Agfa chiller

Agfa

Condition: ready for operation (used), Year of construction: 2015, A digital Agfa UV large-format hybrid printing system is offered. Print resolution: 720dpi/1440dpi, max. print speed: 53m²/h, ink configuration: CMYK + lc + lm + white, max. media width: 2050mm, max. print width: 2000mm, max. media thickness: 45mm, max. board weight: 10kg/m². Machine dimensions X/Y/Z: approx. 4350mm/1470mm/1600mm, weight: approx. 1800kg. Including 4 nearly new tables for board printing and a workstation. The ink configuration is currently converted for traffic sign ink. Conversion back to standard CMYK is possible. An on-site inspection is possible. Ncjdpfx Ajznc Rlocmow

Condition: new, *TECHNICAL SPECIFICATION: Heating capacity: up to 36 kW per consumer circuit Cooling capacity: up to 30 kW per consumer circuit at -30°C Load circuits: 1 or 2 as standard Temperature range: - 45°C to +130°C Medium: water / glycol mixture Dimensions LxWxH (without connections) : 1-circuit: 1950 x 1280 x 1725 mm 2-circuit: 2150 x 1640 x 1725 mm Weight: 1-circuit: approx. 1300kg 2-circuit: approx. 1500kg *HIGHLIGHTS EQUIPMENT: -Controls: Temperature control (standard) -Control via SPS with touch screen -Analogue and digital interfaces -Internal 2-circuit pump system (INFO: Ensures performance values even at low flow rates) -Heating control via solid-state relay (SSR) -Flow measurement in the internal circuit for flow monitoring (INFO: If the water/glycol mixture is incorrect, the system automatically warns and switches off in the next step) -Pressure-controlled cooling water regulator (INFO: Much more accurate than temperature controls) Stainless steel tank, corrosion-resistant components (stainless steel/non-ferrous metal) (non-ferrous metal-free optional) All medium-carrying components and piping insulated for low-temperature application -Water-cooled condenser (air-cooled on request). *OPTIONS: Ncedpfx Acog Ezaromsw -flow rate control: up to 100l/min, >4 l/min +/- 5% of measured value -Pressure control: 0.5 to 4.5 bar (control range) -compressed air monitoring -test piece emptying by means of compressed air - Cooling water monitoring -Limitation of inlet pressure -Other special options available on request and after technical inspection Visit our website for more details or for other performance classes. *This unit conforms to the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: good (used), Xcalibur 45s Elite with new laser, old laser is also still available. Ncedpfxoxcurqj Acmjw

Year of construction: 2017, condition: used, Second-hand machine Year of manufacture: 2017 Features and technical specifications: Automatic cutting plotter with extraction sectors on the work surface Automatic cutting table with automatic detection of print images and reference points The work surface consists of 40 individual vacuum sectors, which are automatically activated as required Multi-tool cutting head for cutting, scoring and milling materials up to 50 mm thick Multi-batch cutting possible to cut different substrates simultaneously Automatic tool presetting Video projection system for optimising material yield Cutting speed up to 102 m/min, acceleration 1.4 G Automatic height detection of substrates Working area 3100 x 2000 mm Suction sectors within the working area: 40 Cutting speed up to 102 m/min Tooling programme: Nedpfxezlbqle Acmscw Scoring tool, oscillating blade, router Elitron CAD & CUT (software) Elipack Availability: at short notice Storage location: 63934 Röllbach

Year of construction: 2015, condition: new, Vertical furnace height: 1100mm useable diameter: 790mm outside diameter: 1560 mm outer height (without lid): 1480mm Ncsdpfx Ascdi D Docmjw outer height (with lid): 2300mm electrically heated: 40 kW circulating fan: 2,2 kW three-phase supply: 400 V, 50 Hz temperature: max. 750°C

Condition: good (used), Year of construction: 2018, UV industrial super wide format digital printer for rigid media he Inca Onset X2 is a high-volume industrial UV flatbed inkjet printer designed for display graphics, POP/POS production, packaging, and specialty printing. Developed by Inca Digital Printers (later part of Agfa), the X2 is positioned as a production-class printer that combines high throughput with excellent image quality. The system is intended for medium-to-high production environments where productivity, automation, and reliability are critical. Printer is originally X3, but was converted to X2 (two channels of CMYK ) Manufacturing Year: 2018 Colour configuration: 2xCMYK RIP: not included Automation: 3/4 automated Productivity: up to 124 beds/hour Status: fully operational, 45 printheads out of 224 are required to have high quality on high speed (can be quoted). In production, fully operational demo possible Nodezhv T Tjpfx Acmjcw Decommissioning, transport and installation available upon request. For further technical details, refer to enclosed data sheet.

