Used mounting technology for sale (145)

Year of construction: 2018, condition: good (used), functionality: fully functional, NeoDen4 pick-and-place machine, available as it is no longer required. Technical specifications/equipment: Manufacturer: NeoDen Model: NeoDen4 Integrated PC including software (runs directly on the machine) Firmware: V4.1.3 B2 Proprietary NeoDen feeders – only for sale as a complete unit Feeder configuration: 24 × 8 mm 7 × 10 mm 5 × 16 mm 2 × 24 mm -> Total of 38 feeders Condition/functionality: Machine starts without issues Axes reference correctly Pick-and-place heads move up/down correctly Camera and LED lighting function properly Fodpfx Aajymavqo Ejfw Feeders are correctly detected (see photos) No pick-and-place operations performed Visually in good, well-maintained condition. The machine was used in a production environment and is currently out of operation. Scope of delivery: NeoDen4 machine Integrated PC incl. software Feeders as specified above (scope of delivery as shown; however, without mounted components) Terms and conditions: - Pickup only - No individual sale/separate items - Private sale, no warranty, no guarantee, no returns

Year of construction: 2005, condition: good (used), Basic configuration Oven type: Reflow soldering oven with full convection heating Heating zones: 3 zones (convection) Cooling zone: 1 zone (active air cooling) PCB handling: Mesh belt or optional pin (chain) conveyor PCB transport direction: Left → right Dimensions (L × W × H): approx. 2000 × 710 × 1200 mm Weight: approx. 237 kg Controller: Microprocessor (LCD, languages incl. English/German/French) Program capacity: 49 profiles (fixed + freely programmable) Temperature setting: °C / °F Temperature range: approx. 20°C – 300°C per zone Max. reflow width: 10 – 300 mm Conveyor speed: 100 – 800 mm/min (with optional slow-speed module) Transport repeatability: ± 2 mm/min Full convection air circulation: Total heating air: 1200 m³/h Per zone: 400 m³/h Cooling zone: 300 m³/h Atmosphere: air (standard), optional N₂ model available Power requirement (EU): 3×400 VAC, 50 Hz, ~25 A Power requirement (US): 3×208 VAC, 60 Hz Ffedpfx Ajyl Uvvsa Esw Continuous power: ± 6.1 kW Start-up/warm-up power: ± 10 kW during initial warm-up Min. exhaust: approx. 2×250 m³/h recommended 📊 Other details Exhaust: 2 ports (80 mm), temperature < 55°C Sound level: max. 70 dB(A) Safety certifications: CE, EN954-1 Class 3 Features: emergency stop, overheat protection ✔ Reflow soldering of SMT printed circuit boards (Pb-free and standard) ✔ Continuous production and small to medium batch sizes ✔ Prototyping and R&D applications ✔ Optional air or nitrogen operation (depending on model)

Year of construction: 2025, condition: good (used), General Features Type: Desktop reflow oven (infrared + hot air convection) Number of heating zones: 6 (top heating) Cooling zone: 1 internal cooling zone Control: Touchscreen with programmable profiles Application: Prototyping, small to medium series production PCB Specifications Max. PCB width: ± 260 mm Max. PCB length: ± 350 mm Max. PCB thickness: 20 mm Transport: Mesh conveyor (adjustable speed) Temperature & Performance Max. temperature: ± 300 °C Warm-up time: ± 15–20 minutes Temperature control: PID regulation Temperature accuracy: ± 1 °C Number of programmable profiles: multiple (storage possible) Electrical Data Power supply: 220V (single phase) Power: ± 1100–2000 W (depending on version) Ffodpfx Aoyl Uu Sea Esw 📏 Dimensions & Weight Dimensions (L×W×H): ± 1020 × 507 × 350 mm Weight: ± 39 kg Suitable For Lead-free (RoHS) soldering Prototyping labs Small production environments Universities / development departments

