Used Industrial robots for sale (1,090)

Year of construction: 2002, Condition: refurbished (used), ROBOT ABB IRB2400 M98A WITHOUT CABLES AND PANELS Fjbuehd I Dmo Sbv Tjgb

Condition: excellent (used), Year of construction: 2016, This 5-axis palletizing robot is ready to effortlessly stack payloads of 120 kg to amazing heights. It has a streamlined design and can reach up to 3195 mm. Fgebu Sbvswfxpus Tob

Condition: good (used), Year of construction: 2020, operating hours: 1,960 h, 6-axis articulated Robot & Controller - 9 units available Max Reach: 650mm Max Payload: 5kg Voltage: 1Phase 200-240VAC Frequency: 50/60Hz Max Current: 10Amp Short Circuit Rating: 1.5kA Note - Price mentioned is Ex works. Any expenditures incurred for packaging, handling and logistics would be charged extra to the buyer. Fgsbu Sjvzv N Ejbv Tob Acknowledgement and disclaimer The goods the subject of this transaction were acquired by the seller for its own purposes and are no longer required. The sale of the goods is not part of the seller’s ordinary business and is part of a one-off sale to dispose excess spare parts that are no longer required and equipment that is surplus to our current requirements. The seller does not make any representation as to the purpose for which the goods might be utilised or their fitness for any particular purpose. The seller is not aware of any defect or faults in the goods (other than as may have been disclosed to the buyer). The buyer accepts the goods on the basis of their knowledge of any defects disclosed and the goods are otherwise provided ‘as is’ and without any warranty or representation as to their condition, except as expressly stated otherwise. No refunds will be offered if the goods are not suitable for your particular intended purpose, unless an express representation was made to say that the goods would be suitable for that specific purpose. Nothing in these terms is intended to exclude or limit any remedy that may be available to a consumer under the Australian Consumer Law to the extent that it applies to a particular sale of any goods.

Condition: excellent (used), Year of construction: 2018, The Staubli TX90L is a six-axis robotic arm characterized by a 15 kg payload capacity and a 1200 mm reach. This configuration enables the robot to perform a range of manipulation tasks within its defined operational envelope. Fgebuewd Ixps Sbv Teb

Condition: good (used), Year of construction: 2019, operating hours: 1,960 h, machine/vehicle number: 594-02462, 4-axis Scara Robot & Controller Max Reach: 600mm Max Payload: 5.5kg Voltage: 1Phase 200-240VAC Frequency: 50/60Hz Max Current: 10Amp Short Circuit Rating: 1.5kA Note - Price mentioned is Ex works. Any expenditures incurred for packaging, handling and logistics would be charged extra to the buyer. Fgobsvzv Hqju Sbv Teb Acknowledgement and disclaimer The goods the subject of this transaction were acquired by the seller for its own purposes and are no longer required. The sale of the goods is not part of the seller’s ordinary business and is part of a one-off sale to dispose excess spare parts that are no longer required and equipment that is surplus to our current requirements. The seller does not make any representation as to the purpose for which the goods might be utilised or their fitness for any particular purpose. The seller is not aware of any defect or faults in the goods (other than as may have been disclosed to the buyer). The buyer accepts the goods on the basis of their knowledge of any defects disclosed and the goods are otherwise provided ‘as is’ and without any warranty or representation as to their condition, except as expressly stated otherwise. No refunds will be offered if the goods are not suitable for your particular intended purpose, unless an express representation was made to say that the goods would be suitable for that specific purpose. Nothing in these terms is intended to exclude or limit any remedy that may be available to a consumer under the Australian Consumer Law to the extent that it applies to a particular sale of any goods.

Condition: excellent (used), Year of construction: 2018, The Kawasaki RS010N is a high-performance industrial robot designed for precision tasks such as assembly, material handling, and machine tending. Its compact design and advanced motion control capabilities enable efficient operation in confined workspaces. The RS010N boasts a high payload capacity and repeatability, contributing to increased productivity and consistent output in automated manufacturing processes. Fgsbu Sbewd Ifpov Tjb

Condition: excellent (used), Year of construction: 2018, The KUKA KR 30-3 is a six-axis robotic arm manufactured by KUKA. Key specifications include a payload capacity of 30 kg and a maximum reach of 2033 mm. Furthermore, the unit exhibits a repeatability of 0.05 mm and has a total weight of 665 kg. Fgjbu Sjwd Hm Esbv Tob

