Edgebanding machines Offers
Unit carrier, clamping plate traversing table, for unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine
Sfonowluz
-HOMAG unit carrier for milling units
-with heavy leadership
-laterally movable
-with counter
-Table height: 285 mm
-Table surface: 1210 x 295 mm
-Table thickness: 18 mm
-Dimens...
Made in Germany
Technical specifications:
Board thickness: 60 mm
Edge thickness: 12 mm
Workpiece thickness: 8-60 mm
Material thickness: 0.4 -12 mm
Feed speed: 11-16 m/min
Work height: 950 mm
Btd7ipvxs9
Connected value: 15 kW
Dimensions:
Length: 6860 mm
Width: 900 mm
Height: 1600 mm
Weight: 2800 Kg
Notes:
Availability immediately
One-sided automatic edge banding machine with pre-milling unit, direct glue application to straight workpieces (EVA-PUR Glue pot with run-out function/optional), 2-motor HF-cut-off saw station, HF-top and bottom Multiprofile milling unit, 2-motor corner rounding unit, chain feed, motorized beam pressure with encoder and ball-bearing double roller top pressure, extendable work piece support, signal lamp for work piece sequence, synchronization of working units by encoder as well as L-Motion contr...
touch screen,
swivel-mounted control panel,
program memory,
automatic pressure bridge adjustment,
feed by means of transport chain,
extendable workpiece support,
diamond milling cutter in synchronous and counter-rotation,
strip magazine,
stand-by function,
Glu Jet cartridge system,
Cartridge system with tactile nozzle,
use of PUR adhesives possible,
printing unit with driven roller,
pneumatic control of the printing unit,
cross-cut saw with 2 HF motors,
cross-cut saw can be swivelled pneumatical...
The machine was completely adjusted and serviced by Brandt only 2 years ago.
Since then it has been in operation only a little, because a larger machine is available. Machine can be viewed with pleasure under power.
Machine is not cleaned.
edge thickness: 0,4 - 3,0 mm
Edge height: max. 45 mm (with 3mm max. 30mm)
workpiece thickness: 8 - 40 mm
Workpiece length: min. 140 mm
Bs9vadsn7y
workpiece width: min. 60 mm
feed rate: 9 m / min
glue system: glue tank
crosscut saw unit
flush radius chamfering...
Used machine
Year of construction: 1983
Hlgcp8tvk
for pre-coated edge material
Edge material up to 1,3 mm
with roller cap
with flush caps with knife
with flush milling / chamfer milling top / bottom with HF motors
Location: Röllbach
availability: short term
Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine
-HOMAG trimming unit for trimming the protruding edges on the front and rear edges
-with heavy leadership
-Milling unit: swiveling
-2x engines Perske
-Motor type:
-Power: 0.22 kW
-Voltage: volts
-Frequency: Hz
-Speed: 18,000 rpm
3zebpuv...
Technical specifications:
Working meters: 568.813 M
Panel thickness: 8 - 60 mm
Cpvot3b0
Edge thickness: 0,4 - 6 mm
Panel width: 65 - 140 mm
Feed speed: 11 m/min
Compressed air: 6 bar
Dimensions:
Length: 4400 mm
Width: 1100 mm
Height: 1770 mm
Weight: 1300 Kg
Notes:
Availability immediately
Contour edge banding machine up to 140 mm Work piece thickness, Speed from 2,5 - 12m/min, Quick change glue pot, Glue pot and glue roller teflon coated, Standby function, tilting machine table up to 45° and digital length counter.
Standard machine incl. the following options :
→electropneumatic pre-melting unit for 2 Kg Cartridge
→motorized driving mechanism (patented)
→supporting bars with steel balls
3otuqhxq
60646d25e9b58
Type: Perfect 1424 - Condition: function-tested, good, second-hand - Year of construction: 1997 - Gluing thickness 0,3 to 20 mm - Workpiece thickness 6 to 60 mm - Feed speed 8/16 m/min. - hot-melt glue indication - roll separating knife, pneumatic - front and rear saw capping (2 aggregates) - flush trimming aggregate - radius trimming aggregate - profile drawing blade aggregate - buffing aggregate
Bsrgv8b80p
The machine is intended mainly for of banding the edges of door elements with natural veneer and for processing of profiling.