Year of construction: 2011, condition: good (used), Type: Reflow soldering oven for PCB assembly (convection reflow). Manufacturer: SEHO Systems GmbH. Model: GoReflow 1.8. Application: Soldering process using full convection heat for small to medium-sized batches. Heating and Process Zones Number of heating zones: 5 zones (via convection). Length of heated zone: approx. 1850 mm. Maximum PCB width: approx. 410 mm. Number of cooling zones: 2 zones with active ventilation. Average transport/conveyor speed: approx. 0.40 – 0.55 m/min. Machine Structure and Dimensions Total length: approx. 3200 mm. Width: approx. 1250 mm. Ffjdpfx Aeyl Utbsa Esw Height: approx. 1600 mm. Control and Functions Operation: Touch display or microprocessor-controlled interface (depending on configuration). Flux management: Filter and collection system for solder flux residues. Safety features: Emergency stop button and visual status indicators (signal lamp). Inline integration: Options for connection to SMT production lines via interfaces (optional).

Condition: as good as new (ex-display), Year of construction: 2021, operating hours: 50 h, A gantry system for automated loading or transport of heavy parts is for sale. This gantry system can be used for various loading applications (milling machines, lathes, paint lines, welding units, etc.). X travel – 11.6 meters, Y travel – 2.38 meters, Z travel – 2.5 meters. All axes are driven by SEW servo motors. Servo-driven single gripper for parts up to 500 kg. Ffsdpfowdnb Dsx Aa Ejw Control cabinet – PLC control – Siemens S7-1500 and SEW drives. The gantry system can be inspected by appointment in Overath.

Year of construction: 2026, condition: new, working length 1000-1600 mm Working width 40-150 mm Fodpfxsyk H Tds Aa Eofw Thickness 10-80 mm

Condition: used, Year of construction: 2015, functionality: fully functional, FRITSCH placeALL 510 SMT Pick-and-Place Machine – Year 2015 – incl. approx. 40 Feeders For sale is an SMT pick-and-place machine FRITSCH placeALL 510, year of manufacture 2015, in good and fully operational condition. The machine was used for prototype manufacturing and small batch production, and is ready for immediate operation. The placeALL 510 is a modular pick-and-place system suitable for a wide range of SMD components. The integrated vision system enables precise placement of fine-pitch components. Technical Data • Model: FRITSCH placeALL 510 Ffsdpfxoyrx Rqo Aa Eew • Year of manufacture: 2015 • Placement capacity: up to approx. 10,000 components/hour • Component sizes: from 0201 up to larger ICs / fine pitch • Vision system for component recognition • Modular feeder support (tape / stick / tray) Equipment • Approx. 40 feeders included • Vision system • Control PC and software • Suitable for prototypes and small batch production • Machine ready for operation This machine is well-maintained and fully functional. Inspection and test run possible by arrangement. Year of manufacture: 2015 Feeders: approx. 40 units Location: 09473 Crottendorf Price: Negotiable €13,900, shipping available by arrangement

Year of construction: 2017, condition: used, functionality: fully functional, machine/vehicle number: AU170124-01, APPLICATION AREA UP TO NOW: Positioning/handling of panels from L/W/H 1500mm x 1500mm x 12mm Ffodpfx Aaoytphij Eew up to L/W/H 8000mm x 2500mm x 80mm EQUIPMENT: Traveling gantry with synchronized drive Vacuum lifter beam with automatically switchable suction rows, adjustable based on the respective workpiece length Schmalz vacuum generator with area suction grippers Clamp cartridges next to the suction cups ensure vacuum activation Z-lift of the suction spider via scissor guides Z-axis asynchronous motor, MoviDrive frequency converter, belt drive Interfaces for upstream and downstream stations Control system: Siemens S7-300 CONTROL CABINET: Power supply, power, and control section with main switch, power supply unit, motor protection switches, automatic circuit breakers, power contactors, auxiliary contactors, Simatic S7-300 control system consisting of a CPU315F-2PN/DP, PN/PN coupler, 1 pc. Micro Memory Card, Ethernet interface, all necessary digital input and output modules, and terminals, fully wired. Fieldbus system: Profinet-Safe.

