Circular sawing machines

Altendorf F 45 ElmoDrive

Condition: reconditioned (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: Werksüberarbeitungsnummer: WÜA20111490519800, cutting length (max.): 3,000 mm, cutting width at rip fence: 1,000 mm, saw blade diameter: 450 mm, table length: 840 mm, power: 5 kW (6.80 HP), Equipment: rotational speed infinitely variable, Used machine GM010.0348 Year of manufacture: 2020 F45 ElmoDrive Machine height: 910 mm Control at eye level Document holder directly at the control panel Double-sided tilting (+/- 46°) Max. blade diameter: 450 mm Motor: 5.0 kW (6.8 HP) VARIO Prepared for 2-axis scoring unit Table extension: 840 mm Double roller carriage with carriage length 3000 mm On/Off switch on double roller carriage Predpfx Adew Intysijd PQS centrally positioned Parallel fence DIGIT X 1000 mm Front support roller

Condition: excellent (used), Year of construction: 2022, Specification: Vertical Drill Block with 13 Spindles Horizontal drill block with 4 spindles in the X Horizontal drill block with 2 spindles in the Y Grooving Saw D=100mm Plausibility check 10kw tool change spindle 4 position tool changer Workpiece length max 200-3050mm Workpiece width 70-850mm Workpiece thickness 8-56mm Powertouch screen Woodwop for machine Prjdpfxewtpu Dj Adiod CNC 3D Simulation for the machine Energy Saving Mode

Condition: excellent (used), Altendorf F45 ElmoDrive panel saw, 320 cm sliding table, Vacuum suction cups in the table, Saw aggregate tilting 0-45 degrees, Electronic, motor-driven tilt and height adjustment of saw blade, Right-side fence with motorized adjustment up to 1340 mm, Electronically adjustable 3-axis scorer, 5.5 kW vario motor, speed adjustable via frequency inverter, Maximum blade diameter 500 mm, LED lighting for the scorer, Used machine, in very good condition, Prodpfx Adjxvc Dhjisd Few operating hours.

Condition: new, Year of construction: 2024, functionality: fully functional, cutting length (max.): 3,200 mm, cutting width (max.): 1,300 mm, cutting width at rip fence: 1,300 mm, cutting height (max.): 200 mm, saw blade diameter: 550 mm, power: 5 kW (6.80 HP), sliding table length: 3,200 mm, Exhibition machine F 45 Elmo Drive - Swivel + / - 45 ° Pedpsuh R R Ejfx Adijrd - Cutting height 200 mm - Preparation for scoring unit no. M24038 - Double roller carriage with 3200 mm - Angular mitre fence 3200 mm Digit L - CNC rip fence 1300 mm - Duplex mitre fence 1350 mm manual - Template holder - On/Off switch on the double roller carriage - Front support roller

Condition: used, Sawblade tiltable 0-45 ° Length of the rolling table 3.200, 3.800 mm cutting width 1.300, 1,500 mm Motor output 7,5 kW Cutting height 177 mm Cutting height at 45° 133 mm Saw blade diameter 500 mm Speed 3000/3600/4200 U/min. work height max. 870 mm Pjdpotg Ailofx Adiord Dust suction hood 1x120, 1x100 mm

Condition: used, Year of construction: 2005, functionality: fully functional, cutting width (max.): 1,300 mm, saw blade diameter: 500 mm, table length: 3,400 mm, height adjustment type: electric, power: 5.5 kW (7.48 HP), Panel saw Manufacturer: Altendorf Predsvnrmyopfx Adijd Type: F45 Elmo CE Year of manufacture: 2005 Carriage length: 3,400 mm Cutting width: 1,300 mm Cutting height: approx. 171 mm Max. saw blade diameter: 500 mm Speed: 2,000 - 6,000 rpm Cutting width adjustment: Electric Motor brake: Yes