Working piece thickness 10-60 mm
Working piece length 215 - 3200 mm (80 – 3200 mm if working on a single shoulder)
Opening (fixed shoulder and mobile shoulder) 3200 mm
Feed track advancement speed 10-40 m/min
Edge height 12 - 65 mm
Edging lendht min. 230 mm
Solid wood edging thickness max 25 mm
Roll products ABS, PVC, PP
Gluing zone HM 3002 PU
Panel heting device
Su...
Used machine
Year of construction: 1993
Condition: age-appropriate
Glue-on thickness 0.3 - 13 mm
edge length min. 200 mm
workpiece width min. 85 mm
workpiece length min. 180 mm
workpiece thickness 6-45 mm
Feed speed 13 m/min
Electrical connected load 7 kW
Machine length 4430 mm
Machine width 1020 mm
Machine height 1200 mm
with edge feed 1901 fully automatic
Bmn2ytmmp3
with glue application station cartridge
with trimming unit 1976
with milling unit 1942 for flush milling and chamfering 0 - 15°.
...
Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine
-HOMAG trimming unit for trimming the protruding edges on the front and rear edges
-with heavy leadership
-Milling unit: swiveling
-1x engines Perske
-Motor type:
-Power: 0.75 kW
-Voltage: volts
-Frequency: 300 Hz
Shnvkxjva
-Speed: 8,600...
Technical specifications:
Control Unit: Computer control NC servo-axis control
Control panel: PPC 231 15″ touchscreen
Edgeband height: 65 mm
Panel length: 180 mm
Panel width: 65 mm
Dimensions:
O2nnx
Length: 9200 mm
Width: 2770 mm
Height: 2570 mm
Weight: 5400 Kg
Notes:
Availability immediately
Contour edge banding machine for hot melt glue application to 0.4 - 3.0 mm edge material
→Direct glue application to edging material: Bottom infeed of glue granules resulting in spill proof glue pot. Quick heating-up time after machine omatic start of application roller after approx. 8-10 mins.
→Pressure roller driven by gearmotor infinitely adjustable between 0-15 m/min.
→Automatic edging feed-in and automatic cut-off operation for straight and curved workpieces via footpedal
→Pneumatic cu...
- exhibition machine -
Pre-milling unit with two slide cutters,
Glueing unit,
Cutter,
Flush cross-cut unit with saw and corner rounding function,
Flush radius,
Radius scraper,
Surface scraper
Bh3lqjxgac
----- Technical data -----
Edge thickness of rolled goods: 0.4 - 3 mm,
Thickness of strips: 5 mm,
min. / max. workpiece thickness: 8 - 50 mm,
Minimum length: 190 mm,
Minimum length without caps: 120 mm,
Minimum width: 110 mm,
Feed speed: 7 m/min.,
support plate Ø for edge material: 730 mm,
Dimens...
used, good condition
Make Ott
Atlantic type
Built in 1993
Mach.-No.. C 5995
GS tested
GS-tested for wood dust
Border thickness 10 mm
Workpiece height min. 10 mm max. 40 mm
Workpiece width min. 70 mm
Workpiece length min. 150 mm
Cross-cutting unit swiveling 3 °, 2 x 0.3 kW
Radius chamfer milling with pneumatic infeed 2 x 0.3 kW and
Ctaxkwcc
2 interchangeable motors
Flush milling with pneumatic infeed 2 x 0.7 kW
Radius scraper
Buffing oscillating
Program control PLC
large roll support
Suction conn...
Used unit
Baujhar: 2010
State: maintained
portable hand edge banding unit
for mouldings and straight parts
Blxj9guub8
for mobile and stationary operation
Direct adhesive application for edges from 0.5 to 3 mm thickness and 65 (!) mm height
Inner radii from approx. 25 mm
Heating time 6 min
Temperature 102 - 160°.
Feed rate 4 m /min
Longs container 330 g
Connection 230 V /50 Hz
Weight 7,9 kg
On/off switch for edge transport
availability: short term
Location: Hochheim
Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine
-HOMAG trimming unit for trimming the protruding edges on the front and rear edges
-with heavy leadership
-Milling unit: swiveling
-1x engines Perske
-Motor type:
Loirr
-Power: 0.75 kW
-Voltage: volts
-Frequency: 300 Hz
-Speed: 8,600 rpm...