Year of construction: 2008, condition: excellent (used), functionality: fully functional, For sale is a 6-axis placement robot from Erowa, this was used to load 2 die-sinking EDM machines from Ingersoll, both with tools and workpieces. The Ingersoll machines are also for sale and can be offered as a package Technical data: X-axis: 1200 mm Z-axis: 1050 mm C-axis: 350 ° A-axis: +/-180 ° B-axis: +/- 90 ° Y-axis: 1.1-18.74 m Ffsdjtdrkqspfx Aa Eew Disassembly, loading and shipping can be organized throughout Europe for an additional charge. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Year of construction: 2014, condition: excellent (used), functionality: fully functional, For sale is an SMD pick-and-place machine from Fritsch GmbH, model placeALL 610, equipped with a single placement head featuring laser centering. The machine is fully operational and ready for use after programming. Technical Data: Type: placeALL 610 Year of manufacture: 2014 Placement rate: 600 components/hour Component sizes: 0402 chips up to 22x22 mm (alternatively up to 32x32 mm) Laser centering: non-contact, on-the-fly Slots: 108 Feed positions: 208 for 8 mm tapes Placement table: 520 x 370 mm Placement area: 620 x 450 mm Tool: 5 x standard Additionally: Camera system: Vision System II + lighting Dispensing system: CD-05 placement tool & air blow function Frame adjustment; access for robot arm from the left Universal CAD conversion Barcode reader for ID barcode Camera attachment for LM, SM, FP systems and much more. Feeders: Fsdpfx Aajwy U Nmj Eofw - 2 pcs feeder racks with 16 slots each, for tape/tube feeders, front and rear side PA610 - 1 pc feeder rack with 22 slots, for tape/tube feeders, left and right side PA610/L - 20 pcs tape feeders 8 mm, max. tape thickness 1.1 mm, max. tape height 6.0 mm, max. tape width 8.3 mm, max. roll width 17.5 mm, 1 slot each, barcode configurable - 4 pcs tape feeders 12 mm, max. tape thickness 1.4 mm, max. tape height 6.0 mm, max. tape width 12.3 mm, max. roll width 17.5 mm, 1 slot each, barcode configurable - 2 pcs tape feeders 16 mm, max. tape thickness 1.4 mm, max. tape height 13.0 mm, max. tape width 16.3 mm, max. roll width 30.5 mm, 2 slots each, barcode configurable, incl. feeder extension 908.120.007 - 1 pc tape feeder 24 mm, max. tape thickness 1.4 mm, max. tape height 13.0 mm, max. tape width 24.3 mm, max. roll width 30.5 mm, 2 slots, barcode configurable, incl. feeder extension 908.120.007 - 1 pc vibration tube feeder, processes max. 10*SO sticks, 5 slots, barcode configurable - 1 pc feeder setup station with software for setting up and creating a complete component, PC connection via RS232 (PC not included) - 1 special PA wire feeder for feeding and cutting wire pins, including placement tool - 5 pcs tape feeder TF 943 cassettes for 8 mm rolls, width 11 mm Transport and loading can be organized Europe-wide upon request for an additional fee. Prices are exclusive of VAT. Viewing available by appointment. Contact us—our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase/sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY, ETC. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or to get in touch, please visit our website.