Condition: reconditioned (used), Year of construction: 2020, machine/vehicle number: Werksüberarbeitungsnummer: WÜA20111490716308, cutting length (max.): 3,800 mm, cutting width (max.): 1,300 mm, saw blade diameter: 500 mm, table length: 1,200 mm, power: 5.5 kW (7.48 HP), Equipment: rotational speed infinitely variable, Template holder TPL 1,200 mm reinforced On/off switch at DRW Prsdpfxewqfxts Adied WGA Digit - L Extendable cross slide extension PA 1,300 mm - CNC Front support roller Laser - kerf indicators

Condition: as good as new (ex-display), Year of construction: 2021, Working width: 520 mm Planing shaft: tersa Pjdpfjgr Udvsx Adijrd Number of knives: 4 Dressing table length: 2720 mm Adjustment dressing table: Lever Hollow point adjustment: no Gap removal display: Scala Hollow pointed joint display: - Dressing stop angle adjustable: yes Motor power: 7 kW Machine length: 2800 mm Machine width: 1000mm Weight: 870 kg

Condition: reconditioned (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: Werksüberarbeitungsnummer: WÜA20101490211358, cutting length (max.): 3,400 mm, cutting width at rip fence: 1,300 mm, saw blade diameter: 450 mm, table length: 840 mm, power: 6.5 kW (8.84 HP), Used machine GM010.0217 Year of manufacture: 2020 Prsdpfjw Imrbsx Adisd F45 ElmoDrive Machine height: 910 mm Eye-level operation Dual-sided tilting (+ / - 46°) Max. blade diameter: 450 mm 6.5 kW (8.8 HP) motor Table extension: 840 mm Double roller carriage with 3400 mm carriage length Miter angle stop CNC parallel fence 1300 mm Front support roller STEG, second support on the double roller carriage

Condition: reconditioned (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 20-11-14-007, cutting length (max.): 3,430 mm, cutting width (max.): 1,300 mm, saw blade diameter: 500 mm, table length: 1,200 mm, Factory-refurbished Altendorf F45 with ElmoDrive control and parallelogram cross-slide! TECHNICAL DETAILS Maximum cutting length: 3,430 mm Maximum cutting width: 1,300 mm Saw blade diameter: 500 mm Table length: 1,200 mm Saw blade projection 90° with single-sided tilting: 179 mm 90° with double-sided tilting: 179 mm +45° with single-sided tilting: 123 mm +45° with double-sided tilting: 123 mm -45° with double-sided tilting: 96 mm Predexc Uhfjpfx Adiod MACHINE DETAILS Dust extraction connections Extraction at the top: Ø = 80 mm Extraction at the bottom: Ø = 120 mm Vacuum pressure: 1,200 Pa at total suction port, Ø = 140 mm Air consumption: v_min = 1,110 m³/h at 20 m/s Air cushion table Compressed air consumption: 200 l/min at 1 bar (max. 400 l/min at max. 3 bar) EQUIPMENT Reinforced TPL support 1,200 mm On/off switch on DRW Extendable cross-slide extension Front support roller Laser - kerf indicator

Condition: used, Year of construction: 1986, From a model shop Used, excellent condition, little used Make: Panhans Type 325 Year of manufacture: 1986 Prodpfewhqw Nex Adiod GS-tested Motor: 4.0 kW Top control panel Planing width: approx. 510 mm Infeed table length: approx. 1600 mm Removal table length: approx. 1150 mm Auxiliary stop Slotted/low-noise table lips Number of knives: 4 Blade system: Strip planer knives Chip thickness indicator Hollow-pointed joint Automatic brake Hollow-pointed joint adjustment Extraction connection: 140 mm diameter Space required: approx. 2800 mm x 800 mm x 1200 mm Weight: approx. 800 kg Storage location: 97447 Gerolzhofen, free on load, unpacked Sold in the current condition, as seen, without warranty or guarantee