0,3-8 mm
Workingpiece thickness from to 6-45 mm
Total length 4150 mm
Feed speed 11 m/min.
Bl0bqkqctv
total power requirement 5 kw
Weight 1175 kg
3-1 Machine: Edge banding machine/Edge trimmer/Cut-Off Saw for contour work pieces with hot melt glue application to 0.4 – 3.0 mm material.
→Direct glue application to edging material: Bottom infeed of glue granules resulting in spill proof glue pot. Quick heating-up time after machine stoppage. Automatic start of application roller after approx. 8-10
→Pressure roller driven by gearmotor infinitely adjustable between 0-15m/min
→Automatic edging feed-in and automatic cut-off operation fo...
touch screen,
swivelling control panel,
manual, self-clamping pressure bridge adjustment,
feed by means of transport chain,
extendable workpiece support,
diamond milling cutter in synchronous and counter-rotation,
glue pot,
stand-by function,
cross-cut saw with HF motor,
flush / radius / chamfer trimming unit,
pneumatic changeover milling unit,
milling tools with HM exchangeable plates,
blowing nozzle at the milling aggregate,
corner copying unit with HM exchangeable plates,
radius scraper with ...
second hand
Brandt
Type KTD 51
Year of construction 1998
Lmjkqo3l
Masch.-Nr
Border thickness 0.5 mm - 1.0 mm
Workpiece height min. 10 mm max. 40 mm
Feed approx. 4m / min.
Space requirements approx. 1600 mm x 1400 mm x 1500 mm
Weight about 175 kg
Storage location 97447 Gerolzhofen, unloaded, unpacked
Handover as is, as viewed,
without overhaul,
without guarantee and warranty
Used machine
Year of manufacture: 1989
Condition: Function tested
Equipment and technical data:
Glueing thickness max mm 20
machine length mm 3150
Glueing height max mm 51
Thickness of roll material max mm 3
Workpiece length min mm 140
Workpiece width min mm 60
Change places roll magazine 1
Gluing system cartridge
Flush/radius/fase stations 1
Space requirement LxWxH mm 3150x1800x1375
Weight approx. kg 800
I3fdh3r
Location: Röllbach
Availability: Short term
Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine
-HOMAG trimming unit for trimming the protruding edges on the front and rear edges
-with heavy leadership
Lqmcp
-Milling unit: swiveling
-2x motors
-Motor type:
-Power: 0.23 kW
-Voltage: volts
-Frequency: Hz
-Speed: 18,000 rpm
-Other en...
:0,4-3,0/6,0 mm
Workingpiece thickness from to:8-60 mm
Total length:4380 mm
Y2lawl
Feed speed:10/8 m/min.
total power requirement:7,5 kw
Weight:1050 kg
One-sided automatic edge banding machine with pre-milling unit, direct glue application to straight workpieces (EVA-PUR Glue pot with run-out function/optional), HF-cut-off saw station, HF-top and bottom milling unit, corner rounding unit, chain feed, double roller top pressure, extendable work piece support, signal lamp for work piece sequence and synchronisation of working units by encoder. For ABS, PVC, melamine and
strong wood veneer roll material as well as fixed lengths from 0.4 – 3.0/6.0 ...
-used-
touch screen,
swivel-mounted control panel,
program memory,
manual, self-clamping pressure bridge adjustment,
feed by means of transport chain,
extendable workpiece support,
diamond milling cutter in synchronous and counter-rotation,
glue pot at the bottom,
changing device for glue pot,
stand-by function,
pneumatic control of the pressure unit,
cross-cut saw with 2 HF-motors,
cross-cut saw pneumatically tiltable,
flush / radius trimming unit,
motorized positioning control milling unit,
mi...