Condition: used, functionality: unexamined, Year of construction: 2015, MAGAZINE LOADER, magazine loading system, magazine loader, shuttle magazine unloader, magazine feeder, magazine unloader, connecting conveyor, magazine loading system for large circuit boards, destacker: YJ LINK ALD-CE SINGLE MAGAZINE LOADER Working height: 950 +/-20 mm Working width: 250 - 510 mm Size: 1400 x 1420 x 1830 mm (WxDxH) (2x) YJ LINK magazine loading system for large circuit boards Size: 1500 x 2850 x 1830 mm (WxDxH) YJ LINK ALD-CE magazine loader This device is located at the beginning of the SMT line. It transfers printed circuit boards (PCBs) stacked in a magazine rack to the downstream machine one at a time using a pneumatic pusher. Touch screen (control panel) Controlled by PLC (Programmable Logic Controller) SMEMA interface YJ LINK AUD-CE Shuttle Magazine Unloader Shuttle Magazine Unloader Located at the end of the SMT line, this device consists of a combination of a single shuttle and a double lifter. It stacks printed circuit boards (PCBs) one at a time into an empty magazine rack using a pneumatic pusher mounted on the single shuttle. LED tower lamp (with buzzer) Touch screen (control panel) Controlled by PLC SMEMA interface Integrated single shuttle conveyor YJ LINK ADL-CE Magazine Feeder The YJ LINK ADL-CE is an automatic magazine feeder used in SMT production lines to efficiently load printed circuit boards (PCBs) into magazines. YJ LINK AMB-CE Magazine Unloader YJ LINK AMB-CE is an automatic magazine unloader used in surface mount technology (SMT) to efficiently unload printed circuit boards (PCBs) from machines and stack them into magazine racks YJ LINK ACC-CE Connecting Conveyor Size: 1500 x 610 x 950mm (WxDxH) YJ LINK AMB-CE Magazine Unloader YJ LINK AMB-CE is an automatic magazine unloader used in surface mount technology (SMT) to efficiently unload printed circuit boards (PCBs) from machines and stack them into magazine racks YJ LINK ADL-R90 Destacker Destacker ￭ LED tower signal light (with buzzer) Ffsdsv Hpblspfx Aa Esw ￭ Touch screen (operator panel) ￭ Controlled by PLC ￭ SMEMA interface ￭ 40 pcs stacking capacity at 1kg ￭ Safety light barrier on the screw ￭ Automatic width adjustment ￭ Double plate structure Transport height: 950mm ± 20mm Color: EX8816(S)-SR-WH020 (KCC) Conveying direction: Left to right / Right to left Fixed rail: Front / Back PCB edge: 3mm PCB thickness: 1.0mm ~ 2.0mm Conveying speed: 200mm/s Conveyor belt: Antistatic 10¹⁰ ~ 10¹², temperature: 70˚C Air supply: 0.5Mpa (5 bar) Air consumption: 4 ℓ/min Power consumption: 430W Power supply: 230V / 50~60Hz, 1 phase

Year of construction: 1989, condition: ready for operation (used), A stencil screen printing machine Ekra is available. Frame dimensions X/Y: 800mm/570mm, print dimensions X/Y: 500mm/390mm, print speed: 110mm/s, positioning accuracy: +/-0.02mm, squeegee pressure: 320N, table adjustment X/Y: +/-8mm, max. print material thickness: 40mm, machine dimensions X/Y/Z: approx. 1300mm/1050mm/1350mm, weight: approx. 350kg. Documentation available. An on-site inspection is possible. Ffsdpfeymfdmex Aa Eew

Year of construction: 2008, condition: ready for operation (used), Positioning resolution: 1µm, max. placement rate: 6000cp/h, max. feeder capacity: 310, min. PCB dimensions X/Y: 50mm/50mm, max. PCB dimensions X/Y: 780mm/600mm, PCB thickness range: 0.5mm-3.5mm. Documentation available. An on-site inspection is possible. Fjdpfx Aoymfcpsa Eefw

Year of construction: 2006, condition: good (used), For sale are 3 Siemens pick-and-place machines, consisting of: - 1 unit X 2 (year 2006) B 348 = €16,000 + VAT - 1 unit X 2 (year 2006) B 251 = €16,000 + VAT - 1 unit X 3 (year 2005) B 111 = €16,000 + VAT All three machines have been inspected and fully tested for functionality in our specialist workshop. Ffsdpsyrm E Aofx Aa Ejw Each machine has a valid MFU (machine function certificate). An on-site inspection is possible and welcome. Please refer to the photos for the technical specifications and configuration of the individual machines; we are also happy to answer any questions you may have about the machines in person. Upon request, a reference run video is available for every machine. We are also happy to carry out modifications for your specific application at an additional cost. The systems are sold without placement tables and without MTC. Location of the machines: Zollner Elektronik AG / Warehouse Roding / Buchenstraße 18 - 20 / 93426 Roding.