Condition: excellent (used), Year of construction: 2010, machine/vehicle number: 3.324287, • Large format printer with solvent ink • Solvent based ink: 6 colors (4CMYK+2CM light) • Printing width: 3.2 M (3200 mm) • 24 high-performance Spectra piezoelectric printheads • 600 dpi (2-sided printing) • Max. roll weight up to 230 KG • Up to 64 m2 / h • Jeti software RIP (E9YC4000) Equipment / additional information: • Carrier rewind unit: Jeti 3M Solvent (E9WF2000) • Retro Heater Unit (E9ZZL000) • Jeti Spectra head 24 SL PH 3324 (E91UE000) • Vinyl Loader (E9WKB000) • Vinyl Roller Assy (E9ZUA000) • Spare parts kit for Jeti 3324 (E9V4C000) • Backlit camera (E9Z2P) Ncjdpfxewh Shce Acmow • Complete set of new filters (12 pieces) • 10 meters of new hoses also included • Three sets of new connectors • Original cleaning device for the ink system of the machine Including EXHAUST HOOD over the whole machine

Year of construction: 2019, condition: like new (used), MUT RWO 360/400-1150 Retort Heat Treatment Furnace - Like new: hardly used - Documentation available (both electronic and physical) - Pallet with spare parts included TECHNICAL DATA Ncsdpfx Ajiryyaocmew System type: RWO 360/400-1150 Furnace chamber temperature: ≤ 1150 °C for max. 1 hour Operating temperature: ≤ 1100 °C, ≤ 1050 °C in a vacuum Control stability: ± 2 K Temperature homogeneity: ± 6 K in the range of 600 °C to 1150 °C at the end of the stabilization period Control voltage: 230 VAC / 24 VDC Furnace working space: 360 x 400 mm Load: ≤ 50 kg Heating: Three-zone Pressure: ≤ 350 mbar Final vacuum pressure in the cold state: < 5 * 10-5 mbar in a clean, dry furnace Installation area: 900 x 1900 x 3000 mm Total system weight approx.: 1500 kg Sound pressure level: < 70 dB We assume no liability for the accuracy, completeness, and currency of the information provided.

Condition: ready for operation (used), Year of construction: 2014, An industrial large-format digital printer is offered. Max. print area: 3020mm x 2020mm, compressed air requirement: 7-10bar (100-150PSI), short-circuit withstand strength: 10kA, control: PLC. Equipped with UV curing system, vacuum table. Weight: approx. 3750kg, overall dimensions X/Y/Z: approx. 5950mm/2900mm/1550mm. Inspection possible by arrangement. Ncsdpfx Aezcfibscmew

Condition: used, Panel for LP 82. Ncjdpfjbwlqwjx Acmsw Out of a well working machine.

Year of construction: 2009, condition: excellent (used), machine/vehicle number: 104/1656, Size 60 x 75 cm, only for turning (without airing), with fixed control desk Ncsdpfx Acshqhcismjw Machine nr: 104/1656

Year of construction: 2026, condition: new, NEW from ECO3 Factory - expires minimum 18 Months after purchase. ECO3 HNS 600BD Film 338 mm x 60 m Ncjdpfxob Rlbfe Acmsw 33,8 cm width - 60 m length Specification: 600BD Code: 4LGNQ For many different Imagesetters - e.q. AccuSet and Avantra 25 / 30 with Redlight-Laser 650 - 670 nm

Year of construction: 2021, condition: new, functionality: fully functional, ANAPURNA H1650i LED UV Printing System: The entry-level, wide-format hybrid Anapurna H1650i LED is perfect for sign shops, digital printing houses, photo labs and mid-sized graphic screen printers looking to combine board and roll printing jobs. The engines print up to 1.65m wide for both outdoor and indoor jobs. The Anapurna H1650i LED is equipped with UV LED lamps, allowing you to print on a wider media mix, saving energy, cost and time. The white ink function allows you to print on transparent materials for backlit applications or print white as a spot color. Rigid Media Maximum Width: 165 cm (5.4 ft), 160 cm (5.2 ft) with borderless printing Maximum Length: 3.2 m (10.5 ft) – 4 rigid tables (2 rear and 2 front) Minimum Size: A2 Landscape (60 x 42 cm – 1.97 x 1.4 ft) Thickness Nodpfxsy It T Ho Acmjcw Minimum Thickness: 1 mm (0.04”), Maximum Thickness: 45 mm (1.77”) Maximum Weight: 10 kg/m² on print table (22 lbs) Flexible Media Maximum Width: 165 cm (5.4 ft) Maximum Length n/a – limited by weight and diameter Thickness Min. 0.2 mm, Maximum Weight 50 kg (110 lbs)

Year of construction: 1971, condition: excellent (used), Horizontal internal broaching machine Arthur Klink RIW 16x1800 -WAG 718- Manufacturer: Arthur Klink Type: RIW 16 x 1800 Year of manufacture: 1971 Max. Tractive force: 16t Max. Stroke: 1800mm Nodpfx Aohpqquecmecw Max. Cutting speed: 7m/min Max. Return speed: 25m/min Max. Tool diameter: Ø 95mm Weight: 4,8to

Condition: used, We have a large selection of used parts for CTP SCREEN PTR 4100 / PTR 4300 and AGFA ACCENTO I and II. Ncodpsy Tpd Ssfx Acmsw Contact us for pricing and availability. Secure worldwide shipping via UPS.