mit Radiusfräser oben und unten
Lagerort: Nattheim
Jvd2ji
Second-hand machineBuilt: 1991Condition: Function testedEquipment and technical data: Gluing station cartridge crosscut saw 2-motoredFlush trimming unitRadius trimming unitRadius scraperScrew catch boxGlue thickness: max. 13 mmRoll material: 3 mmFeed: 13 m /minPlate thickness: 6-45 mmBlue height: max. 51 mmWorkpiece length: min. 150 mmWorkpiece width: min. 180 mmMachine length: 5030 mmWeight: approx. 1300 kg
Djleepj
Unit carrier, clamping plate traversing table, for unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine
-HOMAG unit carrier for milling units
-with heavy leadership
Cs7vcfby
-laterally movable
-with counter
-Table height: 342 mm
-Table surface: 1715 x 225 mm
-Table thickness: 115 mm
-Dimens...
used, very well maintained machine, little used
Ott
Type U 204
Year of construction 1991
Mach.-No.. U / 5311
Edge thickness 20 mm
Edge height 60 mm
Strong edges up to 20 mm
Caps from the roll to 3 mm
flush trimming
Flush-radius milling
1 free space
Autom. edge magazine
2 feed rates
Bn0pl90hge
Granulate quick heating
big roll pad
Freely loaded, unpacked -ab location
Delivery in actual condition as visited, free from the end of November
Machine can be inspected and tested during operation
One-sided automatic edge banding machine with pre-milling
unit, direct glue application to straight workpieces (EVA-PUR
Glue pot with run-out function/optional), HF-cut-off saw station,
HF-top and bottom milling unit, chain feed, double roller
top pressure, extendable work piece support, signal lamp
for work piece sequence and synchronisation of working units
by encoder. For ABS, PVC, melamine and strong wood veneer
roll material as well as fixed lengths from 0.4 – 3.0/6.0 mm
and of 8 – 60 mm wo...
bis 6 mm
Vti28e
Workingpiece thickness from to 8 - 42 mm
Total length 5300 mm
Feed speed 12 m/min.
total power requirement 12,5 kw
Weight 2100 kg
min. Werkstückdicke : 12 mmKappsäge : starr 90° MaschinenNummer : Gewicht ca. : 70 kgMaße : ca. 835 x 350 x 350 mmMotorleistung : ca.0,75 kWDas Aggregat ist ein optionales Anbauteil zur F10 - Fräsmaschineund dient zum exakten Kappen des vorderen und hinteren Kanten-überstandes mittels Kappsäge mit ziehendem Festanschläge sind je nach Kantenmaterialdicke und Werk-stückform schnell verstellbar.
Lagerort: Nattheim
Bx9il
Used machine
Year of construction: 1994
with quick heat adhesive container
with chop saw up to 5 mm edge thickness
with milling station equipped on request with combined indexable insert milling cutters
for radius, straight and chamfer milling
Outriggers, foldable and extendable to the front
with trolley
availability: short term
Location: Röllbach
Ibvqzoclm
Modular unit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine
-HOMAG trimming unit for trimming the protruding edges on the front and rear edges
-with heavy leadership
-Milling unit: swiveling
-2x motors
-Motor type:
-Power: 0.23 kW
-Voltage: volts
-Frequency: Hz
-Speed: 18,000 rpm
S0xbjp2us
-Other engines...
used, good condition
manufactured by Brandt
Lhfw08hg
type F10 + EK 11 - trimming
built in 1988
Masch.-No.
required space ca. 1100 mm x 1100 mm x 1700 mm
located in 97447 Gerolzhofen, free on truck, unpacked
sale in current condition as seen,
without revision,
without guarantee and warranty
8 mm
workpiece height max. 65 mm
Vt3cjq
feed 10 m/min
Technische Daten:
- min. / max. Kantendicke 0,4 - 3 mm
- min. / max. Werkstückhöhe 10 - 60 mm
- min. Werkstückbreite 80 mm
- min. Werkstücklänge 80 mm
- Motor Vorschub 2,2 kW
- stufenlose Vorschubgeschwindigkeit 12/16/20 m/min.
- schwenkbares Bedienpult am Maschineneinlauf in Augenhöhe
- beheiztes Einlauflineal zur Werkstückvorwärmung 0,12 kW
- Druckzone mit pneumatisch angetriebener Hauptandruckrolle und Nachruckrollen zur
Verdichtung der Leimfuge
- Zentral einstellbarer Oberdruck
- Leimbec...