Condition: used, functionality: fully functional, Coil winding machine Froitzheim und Rudert Winding diameter 250 mm, winding width 500 mm Pneumatic tailstock Ffodjylydlspfx Aa Eew

Year of construction: 2012, condition: ready for operation (used), A placement machine is offered. Manufacturer: MYDATA Mycronic, PCB size X/Y: 70mm/50mm - 554mm/443mm, PCB thickness: 0.4mm - 6.0mm, PCB weight max.: 8kg, SMEMA transfer height typ.: 892mm - 987mm, installation dimensions W/L/H: approx. 2740mm/1740mm/1500mm, machine weight: approx. 1700kg. Inspection by arrangement possible. Fsdeylzh Sspfx Aa Ejfw

Year of construction: 2011, condition: ready for operation (used), An inline SMT stencil printer/solder paste printer is offered. Print area X/Y: 50mm/40.5mm - 510mm/508.5mm, PCB thickness: 0.2mm - 6mm, board weight max.: approx. 1kg, print pressure range: 0 - 20kg, core cycle time: approx. 12s, machine alignment capability: greater 2Cpk at +/-12.5µm 6 Sigma, process/wet print accuracy: greater 2Cpk at +/-25µm 6 Sigma, installation space L/W/H: approx. 2060mm/1500mm/1570mm, machine weight: approx. 800kg. Inspection by arrangement possible. Fsdeylzhljpfx Aa Esfw

Year of construction: 2021, condition: excellent (used), functionality: fully functional, Complete AOI Production Line GÖPEL Vario Line 3D X100 incl. Handling – Used System For sale is a complete, integrated AOI production line consisting of a GÖPEL Vario Line 3D X100 inline AOI system including full PCB handling (loading and unloading, buffer and verification stations). Line configuration (excerpt): - GÖPEL Vario Line 3D X100 Inline AOI - 3D measurement module (ViewZ) - Orthogonal and angled view inspection - PILOT AOI software incl. CAD import, OCR/OCV, statistics - Inspection area: 510 x 470mm PCB Handling (RG Modules): - LPE-1M Loader (magazine loader) - PB 500/1 buffer conveyor - PB 500/3-AP buffer conveyor with integrated inspection/verification station - LPA-2M/QV unloader with pass/fail sorting (2 magazines) - Electric width adjustment (bus connection) - Inline interfaces (SMEMA) - Verification and analysis workstations Condition: - Used equipment from ongoing production - Well maintained and fully functional - Sale as a complete line, not individual components Fsdpsyhzunjfx Aa Ejfw Viewing & Service: - Sale on behalf of a customer - On-site inspection possible - Training and commissioning can be offered on request - Support with disassembly, transport, and recommissioning available by arrangement - Ideal for EMS providers and electronics manufacturers Location: Germany Scope of delivery: as inspected

Condition: excellent (used), functionality: fully functional, Good day, We are offering used clamping devices from Erowa and 3R, suitable for die-sinking EDM and milling operations. Below is a list of the available items (please refer to the attached images for details): - ER-034387 QuickChuck 50 mounted on a clamping block (Image 03/04) - ER-012299 Quick-Change Chuck NSF on a plate (Image 05/06) - ER-010562 Probe with 2 mm ball (Image 07/08) - ER-010723 ITS 50 Control Arbor (Image 09) - F-Tool Holder with 25 mm square (Image 10/11) - MTS Pallet (Image 12/13) - ER-008566 Collet Holder 50 (Image 14/15) - ER-010495 15 mm Square Alignment Gauge (Image 16/17) - Vice with Erowa platform (Image 18/19) - Erowa Holder with hexagonal slot, e.g. for dial gauge holders (Image 20/21) - Erowa Holder for flexible clamping applications (Image 22/23) - System 3R high-precision vise / can be converted to Erowa on request (Image 24/25) All parts have been thoroughly inspected and are fully functional. Ffodpfx Aoyl Nr Ssa Eew Please feel free to contact us if you have any questions or are interested.

