CREAM TANK 10.000L

APV

Condition: good (used), functionality: fully functional, Used Bottling Line | Used Beverage Line | Soft Drinks NP 625 | ASEPTIC PET BOTTLING LINE Njdjtu Hy Njpfx Ah Uodf Year: 1998 - 1999 Speed: 18,000 Bph 1.5L Line consisting of: SIDEL Blower Model: SBO 16/16 ROUE Number of cavities: 16 Type: rotary CHILLER AND COMPRESSOR NOT INCLUDED Preform elevator Preform rearranger PROCOMAC monoblock Type: ASECTIC Rinser Gravity filler Capper Cap type: prethreaded plastic Sleevering machine Type: rotary Long-run warehouse Steam tunnel OCME Bundler Film-throwing type OCME Palletizer Type: push type Film-laying system Pallet magazine OCME pallet wrapper

Condition: new, Year of construction: 2024, 1. EPS COMPACTOR MOD. SAGITTARIUS-486 (MOD.) Custom IDEAL FOR: Nodpfjmhfd Eex Ah Usdf • Automotive industry, • EPP, EPE packaging manufacturers • EPP load carrier manufacturers • Companies that process PUR soft foam • Specialized disposal operations • Recycling companies. Technical data sheet Materials EPS (polystyrene) *Density reached 350-450 kg/m3 Hourly capacity 30-65 Kg approx. Block size 200 x 200 mm Loading opening (standard) 1,072 x 800 mm Noise level Standard: 76-90 dB Weight 1,200 Kg Dimensions 3,900 x 1,450 h= 2,000 mm Total power 8 kW Power supply 3 x 400V, 50Hz, 32° C E Approved marking How does the compactor work? 1. Simply throw the polystyrene waste into the machine's hopper. 2. The shredder will break the polystyrene waste into smaller flakes measuring 20mm to 50 mm. 3. A drill compactor, positioned under the shredder, will press the polystyrene waste into compact blocks. 4. The final result will be densified blocks of up to 350 kg/m3 *density may vary depending on the type of material to be compacted

Condition: reconditioned (used), Year of construction: 2012, operating hours: 25,895 h, functionality: fully functional, pressing force: 78 t, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 24,000 kg, oil tank capacity: 1,000 l, power: 55 kW (74.78 HP), volume flow: 930 m³/h, Technical data baler: Manufacturer Presona AB Typ LP 80 VHK 1 Year of construction 2012 Total machine operating hours 25,895 hours, as of July 2025 Pump operating hours, effective 14,135 hours, as of July 2025 Number of bales pressed 235,597 pieces, as of July 2025 Press power main press 78,5 tons Specific press capacity 95 N/cm² Press power of pre-press 28 tons Volume of pressing chamber 2,7 m³ Feed channel1,500 x 1,100 mm Theoretic throughput rate 930 m³/h Throughput rate under operating conditions 410 m³/h Bale size 750 x 1,100 mm Driving motor 55 kW Tying system 5 fold vertical, 3-fold horizontal, full automatic Throughput rate with a bulk density of 30 kg/m³ approx. 9 to 12 tonnes/hour, depending on material 50 kg/m³ approx. 14 to 17 tonnes/hour, depending on material 100 kg/m³ approx. 16 to 25 tonnes/hour, depending on material Throughput capacity with MSW (Municipal Solid Waste) approx. 20 to 27 tonnes/hour, depending on material Bale weight 450 up to 600 kg, depends on material and bale length Volume hydraulic oil tank 1,000 l Baler dimensions built up with hopper 10,985 x 3,750 x 4,310 mm (l x w x h) Transport dimensions only baler 10,985 x 2,300 x 2,900 mm (L x w x h) Machine weight baler approx. 24 tons Condition of the press: The machine was partially overhauled and serviced in our workshop and, once the work was complete, tested in manual and automatic mode during operation. The following overhaul work was carried out: Machine cleaned, partially derusted and partially repainted Hydraulic oil tank emptied and cleaned Oil filter and air filter replaced, new hydraulic oil filled Press ram dismantled and cleaned All four rollers removed from the press ram and replaced Wire station with deflection rollers for the lower wire cleaned and made operational Side guides removed from the press ram, smoothed, mounted and readjusted Main hydraulic cylinder dismantled and disassembled for inspection Piston rod replaced, cylinder tube honed Complete seal set replaced, pressure test carried out Ndsdpfxjvwlqqj Ah Ujf Vertical and horizontal needle system for binding dismantled, cleaned, wire deflection rollers made functional and serviced Chain cleaned, greased, chain tension readjusted Drillomat cleaned, wire knife, drill shafts and drill fingers checked, retightened with torque and serviced Door contact switch checked and partially replaced. Emergency stop switch checked. Complete electrical wiring checked and partially replaced. Bearings of the wire guide rollers under the press replaced. New safety grilles for vertical and horizontal binding manufactured and installed. Machine checked, general maintenance work carried out and press tested in manual and automatic mode Scope of delivery: Only the baler will be sold. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: excellent (used), Year of construction: 2008, Weishaupt RGMS 30 dual fuel burner gas+heavy oil Njdpfx Ahemnqbwj Uedf Output: 2600Kw Year: 2008 Viewing by telephone only! Preferred sale to dealers, traders or export. All information without guarantee, subject to errors and prior sale. The seller accepts no liability for typing and data transmission errors. Of course we also take care of all formalities Loading possible