Condition: reconditioned (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 20-11-14-902, cutting length (max.): 3,200 mm, cutting width (max.): 1,000 mm, saw blade diameter: 450 mm, table length: 840 mm, Equipment: rotational speed infinitely variable, Manufacturer-refurbished Altendorf F45 with ElmoDrive control & Digit L display! TECHNICAL DETAILS Maximum cutting length: 3,200 mm Maximum cutting width: 1,000 mm Saw blade diameter: 450 mm Table length: 840 mm Saw blade projection 90° single-sided tilt: 154 mm 90° dual-sided tilt: 154 mm +45° single-sided tilt: 105 mm +45° dual-sided tilt: 105 mm -45° dual-sided tilt: 78 mm MACHINE DETAILS Power: 5 kW Predpfjxc T Tmjx Adisd Dust extraction connection Upper extraction: Ø = 80 mm Lower extraction: Ø = 120 mm Suction pressure: 1,200 Pa at total extraction port, Ø = 140 mm Airflow: v_min = 1,110 m³/h at 20 m/s Air cushion table Compressed air consumption: 200 l/min at 1 bar (max. 400 l/min at max. 3 bar) EQUIPMENT Continuously variable speed Dual-sided tilting Scorer preparation Template holder Digit - L PA 1,000 mm - CNC Front support roller

Condition: reconditioned (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: GM010.0310, cutting length (max.): 3,300 mm, cutting width (max.): 1,300 mm, saw blade diameter: 550 mm, input frequency: 50 Hz, power: 7.5 kW (10.20 HP), Manufacturer-refurbished Altendorf F45 with comprehensive ElmoDrive control system! TECHNICAL DETAILS Carriage Lengths and Cutting Lengths Carriage length (double roller carriage): 3,400 mm Pjdow I Rtcspfx Adisrd Cutting length with angle fence: 3,300 mm TIP-SERVO-DRIVE: 2,990 mm Max. blade diameter: 550 mm Saw Blade Blade diameter: 550 mm Blade projection at 90°: 204 mm Blade projection at +45°: 141 mm MACHINE DETAILS Electrical Data Motor power: 7.5 kW Voltage: 380–420 V Frequency: 50 Hz Fuse protection: 25 A Dust Extraction Connection Extraction (top): 80 mm Extraction (bottom): 120 mm Negative pressure: 1,200 Pa at main extraction port, 140 mm Air consumption: min. 1,110 m³/h at 20 m/s Air Cushion Table Compressed air consumption: 200 l/min at 1 bar (max. 400 l/min at max. 3 bar) EQUIPMENT Extendable cross-slide table widening Display DIGIT L

Condition: excellent (used), Year of construction: 2015, HOLZ-HER Sprint 1329 - Used edge banding machine in good condition. - Year of manufacture: 2015 - Includes BARBARIC return conveyor (year: 2017) - Available from end of November/beginning of December 2025 Pjdpfxsxducrs Adiord Please feel free to contact us if you have any questions.

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, cutting length (max.): 2,900 mm, saw blade diameter: 550 mm, power: 7.5 kW (10.20 HP), Altendorf F45 with comprehensive ElmoDrive control equipment! TECHNICAL DETAILS Prjdpswynhpsfx Adied Carriage lengths and cutting lengths Carriage length (double roller carriage): 3,000 mm Cutting length with angle fence: 2,900 mm TIP-SERVO-DRIVE: 2,590 mm Maximum blade diameter: 550 mm Table extension: 840 mm Saw blade Saw blade diameter: 550 mm Saw blade projection at 90°: 204 mm Saw blade projection at +45°: 141 mm MACHINE DETAILS Electrical data Motor power: 7.5 kW Voltage: 380–420 V Frequency: 50 Hz Circuit protection: 25 A Dust extraction connection Extraction top: 80 mm Extraction bottom: 120 mm Negative pressure: 1,200 Pa at connection, 140 mm Air consumption: min. 1,110 m³/h at 20 m/s Air cushion table Compressed air consumption: 200 l/min at 1 bar (max. 400 l/min at max. 3 bar) Dimensions Working height: 910 mm EQUIPMENT Template holder directly at the control Preparation for 2-axis scorer Extended cutting height with one-sided tilt