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: DSPL-2025-Q2-01, overall weight: 150 kg, input voltage: 400 V, input current: 10 A, type of input current: AC, warranty duration: 12 months, total length: 1,560 mm, total width: 780 mm, total height: 950 mm, input frequency: 50 Hz, protection type (IP code): IP20, year of last overhaul: 2025, Integrated Pick-and-Place System for Industrial Assembly Applications The DS Place was developed to reduce the high integration effort typically associated with conventional pick-and-place solutions. In many projects, the robot, feeding system, vision system and control unit are sourced separately and then integrated via multiple interfaces. This often results in increased coordination effort and extended commissioning times. The DS Place is designed as a fully coordinated, integrated system. System components: SCARA robot Camera-based part detection (vision system) Automatic feeding via material hopper and pick belt Integrated PLC control system Functionality: Parts are automatically fed from the material hopper onto the pick belt, detected by the camera system, and then precisely transferred by the robot onto a discharge conveyor or into a downstream process. Technical features: Throughput: up to approx. 1,200 parts per hour Suitable for metal, rubber, wood and plastic parts Maximum part length: approx. 30–35 mm Gentle handling Interfaces: TCP/IP, optional PN/PN coupler, 24 V I/O Commissioning: position the system, teach the drop-off location, start operation Fjdpow Rm Hwsfx Aa Ejfw Typical applications: Automatic assembly Sorting and transferring of small parts Integration into existing production lines Manufacturer: DS auto-solutions Year of manufacture: 2025 Condition: New

Condition: used, smd pick and place, smd conveyor,pcb conveyor SMT Linear Feeder / Transfer Unit / PCB Conveyor – Shuttle Conveyor JOT Automation J208-50.0 – Used Machine Manufacturer: JOT Automation Model: J208-50.0 The conveyor can also be used for other applications requiring similar linear transfer movement. We have several identical or similar machines available – please feel free to request our quotation. Technical Specifications: Dimensions: 3700 × 500 × 1000 mm (L × W × H) Maximum Speed: up to 1 m/s Load Capacity: up to 50 kg Construction: Aluminium profiles and stainless steel components, ensuring a durable yet lightweight structure Control System: PLC-based control system, easily programmable and suitable for automated transfer processes The JOT Automation Shuttle Conveyor J208-50.0 is a highly efficient and reliable transfer system, ideal for connecting different sections of a production line and ensuring smooth product movement between processes. Ffsdpeyrtihofx Aa Eow Type / Serial No.: J208-50.0 / E11042006

Condition: not inspected (used), Bar feeder by manufacturer FMB, model turbo 5-42 XT Fjdoyl Ng Nopfx Aa Esfw Condition: used. Available immediately. The bar feeder was mounted on a MAZAK SQT10MS.

Condition: good (used), Year of construction: 2015, functionality: fully functional, Model: Divisio 5100 Flexible Depaneling System with Servo Gripper Included: Tray transport line + 2× PARIO 500 Tray Stackers (Loader & Unloader) PCB sizes: approx. 70×50 mm to 450×250 mm | Thickness 0.8–2.4 mm Max. panel size: up to 460×460 mm Automatic transport width adjustment Milling separation with X/Y/Z axes, 12-position tool changer, router bit breakage monitoring Camera system including fiducial recognition, code reading & milling quality inspection Automatic product changeover via code + variant verification Fodpfxeygk Nbo Aa Eofw Good/bad part sorting with reject chute/reject bin Tray handling up to 600×400 mm, stack height up to 400 mm, electric stacking axes Industrial vacuum cleaner (Ringler RI 334D4-ENT-H) with suction power monitoring ESD version (energy chains & pneumatics) Inline-capable (Interlock/SMEMA), suitable for series production Condition: Used

Year of construction: 2018, condition: good (used), EKRA Material Storage System S10 Select Year of manufacture: 2018 Consumables such as solder paste and adhesives can be stored in accordance with product specifications and in a production-optional manner Traceability Temperature control (4-12°C) Fodpfx Aasxxk Els Eefw 8 tiers Material dispensing via lift system Handheld scanner

Year of construction: 2017, operating hours: 157 h, condition: used, functionality: fully functional, machine/vehicle number: 0000014/21, Essemtec pick-and-place machine paraquda.g2 with dual head Accessories: 8x 8mm double high-speed feeder; 10x 12mm high-speed feeder; 6x 16mm high-speed feeder 3x 16/24mm high-speed feeder; 2x 32/44mm high-speed feeder; 3x 8mm 10-lane feeder 1x 8/12mm 8-lane feeder Fedew U Dpqspfx Aa Eefw