Condition: used, Year of construction: 1989, operating hours: 18,000 h, Used Linear Filling machine Tetra Pak® TBA 8 for sale Ask for more details regarding our special offer for this Used Linear Tetra Pak® TBA 8 Filler. This excellent second hand aseptic linear filling machine has been revised in 2016.  It has a production capacity of 6,000 bottles per hour and was in production for 18,000 hours. It is set up for 1000 ml bottles. The filler is currently stored away and so can not be dry run for demonstration purposes. The filling machine is on sale as-is. Ndedevguymspfx Ah Uef

Condition: as good as new (ex-display), Centrifugal pump Alfa-Laval FM-1A Material: stainless steel, medium: fruit concentrate/fruit juice, flow rate 20.000 l/h, delivery head approx. 25m, power approx. 3 kW, speed approx. 2.900 1/min, inlet/outlet DN50 Nedpfehryyhex Ah Ujdf 1 VA-tank, vertical, cylindrical, closed 1 VA-subframe for pump and tank

Condition: excellent (used), Due to the dimensions, the tanks are cut into pieces and welded by us at the customer's site. Height 4,30m, Lenght 11m The cyllinder is made of AISI316 steel, the upper and lower heads are made of duplex steel, but AISI316 steel can be ordered. Welding price is discussed separately. 2 units available. Ndsdpsma Dgusfx Ah Usf We also offer 300m3 with dimensions 6.40 x 11.5 m for the price of 72900€ and 2 units 500 m3 with dimensions 8x 11.50 m for 108900 €.

Condition: good (used), Machinery from honey processing factory. DC Norris hotrooms, DC Norris settling tanks, DC Norris holding tanks, crystallised tanks, super seed tanks, pump, filter sets, various filling lines to fill squeezy bottles, glass jars and plastic buckets. Nsdpfx Aopcibmoh Ujdf

Year of construction: 1992, condition: used, Plate heat exchanger for milk processing Ndjdpfx Aoh Eulgjh Uof

Year of construction: 2025, condition: new, Automated pallet dispenser is the backbone of your automation processes. Loaded with up to 10 euro pallets (1200x800 or 1200x1200), it removes the need to prepare each pallet manually, saving time and reducing strain on employees. Instead, the unit dispenses pallets with a push of a button, or a pre-set algorithm onto a motorised roller conveyor, which transports them for further processing. PD-10 can be used in line with various palletising solutions. Fits up to 10 euro pallets Loaded up with a forklift Reduces physical strain Increases efficiency Njdpfx Ahehbg Uxj Uedf