Condition: used, Year of construction: 2019, Axis specifications Arm length 300 mm 300 mm 200 mm 300 mm – Rotation angle +/-130 ° +/-145 ° – +/-360 ° AC servo motor output 400 W 200 W 200 W 200 W Deceleration mechanism Speed reducer Harmonic drive Harmonic drive Ball screw Harmonic drive Transmission method Motor to speed reducer Direct-coupled Speed reducer to output Direct-coupled Repeatability Note 1 +/-0.01 mm +/-0.01 mm +/-0.004 ° Maximum speed 8.4 m/sec 2.3 m/sec 1.7 m/sec 1700 °/sec Fgobu Sbvjwdtl Io Tob Maximum payload 10 kg Standard cycle time: with 2kg payload Note 2 0.46 sec R-axis tolerable moment of inertia Note 3 0.30 kgm2 User wiring 0.2 sq × 20 wires User tubing (Outer diameter) ϕ 6 × 3 Travel limit 1.Soft limit 2.Mechanical stopper (X,Y,Z axis) Robot cable length Standard: 3.5 m Option: 5 m, 10 m Weight 31 kg Note 1. This is the value at a constant ambient temperature. (X,Y axes) Note 2. When reciprocating 300mm in horizontal and 25mm in vertical directions. Note 3. There are limits to acceleration coefficient settings. See P.539.

Condition: new, Year of construction: 2017, The KR 3 R540 is designed for a rated payload of 2 kg in order to optimize the dynamic performance of the robot. With reduced load center distances and favorable supplementary loads, a maximum payload of up to 3 kg can be mounted. Fgsbu Sbvjwdq Ume Tsb Technical data Maximum reach 541 mm Maximum payload 3 kg Pose repeatability (ISO 9283) ± 0.02 mm Number of axes 6 Mounting position Floor; Ceiling; Wall Footprint 179 mm x 179 mm Weight approx. 26.5 kg

Condition: refurbished (used), Year of construction: 2018, Specifications Brand Fanuc Model M-20iA Fsbu Sbowdq Ugov Togb Type Robot Arm Axes 6 Payload 20 kg Reach 1811 mm Repeatability 0.08 mm Weight 250 kg The Fanuc M-20iA robot is a 6-axis robot arm, it has a payload of 20 kg and a reach of 1811 mm.

Condition: as good as new (ex-display), Year of construction: 2020, KR 10 R1100-2 Article No.: 290003 Fobu Sswdq Uasbv Tegb Boost your productivity with the reliable small robot from KUKA for every application. 10 kg 1101 mm Floor, Ceiling, Wall, Desired angle

Condition: refurbished (used), Year of construction: 2020, The Epson LS6-602S, a 4-axis SCARA robot with a 6 kg payload capacity and 600 mm reach, has been assessed and found to be in optimal condition. Prior to shipment, the robot will undergo comprehensive testing and meticulous packaging procedures to ensure its integrity during transit. Fsbswdl S Hsu Sbv Togb

Condition: used, Year of construction: 2018, The UR3 collaborative robot, a 6-axis arm with a 3 kg payload and 500 mm reach, is offered for sale. Having been utilized primarily for demonstrative purposes with short working hours, the robots are in excellent condition. Prior to shipment, each robot will undergo comprehensive testing and be securely packaged. Febu Sbvswdl Sgo Tjgb

Condition: used, Year of construction: 2017, The UR5 robot is a 6-axis robot arm, it has a payload of 5 kg and a reach of 850 mm Fobewdl Rpju Sbv Togb 4 units of UR5 collaborative robots are currently available for purchase. Prior to shipment, each unit will undergo thorough testing, cleaning, and professional packaging to ensure optimal condition upon arrival.

Condition: used, Year of construction: 2019, Universal Robots UR10 cobot is an industrial robotic arm designed to perform the toughest tasks with the highest precision. The robot has a carrying capacity of 10KG. Fgsbuswdl Izj Sbv Tsb Currently, six UR10 collaborative robots, manufactured between 2019 and 2020, are available in our inventory. These units, previously utilized for CNC pickup operations, are in excellent condition. Recorded operational hours range from 500 to 1100 days; however, actual usage is estimated at approximately half of the recorded time due to the previous user's operational practices.