*** 2x Fräsmotoren fehlen ***
Maschine als Ersatzteilspender
Laufrichtung der Platte : vom Bediener nach rechts
max. Anleimerstärke : 60 mm
min. Werkstückdicke : 8 mm
min. Werkstückbreite : 60 mm
Vorschubgeschwindigkeit : 11/18 m/min
Aufheizzeit : 2 min
Fügeaggregat : Nein Stk
Autom. Rollenmagazin : Ja
Kappschere bis : 0.2 - 3.0 mm
Einzelzuführung der Kante : Ja
Massivkantenmagazin : Ja
autom. Beleimung : Leimkartuschen
Kappsäge : Winkeleinstellung Bedienpult
Kombifräsaggregat : Ja
A...
Used machineBuilt: 2011Condition: very well maintained/workshop overhauled - edge thickness max. 6mm- SPS control (program controlled)- glue height max. 60mm- joining unit in synchronous and counter rotation (with diamond tools)- glue station cartridge- printing unit pneumatic- cross-cut station pneumatically tiltable to 10°- milling station motorized adjustable (MOT4) DIA- tool- feeler vertical pneumatic adjustable- tilt pneumatic corner copying unit (diamond tool)- radius scraper with motorize...
Gluing unit, gluing part, gluing head, heating basin for edge banding, edge banding machine
-electrically heated
-7x heating rods a 800 WATT
-reconditioned by FavFE-MA-TECH
-2x glue basins available
-Price: per piece
-Dimensions: 190/100/H125 mm
-Weight: 3 kg/piece
Ql3lxtxl3
Edge bander Brandt
type: KD 86
year of manufacture: 1993
for veneer material thickness up to 12 mm
glueing from the roll up to 3 mm with pneumatic clipping station
glueing application unit with Quickmelt-container
solid built pressure zone with 4 rolls
clippping for for front and back
router station flush, chamfer
second router station radius R 3 mm
corner copying
radius spoke shave R 3 mm
wood dust collecting box
ploshing station
pneumtic package for polishing station
extendable support bar f...
used edge banding machine
for edge thickness 0,4 - 12 mm
workpiece thickness 10-55 mm
feed rate 11 m/min
with glue basin, with roller capping, with saw capping, with milling stations, with radius scraper, with fettling station
length 4200 mm
Bskevz3rie
weight approx. 1100 kg
60646d25dc860
Glvqbsd
max. Anleimerstärke : 2 mm
min. Werkstückdicke : 8-50 mm
min. Werkstückbreite : 30 mm
min. Werkstücklänge 150mm
Heizleistung 3,4kW
Aufheizzeit : 2 min
Kappschere bis : 0.2 - 3.0 mm
Einzelzuführung der Kante : Ja
autom. Beleimung : Gebläse
Arbeitshöhe bzw. Aufgabetischhöhe : 750 mm
Gvyda8
Beschreibung : ja
MaschinenNummer : 277
Gewicht ca. : 125 kg
Abmessung : 1000 x 700 x 1350 mm
Lagerort: Nattheim
Second-hand machineBuilding condition: 2010Condition: top overhauled!feed speed stepless 10-18 m/mincontrol edge control 19 with 18,5" touchscreen colour screenjoining unit 1802edge feeding unit 1901glue application station cartridge 1906MG, pressure unit 1913 pneumaticCutting unit 1918Multifunctional trimming unit 1826 MOT 6 with 6-servo axes for flush, radius and chamfer trimmingCopy trimming unit 1983Radius scraper unit incl. pneumatic adjustment 1929 pneumatic adjustment 1929Surface scraper ...
Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor
-Connection plug broken
-Power: 0.4 kW 11300 rpm at 200 Hz
Ql7use0ef
-Voltage: 133 volts
-Acquisition shaft: 20 mm
-Tool: mm
-Dimensions: 250/60/H130 mm
-Weight: 3.8 kg
This may be of interest to you
Machineseeker becomes biggest sponsor of the 2nd Bundesliga in Germany
Sell now on Machineseeker! Over 220,000 inquiries per month
10 valuable tricks for buying used machines online
Morlock Motors official partner of Machineseeker and Truckscout24
Photo gallery: The World's 10 biggest excavators
How to receive 100% of our e-mails
