure plate

Condition: excellent (used), functionality: fully functional, SIMPLACUTTER (CAUHE) III – 1480x1070 Machine lightly used, in very good condition Crjdpfxeyl Umne Aaaoa Equipment: – Pneumatic clutch and brake – Control panel – Quick-mount frame (electric) + additional frame – 3 working modes: single, continuous, with time-delay on opening – Central lubrication – Additional safety covers – Service tools – Hardened pressure plate

Condition: excellent (used), functionality: fully functional, SIMPLACUTTER VA (CAUHE) – 1860x1440 Machine with low usage, in very good condition Equipment: – Pneumatic clutch and brake – Control console – 3 operating modes: single, continuous, time-delay on opening – Centralized lubrication Cjdeyl Ulwjpfx Aaaera – Additional safety guards – Working tools – Hardened pressure plate

Year of construction: 1984, condition: good (used), BOBST I 130 ER Automatic Die-Cutting Machine Year of manufacture: 1984 2. Sheet Formats Maximum sheet size: 920 x 1,300 mm Minimum sheet size: 450 x 580 mm Working format: – Max. 890 x 1,270 mm (open chase) – Max. 900 x 1,300 mm (closed chase) 3. Material Specifications Maximum board thickness: 1.5 mm (cardboard) Minimum grammage: 90 g/m² Gripper margin: 10 mm 4. Chase Sizes Credpfxjycv Dve Aaaoa – 915 x 1,300 mm chase without bar – 840 x 1,300 mm chase with bar 5. Pile Heights (Non-Stop Operation) Feeder pile height: Max. 1,500 mm with pallet Delivery pile height: Max. 1,400 mm with pallet Maximum pallet size: 900 x 1,300 mm 6. Equipment and Features – Suitable for carton and paper processing – Not suitable for corrugated board – Stripping possible using stripping frame and separation grid – EMS side lay system for alignment according to printed marks

Condition: excellent (used), Year of construction: 2017, Bacciottini Butterfly E2F Folding Machine – High-Precision Automatic Folding Module Available: Bacciottini Butterfly E2F, an automatic folding module designed for in-line operation with Bacciottini creasers. Ideal for digital production and high-quality jobs with rapid format changeovers. The Butterfly E2F delivers precise folds after the creasing process, ensuring professional finishes for covers, brochures (tri-folds, bi-folds), and specialty applications. Key features: - High-precision automatic folding system - Direct integration with Bacciottini creasers (modular line) - Fast setup via touchscreen control - Automatic format adjustment - High stability and production consistency - Quick job changeover Cjdpfxoymmdze Aaajra Typical applications: - Covers with flaps - Folded brochures (bi-folds / tri-folds) - Covers for wire-o or perfect binding - On-demand digital production Advantages: - Time savings on setup - Higher productivity compared to manual folding - Perfect alignment following the creasing process - Ideal for digital printshops and finishing centers The Butterfly E2F is a compact, robust solution engineered for professional production environments that demand precision, speed, and flexibility.

Year of construction: 2022, condition: like new (used), functionality: fully functional, WOOKIL MEGACUT MC-2500 Die Cutter Credeyl Rp Sopfx Aaasa MAX. SHEET SIZE: 1800x2600 mm MAX. CUTTING SIZE: 1700x2500 mm MAX. CUTTING PRESSURE: 550 tons

Year of construction: 2022, operating hours: 20 h, condition: as good as new (ex-display), Shredder typ PYTHON 1300, with 7 KW electricmotor, 400V 50Hz• • Hopperopening 1300 x 700mm • Main dimensions L 2100 x B 850 x H 1600mm • Outlet opening ca 400x 100mm • Height under output ca 400mm Crodpfsf N Nlrsx Aaasa • Electric cabinet, mainswitch, selector switch aut/man. ON/OFF switch, Emergency Push button • Easy handling/ transport by forktruck or lifting eyes • Weight ca 1100 kg • Machine Manual incl.. • Paint in RAL 3002 and RAL 7022 • (subject to technical changes) • CE certified and “Made in Holland”

Condition: excellent (used), Year of construction: 2014, Straight-line, crash-lock, double-wall, 4-corner and 6-corner boxes. Condition: Perfect! Max. speed: up to 300 m/min; inching speed: 20 m/min Material thickness: up to 1200 g/m² for solid board and corrugated cardboard (E, C, B, AB flute – 3 or 5 layers), max. ~8 mm before folding, ~20 mm after folding Max. thickness of folded box: ~20 mm Modular construction & drives Each section independently driven by servo motor ("SmartServo system") Motorized linear guides for precise carrier transport and positioning Memory Job recall function for fast changeover between repeat jobs Machine sections – main functions: Cjdsw H Nw Espfx Aaaora 1. Feeder Section – Friction feeder with adjustable vibrator, side gates, servo-driven, belts with suction feature, touchscreen panel, rear support for long blanks 2. Side Register Section – Aligns blanks to one side for perfect parallel feed; rapid setup; servo motor 3. Pre-folding Section (optional on AC/PC/SL models) – Pre-folder up to 180° (flap), pre-folder up to 135° (third crease), crease openers 4. Crash Lock Bottom Section – Hook and helix set for folding front flaps, adjustable hook tension, B-lock configuration, fast adjustment 5. Gluing Unit – One lower (left) and option for lower right glue tank; optional upper cold-glue system; easy removal and cleaning 6. Folding & Closing Section – Servo-driven outer belts (up to 180°), three full carriers (upper/lower), mini-box folder, service access 7. Trombone / Transfer Section – Independent drive, automatic belt tensioning, pneumatic squaring devices, box transfer system to press section 8. Press Section – Pneumatic/servo press section, manual/auto modes, length approx. 6.5 m (effective ~4 m), pressure adjustment, front squaring device 9. Back-folding Device (only in SL models) – Electronic, asynchronous system with two independent servo motors, easy setup for 4- & 6-corner boxes 10. Optional Scoring / Creasing Module – Servo-driven creasing section, placed before pre-folding, enables deeper scores Technical specifications 1450 SL: Machine length: from approx. 22.4 m (PC/SL) Width: approx. 2.23 m; Height: approx. 1.5 m Net weight: 15 tons Motor power: 40–45 kW; air supply (6 bar), consumption approx. 30 m³/h, glue tank ~155 L 🤝 Megafold Advantages • Material versatility: from thin solid board to heavy corrugated and multi-wall • Wide range of box styles: straight-line, crash-lock, double-wall, 4-corner, 6-corner • Modular and configurable design allows adaptation to specific production needs • Advanced automation and precision: servo drives, memory settings, operator radio-controller, touch HMI • Easy maintenance and cleaning due to modular components and operational access

Condition: used, Year of construction: 1989, Jagenberg Diana 65-1 folder gluer, production year 1989. - Straight line gluing - 3-point gluing, crash lock, lock bottom Cedpfx Aajw H Rc Njaera - KQ glue system with 4 guns - Machine cleaned, in production – can be inspected upon request, in very good condition